From: brgl@bgdev.pl (Bartosz Golaszewski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] dt-bindings: soc: new driver for DaVinci genpd
Date: Wed, 7 Feb 2018 14:45:47 +0100 [thread overview]
Message-ID: <20180207134553.13510-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20180207134553.13510-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add a simple document for the DaVinci genpd driver. We use clock pm
exclusively hence no reg property.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../devicetree/bindings/soc/ti,davinci-pm-domains.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
diff --git a/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt b/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
new file mode 100644
index 000000000000..935d063c7b35
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
@@ -0,0 +1,13 @@
+Device tree bindings for the genpd driver for Texas Instruments DaVinci SoCs
+
+Required properties:
+
+- compatible: must be "ti,davinci-pm-domains"
+- #power-domain-cells: must be 0
+
+Example:
+
+pwc1: power-controller at 227000 {
+ compatible = "ti,davinci-pm-domains";
+ #power-domain-cells = <0>;
+};
--
2.16.1
WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Sekhar Nori <nsekhar@ti.com>,
Kevin Hilman <khilman@kernel.org>,
Russell King <linux@armlinux.org.uk>,
David Lechner <david@lechnology.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH 1/7] dt-bindings: soc: new driver for DaVinci genpd
Date: Wed, 7 Feb 2018 14:45:47 +0100 [thread overview]
Message-ID: <20180207134553.13510-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20180207134553.13510-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add a simple document for the DaVinci genpd driver. We use clock pm
exclusively hence no reg property.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../devicetree/bindings/soc/ti,davinci-pm-domains.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
diff --git a/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt b/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
new file mode 100644
index 000000000000..935d063c7b35
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
@@ -0,0 +1,13 @@
+Device tree bindings for the genpd driver for Texas Instruments DaVinci SoCs
+
+Required properties:
+
+- compatible: must be "ti,davinci-pm-domains"
+- #power-domain-cells: must be 0
+
+Example:
+
+pwc1: power-controller@227000 {
+ compatible = "ti,davinci-pm-domains";
+ #power-domain-cells = <0>;
+};
--
2.16.1
next prev parent reply other threads:[~2018-02-07 13:45 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-07 13:45 [PATCH 0/7] ARM: davinci: add genpd support Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski [this message]
2018-02-07 13:45 ` [PATCH 1/7] dt-bindings: soc: new driver for DaVinci genpd Bartosz Golaszewski
2018-02-07 21:47 ` David Lechner
2018-02-07 21:47 ` David Lechner
2018-02-08 8:56 ` Bartosz Golaszewski
2018-02-08 8:56 ` Bartosz Golaszewski
2018-02-08 8:56 ` Bartosz Golaszewski
2018-02-09 0:40 ` Kevin Hilman
2018-02-09 0:40 ` Kevin Hilman
2018-02-09 0:40 ` Kevin Hilman
2018-02-07 13:45 ` [PATCH 2/7] soc: davinci: new genpd driver Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 21:49 ` David Lechner
2018-02-07 21:49 ` David Lechner
2018-02-07 21:49 ` David Lechner
2018-02-08 9:30 ` Sekhar Nori
2018-02-08 9:30 ` Sekhar Nori
2018-02-08 9:30 ` Sekhar Nori
2018-02-08 9:54 ` Bartosz Golaszewski
2018-02-08 9:54 ` Bartosz Golaszewski
2018-02-08 12:56 ` Sekhar Nori
2018-02-08 12:56 ` Sekhar Nori
2018-02-08 12:56 ` Sekhar Nori
2018-02-08 13:27 ` Bartosz Golaszewski
2018-02-08 13:27 ` Bartosz Golaszewski
2018-02-08 13:27 ` Bartosz Golaszewski
2018-02-08 14:43 ` Sekhar Nori
2018-02-08 14:43 ` Sekhar Nori
2018-02-08 14:43 ` Sekhar Nori
2018-02-07 13:45 ` [PATCH 3/7] ARM: davinci: don't setup pm_clk if we're using genpd Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 13:45 ` [PATCH 4/7] ARM: dts: da850: add power controller nodes Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 21:58 ` David Lechner
2018-02-07 21:58 ` David Lechner
2018-02-07 21:58 ` David Lechner
2018-02-07 13:45 ` [PATCH 5/7] ARM: dts: da850: add power-domains properties to device nodes Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 22:21 ` David Lechner
2018-02-07 22:21 ` David Lechner
2018-02-07 13:45 ` [PATCH 6/7] ARM: davinci: select generic power domains for DaVinci in DT mode Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 13:45 ` [PATCH 7/7] ARM: davinci_all_defconfig: select the DaVinci genpd driver " Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 22:43 ` [PATCH 0/7] ARM: davinci: add genpd support David Lechner
2018-02-07 22:43 ` David Lechner
2018-02-09 12:42 ` Sekhar Nori
2018-02-09 12:42 ` Sekhar Nori
2018-02-09 12:42 ` Sekhar Nori
2018-02-18 3:41 ` David Lechner
2018-02-18 3:41 ` David Lechner
2018-02-18 3:41 ` David Lechner
2018-02-19 10:49 ` Bartosz Golaszewski
2018-02-19 10:49 ` Bartosz Golaszewski
2018-02-19 10:49 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180207134553.13510-2-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.