From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 6/6] arm: dts: sun8i: h3-h8: ir register size should be the whole memory block
Date: Mon, 29 Jan 2018 16:58:10 +0100 [thread overview]
Message-ID: <20180129155810.7867-7-embed3d@gmail.com> (raw)
In-Reply-To: <20180129155810.7867-1-embed3d@gmail.com>
The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 8d40c00d64bb..a9caeda4a574 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -674,7 +674,7 @@
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d@gmail.com>
To: mchehab@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, wens@csie.org,
linux@armlinux.org.uk, sean@mess.org, p.zabel@pengutronix.de,
andi.shyti@samsung.com
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: [PATCH v4 6/6] arm: dts: sun8i: h3-h8: ir register size should be the whole memory block
Date: Mon, 29 Jan 2018 16:58:10 +0100 [thread overview]
Message-ID: <20180129155810.7867-7-embed3d@gmail.com> (raw)
In-Reply-To: <20180129155810.7867-1-embed3d@gmail.com>
The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 8d40c00d64bb..a9caeda4a574 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -674,7 +674,7 @@
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d@gmail.com>
To: mchehab@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, wens@csie.org,
linux@armlinux.org.uk, sean@mess.org, p.zabel@pengutronix.de,
andi.shyti@samsung.com
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v4 6/6] arm: dts: sun8i: h3-h8: ir register size should be the whole memory block
Date: Mon, 29 Jan 2018 16:58:10 +0100 [thread overview]
Message-ID: <20180129155810.7867-7-embed3d@gmail.com> (raw)
In-Reply-To: <20180129155810.7867-1-embed3d@gmail.com>
The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 8d40c00d64bb..a9caeda4a574 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -674,7 +674,7 @@
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
--
2.11.0
next prev parent reply other threads:[~2018-01-29 15:58 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-29 15:58 [PATCH v4 0/6] arm: sunxi: IR support for A83T Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` [PATCH v4 1/6] media: rc: update sunxi-ir driver to get base clock frequency from devicetree Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` [PATCH v4 2/6] media: dt: bindings: Update binding documentation for sunxi IR controller Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` [PATCH v4 3/6] arm: dts: sun8i: a83t: Add the cir pin for the A83T Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-30 8:38 ` Maxime Ripard
2018-01-30 8:38 ` Maxime Ripard
2018-01-30 8:38 ` Maxime Ripard
2018-01-29 15:58 ` [PATCH v4 4/6] arm: dts: sun8i: a83t: Add support for the cir interface Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-30 8:39 ` Maxime Ripard
2018-01-30 8:39 ` Maxime Ripard
2018-01-30 8:39 ` Maxime Ripard
2018-01-29 15:58 ` [PATCH v5 5/6] arm: dts: sun8i: a83t: bananapi-m3: Enable IR controller Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
2018-01-30 8:40 ` Maxime Ripard
2018-01-30 8:40 ` Maxime Ripard
2018-01-30 8:40 ` Maxime Ripard
2018-01-29 15:58 ` Philipp Rossak [this message]
2018-01-29 15:58 ` [PATCH v4 6/6] arm: dts: sun8i: h3-h8: ir register size should be the whole memory block Philipp Rossak
2018-01-29 15:58 ` Philipp Rossak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180129155810.7867-7-embed3d@gmail.com \
--to=embed3d@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.