* [Buildroot] [PATCH v2 1/1] core: rename FOO_BASE_NAME to FOO_BASENAME to avoid clashes
@ 2018-02-06 12:59 Thomas De Schampheleire
2018-02-06 13:51 ` Yann E. MORIN
2018-04-01 12:10 ` Peter Korsgaard
0 siblings, 2 replies; 5+ messages in thread
From: Thomas De Schampheleire @ 2018-02-06 12:59 UTC (permalink / raw)
To: buildroot
In current Buildroot, clashes occur between the variables _NAME and
_BASE_NAME for two packages called foo and foo-base, i.e.
Package foo:
FOO_NAME = foo
FOO_BASE_NAME = foo-1.2.3
Package foo-base:
FOO_BASE_NAME = foo-base
FOO_BASE_BASE_NAME = foo-base-4.5.6
where variable FOO_BASE_NAME is clashing between these two packages.
Specific cases where this clash is already existing are:
- alljoyn-base
- alljoyn-tcl-base
- perl-xml-sax-base
The problem is generic and can occur for a number of variables in Buildroot.
A non-exhaustive list:
<pkg>_BASE and <pkg>_BASE_NAME
<pkg>_BASE_NAME and <pkg>_RAW_BASE_NAME
<pkg>_DIR and <pkg>_DL_DIR
<pkg>_VERSION and <pkg>_DL_VERSION
<pkg>_SOURCE and <pkg>_TARGET_SOURCE
<pkg>_INSTALL_IMAGES and <pkg>_TARGET_INSTALL_IMAGES (same for _STAGING and _TARGET)
<pkg>_LICENSE_FILES and <pkg>_MANIFEST_LICENSE_FILES
<pkg>_DEPENDENCIES and <pkg>_FINAL_DEPENDENCIES
One solution is to use another separator than '_' to separate the
package name from the rest of the variable name. For example, a double
underscore:
FOO__NAME
FOO__BASE_NAME
FOO_BASE__NAME
FOO_BASE__BASE_NAME
However, making that change for only this case means that the variable
naming is no longer consistent. And making the change for all variables has
a large impact, also on certain user scripts.
For now, keep it simple, and rename FOO_BASE_NAME into FOO_BASENAME, so that
the variables become:
FOO_NAME
FOO_BASENAME
FOO_BASE_NAME
FOO_BASE_BASENAME
For consistency, also adapt FOO_RAW_BASE_NAME. Since FOO_RAW_BASENAME would
still pose a conflict with a package called 'foo-raw', take the opportunity
to rename it into FOO_BASENAME_RAW instead, which does not pose a conflict
as we have no variable called FOO_RAW.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
---
package/pkg-download.mk | 10 +++++-----
package/pkg-generic.mk | 14 +++++++-------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/package/pkg-download.mk b/package/pkg-download.mk
index 3712b9ccc6..6f15deba28 100644
--- a/package/pkg-download.mk
+++ b/package/pkg-download.mk
@@ -79,7 +79,7 @@ define DOWNLOAD_GIT
-- \
$($(PKG)_SITE) \
$($(PKG)_DL_VERSION) \
- $($(PKG)_RAW_BASE_NAME) \
+ $($(PKG)_BASENAME_RAW) \
$($(PKG)_DL_OPTS)
endef
@@ -90,7 +90,7 @@ define DOWNLOAD_BZR
-- \
$($(PKG)_SITE) \
$($(PKG)_DL_VERSION) \
- $($(PKG)_RAW_BASE_NAME) \
+ $($(PKG)_BASENAME_RAW) \
$($(PKG)_DL_OPTS)
endef
@@ -102,7 +102,7 @@ define DOWNLOAD_CVS
$(call stripurischeme,$(call qstrip,$($(PKG)_SITE))) \
$($(PKG)_DL_VERSION) \
$($(PKG)_RAWNAME) \
- $($(PKG)_RAW_BASE_NAME) \
+ $($(PKG)_BASENAME_RAW) \
$($(PKG)_DL_OPTS)
endef
@@ -113,7 +113,7 @@ define DOWNLOAD_SVN
-- \
$($(PKG)_SITE) \
$($(PKG)_DL_VERSION) \
- $($(PKG)_RAW_BASE_NAME) \
+ $($(PKG)_BASENAME_RAW) \
$($(PKG)_DL_OPTS)
endef
@@ -137,7 +137,7 @@ define DOWNLOAD_HG
-- \
$($(PKG)_SITE) \
$($(PKG)_DL_VERSION) \
- $($(PKG)_RAW_BASE_NAME) \
+ $($(PKG)_BASENAME_RAW) \
$($(PKG)_DL_OPTS)
endef
diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk
index a2a12e7b56..97c580541d 100644
--- a/package/pkg-generic.mk
+++ b/package/pkg-generic.mk
@@ -452,10 +452,10 @@ ifdef $(3)_OVERRIDE_SRCDIR
$(2)_OVERRIDE_SRCDIR ?= $$($(3)_OVERRIDE_SRCDIR)
endif
-$(2)_BASE_NAME = $$(if $$($(2)_VERSION),$(1)-$$($(2)_VERSION),$(1))
-$(2)_RAW_BASE_NAME = $$(if $$($(2)_VERSION),$$($(2)_RAWNAME)-$$($(2)_VERSION),$$($(2)_RAWNAME))
+$(2)_BASENAME = $$(if $$($(2)_VERSION),$(1)-$$($(2)_VERSION),$(1))
+$(2)_BASENAME_RAW = $$(if $$($(2)_VERSION),$$($(2)_RAWNAME)-$$($(2)_VERSION),$$($(2)_RAWNAME))
$(2)_DL_DIR = $$(DL_DIR)
-$(2)_DIR = $$(BUILD_DIR)/$$($(2)_BASE_NAME)
+$(2)_DIR = $$(BUILD_DIR)/$$($(2)_BASENAME)
ifndef $(2)_SUBDIR
ifdef $(3)_SUBDIR
@@ -484,7 +484,7 @@ ifndef $(2)_SOURCE
ifdef $(3)_SOURCE
$(2)_SOURCE = $$($(3)_SOURCE)
else ifdef $(2)_VERSION
- $(2)_SOURCE ?= $$($(2)_RAW_BASE_NAME).tar.gz
+ $(2)_SOURCE ?= $$($(2)_BASENAME_RAW).tar.gz
endif
endif
@@ -558,7 +558,7 @@ endif
$(2)_REDISTRIBUTE ?= YES
-$(2)_REDIST_SOURCES_DIR = $$(REDIST_SOURCES_DIR_$$(call UPPERCASE,$(4)))/$$($(2)_RAW_BASE_NAME)
+$(2)_REDIST_SOURCES_DIR = $$(REDIST_SOURCES_DIR_$$(call UPPERCASE,$(4)))/$$($(2)_BASENAME_RAW)
# When a target package is a toolchain dependency set this variable to
# 'NO' so the 'toolchain' dependency is not added to prevent a circular
@@ -864,9 +864,9 @@ ifneq ($$(call qstrip,$$($(2)_SOURCE)),)
# is that the license still applies to the files distributed as part
# of the rootfs, even if the sources are not themselves redistributed.
ifeq ($$(call qstrip,$$($(2)_LICENSE_FILES)),)
- $(Q)$$(call legal-warning-pkg,$$($(2)_RAW_BASE_NAME),cannot save license ($(2)_LICENSE_FILES not defined))
+ $(Q)$$(call legal-warning-pkg,$$($(2)_BASENAME_RAW),cannot save license ($(2)_LICENSE_FILES not defined))
else
- $(Q)$$(foreach F,$$($(2)_LICENSE_FILES),$$(call legal-license-file,$$($(2)_RAWNAME),$$($(2)_RAW_BASE_NAME),$$($(2)_PKGDIR),$$(F),$$($(2)_DIR)/$$(F),$$(call UPPERCASE,$(4)))$$(sep))
+ $(Q)$$(foreach F,$$($(2)_LICENSE_FILES),$$(call legal-license-file,$$($(2)_RAWNAME),$$($(2)_BASENAME_RAW),$$($(2)_PKGDIR),$$(F),$$($(2)_DIR)/$$(F),$$(call UPPERCASE,$(4)))$$(sep))
endif # license files
ifeq ($$($(2)_SITE_METHOD),local)
--
2.13.6
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH v2 1/1] core: rename FOO_BASE_NAME to FOO_BASENAME to avoid clashes
2018-02-06 12:59 [Buildroot] [PATCH v2 1/1] core: rename FOO_BASE_NAME to FOO_BASENAME to avoid clashes Thomas De Schampheleire
@ 2018-02-06 13:51 ` Yann E. MORIN
2018-02-06 15:25 ` Sam Voss
2018-04-01 12:10 ` Peter Korsgaard
1 sibling, 1 reply; 5+ messages in thread
From: Yann E. MORIN @ 2018-02-06 13:51 UTC (permalink / raw)
To: buildroot
Thomas, All,
On 2018-02-06 13:59 +0100, Thomas De Schampheleire spake thusly:
> In current Buildroot, clashes occur between the variables _NAME and
> _BASE_NAME for two packages called foo and foo-base, i.e.
>
> Package foo:
> FOO_NAME = foo
> FOO_BASE_NAME = foo-1.2.3
>
> Package foo-base:
> FOO_BASE_NAME = foo-base
> FOO_BASE_BASE_NAME = foo-base-4.5.6
>
> where variable FOO_BASE_NAME is clashing between these two packages.
[--SNIP--]
> Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> package/pkg-download.mk | 10 +++++-----
> package/pkg-generic.mk | 14 +++++++-------
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/package/pkg-download.mk b/package/pkg-download.mk
> index 3712b9ccc6..6f15deba28 100644
> --- a/package/pkg-download.mk
> +++ b/package/pkg-download.mk
> @@ -79,7 +79,7 @@ define DOWNLOAD_GIT
> -- \
> $($(PKG)_SITE) \
> $($(PKG)_DL_VERSION) \
> - $($(PKG)_RAW_BASE_NAME) \
> + $($(PKG)_BASENAME_RAW) \
> $($(PKG)_DL_OPTS)
> endef
>
> @@ -90,7 +90,7 @@ define DOWNLOAD_BZR
> -- \
> $($(PKG)_SITE) \
> $($(PKG)_DL_VERSION) \
> - $($(PKG)_RAW_BASE_NAME) \
> + $($(PKG)_BASENAME_RAW) \
> $($(PKG)_DL_OPTS)
> endef
>
> @@ -102,7 +102,7 @@ define DOWNLOAD_CVS
> $(call stripurischeme,$(call qstrip,$($(PKG)_SITE))) \
> $($(PKG)_DL_VERSION) \
> $($(PKG)_RAWNAME) \
> - $($(PKG)_RAW_BASE_NAME) \
> + $($(PKG)_BASENAME_RAW) \
> $($(PKG)_DL_OPTS)
> endef
>
> @@ -113,7 +113,7 @@ define DOWNLOAD_SVN
> -- \
> $($(PKG)_SITE) \
> $($(PKG)_DL_VERSION) \
> - $($(PKG)_RAW_BASE_NAME) \
> + $($(PKG)_BASENAME_RAW) \
> $($(PKG)_DL_OPTS)
> endef
>
> @@ -137,7 +137,7 @@ define DOWNLOAD_HG
> -- \
> $($(PKG)_SITE) \
> $($(PKG)_DL_VERSION) \
> - $($(PKG)_RAW_BASE_NAME) \
> + $($(PKG)_BASENAME_RAW) \
> $($(PKG)_DL_OPTS)
> endef
>
> diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk
> index a2a12e7b56..97c580541d 100644
> --- a/package/pkg-generic.mk
> +++ b/package/pkg-generic.mk
> @@ -452,10 +452,10 @@ ifdef $(3)_OVERRIDE_SRCDIR
> $(2)_OVERRIDE_SRCDIR ?= $$($(3)_OVERRIDE_SRCDIR)
> endif
>
> -$(2)_BASE_NAME = $$(if $$($(2)_VERSION),$(1)-$$($(2)_VERSION),$(1))
> -$(2)_RAW_BASE_NAME = $$(if $$($(2)_VERSION),$$($(2)_RAWNAME)-$$($(2)_VERSION),$$($(2)_RAWNAME))
> +$(2)_BASENAME = $$(if $$($(2)_VERSION),$(1)-$$($(2)_VERSION),$(1))
> +$(2)_BASENAME_RAW = $$(if $$($(2)_VERSION),$$($(2)_RAWNAME)-$$($(2)_VERSION),$$($(2)_RAWNAME))
> $(2)_DL_DIR = $$(DL_DIR)
> -$(2)_DIR = $$(BUILD_DIR)/$$($(2)_BASE_NAME)
> +$(2)_DIR = $$(BUILD_DIR)/$$($(2)_BASENAME)
>
> ifndef $(2)_SUBDIR
> ifdef $(3)_SUBDIR
> @@ -484,7 +484,7 @@ ifndef $(2)_SOURCE
> ifdef $(3)_SOURCE
> $(2)_SOURCE = $$($(3)_SOURCE)
> else ifdef $(2)_VERSION
> - $(2)_SOURCE ?= $$($(2)_RAW_BASE_NAME).tar.gz
> + $(2)_SOURCE ?= $$($(2)_BASENAME_RAW).tar.gz
> endif
> endif
>
> @@ -558,7 +558,7 @@ endif
>
> $(2)_REDISTRIBUTE ?= YES
>
> -$(2)_REDIST_SOURCES_DIR = $$(REDIST_SOURCES_DIR_$$(call UPPERCASE,$(4)))/$$($(2)_RAW_BASE_NAME)
> +$(2)_REDIST_SOURCES_DIR = $$(REDIST_SOURCES_DIR_$$(call UPPERCASE,$(4)))/$$($(2)_BASENAME_RAW)
>
> # When a target package is a toolchain dependency set this variable to
> # 'NO' so the 'toolchain' dependency is not added to prevent a circular
> @@ -864,9 +864,9 @@ ifneq ($$(call qstrip,$$($(2)_SOURCE)),)
> # is that the license still applies to the files distributed as part
> # of the rootfs, even if the sources are not themselves redistributed.
> ifeq ($$(call qstrip,$$($(2)_LICENSE_FILES)),)
> - $(Q)$$(call legal-warning-pkg,$$($(2)_RAW_BASE_NAME),cannot save license ($(2)_LICENSE_FILES not defined))
> + $(Q)$$(call legal-warning-pkg,$$($(2)_BASENAME_RAW),cannot save license ($(2)_LICENSE_FILES not defined))
> else
> - $(Q)$$(foreach F,$$($(2)_LICENSE_FILES),$$(call legal-license-file,$$($(2)_RAWNAME),$$($(2)_RAW_BASE_NAME),$$($(2)_PKGDIR),$$(F),$$($(2)_DIR)/$$(F),$$(call UPPERCASE,$(4)))$$(sep))
> + $(Q)$$(foreach F,$$($(2)_LICENSE_FILES),$$(call legal-license-file,$$($(2)_RAWNAME),$$($(2)_BASENAME_RAW),$$($(2)_PKGDIR),$$(F),$$($(2)_DIR)/$$(F),$$(call UPPERCASE,$(4)))$$(sep))
> endif # license files
>
> ifeq ($$($(2)_SITE_METHOD),local)
> --
> 2.13.6
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH v2 1/1] core: rename FOO_BASE_NAME to FOO_BASENAME to avoid clashes
2018-02-06 13:51 ` Yann E. MORIN
@ 2018-02-06 15:25 ` Sam Voss
0 siblings, 0 replies; 5+ messages in thread
From: Sam Voss @ 2018-02-06 15:25 UTC (permalink / raw)
To: buildroot
All,
On Tue, Feb 6, 2018 at 2:51 PM, Yann E. MORIN <yann.morin.1998@free.fr> wrote:
> Thomas, All,
>
> On 2018-02-06 13:59 +0100, Thomas De Schampheleire spake thusly:
>> In current Buildroot, clashes occur between the variables _NAME and
>> _BASE_NAME for two packages called foo and foo-base, i.e.
>>
>> Package foo:
>> FOO_NAME = foo
>> FOO_BASE_NAME = foo-1.2.3
>>
>> Package foo-base:
>> FOO_BASE_NAME = foo-base
>> FOO_BASE_BASE_NAME = foo-base-4.5.6
>>
>> where variable FOO_BASE_NAME is clashing between these two packages.
> [--SNIP--]
>> Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
>
> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH v2 1/1] core: rename FOO_BASE_NAME to FOO_BASENAME to avoid clashes
2018-02-06 12:59 [Buildroot] [PATCH v2 1/1] core: rename FOO_BASE_NAME to FOO_BASENAME to avoid clashes Thomas De Schampheleire
2018-02-06 13:51 ` Yann E. MORIN
@ 2018-04-01 12:10 ` Peter Korsgaard
2018-04-08 15:09 ` Peter Korsgaard
1 sibling, 1 reply; 5+ messages in thread
From: Peter Korsgaard @ 2018-04-01 12:10 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas De Schampheleire <thomas.de_schampheleire@nokia.com> writes:
> In current Buildroot, clashes occur between the variables _NAME and
> _BASE_NAME for two packages called foo and foo-base, i.e.
> Package foo:
> FOO_NAME = foo
> FOO_BASE_NAME = foo-1.2.3
> Package foo-base:
> FOO_BASE_NAME = foo-base
> FOO_BASE_BASE_NAME = foo-base-4.5.6
> where variable FOO_BASE_NAME is clashing between these two packages.
> Specific cases where this clash is already existing are:
> - alljoyn-base
> - alljoyn-tcl-base
> - perl-xml-sax-base
> The problem is generic and can occur for a number of variables in Buildroot.
> A non-exhaustive list:
> <pkg>_BASE and <pkg>_BASE_NAME
> <pkg>_BASE_NAME and <pkg>_RAW_BASE_NAME
> <pkg>_DIR and <pkg>_DL_DIR
> <pkg>_VERSION and <pkg>_DL_VERSION
> <pkg>_SOURCE and <pkg>_TARGET_SOURCE
> <pkg>_INSTALL_IMAGES and <pkg>_TARGET_INSTALL_IMAGES (same for _STAGING and _TARGET)
> <pkg>_LICENSE_FILES and <pkg>_MANIFEST_LICENSE_FILES
> <pkg>_DEPENDENCIES and <pkg>_FINAL_DEPENDENCIES
> One solution is to use another separator than '_' to separate the
> package name from the rest of the variable name. For example, a double
> underscore:
> FOO__NAME
> FOO__BASE_NAME
> FOO_BASE__NAME
> FOO_BASE__BASE_NAME
> However, making that change for only this case means that the variable
> naming is no longer consistent. And making the change for all variables has
> a large impact, also on certain user scripts.
> For now, keep it simple, and rename FOO_BASE_NAME into FOO_BASENAME, so that
> the variables become:
> FOO_NAME
> FOO_BASENAME
> FOO_BASE_NAME
> FOO_BASE_BASENAME
> For consistency, also adapt FOO_RAW_BASE_NAME. Since FOO_RAW_BASENAME would
> still pose a conflict with a package called 'foo-raw', take the opportunity
> to rename it into FOO_BASENAME_RAW instead, which does not pose a conflict
> as we have no variable called FOO_RAW.
> Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH v2 1/1] core: rename FOO_BASE_NAME to FOO_BASENAME to avoid clashes
2018-04-01 12:10 ` Peter Korsgaard
@ 2018-04-08 15:09 ` Peter Korsgaard
0 siblings, 0 replies; 5+ messages in thread
From: Peter Korsgaard @ 2018-04-08 15:09 UTC (permalink / raw)
To: buildroot
>>>>> "Peter" == Peter Korsgaard <peter@korsgaard.com> writes:
>> In current Buildroot, clashes occur between the variables _NAME and
>> _BASE_NAME for two packages called foo and foo-base, i.e.
>> Package foo:
>> FOO_NAME = foo
>> FOO_BASE_NAME = foo-1.2.3
>> Package foo-base:
>> FOO_BASE_NAME = foo-base
>> FOO_BASE_BASE_NAME = foo-base-4.5.6
>> where variable FOO_BASE_NAME is clashing between these two packages.
>> Specific cases where this clash is already existing are:
>> - alljoyn-base
>> - alljoyn-tcl-base
>> - perl-xml-sax-base
>> The problem is generic and can occur for a number of variables in Buildroot.
>> A non-exhaustive list:
>> <pkg>_BASE and <pkg>_BASE_NAME
>> <pkg>_BASE_NAME and <pkg>_RAW_BASE_NAME
>> <pkg>_DIR and <pkg>_DL_DIR
>> <pkg>_VERSION and <pkg>_DL_VERSION
>> <pkg>_SOURCE and <pkg>_TARGET_SOURCE
>> <pkg>_INSTALL_IMAGES and <pkg>_TARGET_INSTALL_IMAGES (same for _STAGING and _TARGET)
>> <pkg>_LICENSE_FILES and <pkg>_MANIFEST_LICENSE_FILES
>> <pkg>_DEPENDENCIES and <pkg>_FINAL_DEPENDENCIES
>> One solution is to use another separator than '_' to separate the
>> package name from the rest of the variable name. For example, a double
>> underscore:
>> FOO__NAME
>> FOO__BASE_NAME
>> FOO_BASE__NAME
>> FOO_BASE__BASE_NAME
>> However, making that change for only this case means that the variable
>> naming is no longer consistent. And making the change for all variables has
>> a large impact, also on certain user scripts.
>> For now, keep it simple, and rename FOO_BASE_NAME into FOO_BASENAME, so that
>> the variables become:
>> FOO_NAME
>> FOO_BASENAME
>> FOO_BASE_NAME
>> FOO_BASE_BASENAME
>> For consistency, also adapt FOO_RAW_BASE_NAME. Since FOO_RAW_BASENAME would
>> still pose a conflict with a package called 'foo-raw', take the opportunity
>> to rename it into FOO_BASENAME_RAW instead, which does not pose a conflict
>> as we have no variable called FOO_RAW.
>> Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Committed to 2018.02.x, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-04-08 15:09 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-06 12:59 [Buildroot] [PATCH v2 1/1] core: rename FOO_BASE_NAME to FOO_BASENAME to avoid clashes Thomas De Schampheleire
2018-02-06 13:51 ` Yann E. MORIN
2018-02-06 15:25 ` Sam Voss
2018-04-01 12:10 ` Peter Korsgaard
2018-04-08 15:09 ` Peter Korsgaard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.