From: Denis Kenzior <denkenz@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Denis Kenzior <denkenz@gmail.com>
Subject: [PATCH 4/6] mac80211: Send control port frames over nl80211
Date: Wed, 31 Jan 2018 15:33:27 -0600 [thread overview]
Message-ID: <20180131213329.25322-5-denkenz@gmail.com> (raw)
In-Reply-To: <20180131213329.25322-1-denkenz@gmail.com>
If userspace requested control port frames to go over 80211, then do so.
The control packets are intercepted just prior to delivery of the packet
to the underlying network device.
Pre-authentication type frames (protocol: 0x88c7) are also forwarded
over nl80211.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
---
net/mac80211/cfg.c | 2 ++
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/mlme.c | 2 ++
net/mac80211/rx.c | 34 +++++++++++++++++++++++++++++-----
4 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 46028e12e216..f53bfb27295f 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -925,6 +925,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
*/
sdata->control_port_protocol = params->crypto.control_port_ethertype;
sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt;
+ sdata->control_port_over_nl80211 = false;
sdata->encrypt_headroom = ieee80211_cs_headroom(sdata->local,
¶ms->crypto,
sdata->vif.type);
@@ -934,6 +935,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
params->crypto.control_port_ethertype;
vlan->control_port_no_encrypt =
params->crypto.control_port_no_encrypt;
+ vlan->control_port_over_nl80211 = false;
vlan->encrypt_headroom =
ieee80211_cs_headroom(sdata->local,
¶ms->crypto,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 26900025de2f..6f91aea6a4cb 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -899,6 +899,7 @@ struct ieee80211_sub_if_data {
u16 sequence_number;
__be16 control_port_protocol;
bool control_port_no_encrypt;
+ bool control_port_over_nl80211;
int encrypt_headroom;
atomic_t num_tx_queued;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 39b660b9a908..fc71a906939b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4830,6 +4830,8 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
sdata->control_port_protocol = req->crypto.control_port_ethertype;
sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
+ sdata->control_port_over_nl80211 =
+ req->crypto.control_port_over_nl80211;
sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
sdata->vif.type);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index e755f93ad735..c3abf9e44079 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2243,6 +2243,33 @@ static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx, __le16 fc)
return true;
}
+static void ieee80211_deliver_skb_to_local_stack(struct sk_buff *skb,
+ struct ieee80211_rx_data *rx)
+{
+ struct ieee80211_sub_if_data *sdata = rx->sdata;
+ struct net_device *dev = sdata->dev;
+
+ if (unlikely((skb->protocol == sdata->control_port_protocol ||
+ skb->protocol == cpu_to_be16(ETH_P_PREAUTH)) &&
+ sdata->control_port_over_nl80211)) {
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+ bool noencrypt = status->flag & RX_FLAG_DECRYPTED;
+ struct ethhdr *ehdr = eth_hdr(skb);
+
+ if (!cfg80211_rx_control_port(dev, skb->data, skb->len,
+ ehdr->h_source,
+ be16_to_cpu(skb->protocol),
+ noencrypt))
+ dev_kfree_skb(skb);
+ } else {
+ /* deliver to local stack */
+ if (rx->napi)
+ napi_gro_receive(rx->napi, skb);
+ else
+ netif_receive_skb(skb);
+ }
+}
+
/*
* requires that rx->skb is a frame with ethernet header
*/
@@ -2327,13 +2354,10 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
#endif
if (skb) {
- /* deliver to local stack */
skb->protocol = eth_type_trans(skb, dev);
memset(skb->cb, 0, sizeof(skb->cb));
- if (rx->napi)
- napi_gro_receive(rx->napi, skb);
- else
- netif_receive_skb(skb);
+
+ ieee80211_deliver_skb_to_local_stack(skb, rx);
}
if (xmit_skb) {
--
2.13.5
next prev parent reply other threads:[~2018-01-31 21:33 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-31 21:33 [RFC v3 0/6] EAPoL over NL80211 Denis Kenzior
2018-01-31 21:33 ` [PATCH 1/6] uapi: Add 802.11 Preauthentication to if_ether Denis Kenzior
2018-01-31 21:33 ` [PATCH 2/6] nl80211: Add CONTROL_PORT_OVER_NL80211 attribute Denis Kenzior
2018-01-31 21:33 ` [PATCH 3/6] nl80211: Add CMD_CONTROL_PORT_FRAME API Denis Kenzior
2018-01-31 21:45 ` Johannes Berg
2018-01-31 22:01 ` Denis Kenzior
2018-01-31 22:03 ` Johannes Berg
2018-01-31 21:33 ` Denis Kenzior [this message]
2018-01-31 21:50 ` [PATCH 4/6] mac80211: Send control port frames over nl80211 Johannes Berg
2018-01-31 21:33 ` [PATCH 5/6] nl80211: Implement TX of control port frames Denis Kenzior
2018-01-31 21:52 ` Johannes Berg
2018-01-31 21:53 ` Johannes Berg
2018-01-31 21:58 ` Denis Kenzior
2018-01-31 22:00 ` Johannes Berg
2018-01-31 21:33 ` [PATCH 6/6] mac80211: Add support for tx_control_port Denis Kenzior
2018-01-31 22:00 ` [RFC v3 0/6] EAPoL over NL80211 Johannes Berg
2018-02-01 1:09 ` Denis Kenzior
2018-02-01 8:54 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180131213329.25322-5-denkenz@gmail.com \
--to=denkenz@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.