* [PATCH v2 1/2] net: phy: dp83867: Add binding for the CLK_OUT pin muxing option
@ 2018-02-14 12:23 Daniel Schultz
[not found] ` <1518611019-37098-1-git-send-email-d.schultz-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Daniel Schultz @ 2018-02-14 12:23 UTC (permalink / raw)
To: robh+dt, mark.rutland, andrew, f.fainelli, netdev, devicetree,
linux-kernel
Cc: w.egorov
From: Wadim Egorov <w.egorov@phytec.de>
The DP83867 has a muxing option for the CLK_OUT pin. It is possible
to set CLK_OUT for different channels.
Create a binding to select a specific clock for CLK_OUT pin.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
Changes:
Added check if clk_output_sel has a valid value
Only write the clock ouput register if a musing is desired
drivers/net/phy/dp83867.c | 19 +++++++++++++++++++
include/dt-bindings/net/ti-dp83867.h | 14 ++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index c1ab976..a862194 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -75,6 +75,8 @@
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
+#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8)
+#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
/* CFG4 bits */
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
@@ -92,6 +94,7 @@ struct dp83867_private {
int io_impedance;
int port_mirroring;
bool rxctrl_strap_quirk;
+ int clk_output_sel;
};
static int dp83867_ack_interrupt(struct phy_device *phydev)
@@ -160,6 +163,14 @@ static int dp83867_of_init(struct phy_device *phydev)
dp83867->io_impedance = -EINVAL;
/* Optional configuration */
+ ret = of_property_read_u32(of_node, "ti,clk-output-sel",
+ &dp83867->clk_output_sel);
+ if (ret || dp83867->clk_output_sel > DP83867_CLK_O_SEL_REF_CLK)
+ /* Keep the default value if ti,clk-output-sel is not set
+ * or too high
+ */
+ dp83867->clk_output_sel = DP83867_CLK_O_SEL_REF_CLK;
+
if (of_property_read_bool(of_node, "ti,max-output-impedance"))
dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
else if (of_property_read_bool(of_node, "ti,min-output-impedance"))
@@ -295,6 +306,14 @@ static int dp83867_config_init(struct phy_device *phydev)
if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
dp83867_config_port_mirroring(phydev);
+ /* Clock output selection if muxing property is set */
+ if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
+ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG);
+ val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
+ val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val);
+ }
+
return 0;
}
diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h
index 172744a..7b16564 100644
--- a/include/dt-bindings/net/ti-dp83867.h
+++ b/include/dt-bindings/net/ti-dp83867.h
@@ -42,4 +42,18 @@
#define DP83867_RGMIIDCTL_3_75_NS 0xe
#define DP83867_RGMIIDCTL_4_00_NS 0xf
+/* IO_MUX_CFG - Clock output selection */
+#define DP83867_CLK_O_SEL_CHN_A_RCLK 0x0
+#define DP83867_CLK_O_SEL_CHN_B_RCLK 0x1
+#define DP83867_CLK_O_SEL_CHN_C_RCLK 0x2
+#define DP83867_CLK_O_SEL_CHN_D_RCLK 0x3
+#define DP83867_CLK_O_SEL_CHN_A_RCLK_DIV5 0x4
+#define DP83867_CLK_O_SEL_CHN_B_RCLK_DIV5 0x5
+#define DP83867_CLK_O_SEL_CHN_C_RCLK_DIV5 0x6
+#define DP83867_CLK_O_SEL_CHN_D_RCLK_DIV5 0x7
+#define DP83867_CLK_O_SEL_CHN_A_TCLK 0x8
+#define DP83867_CLK_O_SEL_CHN_B_TCLK 0x9
+#define DP83867_CLK_O_SEL_CHN_C_TCLK 0xA
+#define DP83867_CLK_O_SEL_CHN_D_TCLK 0xB
+#define DP83867_CLK_O_SEL_REF_CLK 0xC
#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread[parent not found: <1518611019-37098-1-git-send-email-d.schultz-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>]
* [PATCH v2 2/2] net: phy: dp83867: Add documentation for CLK_OUT pin muxing 2018-02-14 12:23 [PATCH v2 1/2] net: phy: dp83867: Add binding for the CLK_OUT pin muxing option Daniel Schultz @ 2018-02-14 12:23 ` Daniel Schultz 0 siblings, 0 replies; 4+ messages in thread From: Daniel Schultz @ 2018-02-14 12:23 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, andrew-g2DYL2Zd6BY, f.fainelli-Re5JQEeQqe8AvxtiuMwx3w, netdev-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA Cc: w.egorov-guT5V/WYfQezQB+pC5nmwQ From: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> Add documentation of ti,clk-output-sel which can be used to select a specific clock for CLK_OUT. Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> Signed-off-by: Daniel Schultz <d.schultz-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> --- Documentation/devicetree/bindings/net/ti,dp83867.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 02c4353..56060c0 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -25,6 +25,8 @@ Optional property: software needs to take when this pin is strapped in these modes. See data manual for details. + - ti,clk-output-sel - Muxing option for CLK_OUT pin - see dt-bindings/net/ti-dp83867.h + for applicable values. Note: ti,min-output-impedance and ti,max-output-impedance are mutually exclusive. When both properties are present ti,max-output-impedance -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] net: phy: dp83867: Add documentation for CLK_OUT pin muxing @ 2018-02-14 12:23 ` Daniel Schultz 0 siblings, 0 replies; 4+ messages in thread From: Daniel Schultz @ 2018-02-14 12:23 UTC (permalink / raw) To: robh+dt, mark.rutland, andrew, f.fainelli, netdev, devicetree, linux-kernel Cc: w.egorov From: Wadim Egorov <w.egorov@phytec.de> Add documentation of ti,clk-output-sel which can be used to select a specific clock for CLK_OUT. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Daniel Schultz <d.schultz@phytec.de> --- Documentation/devicetree/bindings/net/ti,dp83867.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 02c4353..56060c0 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -25,6 +25,8 @@ Optional property: software needs to take when this pin is strapped in these modes. See data manual for details. + - ti,clk-output-sel - Muxing option for CLK_OUT pin - see dt-bindings/net/ti-dp83867.h + for applicable values. Note: ti,min-output-impedance and ti,max-output-impedance are mutually exclusive. When both properties are present ti,max-output-impedance -- 2.7.4 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 2/2] net: phy: dp83867: Add documentation for CLK_OUT pin muxing 2018-02-14 12:23 ` Daniel Schultz (?) @ 2018-02-14 13:07 ` Andrew Lunn -1 siblings, 0 replies; 4+ messages in thread From: Andrew Lunn @ 2018-02-14 13:07 UTC (permalink / raw) To: Daniel Schultz Cc: robh+dt, mark.rutland, f.fainelli, netdev, devicetree, linux-kernel, w.egorov On Wed, Feb 14, 2018 at 01:23:39PM +0100, Daniel Schultz wrote: > From: Wadim Egorov <w.egorov@phytec.de> > > Add documentation of ti,clk-output-sel which can be used to select > a specific clock for CLK_OUT. > > Signed-off-by: Wadim Egorov <w.egorov@phytec.de> > Signed-off-by: Daniel Schultz <d.schultz@phytec.de> > --- > Documentation/devicetree/bindings/net/ti,dp83867.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt > index 02c4353..56060c0 100644 > --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt > +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt > @@ -25,6 +25,8 @@ Optional property: > software needs to take when this pin is > strapped in these modes. See data manual > for details. > + - ti,clk-output-sel - Muxing option for CLK_OUT pin - see dt-bindings/net/ti-dp83867.h > + for applicable values. Hi Daniel Please use the same indentation as the other optional properties. Andrew ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-02-14 13:07 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-14 12:23 [PATCH v2 1/2] net: phy: dp83867: Add binding for the CLK_OUT pin muxing option Daniel Schultz
[not found] ` <1518611019-37098-1-git-send-email-d.schultz-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2018-02-14 12:23 ` [PATCH v2 2/2] net: phy: dp83867: Add documentation for CLK_OUT pin muxing Daniel Schultz
2018-02-14 12:23 ` Daniel Schultz
2018-02-14 13:07 ` Andrew Lunn
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.