* [GIT PULL] mtd: Changes for 4.16
@ 2018-01-29 9:34 Boris Brezillon
0 siblings, 0 replies; only message in thread
From: Boris Brezillon @ 2018-01-29 9:34 UTC (permalink / raw)
To: Linus Torvalds
Cc: Brian Norris, Richard Weinberger, Cyrille Pitchen, Marek Vasut,
David Woodhouse, linux-mtd@lists.infradead.org,
linux-kernel@vger.kernel.org
Hi Linus,
Here is the MTD PR for 4.16.
Regards,
Boris
The following changes since commit 4fbd8d194f06c8a3fd2af1ce560ddb31f7ec8323:
Linux 4.15-rc1 (2017-11-26 16:01:47 -0800)
are available in the git repository at:
git://git.infradead.org/linux-mtd.git tags/mtd/for-4.16
for you to fetch changes up to 571cb17b23eccc22f18c4fc0a0fc34cf0abca7ef:
Merge tag 'nand/for-4.16' of git://git.infradead.org/linux-mtd into mtd/next (2018-01-29 09:58:36 +0100)
----------------------------------------------------------------
MTD changes:
Core changes:
* Rework core functions to avoid duplicating generic checks in
NAND/OneNAND sub-layers
* Update the MAINTAINERS entry to reflect the fact that MTD
maintainers now use a single git tree
Driver changes:
* CFI: use macros instead of inline functions to limit stack
usage and make KASAN happy
NAND changes:
Core changes:
* Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
* Introduce the ->exec_op() infrastructure
* Rework NAND buffers handling
* Fix ECC requirements for K9F4G08U0D
* Fix nand_do_read_oob() to return the number of bitflips
* Mark K9F1G08U0E as not supporting subpage writes
Driver changes:
* MTK: Rework the driver to support new IP versions
* OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
DT support
* Marvell: Add a new driver to replace the pxa3xx one
SPI NOR changes:
Core changes:
* Add support to new ISSI and Cypress/Spansion memory parts.
* Fix support of Micron memories by checking error bits in the FSR.
* Fix update of block-protection bits by reading back the SR.
* Restore the internal state of the SPI flash memory when removing the
device.
Driver changes:
* Maintenance for Freescale, Intel and Metiatek drivers.
* Add support of the direct access mode for the Cadence QSPI controller.
----------------------------------------------------------------
Aaron Sierra (1):
mtd: spi-nor: Check that BP bits are set properly
Angelo Dureghello (1):
mtd: spi-nor: add support for ISSI is25lp128
Antonio Borneo (1):
mtd: mchp23k256: propagate return value of spi_sync()
Arnd Bergmann (2):
mtd: cfi: convert inline functions to macros
mtd: onenand: omap2: print resource using %pR format string
Bean Huo (beanhuo) (1):
mtd: spi-nor: check FSR error bits for Micron memories
Boris Brezillon (15):
mtd: nand: hynix: Don't wait after applying new read-retry params
mtd: nand: provide several helpers to do common NAND operations
mtd: nand: force drivers to explicitly send READ/PROG commands
mtd: nand: denali: Avoid using ecc->code_buf as a temporary buffer
mtd: nand: Only allocate ecc->{calc, code}_buf when actually needed
MAINTAINERS: Move all MTD related branches to a single repo
mtd: Do not allow MTD devices with inconsistent erase properties
mtd: Add an helper to make erase request aligned on ->erasesize
Merge tag 'gpmc-omap-for-v4.16-immutable' of https://github.com/rogerq/linux into nand/next
mtd: mtdpart: Make ECC stat handling consistent
mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing
mtd: Remove duplicate checks on mtd_oob_ops parameter
mtd: nand: gpmi: Fix subpage reads
Merge tag 'spi-nor/for-4.16' of git://git.infradead.org/linux-mtd into mtd/next
Merge tag 'nand/for-4.16' of git://git.infradead.org/linux-mtd into mtd/next
Christophe JAILLET (5):
mtd: onenand: samsung: use devm_ function to simplify code and fix some leaks
mtd: onenand: samsung: return an error if 'mtd_device_parse_register()' fails
mtd: onenand: samsung: Propagate the error returned by 'onenand_scan()'
mtd: onenand: samsung: Remove a useless include
mtd: onenand: samsung: remove incorrect __iomem annotation
Colin Ian King (4):
mtd: mtdswap: make array 'name' static const, shrinks object size
mtd: sharpslpart: fix overflow on block_adr calculation
mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed"
mtd: nand: marvell: remove redundant variable 'oob_len'
Fabio Estevam (3):
dt-bindings: mtd: fsl-quadspi: Pass the qspi clock names
mtd: nand: brcmnand: Add a NULL check for devm_kasprintf()
mtd: nand: qcom: Add a NULL check for devm_kasprintf()
Guochun Mao (1):
mtd: mtk-nor: modify functions' name more generally
Gustavo A. R. Silva (1):
mtd: nand: gpmi: replace _manual_ swap with swap macro
Hou Zhiqiang (2):
mtd: spi-nor: add an API to restore the status of SPI flash chip
mtd: m25p80: restore the status of SPI flash when exiting
Jagdish Gediya (1):
mtd: nand: ifc: update bufnum mask for ver >= 2.0.0
Jesse Chan (1):
mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
Julia Lawall (1):
mtd: fsl-quadspi: account for const type of of_device_id.data
Kamal Dasu (1):
mtd: nand: brcmnand: Disable prefetch by default
Ladislav Michl (15):
memory: omap-gpmc: Make 'bank-width' property optional
mtd: onenand: Remove obsolete url from Kconfig help
mtd: nand: samsung: Disable subpage writes on E-die NAND
dt-bindings: mtd: gpmc-onenand: Update properties description
ARM: dts: OMAP2+: Add compatible property to onenand node
ARM: dts: omap3-igep: Update onenand node timings
mtd: onenand: omap2: Remove regulator support
mtd: onenand: omap2: Remove skip initial unlocking support
mtd: onenand: omap2: Remove partitioning support from platform data
mtd: onenand: omap2: Account waiting time as waiting on IO
mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation
mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific
mtd: onenand: omap2: Decouple DMA enabling from INT pin availability
mtd: onenand: omap2: Configure driver from DT
ARM: OMAP2+: Remove gpmc-onenand
Masahiro Yamada (6):
mtd: nand: remove unnecessary extern from driver headers
mtd: nand: denali: rename misleading dma_buf to tmp_buf
mtd: nand: cafe: remove use of NAND_OWN_BUFFERS
mtd: nand: remove unused NAND_OWN_BUFFERS flag
mtd: nand: squash struct nand_buffers into struct nand_chip
mtd: nand: cafe: clean up DMA address setup
Mika Westerberg (1):
spi-nor: intel-spi: Remove unused preopcodes field
Miquel Raynal (16):
mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
mtd: nand: use usual return values for the ->erase() hook
mtd: nand: provide valid ->data_interface during NAND detection
mtd: nand: samsung: add ECC requirements for K9F4G08U0D
mtd: nand: add ->exec_op() implementation
mtd: nand: Fix unfinished comment in nand_init_data_interface()
mtd: mtd_oobtest: Handle bitflips during reads
mtd: nand: Fix nand_do_read_oob() return value
dt-bindings: mtd: document new nand-rb property
dt-bindings: mtd: add Marvell NAND controller documentation
mtd: nand: add reworked Marvell NAND controller driver
mtd: nand: use reworked NAND controller driver with Marvell EBU SoCs
MAINTAINERS: Add entry for Marvell NAND controller driver
mtd: nand: marvell: Fix missing memory allocation modifier
mtd: nand: Fix build issues due to an anonymous union
mtd: nand: sunxi: Fix ECC strength choice
Nicolas Ferre (1):
MAINTAINERS: mtd/nand: update Microchip nand entry
Peter Ujfalusi (2):
mtd: onenand: omap2: Simplify the DMA setup for various paths
mtd: onenand: omap2: Convert to use dmaengine for memcpy
Rafael Gago (1):
mtd: spi-nor: Add support for s25fl128l and s25fl256l
RogerCC Lin (3):
mtd: nand: mtk: update DT bindings
mtd: nand: mtk: Support different MTK NAND flash controller IP
mtd: nand: mtk: Support MT7622 NAND flash controller.
Romain Porte (1):
mtd: spi-nor: Add ISSI is25lp080d support
Sascha Hauer (2):
mtd: nand: gpmi-nand: Remove wrong Kconfig help text
mtd: tests: nandbiterrs: Fix read_page return value
Sean Nyekjaer (2):
mtd: spi-nor: add support for is25lq040b
mtd: spi-nor: indent issi section
Vignesh R (2):
mtd: spi-nor: cadence-quadspi: Refactor indirect read/write sequence.
mtd: spi-nor: cadence-quadspi: Add support for direct access mode
Wei Yongjun (2):
mtd: sharpslpart: make local function sharpsl_nand_cleanup_ftl() static
mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe()
Xiaolei Li (1):
mtd: nand: mtk: use nand_reset() to reset NAND devices in resume function
Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 2 +-
Documentation/devicetree/bindings/mtd/gpmc-onenand.txt | 6 +-
Documentation/devicetree/bindings/mtd/marvell-nand.txt | 123 ++
Documentation/devicetree/bindings/mtd/mtk-nand.txt | 11 +-
Documentation/devicetree/bindings/mtd/nand.txt | 1 +
Documentation/mtd/spi-nor.txt | 3 +
MAINTAINERS | 28 +-
arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 1 +
arch/arm/boot/dts/omap3-igep.dtsi | 30 +-
arch/arm/boot/dts/omap3-n900.dts | 1 +
arch/arm/boot/dts/omap3-n950-n9.dtsi | 1 +
arch/arm/boot/dts/omap3430-sdp.dts | 1 +
arch/arm/configs/mvebu_v7_defconfig | 2 +-
arch/arm/mach-omap2/Makefile | 3 -
arch/arm/mach-omap2/gpmc-onenand.c | 409 ------
arch/arm64/configs/defconfig | 2 +-
drivers/memory/omap-gpmc.c | 163 ++-
drivers/mtd/devices/docg3.c | 70 -
drivers/mtd/devices/m25p80.c | 9 +
drivers/mtd/devices/mchp23k256.c | 18 +-
drivers/mtd/mtdcore.c | 36 +-
drivers/mtd/mtdpart.c | 43 +-
drivers/mtd/mtdswap.c | 5 +-
drivers/mtd/nand/Kconfig | 17 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/atmel/nand-controller.c | 9 +-
drivers/mtd/nand/bf5xx_nand.c | 6 +-
drivers/mtd/nand/brcmnand/brcmnand.c | 38 +-
drivers/mtd/nand/cafe_nand.c | 52 +-
drivers/mtd/nand/denali.c | 84 +-
drivers/mtd/nand/denali.h | 4 +-
drivers/mtd/nand/denali_pci.c | 4 +
drivers/mtd/nand/diskonchip.c | 4 +-
drivers/mtd/nand/docg4.c | 21 +-
drivers/mtd/nand/fsl_elbc_nand.c | 10 +-
drivers/mtd/nand/fsl_ifc_nand.c | 13 +-
drivers/mtd/nand/fsmc_nand.c | 9 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 111 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 46 +-
drivers/mtd/nand/hisi504_nand.c | 9 +-
drivers/mtd/nand/jz4740_nand.c | 16 +-
drivers/mtd/nand/lpc32xx_mlc.c | 7 +-
drivers/mtd/nand/lpc32xx_slc.c | 33 +-
drivers/mtd/nand/marvell_nand.c | 2896 +++++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/mtk_ecc.c | 126 +-
drivers/mtd/nand/mtk_ecc.h | 3 +-
drivers/mtd/nand/mtk_nand.c | 76 +-
drivers/mtd/nand/nand_base.c | 2603 ++++++++++++++++++++++++++++--------
drivers/mtd/nand/nand_bbt.c | 2 +-
drivers/mtd/nand/nand_hynix.c | 129 +-
drivers/mtd/nand/nand_micron.c | 83 +-
drivers/mtd/nand/nand_samsung.c | 19 +
drivers/mtd/nand/nand_timings.c | 21 +-
drivers/mtd/nand/omap2.c | 28 +-
drivers/mtd/nand/pxa3xx_nand.c | 14 +-
drivers/mtd/nand/qcom_nandc.c | 30 +-
drivers/mtd/nand/r852.c | 11 +-
drivers/mtd/nand/sh_flctl.c | 6 +-
drivers/mtd/nand/sm_common.h | 2 +-
drivers/mtd/nand/sunxi_nand.c | 111 +-
drivers/mtd/nand/tango_nand.c | 27 +-
drivers/mtd/nand/tmio_nand.c | 5 +-
drivers/mtd/nand/vf610_nfc.c | 6 +-
drivers/mtd/onenand/Kconfig | 7 +-
drivers/mtd/onenand/omap2.c | 577 +++-----
drivers/mtd/onenand/onenand_base.c | 81 --
drivers/mtd/onenand/samsung.c | 185 +--
drivers/mtd/parsers/sharpslpart.c | 6 +-
drivers/mtd/spi-nor/cadence-quadspi.c | 55 +-
drivers/mtd/spi-nor/fsl-quadspi.c | 8 +-
drivers/mtd/spi-nor/intel-spi.c | 6 -
drivers/mtd/spi-nor/mtk-quadspi.c | 240 ++--
drivers/mtd/spi-nor/spi-nor.c | 75 +-
drivers/mtd/tests/nandbiterrs.c | 2 +-
drivers/mtd/tests/oobtest.c | 21 +
drivers/staging/mt29f_spinand/mt29f_spinand.c | 5 +-
include/linux/mtd/map.h | 130 +-
include/linux/mtd/mtd.h | 28 +
include/linux/mtd/rawnand.h | 443 ++++++-
include/linux/mtd/spi-nor.h | 12 +-
include/linux/omap-gpmc.h | 28 +
include/linux/platform_data/mtd-onenand-omap2.h | 34 -
82 files changed, 7013 insertions(+), 2590 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
delete mode 100644 arch/arm/mach-omap2/gpmc-onenand.c
create mode 100644 drivers/mtd/nand/marvell_nand.c
delete mode 100644 include/linux/platform_data/mtd-onenand-omap2.h
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-01-29 9:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-29 9:34 [GIT PULL] mtd: Changes for 4.16 Boris Brezillon
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.