From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree
Date: Sat, 10 Feb 2018 15:29:41 +0100 [thread overview]
Message-ID: <20180210142940.GA2452@piout.net> (raw)
In-Reply-To: <20180210091911.3644-1-marcus.folkesson@gmail.com>
On 10/02/2018 at 10:19:05 +0100, Marcus Folkesson wrote:
> watchdog_init_timeout() will allways pick timeout_param since it
> defaults to a valid timeout.
>
> Following best practice described in
> Documentation/watchdog/watchdog-kernel-api.txt to make use of
> the parameter logic.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Marcus Folkesson
<marcus.folkesson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>,
Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>,
Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Barry Song <baohua-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Vladimir Zapolskiy <vz-ChpfBGZJDbMAvxtiuMwx3w@public.gmane.org>,
Sylvain Lemieux
<slemieux.tyco-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Nicolas Ferre
<nicolas.ferre-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v2 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree
Date: Sat, 10 Feb 2018 15:29:41 +0100 [thread overview]
Message-ID: <20180210142940.GA2452@piout.net> (raw)
In-Reply-To: <20180210091911.3644-1-marcus.folkesson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On 10/02/2018 at 10:19:05 +0100, Marcus Folkesson wrote:
> watchdog_init_timeout() will allways pick timeout_param since it
> defaults to a valid timeout.
>
> Following best practice described in
> Documentation/watchdog/watchdog-kernel-api.txt to make use of
> the parameter logic.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Reviewed-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Wim Van Sebroeck <wim@iguana.be>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Carlo Caione <carlo@caione.org>,
Kevin Hilman <khilman@baylibre.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Barry Song <baohua@kernel.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
Linus Walleij <linus.walleij@linaro.org>,
Vladimir Zapolskiy <vz@mleia.com>,
Sylvain Lemieux <slemieux.tyco@gmail.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH v2 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree
Date: Sat, 10 Feb 2018 15:29:41 +0100 [thread overview]
Message-ID: <20180210142940.GA2452@piout.net> (raw)
In-Reply-To: <20180210091911.3644-1-marcus.folkesson@gmail.com>
On 10/02/2018 at 10:19:05 +0100, Marcus Folkesson wrote:
> watchdog_init_timeout() will allways pick timeout_param since it
> defaults to a valid timeout.
>
> Following best practice described in
> Documentation/watchdog/watchdog-kernel-api.txt to make use of
> the parameter logic.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
WARNING: multiple messages have this Message-ID (diff)
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree
Date: Sat, 10 Feb 2018 15:29:41 +0100 [thread overview]
Message-ID: <20180210142940.GA2452@piout.net> (raw)
In-Reply-To: <20180210091911.3644-1-marcus.folkesson@gmail.com>
On 10/02/2018 at 10:19:05 +0100, Marcus Folkesson wrote:
> watchdog_init_timeout() will allways pick timeout_param since it
> defaults to a valid timeout.
>
> Following best practice described in
> Documentation/watchdog/watchdog-kernel-api.txt to make use of
> the parameter logic.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
next prev parent reply other threads:[~2018-02-10 14:29 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-10 9:19 [PATCH v2 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 2/7] watchdog: sunxi: allow setting timeout " Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 3/7] watchdog: sirfsoc: " Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 4/7] watchdog: pnx4008: make use of timeout-secs provided " Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 5/7] watchdog: mtk: allow setting timeout " Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 11:10 ` Sean Wang
2018-02-10 11:10 ` Sean Wang
2018-02-10 11:10 ` Sean Wang
2018-02-10 11:10 ` Sean Wang
2018-02-10 12:43 ` Marcus Folkesson
2018-02-10 12:43 ` Marcus Folkesson
2018-02-10 12:43 ` Marcus Folkesson
2018-02-10 12:43 ` Marcus Folkesson
2018-02-10 20:12 ` Marcus Folkesson
2018-02-10 20:12 ` Marcus Folkesson
2018-02-10 20:12 ` Marcus Folkesson
2018-02-10 20:12 ` Marcus Folkesson
2018-02-11 1:52 ` Guenter Roeck
2018-02-11 1:52 ` Guenter Roeck
2018-02-11 1:52 ` Guenter Roeck
2018-02-11 1:52 ` Guenter Roeck
2018-02-11 7:46 ` Sean Wang
2018-02-11 7:46 ` Sean Wang
2018-02-11 7:46 ` Sean Wang
2018-02-11 7:46 ` Sean Wang
2018-02-11 11:17 ` Guenter Roeck
2018-02-11 11:17 ` Guenter Roeck
2018-02-11 11:17 ` Guenter Roeck
2018-02-11 11:17 ` Guenter Roeck
2018-02-10 9:19 ` [PATCH v2 6/7] watchdog: meson: " Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 7/7] watchdog: coh901327: make use of timeout-secs provided " Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-10 9:19 ` Marcus Folkesson
2018-02-11 17:33 ` [v2, " Guenter Roeck
2018-02-11 17:33 ` Guenter Roeck
2018-02-11 17:33 ` Guenter Roeck
2018-02-11 17:33 ` Guenter Roeck
2018-02-22 14:00 ` [PATCH v2 " Linus Walleij
2018-02-22 14:00 ` Linus Walleij
2018-02-22 14:00 ` Linus Walleij
2018-02-22 14:00 ` Linus Walleij
2018-02-10 14:29 ` Alexandre Belloni [this message]
2018-02-10 14:29 ` [PATCH v2 1/7] watchdog: sama5d4: " Alexandre Belloni
2018-02-10 14:29 ` Alexandre Belloni
2018-02-10 14:29 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180210142940.GA2452@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.