From: Stefan Agner <stefan@agner.ch>
To: shawnguo@kernel.org, kernel@pengutronix.de
Cc: fabio.estevam@nxp.com, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
Stefan Agner <stefan@agner.ch>
Subject: [PATCH 1/2] clk: imx: imx7d: add the Keypad Port module clock
Date: Tue, 27 Feb 2018 17:05:43 +0100 [thread overview]
Message-ID: <20180227160544.11446-1-stefan@agner.ch> (raw)
According to the i.MX7D Reference Manual, the Keypad Port module
(KPP) requires this clock gate to be enabled.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/clk/imx/clk-imx7d.c | 1 +
include/dt-bindings/clock/imx7d-clock.h | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index f34f1ecc4690..6b6e8851eabb 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -858,6 +858,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_WDOG2_ROOT_CLK] = imx_clk_gate4("wdog2_root_clk", "wdog_post_div", base + 0x49d0, 0);
clks[IMX7D_WDOG3_ROOT_CLK] = imx_clk_gate4("wdog3_root_clk", "wdog_post_div", base + 0x49e0, 0);
clks[IMX7D_WDOG4_ROOT_CLK] = imx_clk_gate4("wdog4_root_clk", "wdog_post_div", base + 0x49f0, 0);
+ clks[IMX7D_KPP_ROOT_CLK] = imx_clk_gate4("kpp_root_clk", "ipg_root_clk", base + 0x4aa0, 0);
clks[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_gate4("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
clks[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_gate4("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
clks[IMX7D_WRCLK_ROOT_CLK] = imx_clk_gate4("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index dc51904435d8..7653c8536b64 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -453,5 +453,6 @@
#define IMX7D_NAND_RAWNAND_CLK 440
#define IMX7D_NAND_USDHC_BUS_RAWNAND_CLK 441
#define IMX7D_SNVS_CLK 442
-#define IMX7D_CLK_END 443
+#define IMX7D_KPP_ROOT_CLK 443
+#define IMX7D_CLK_END 444
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--
2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: stefan@agner.ch (Stefan Agner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] clk: imx: imx7d: add the Keypad Port module clock
Date: Tue, 27 Feb 2018 17:05:43 +0100 [thread overview]
Message-ID: <20180227160544.11446-1-stefan@agner.ch> (raw)
According to the i.MX7D Reference Manual, the Keypad Port module
(KPP) requires this clock gate to be enabled.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/clk/imx/clk-imx7d.c | 1 +
include/dt-bindings/clock/imx7d-clock.h | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index f34f1ecc4690..6b6e8851eabb 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -858,6 +858,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_WDOG2_ROOT_CLK] = imx_clk_gate4("wdog2_root_clk", "wdog_post_div", base + 0x49d0, 0);
clks[IMX7D_WDOG3_ROOT_CLK] = imx_clk_gate4("wdog3_root_clk", "wdog_post_div", base + 0x49e0, 0);
clks[IMX7D_WDOG4_ROOT_CLK] = imx_clk_gate4("wdog4_root_clk", "wdog_post_div", base + 0x49f0, 0);
+ clks[IMX7D_KPP_ROOT_CLK] = imx_clk_gate4("kpp_root_clk", "ipg_root_clk", base + 0x4aa0, 0);
clks[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_gate4("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
clks[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_gate4("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
clks[IMX7D_WRCLK_ROOT_CLK] = imx_clk_gate4("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index dc51904435d8..7653c8536b64 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -453,5 +453,6 @@
#define IMX7D_NAND_RAWNAND_CLK 440
#define IMX7D_NAND_USDHC_BUS_RAWNAND_CLK 441
#define IMX7D_SNVS_CLK 442
-#define IMX7D_CLK_END 443
+#define IMX7D_KPP_ROOT_CLK 443
+#define IMX7D_CLK_END 444
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--
2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Agner <stefan@agner.ch>
To: shawnguo@kernel.org, kernel@pengutronix.de
Cc: fabio.estevam@nxp.com, devicetree@vger.kernel.org,
Stefan Agner <stefan@agner.ch>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] clk: imx: imx7d: add the Keypad Port module clock
Date: Tue, 27 Feb 2018 17:05:43 +0100 [thread overview]
Message-ID: <20180227160544.11446-1-stefan@agner.ch> (raw)
According to the i.MX7D Reference Manual, the Keypad Port module
(KPP) requires this clock gate to be enabled.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/clk/imx/clk-imx7d.c | 1 +
include/dt-bindings/clock/imx7d-clock.h | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index f34f1ecc4690..6b6e8851eabb 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -858,6 +858,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_WDOG2_ROOT_CLK] = imx_clk_gate4("wdog2_root_clk", "wdog_post_div", base + 0x49d0, 0);
clks[IMX7D_WDOG3_ROOT_CLK] = imx_clk_gate4("wdog3_root_clk", "wdog_post_div", base + 0x49e0, 0);
clks[IMX7D_WDOG4_ROOT_CLK] = imx_clk_gate4("wdog4_root_clk", "wdog_post_div", base + 0x49f0, 0);
+ clks[IMX7D_KPP_ROOT_CLK] = imx_clk_gate4("kpp_root_clk", "ipg_root_clk", base + 0x4aa0, 0);
clks[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_gate4("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
clks[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_gate4("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
clks[IMX7D_WRCLK_ROOT_CLK] = imx_clk_gate4("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index dc51904435d8..7653c8536b64 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -453,5 +453,6 @@
#define IMX7D_NAND_RAWNAND_CLK 440
#define IMX7D_NAND_USDHC_BUS_RAWNAND_CLK 441
#define IMX7D_SNVS_CLK 442
-#define IMX7D_CLK_END 443
+#define IMX7D_KPP_ROOT_CLK 443
+#define IMX7D_CLK_END 444
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--
2.16.2
next reply other threads:[~2018-02-27 16:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 16:05 Stefan Agner [this message]
2018-02-27 16:05 ` [PATCH 1/2] clk: imx: imx7d: add the Keypad Port module clock Stefan Agner
2018-02-27 16:05 ` Stefan Agner
2018-02-27 16:05 ` [PATCH 2/2] ARM: dts: imx7s: add Keypad Port module Stefan Agner
2018-02-27 16:05 ` Stefan Agner
2018-02-27 16:05 ` Stefan Agner
2018-02-28 6:55 ` [PATCH 1/2] clk: imx: imx7d: add the Keypad Port module clock Shawn Guo
2018-02-28 6:55 ` Shawn Guo
2018-02-28 6:55 ` Shawn Guo
2018-03-05 22:22 ` Rob Herring
2018-03-05 22:22 ` Rob Herring
2018-03-05 22:22 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180227160544.11446-1-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.