* [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: linux-arm-kernel This patchseries fixes the bananapi m1 devicetree, to be able to boot again. The first two patches update/improve the devicetree and the last patch adds all missing regulators. Regards, Philipp Changes since v1: * squashed commit 1 and 3 * fix wrong mmc regulator Philipp Rossak (2): arm: dts: sun6i: a31s: bpi-m2: improve pmic properties arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 63 ++++++++++++++++++++++-- 1 file changed, 60 insertions(+), 3 deletions(-) -- 2.11.0 ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: robh+dt, mark.rutland, linux, maxime.ripard, wens Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi This patchseries fixes the bananapi m1 devicetree, to be able to boot again. The first two patches update/improve the devicetree and the last patch adds all missing regulators. Regards, Philipp Changes since v1: * squashed commit 1 and 3 * fix wrong mmc regulator Philipp Rossak (2): arm: dts: sun6i: a31s: bpi-m2: improve pmic properties arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 63 ++++++++++++++++++++++-- 1 file changed, 60 insertions(+), 3 deletions(-) -- 2.11.0 ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw This patchseries fixes the bananapi m1 devicetree, to be able to boot again. The first two patches update/improve the devicetree and the last patch adds all missing regulators. Regards, Philipp Changes since v1: * squashed commit 1 and 3 * fix wrong mmc regulator Philipp Rossak (2): arm: dts: sun6i: a31s: bpi-m2: improve pmic properties arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 63 ++++++++++++++++++++++-- 1 file changed, 60 insertions(+), 3 deletions(-) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 1/2] arm: dts: sun6i: a31s: bpi-m2: improve pmic properties @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: linux-arm-kernel The eldoin is supplied from the dcdc1 regulator. The N_VBUSEN pin is connected to an external power regulator (SY6280AAC). With this commit we update the pmic binding properties to support those features. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Signed-off-by: Philipp Rossak <embed3d@gmail.com> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 51e6f1d21c32..fb34f32502cf 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -163,6 +163,8 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; }; -- 2.11.0 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 1/2] arm: dts: sun6i: a31s: bpi-m2: improve pmic properties @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: robh+dt, mark.rutland, linux, maxime.ripard, wens Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi The eldoin is supplied from the dcdc1 regulator. The N_VBUSEN pin is connected to an external power regulator (SY6280AAC). With this commit we update the pmic binding properties to support those features. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Signed-off-by: Philipp Rossak <embed3d@gmail.com> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 51e6f1d21c32..fb34f32502cf 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -163,6 +163,8 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; }; -- 2.11.0 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 1/2] arm: dts: sun6i: a31s: bpi-m2: improve pmic properties @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw The eldoin is supplied from the dcdc1 regulator. The N_VBUSEN pin is connected to an external power regulator (SY6280AAC). With this commit we update the pmic binding properties to support those features. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 51e6f1d21c32..fb34f32502cf 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -163,6 +163,8 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; }; -- 2.11.0 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 2/2] arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: linux-arm-kernel This patch fixes a bootproblem with the Bananapi M2 board. Since there are some regulators missing we add them right now. Those values come from the schematic, below you can find a small overview: * reg_aldo1: 3,3V, powers the wifi * reg_aldo2: 2,5V, powers the IO of the RTL8211E * reg_aldo3: 3,3V, powers the audio * reg_dldo1: 3,0V, powers the RTL8211E * reg_dldo2: 2,8V, powers the analog part of the csi * reg_dldo3: 3,3V, powers misc * reg_eldo1: 1,8V, powers the csi * reg_ldo_io1:1,8V, powers the gpio * reg_dc5ldo: needs to be always on This patch updates also the vmmc-supply properties on the mmc0 and mmc2 node to use the allready existent regulators. We can now remove the sunxi-common-regulators.dtsi include since we don't need it anymore. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Signed-off-by: Philipp Rossak <embed3d@gmail.com> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 61 ++++++++++++++++++++++-- 1 file changed, 58 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index fb34f32502cf..b2758dd8ce43 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -42,7 +42,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -99,6 +98,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; phy = <&phy1>; phy-mode = "rgmii"; + phy-supply = <®_dldo1>; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -118,7 +118,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ cd-inverted; @@ -132,7 +132,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; @@ -195,7 +195,28 @@ #include "axp22x.dtsi" +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-gmac"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_dc5ldo { + regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; regulator-name = "vdd-cpus"; @@ -235,6 +256,40 @@ regulator-name = "vcc-dram"; }; +®_dldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-mac"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pb"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-csi"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-cpus"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- 2.11.0 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 2/2] arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: robh+dt, mark.rutland, linux, maxime.ripard, wens Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi This patch fixes a bootproblem with the Bananapi M2 board. Since there are some regulators missing we add them right now. Those values come from the schematic, below you can find a small overview: * reg_aldo1: 3,3V, powers the wifi * reg_aldo2: 2,5V, powers the IO of the RTL8211E * reg_aldo3: 3,3V, powers the audio * reg_dldo1: 3,0V, powers the RTL8211E * reg_dldo2: 2,8V, powers the analog part of the csi * reg_dldo3: 3,3V, powers misc * reg_eldo1: 1,8V, powers the csi * reg_ldo_io1:1,8V, powers the gpio * reg_dc5ldo: needs to be always on This patch updates also the vmmc-supply properties on the mmc0 and mmc2 node to use the allready existent regulators. We can now remove the sunxi-common-regulators.dtsi include since we don't need it anymore. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Signed-off-by: Philipp Rossak <embed3d@gmail.com> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 61 ++++++++++++++++++++++-- 1 file changed, 58 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index fb34f32502cf..b2758dd8ce43 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -42,7 +42,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -99,6 +98,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; phy = <&phy1>; phy-mode = "rgmii"; + phy-supply = <®_dldo1>; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -118,7 +118,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ cd-inverted; @@ -132,7 +132,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; @@ -195,7 +195,28 @@ #include "axp22x.dtsi" +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-gmac"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_dc5ldo { + regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; regulator-name = "vdd-cpus"; @@ -235,6 +256,40 @@ regulator-name = "vcc-dram"; }; +®_dldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-mac"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pb"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-csi"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-cpus"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- 2.11.0 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 2/2] arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators @ 2018-02-14 14:10 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-14 14:10 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw This patch fixes a bootproblem with the Bananapi M2 board. Since there are some regulators missing we add them right now. Those values come from the schematic, below you can find a small overview: * reg_aldo1: 3,3V, powers the wifi * reg_aldo2: 2,5V, powers the IO of the RTL8211E * reg_aldo3: 3,3V, powers the audio * reg_dldo1: 3,0V, powers the RTL8211E * reg_dldo2: 2,8V, powers the analog part of the csi * reg_dldo3: 3,3V, powers misc * reg_eldo1: 1,8V, powers the csi * reg_ldo_io1:1,8V, powers the gpio * reg_dc5ldo: needs to be always on This patch updates also the vmmc-supply properties on the mmc0 and mmc2 node to use the allready existent regulators. We can now remove the sunxi-common-regulators.dtsi include since we don't need it anymore. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 61 ++++++++++++++++++++++-- 1 file changed, 58 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index fb34f32502cf..b2758dd8ce43 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -42,7 +42,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -99,6 +98,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; phy = <&phy1>; phy-mode = "rgmii"; + phy-supply = <®_dldo1>; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -118,7 +118,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ cd-inverted; @@ -132,7 +132,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; @@ -195,7 +195,28 @@ #include "axp22x.dtsi" +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-gmac"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_dc5ldo { + regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; regulator-name = "vdd-cpus"; @@ -235,6 +256,40 @@ regulator-name = "vcc-dram"; }; +®_dldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-mac"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pb"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-csi"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-cpus"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- 2.11.0 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-15 9:08 ` Maxime Ripard 0 siblings, 0 replies; 15+ messages in thread From: Maxime Ripard @ 2018-02-15 9:08 UTC (permalink / raw) To: linux-arm-kernel On Wed, Feb 14, 2018 at 03:10:23PM +0100, Philipp Rossak wrote: > This patchseries fixes the bananapi m1 devicetree, to be able to boot again. > The first two patches update/improve the devicetree and the last patch adds > all missing regulators. > > Regards, > Philipp > > Changes since v1: > * squashed commit 1 and 3 > * fix wrong mmc regulator > > Philipp Rossak (2): > arm: dts: sun6i: a31s: bpi-m2: improve pmic properties > arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators Applied both. I had to make a couple of changes though, in the commit title arm should be uppercase, and the fix isn't needed. I also added stable in Cc, since these patches have been there for quite some time. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180215/6bebb158/attachment.sig> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-15 9:08 ` Maxime Ripard 0 siblings, 0 replies; 15+ messages in thread From: Maxime Ripard @ 2018-02-15 9:08 UTC (permalink / raw) To: Philipp Rossak Cc: robh+dt, mark.rutland, linux, wens, devicetree, linux-arm-kernel, linux-kernel, linux-sunxi [-- Attachment #1: Type: text/plain, Size: 862 bytes --] On Wed, Feb 14, 2018 at 03:10:23PM +0100, Philipp Rossak wrote: > This patchseries fixes the bananapi m1 devicetree, to be able to boot again. > The first two patches update/improve the devicetree and the last patch adds > all missing regulators. > > Regards, > Philipp > > Changes since v1: > * squashed commit 1 and 3 > * fix wrong mmc regulator > > Philipp Rossak (2): > arm: dts: sun6i: a31s: bpi-m2: improve pmic properties > arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators Applied both. I had to make a couple of changes though, in the commit title arm should be uppercase, and the fix isn't needed. I also added stable in Cc, since these patches have been there for quite some time. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-15 9:08 ` Maxime Ripard 0 siblings, 0 replies; 15+ messages in thread From: Maxime Ripard @ 2018-02-15 9:08 UTC (permalink / raw) To: Philipp Rossak Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, wens-jdAy2FN1RRM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw [-- Attachment #1: Type: text/plain, Size: 862 bytes --] On Wed, Feb 14, 2018 at 03:10:23PM +0100, Philipp Rossak wrote: > This patchseries fixes the bananapi m1 devicetree, to be able to boot again. > The first two patches update/improve the devicetree and the last patch adds > all missing regulators. > > Regards, > Philipp > > Changes since v1: > * squashed commit 1 and 3 > * fix wrong mmc regulator > > Philipp Rossak (2): > arm: dts: sun6i: a31s: bpi-m2: improve pmic properties > arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators Applied both. I had to make a couple of changes though, in the commit title arm should be uppercase, and the fix isn't needed. I also added stable in Cc, since these patches have been there for quite some time. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-15 11:19 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-15 11:19 UTC (permalink / raw) To: linux-arm-kernel On 15.02.2018 10:08, Maxime Ripard wrote: > On Wed, Feb 14, 2018 at 03:10:23PM +0100, Philipp Rossak wrote: >> This patchseries fixes the bananapi m1 devicetree, to be able to boot again. >> The first two patches update/improve the devicetree and the last patch adds >> all missing regulators. >> >> Regards, >> Philipp >> >> Changes since v1: >> * squashed commit 1 and 3 >> * fix wrong mmc regulator >> >> Philipp Rossak (2): >> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >> arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators > > Applied both. > > I had to make a couple of changes though, in the commit title arm > should be uppercase, and the fix isn't needed. > > I also added stable in Cc, since these patches have been there for > quite some time. > > Maxime > Thanks! Philipp ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-15 11:19 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-15 11:19 UTC (permalink / raw) To: Maxime Ripard Cc: robh+dt, mark.rutland, linux, wens, devicetree, linux-arm-kernel, linux-kernel, linux-sunxi On 15.02.2018 10:08, Maxime Ripard wrote: > On Wed, Feb 14, 2018 at 03:10:23PM +0100, Philipp Rossak wrote: >> This patchseries fixes the bananapi m1 devicetree, to be able to boot again. >> The first two patches update/improve the devicetree and the last patch adds >> all missing regulators. >> >> Regards, >> Philipp >> >> Changes since v1: >> * squashed commit 1 and 3 >> * fix wrong mmc regulator >> >> Philipp Rossak (2): >> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >> arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators > > Applied both. > > I had to make a couple of changes though, in the commit title arm > should be uppercase, and the fix isn't needed. > > I also added stable in Cc, since these patches have been there for > quite some time. > > Maxime > Thanks! Philipp ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators @ 2018-02-15 11:19 ` Philipp Rossak 0 siblings, 0 replies; 15+ messages in thread From: Philipp Rossak @ 2018-02-15 11:19 UTC (permalink / raw) To: Maxime Ripard Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, wens-jdAy2FN1RRM, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw On 15.02.2018 10:08, Maxime Ripard wrote: > On Wed, Feb 14, 2018 at 03:10:23PM +0100, Philipp Rossak wrote: >> This patchseries fixes the bananapi m1 devicetree, to be able to boot again. >> The first two patches update/improve the devicetree and the last patch adds >> all missing regulators. >> >> Regards, >> Philipp >> >> Changes since v1: >> * squashed commit 1 and 3 >> * fix wrong mmc regulator >> >> Philipp Rossak (2): >> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >> arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators > > Applied both. > > I had to make a couple of changes though, in the commit title arm > should be uppercase, and the fix isn't needed. > > I also added stable in Cc, since these patches have been there for > quite some time. > > Maxime > Thanks! Philipp ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2018-02-15 11:19 UTC | newest] Thread overview: 15+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-02-14 14:10 [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators Philipp Rossak 2018-02-14 14:10 ` Philipp Rossak 2018-02-14 14:10 ` Philipp Rossak 2018-02-14 14:10 ` [PATCH v2 1/2] arm: dts: sun6i: a31s: bpi-m2: improve pmic properties Philipp Rossak 2018-02-14 14:10 ` Philipp Rossak 2018-02-14 14:10 ` Philipp Rossak 2018-02-14 14:10 ` [PATCH v2 2/2] arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators Philipp Rossak 2018-02-14 14:10 ` Philipp Rossak 2018-02-14 14:10 ` Philipp Rossak 2018-02-15 9:08 ` [PATCH v2 0/2] Fix broken bananapi m2 devicetree/regulators Maxime Ripard 2018-02-15 9:08 ` Maxime Ripard 2018-02-15 9:08 ` Maxime Ripard 2018-02-15 11:19 ` Philipp Rossak 2018-02-15 11:19 ` Philipp Rossak 2018-02-15 11:19 ` Philipp Rossak
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.