From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 17/37] vdi: Switch to .bdrv_co_block_status()
Date: Fri, 2 Mar 2018 19:54:28 +0100 [thread overview]
Message-ID: <20180302185448.6314-18-kwolf@redhat.com> (raw)
In-Reply-To: <20180302185448.6314-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the vdi driver accordingly. Note that the
TODO is already covered (the block layer guarantees bounds of its
requests), and that we can remove the now-unused s->block_sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/vdi.c | 33 +++++++++++++--------------------
1 file changed, 13 insertions(+), 20 deletions(-)
diff --git a/block/vdi.c b/block/vdi.c
index 32b1763cde..0780c82d82 100644
--- a/block/vdi.c
+++ b/block/vdi.c
@@ -172,8 +172,6 @@ typedef struct {
uint32_t *bmap;
/* Size of block (bytes). */
uint32_t block_size;
- /* Size of block (sectors). */
- uint32_t block_sectors;
/* First sector of block map. */
uint32_t bmap_sector;
/* VDI header (converted to host endianness). */
@@ -463,7 +461,6 @@ static int vdi_open(BlockDriverState *bs, QDict *options, int flags,
bs->total_sectors = header.disk_size / SECTOR_SIZE;
s->block_size = header.block_size;
- s->block_sectors = header.block_size / SECTOR_SIZE;
s->bmap_sector = header.offset_bmap / SECTOR_SIZE;
s->header = header;
@@ -509,33 +506,29 @@ static int vdi_reopen_prepare(BDRVReopenState *state,
return 0;
}
-static int64_t coroutine_fn vdi_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn vdi_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t bytes,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
{
- /* TODO: Check for too large sector_num (in bdrv_is_allocated or here). */
BDRVVdiState *s = (BDRVVdiState *)bs->opaque;
- size_t bmap_index = sector_num / s->block_sectors;
- size_t sector_in_block = sector_num % s->block_sectors;
- int n_sectors = s->block_sectors - sector_in_block;
+ size_t bmap_index = offset / s->block_size;
+ size_t index_in_block = offset % s->block_size;
uint32_t bmap_entry = le32_to_cpu(s->bmap[bmap_index]);
- uint64_t offset;
int result;
- logout("%p, %" PRId64 ", %d, %p\n", bs, sector_num, nb_sectors, pnum);
- if (n_sectors > nb_sectors) {
- n_sectors = nb_sectors;
- }
- *pnum = n_sectors;
+ logout("%p, %" PRId64 ", %" PRId64 ", %p\n", bs, offset, bytes, pnum);
+ *pnum = MIN(s->block_size - index_in_block, bytes);
result = VDI_IS_ALLOCATED(bmap_entry);
if (!result) {
return 0;
}
- offset = s->header.offset_data +
- (uint64_t)bmap_entry * s->block_size +
- sector_in_block * SECTOR_SIZE;
+ *map = s->header.offset_data + (uint64_t)bmap_entry * s->block_size +
+ index_in_block;
*file = bs->file->bs;
- return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
+ return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
}
static int coroutine_fn
@@ -903,7 +896,7 @@ static BlockDriver bdrv_vdi = {
.bdrv_child_perm = bdrv_format_default_perms,
.bdrv_create = vdi_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_co_get_block_status = vdi_co_get_block_status,
+ .bdrv_co_block_status = vdi_co_block_status,
.bdrv_make_empty = vdi_make_empty,
.bdrv_co_preadv = vdi_co_preadv,
--
2.13.6
next prev parent reply other threads:[~2018-03-02 18:55 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-02 18:54 [Qemu-devel] [PULL 00/37] Block layer patches Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 01/37] block: Add .bdrv_co_block_status() callback Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 02/37] nvme: Drop pointless .bdrv_co_get_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 03/37] block: Switch passthrough drivers to .bdrv_co_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 04/37] file-posix: Switch " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 05/37] gluster: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 06/37] iscsi: Switch cluster_sectors to byte-based Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 07/37] iscsi: Switch iscsi_allocmap_update() " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 08/37] iscsi: Switch to .bdrv_co_block_status() Kevin Wolf
2018-05-08 15:37 ` Peter Maydell
2018-05-08 16:38 ` Eric Blake
2018-03-02 18:54 ` [Qemu-devel] [PULL 09/37] null: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 10/37] parallels: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 11/37] qcow: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 12/37] qcow2: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 13/37] qed: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 14/37] raw: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 15/37] sheepdog: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 16/37] vdi: Avoid bitrot of debugging code Kevin Wolf
2018-03-02 18:54 ` Kevin Wolf [this message]
2018-03-02 18:54 ` [Qemu-devel] [PULL 18/37] vmdk: Switch to .bdrv_co_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 19/37] vpc: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 20/37] vvfat: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 21/37] block: Drop unused .bdrv_co_get_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 22/37] block: fix write with zero flag set and iovector provided Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 23/37] iotest 033: add misaligned write-zeroes test via truncate Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 24/37] specs/qcow2: Fix documentation of the compressed cluster descriptor Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 25/37] docs: document how to use the l2-cache-entry-size parameter Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 26/37] aio: rename aio_context_in_iothread() to in_aio_context_home_thread() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 27/37] block: extract AIO_WAIT_WHILE() from BlockDriverState Kevin Wolf
2018-03-05 19:53 ` Eric Blake
2018-03-02 18:54 ` [Qemu-devel] [PULL 28/37] block: add BlockBackend->in_flight counter Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 29/37] block: test blk_aio_flush() with blk->root == NULL Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 30/37] Revert "IDE: Do not flush empty CDROM drives" Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 31/37] block: rename .bdrv_create() to .bdrv_co_create_opts() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 32/37] qcow2: make qcow2_co_create2() a coroutine_fn Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 33/37] qemu-img: Make resize error message more general Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 34/37] block/ssh: Pull ssh_grow_file() from ssh_create() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 35/37] block/ssh: Make ssh_grow_file() blocking Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 36/37] block/ssh: Add basic .bdrv_truncate() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 37/37] qcow2: Replace align_offset() with ROUND_UP() Kevin Wolf
2018-03-05 13:27 ` [Qemu-devel] [PULL 00/37] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180302185448.6314-18-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.