All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 06/16] mmc: sdhci_omap: Add support to set IODELAY values
Date: Mon, 5 Feb 2018 18:20:19 +0530	[thread overview]
Message-ID: <20180205125029.21570-7-kishon@ti.com> (raw)
In-Reply-To: <20180205125029.21570-1-kishon@ti.com>

The data manual of J6/J6 Eco recommends to set different IODELAY values
depending on the mode in which the MMC/SD is enumerated in order to
ensure IO timings are met.

Add support to set the IODELAY values depending on the various MMC
modes using the pinctrl APIs.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci-omap.c | 147 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index e24ae903f7ba..8b6170cd689b 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -90,8 +90,12 @@
 
 #define MAX_PHASE_DELAY		0x7C
 
+/* sdhci-omap controller flags */
+#define SDHCI_OMAP_REQUIRE_IODELAY	BIT(0)
+
 struct sdhci_omap_data {
 	u32 offset;
+	u8 flags;
 };
 
 struct sdhci_omap_host {
@@ -102,8 +106,16 @@ struct sdhci_omap_host {
 	struct sdhci_host	*host;
 	u8			bus_mode;
 	u8			power_mode;
+	u8			timing;
+	u8			flags;
+
+	struct pinctrl		*pinctrl;
+	struct pinctrl_state	**pinctrl_state;
 };
 
+static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
+static void sdhci_omap_stop_clock(struct sdhci_omap_host *omap_host);
+
 static inline u32 sdhci_omap_readl(struct sdhci_omap_host *host,
 				   unsigned int offset)
 {
@@ -436,6 +448,31 @@ static int sdhci_omap_start_signal_voltage_switch(struct mmc_host *mmc,
 	return 0;
 }
 
+static void sdhci_omap_set_timing(struct sdhci_omap_host *omap_host, u8 timing)
+{
+	int ret;
+	struct pinctrl_state *pinctrl_state;
+	struct device *dev = omap_host->dev;
+
+	if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
+		return;
+
+	if (omap_host->timing == timing)
+		return;
+
+	sdhci_omap_stop_clock(omap_host);
+
+	pinctrl_state = omap_host->pinctrl_state[timing];
+	ret = pinctrl_select_state(omap_host->pinctrl, pinctrl_state);
+	if (ret) {
+		dev_err(dev, "failed to select pinctrl state\n");
+		return;
+	}
+
+	sdhci_omap_start_clock(omap_host);
+	omap_host->timing = timing;
+}
+
 static void sdhci_omap_set_power_mode(struct sdhci_omap_host *omap_host,
 				      u8 power_mode)
 {
@@ -472,6 +509,7 @@ static void sdhci_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	omap_host = sdhci_pltfm_priv(pltfm_host);
 
 	sdhci_omap_set_bus_mode(omap_host, ios->bus_mode);
+	sdhci_omap_set_timing(omap_host, ios->timing);
 	sdhci_set_ios(mmc, ios);
 	sdhci_omap_set_power_mode(omap_host, ios->power_mode);
 }
@@ -680,6 +718,7 @@ static const struct sdhci_pltfm_data sdhci_omap_pdata = {
 
 static const struct sdhci_omap_data dra7_data = {
 	.offset = 0x200,
+	.flags	= SDHCI_OMAP_REQUIRE_IODELAY,
 };
 
 static const struct of_device_id omap_sdhci_match[] = {
@@ -688,6 +727,108 @@ static const struct of_device_id omap_sdhci_match[] = {
 };
 MODULE_DEVICE_TABLE(of, omap_sdhci_match);
 
+static struct pinctrl_state
+*sdhci_omap_iodelay_pinctrl_state(struct sdhci_omap_host *omap_host, char *mode,
+				  u32 *caps, u32 capmask)
+{
+	struct device *dev = omap_host->dev;
+	struct pinctrl_state *pinctrl_state = ERR_PTR(-ENODEV);
+
+	if (!(*caps & capmask))
+		goto ret;
+
+	pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
+	if (IS_ERR(pinctrl_state)) {
+		dev_err(dev, "no pinctrl state for %s mode", mode);
+		*caps &= ~capmask;
+	}
+
+ret:
+	return pinctrl_state;
+}
+
+static int sdhci_omap_config_iodelay_pinctrl_state(struct sdhci_omap_host
+						   *omap_host)
+{
+	struct device *dev = omap_host->dev;
+	struct sdhci_host *host = omap_host->host;
+	struct mmc_host *mmc = host->mmc;
+	u32 *caps = &mmc->caps;
+	u32 *caps2 = &mmc->caps2;
+	struct pinctrl_state *state;
+	struct pinctrl_state **pinctrl_state;
+
+	if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
+		return 0;
+
+	pinctrl_state = devm_kzalloc(dev, sizeof(*pinctrl_state) *
+				     (MMC_TIMING_MMC_HS200 + 1), GFP_KERNEL);
+	if (!pinctrl_state)
+		return -ENOMEM;
+
+	omap_host->pinctrl = devm_pinctrl_get(omap_host->dev);
+	if (IS_ERR(omap_host->pinctrl)) {
+		dev_err(dev, "Cannot get pinctrl\n");
+		return PTR_ERR(omap_host->pinctrl);
+	}
+
+	state = pinctrl_lookup_state(omap_host->pinctrl, "default");
+	if (IS_ERR(state)) {
+		dev_err(dev, "no pinctrl state for default mode\n");
+		return PTR_ERR(state);
+	}
+	pinctrl_state[MMC_TIMING_LEGACY] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr104", caps,
+						 MMC_CAP_UHS_SDR104);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR104] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr50", caps,
+						 MMC_CAP_UHS_DDR50);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_DDR50] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr50", caps,
+						 MMC_CAP_UHS_SDR50);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR50] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr25", caps,
+						 MMC_CAP_UHS_SDR25);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR25] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr12", caps,
+						 MMC_CAP_UHS_SDR12);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR12] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr_1_8v", caps,
+						 MMC_CAP_1_8V_DDR);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_DDR52] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
+						 MMC_CAP_SD_HIGHSPEED);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_SD_HS] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
+						 MMC_CAP_MMC_HIGHSPEED);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_HS] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs200_1_8v", caps2,
+						 MMC_CAP2_HS200_1_8V_SDR);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_HS200] = state;
+
+	omap_host->pinctrl_state = pinctrl_state;
+
+	return 0;
+}
+
 static int sdhci_omap_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -724,6 +865,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->base = host->ioaddr;
 	omap_host->dev = dev;
 	omap_host->power_mode = MMC_POWER_UNDEFINED;
+	omap_host->timing = MMC_TIMING_LEGACY;
+	omap_host->flags = data->flags;
 	host->ioaddr += offset;
 
 	mmc = host->mmc;
@@ -772,6 +915,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 		goto err_put_sync;
 	}
 
+	ret = sdhci_omap_config_iodelay_pinctrl_state(omap_host);
+	if (ret)
+		goto err_put_sync;
+
 	host->mmc_host_ops.get_ro = mmc_gpio_get_ro;
 	host->mmc_host_ops.start_signal_voltage_switch =
 					sdhci_omap_start_signal_voltage_switch;
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 06/16] mmc: sdhci_omap: Add support to set IODELAY values
Date: Mon, 5 Feb 2018 18:20:19 +0530	[thread overview]
Message-ID: <20180205125029.21570-7-kishon@ti.com> (raw)
In-Reply-To: <20180205125029.21570-1-kishon@ti.com>

The data manual of J6/J6 Eco recommends to set different IODELAY values
depending on the mode in which the MMC/SD is enumerated in order to
ensure IO timings are met.

Add support to set the IODELAY values depending on the various MMC
modes using the pinctrl APIs.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci-omap.c | 147 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index e24ae903f7ba..8b6170cd689b 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -90,8 +90,12 @@
 
 #define MAX_PHASE_DELAY		0x7C
 
+/* sdhci-omap controller flags */
+#define SDHCI_OMAP_REQUIRE_IODELAY	BIT(0)
+
 struct sdhci_omap_data {
 	u32 offset;
+	u8 flags;
 };
 
 struct sdhci_omap_host {
@@ -102,8 +106,16 @@ struct sdhci_omap_host {
 	struct sdhci_host	*host;
 	u8			bus_mode;
 	u8			power_mode;
+	u8			timing;
+	u8			flags;
+
+	struct pinctrl		*pinctrl;
+	struct pinctrl_state	**pinctrl_state;
 };
 
+static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
+static void sdhci_omap_stop_clock(struct sdhci_omap_host *omap_host);
+
 static inline u32 sdhci_omap_readl(struct sdhci_omap_host *host,
 				   unsigned int offset)
 {
@@ -436,6 +448,31 @@ static int sdhci_omap_start_signal_voltage_switch(struct mmc_host *mmc,
 	return 0;
 }
 
+static void sdhci_omap_set_timing(struct sdhci_omap_host *omap_host, u8 timing)
+{
+	int ret;
+	struct pinctrl_state *pinctrl_state;
+	struct device *dev = omap_host->dev;
+
+	if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
+		return;
+
+	if (omap_host->timing == timing)
+		return;
+
+	sdhci_omap_stop_clock(omap_host);
+
+	pinctrl_state = omap_host->pinctrl_state[timing];
+	ret = pinctrl_select_state(omap_host->pinctrl, pinctrl_state);
+	if (ret) {
+		dev_err(dev, "failed to select pinctrl state\n");
+		return;
+	}
+
+	sdhci_omap_start_clock(omap_host);
+	omap_host->timing = timing;
+}
+
 static void sdhci_omap_set_power_mode(struct sdhci_omap_host *omap_host,
 				      u8 power_mode)
 {
@@ -472,6 +509,7 @@ static void sdhci_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	omap_host = sdhci_pltfm_priv(pltfm_host);
 
 	sdhci_omap_set_bus_mode(omap_host, ios->bus_mode);
+	sdhci_omap_set_timing(omap_host, ios->timing);
 	sdhci_set_ios(mmc, ios);
 	sdhci_omap_set_power_mode(omap_host, ios->power_mode);
 }
@@ -680,6 +718,7 @@ static const struct sdhci_pltfm_data sdhci_omap_pdata = {
 
 static const struct sdhci_omap_data dra7_data = {
 	.offset = 0x200,
+	.flags	= SDHCI_OMAP_REQUIRE_IODELAY,
 };
 
 static const struct of_device_id omap_sdhci_match[] = {
@@ -688,6 +727,108 @@ static const struct of_device_id omap_sdhci_match[] = {
 };
 MODULE_DEVICE_TABLE(of, omap_sdhci_match);
 
+static struct pinctrl_state
+*sdhci_omap_iodelay_pinctrl_state(struct sdhci_omap_host *omap_host, char *mode,
+				  u32 *caps, u32 capmask)
+{
+	struct device *dev = omap_host->dev;
+	struct pinctrl_state *pinctrl_state = ERR_PTR(-ENODEV);
+
+	if (!(*caps & capmask))
+		goto ret;
+
+	pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
+	if (IS_ERR(pinctrl_state)) {
+		dev_err(dev, "no pinctrl state for %s mode", mode);
+		*caps &= ~capmask;
+	}
+
+ret:
+	return pinctrl_state;
+}
+
+static int sdhci_omap_config_iodelay_pinctrl_state(struct sdhci_omap_host
+						   *omap_host)
+{
+	struct device *dev = omap_host->dev;
+	struct sdhci_host *host = omap_host->host;
+	struct mmc_host *mmc = host->mmc;
+	u32 *caps = &mmc->caps;
+	u32 *caps2 = &mmc->caps2;
+	struct pinctrl_state *state;
+	struct pinctrl_state **pinctrl_state;
+
+	if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
+		return 0;
+
+	pinctrl_state = devm_kzalloc(dev, sizeof(*pinctrl_state) *
+				     (MMC_TIMING_MMC_HS200 + 1), GFP_KERNEL);
+	if (!pinctrl_state)
+		return -ENOMEM;
+
+	omap_host->pinctrl = devm_pinctrl_get(omap_host->dev);
+	if (IS_ERR(omap_host->pinctrl)) {
+		dev_err(dev, "Cannot get pinctrl\n");
+		return PTR_ERR(omap_host->pinctrl);
+	}
+
+	state = pinctrl_lookup_state(omap_host->pinctrl, "default");
+	if (IS_ERR(state)) {
+		dev_err(dev, "no pinctrl state for default mode\n");
+		return PTR_ERR(state);
+	}
+	pinctrl_state[MMC_TIMING_LEGACY] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr104", caps,
+						 MMC_CAP_UHS_SDR104);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR104] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr50", caps,
+						 MMC_CAP_UHS_DDR50);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_DDR50] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr50", caps,
+						 MMC_CAP_UHS_SDR50);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR50] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr25", caps,
+						 MMC_CAP_UHS_SDR25);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR25] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr12", caps,
+						 MMC_CAP_UHS_SDR12);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR12] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr_1_8v", caps,
+						 MMC_CAP_1_8V_DDR);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_DDR52] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
+						 MMC_CAP_SD_HIGHSPEED);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_SD_HS] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
+						 MMC_CAP_MMC_HIGHSPEED);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_HS] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs200_1_8v", caps2,
+						 MMC_CAP2_HS200_1_8V_SDR);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_HS200] = state;
+
+	omap_host->pinctrl_state = pinctrl_state;
+
+	return 0;
+}
+
 static int sdhci_omap_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -724,6 +865,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->base = host->ioaddr;
 	omap_host->dev = dev;
 	omap_host->power_mode = MMC_POWER_UNDEFINED;
+	omap_host->timing = MMC_TIMING_LEGACY;
+	omap_host->flags = data->flags;
 	host->ioaddr += offset;
 
 	mmc = host->mmc;
@@ -772,6 +915,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 		goto err_put_sync;
 	}
 
+	ret = sdhci_omap_config_iodelay_pinctrl_state(omap_host);
+	if (ret)
+		goto err_put_sync;
+
 	host->mmc_host_ops.get_ro = mmc_gpio_get_ro;
 	host->mmc_host_ops.start_signal_voltage_switch =
 					sdhci_omap_start_signal_voltage_switch;
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	<linux-mmc@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 06/16] mmc: sdhci_omap: Add support to set IODELAY values
Date: Mon, 5 Feb 2018 18:20:19 +0530	[thread overview]
Message-ID: <20180205125029.21570-7-kishon@ti.com> (raw)
In-Reply-To: <20180205125029.21570-1-kishon@ti.com>

The data manual of J6/J6 Eco recommends to set different IODELAY values
depending on the mode in which the MMC/SD is enumerated in order to
ensure IO timings are met.

Add support to set the IODELAY values depending on the various MMC
modes using the pinctrl APIs.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci-omap.c | 147 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index e24ae903f7ba..8b6170cd689b 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -90,8 +90,12 @@
 
 #define MAX_PHASE_DELAY		0x7C
 
+/* sdhci-omap controller flags */
+#define SDHCI_OMAP_REQUIRE_IODELAY	BIT(0)
+
 struct sdhci_omap_data {
 	u32 offset;
+	u8 flags;
 };
 
 struct sdhci_omap_host {
@@ -102,8 +106,16 @@ struct sdhci_omap_host {
 	struct sdhci_host	*host;
 	u8			bus_mode;
 	u8			power_mode;
+	u8			timing;
+	u8			flags;
+
+	struct pinctrl		*pinctrl;
+	struct pinctrl_state	**pinctrl_state;
 };
 
+static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
+static void sdhci_omap_stop_clock(struct sdhci_omap_host *omap_host);
+
 static inline u32 sdhci_omap_readl(struct sdhci_omap_host *host,
 				   unsigned int offset)
 {
@@ -436,6 +448,31 @@ static int sdhci_omap_start_signal_voltage_switch(struct mmc_host *mmc,
 	return 0;
 }
 
+static void sdhci_omap_set_timing(struct sdhci_omap_host *omap_host, u8 timing)
+{
+	int ret;
+	struct pinctrl_state *pinctrl_state;
+	struct device *dev = omap_host->dev;
+
+	if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
+		return;
+
+	if (omap_host->timing == timing)
+		return;
+
+	sdhci_omap_stop_clock(omap_host);
+
+	pinctrl_state = omap_host->pinctrl_state[timing];
+	ret = pinctrl_select_state(omap_host->pinctrl, pinctrl_state);
+	if (ret) {
+		dev_err(dev, "failed to select pinctrl state\n");
+		return;
+	}
+
+	sdhci_omap_start_clock(omap_host);
+	omap_host->timing = timing;
+}
+
 static void sdhci_omap_set_power_mode(struct sdhci_omap_host *omap_host,
 				      u8 power_mode)
 {
@@ -472,6 +509,7 @@ static void sdhci_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	omap_host = sdhci_pltfm_priv(pltfm_host);
 
 	sdhci_omap_set_bus_mode(omap_host, ios->bus_mode);
+	sdhci_omap_set_timing(omap_host, ios->timing);
 	sdhci_set_ios(mmc, ios);
 	sdhci_omap_set_power_mode(omap_host, ios->power_mode);
 }
@@ -680,6 +718,7 @@ static const struct sdhci_pltfm_data sdhci_omap_pdata = {
 
 static const struct sdhci_omap_data dra7_data = {
 	.offset = 0x200,
+	.flags	= SDHCI_OMAP_REQUIRE_IODELAY,
 };
 
 static const struct of_device_id omap_sdhci_match[] = {
@@ -688,6 +727,108 @@ static const struct of_device_id omap_sdhci_match[] = {
 };
 MODULE_DEVICE_TABLE(of, omap_sdhci_match);
 
+static struct pinctrl_state
+*sdhci_omap_iodelay_pinctrl_state(struct sdhci_omap_host *omap_host, char *mode,
+				  u32 *caps, u32 capmask)
+{
+	struct device *dev = omap_host->dev;
+	struct pinctrl_state *pinctrl_state = ERR_PTR(-ENODEV);
+
+	if (!(*caps & capmask))
+		goto ret;
+
+	pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
+	if (IS_ERR(pinctrl_state)) {
+		dev_err(dev, "no pinctrl state for %s mode", mode);
+		*caps &= ~capmask;
+	}
+
+ret:
+	return pinctrl_state;
+}
+
+static int sdhci_omap_config_iodelay_pinctrl_state(struct sdhci_omap_host
+						   *omap_host)
+{
+	struct device *dev = omap_host->dev;
+	struct sdhci_host *host = omap_host->host;
+	struct mmc_host *mmc = host->mmc;
+	u32 *caps = &mmc->caps;
+	u32 *caps2 = &mmc->caps2;
+	struct pinctrl_state *state;
+	struct pinctrl_state **pinctrl_state;
+
+	if (!(omap_host->flags & SDHCI_OMAP_REQUIRE_IODELAY))
+		return 0;
+
+	pinctrl_state = devm_kzalloc(dev, sizeof(*pinctrl_state) *
+				     (MMC_TIMING_MMC_HS200 + 1), GFP_KERNEL);
+	if (!pinctrl_state)
+		return -ENOMEM;
+
+	omap_host->pinctrl = devm_pinctrl_get(omap_host->dev);
+	if (IS_ERR(omap_host->pinctrl)) {
+		dev_err(dev, "Cannot get pinctrl\n");
+		return PTR_ERR(omap_host->pinctrl);
+	}
+
+	state = pinctrl_lookup_state(omap_host->pinctrl, "default");
+	if (IS_ERR(state)) {
+		dev_err(dev, "no pinctrl state for default mode\n");
+		return PTR_ERR(state);
+	}
+	pinctrl_state[MMC_TIMING_LEGACY] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr104", caps,
+						 MMC_CAP_UHS_SDR104);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR104] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr50", caps,
+						 MMC_CAP_UHS_DDR50);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_DDR50] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr50", caps,
+						 MMC_CAP_UHS_SDR50);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR50] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr25", caps,
+						 MMC_CAP_UHS_SDR25);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR25] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "sdr12", caps,
+						 MMC_CAP_UHS_SDR12);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_UHS_SDR12] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr_1_8v", caps,
+						 MMC_CAP_1_8V_DDR);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_DDR52] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
+						 MMC_CAP_SD_HIGHSPEED);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_SD_HS] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
+						 MMC_CAP_MMC_HIGHSPEED);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_HS] = state;
+
+	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs200_1_8v", caps2,
+						 MMC_CAP2_HS200_1_8V_SDR);
+	if (!IS_ERR(state))
+		pinctrl_state[MMC_TIMING_MMC_HS200] = state;
+
+	omap_host->pinctrl_state = pinctrl_state;
+
+	return 0;
+}
+
 static int sdhci_omap_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -724,6 +865,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->base = host->ioaddr;
 	omap_host->dev = dev;
 	omap_host->power_mode = MMC_POWER_UNDEFINED;
+	omap_host->timing = MMC_TIMING_LEGACY;
+	omap_host->flags = data->flags;
 	host->ioaddr += offset;
 
 	mmc = host->mmc;
@@ -772,6 +915,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 		goto err_put_sync;
 	}
 
+	ret = sdhci_omap_config_iodelay_pinctrl_state(omap_host);
+	if (ret)
+		goto err_put_sync;
+
 	host->mmc_host_ops.get_ro = mmc_gpio_get_ro;
 	host->mmc_host_ops.start_signal_voltage_switch =
 					sdhci_omap_start_signal_voltage_switch;
-- 
2.11.0

  parent reply	other threads:[~2018-02-05 12:50 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-05 12:50 [PATCH v2 00/16] mmc: sdhci-omap: Add UHS/HS200 mode support Kishon Vijay Abraham I
2018-02-05 12:50 ` Kishon Vijay Abraham I
2018-02-05 12:50 ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 01/16] mmc: sdhci-omap: Update 'power_mode' outside sdhci_omap_init_74_clocks Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 02/16] mmc: sdhci-omap: Add card_busy host ops Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 03/16] mmc: sdhci-omap: Add custom set_uhs_signaling sdhci_host ops Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 04/16] mmc: sdhci-omap: Add tuning support Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 05/16] mmc: sdhci-omap: Workaround for Errata i802 Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` Kishon Vijay Abraham I [this message]
2018-02-05 12:50   ` [PATCH v2 06/16] mmc: sdhci_omap: Add support to set IODELAY values Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 07/16] mmc: sdhci_omap: Fix sdhci-omap quirks Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 08/16] mmc: sdhci-omap: Add support to override f_max and iodelay from pdata Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-14  9:53   ` Ulf Hansson
2018-02-14  9:53     ` Ulf Hansson
2018-02-14 17:24     ` Tony Lindgren
2018-02-14 17:24       ` Tony Lindgren
2018-02-16  8:08       ` Kishon Vijay Abraham I
2018-02-16  8:08         ` Kishon Vijay Abraham I
2018-02-16  8:08         ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 09/16] mmc: sdhci: Add quirk to disable HW timeout Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-19  8:51   ` Adrian Hunter
2018-02-19  8:51     ` Adrian Hunter
2018-02-19  8:51     ` Adrian Hunter
2018-03-05  9:30     ` Kishon Vijay Abraham I
2018-03-05  9:30       ` Kishon Vijay Abraham I
2018-03-05  9:30       ` Kishon Vijay Abraham I
2018-03-05  9:38       ` Adrian Hunter
2018-03-05  9:38         ` Adrian Hunter
2018-03-14 13:25         ` Kishon Vijay Abraham I
2018-03-14 13:25           ` Kishon Vijay Abraham I
2018-03-14 13:25           ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 10/16] mmc: sdhci: Fix to use data_timer only for data line commands Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-19  8:03   ` Adrian Hunter
2018-02-19  8:03     ` Adrian Hunter
2018-02-19  8:03     ` Adrian Hunter
2018-02-19 12:55     ` Kishon Vijay Abraham I
2018-02-19 12:55       ` Kishon Vijay Abraham I
2018-02-19 12:55       ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 11/16] mmc: sdhci: Program a relatively accurate SW timeout value Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
     [not found]   ` <20180205125029.21570-12-kishon-l0cyMroinI0@public.gmane.org>
2018-02-16  7:17     ` Kishon Vijay Abraham I
2018-02-16  7:17       ` Kishon Vijay Abraham I
2018-02-16  7:17       ` Kishon Vijay Abraham I
2018-02-19  9:24   ` Adrian Hunter
2018-02-19  9:24     ` Adrian Hunter
2018-02-19  9:24     ` Adrian Hunter
2018-02-19 13:13     ` Adrian Hunter
2018-02-19 13:13       ` Adrian Hunter
2018-02-19 13:13       ` Adrian Hunter
2018-02-05 12:50 ` [PATCH v2 12/16] mmc: sdhci-omap: Workaround for Errata i834 Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 13/16] dt-bindings: sdhci-omap: Add K2G specific binding Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 14/16] mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
     [not found] ` <20180205125029.21570-1-kishon-l0cyMroinI0@public.gmane.org>
2018-02-05 12:50   ` [PATCH v2 15/16] mmc: sdhci-omap: Add SPDX identifier Kishon Vijay Abraham I
2018-02-05 12:50     ` Kishon Vijay Abraham I
2018-02-05 12:50     ` Kishon Vijay Abraham I
     [not found]     ` <20180205125029.21570-16-kishon-l0cyMroinI0@public.gmane.org>
2018-02-05 21:50       ` Joe Perches
2018-02-05 21:50         ` Joe Perches
2018-02-05 21:50         ` Joe Perches
2018-02-19  9:33     ` Adrian Hunter
2018-02-19  9:33       ` Adrian Hunter
2018-02-19  9:33       ` Adrian Hunter
2018-02-14 10:38   ` [PATCH v2 00/16] mmc: sdhci-omap: Add UHS/HS200 mode support Ulf Hansson
2018-02-14 10:38     ` Ulf Hansson
2018-02-14 10:38     ` Ulf Hansson
2018-02-05 12:50 ` [PATCH v2 16/16] ARM: OMAP2+: Use sdhci-omap specific pdata-quirks for MMC/SD on DRA74x EVM Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I
2018-02-05 12:50   ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180205125029.21570-7-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.