From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 06/37] iscsi: Switch cluster_sectors to byte-based
Date: Fri, 2 Mar 2018 19:54:17 +0100 [thread overview]
Message-ID: <20180302185448.6314-7-kwolf@redhat.com> (raw)
In-Reply-To: <20180302185448.6314-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert all uses of
the cluster size in sectors, along with adding assertions that we
are not dividing by zero.
Improve some comment grammar while in the area.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/iscsi.c | 56 +++++++++++++++++++++++++++++++++++---------------------
1 file changed, 35 insertions(+), 21 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 421983dd6f..3414c21c7f 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -86,7 +86,7 @@ typedef struct IscsiLun {
unsigned long *allocmap;
unsigned long *allocmap_valid;
long allocmap_size;
- int cluster_sectors;
+ int cluster_size;
bool use_16_for_rw;
bool write_protected;
bool lbpme;
@@ -430,9 +430,10 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
{
iscsi_allocmap_free(iscsilun);
+ assert(iscsilun->cluster_size);
iscsilun->allocmap_size =
- DIV_ROUND_UP(sector_lun2qemu(iscsilun->num_blocks, iscsilun),
- iscsilun->cluster_sectors);
+ DIV_ROUND_UP(iscsilun->num_blocks * iscsilun->block_size,
+ iscsilun->cluster_size);
iscsilun->allocmap = bitmap_try_new(iscsilun->allocmap_size);
if (!iscsilun->allocmap) {
@@ -440,7 +441,7 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
}
if (open_flags & BDRV_O_NOCACHE) {
- /* in case that cache.direct = on all allocmap entries are
+ /* when cache.direct = on all allocmap entries are
* treated as invalid to force a relookup of the block
* status on every read request */
return 0;
@@ -461,17 +462,19 @@ iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
int nb_sectors, bool allocated, bool valid)
{
int64_t cl_num_expanded, nb_cls_expanded, cl_num_shrunk, nb_cls_shrunk;
+ int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
if (iscsilun->allocmap == NULL) {
return;
}
/* expand to entirely contain all affected clusters */
- cl_num_expanded = sector_num / iscsilun->cluster_sectors;
+ assert(cluster_sectors);
+ cl_num_expanded = sector_num / cluster_sectors;
nb_cls_expanded = DIV_ROUND_UP(sector_num + nb_sectors,
- iscsilun->cluster_sectors) - cl_num_expanded;
+ cluster_sectors) - cl_num_expanded;
/* shrink to touch only completely contained clusters */
- cl_num_shrunk = DIV_ROUND_UP(sector_num, iscsilun->cluster_sectors);
- nb_cls_shrunk = (sector_num + nb_sectors) / iscsilun->cluster_sectors
+ cl_num_shrunk = DIV_ROUND_UP(sector_num, cluster_sectors);
+ nb_cls_shrunk = (sector_num + nb_sectors) / cluster_sectors
- cl_num_shrunk;
if (allocated) {
bitmap_set(iscsilun->allocmap, cl_num_expanded, nb_cls_expanded);
@@ -535,9 +538,12 @@ iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t sector_num,
if (iscsilun->allocmap == NULL) {
return true;
}
- size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+ assert(iscsilun->cluster_size);
+ size = DIV_ROUND_UP(sector_num + nb_sectors,
+ iscsilun->cluster_size >> BDRV_SECTOR_BITS);
return !(find_next_bit(iscsilun->allocmap, size,
- sector_num / iscsilun->cluster_sectors) == size);
+ sector_num * BDRV_SECTOR_SIZE /
+ iscsilun->cluster_size) == size);
}
static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
@@ -547,9 +553,12 @@ static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
if (iscsilun->allocmap_valid == NULL) {
return false;
}
- size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+ assert(iscsilun->cluster_size);
+ size = DIV_ROUND_UP(sector_num + nb_sectors,
+ iscsilun->cluster_size >> BDRV_SECTOR_BITS);
return (find_next_zero_bit(iscsilun->allocmap_valid, size,
- sector_num / iscsilun->cluster_sectors) == size);
+ sector_num * BDRV_SECTOR_SIZE /
+ iscsilun->cluster_size) == size);
}
static int coroutine_fn
@@ -793,16 +802,21 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
BlockDriverState *file;
/* check the block status from the beginning of the cluster
* containing the start sector */
- int64_t ret = iscsi_co_get_block_status(bs,
- sector_num - sector_num % iscsilun->cluster_sectors,
- BDRV_REQUEST_MAX_SECTORS, &pnum, &file);
+ int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
+ int head;
+ int64_t ret;
+
+ assert(cluster_sectors);
+ head = sector_num % cluster_sectors;
+ ret = iscsi_co_get_block_status(bs, sector_num - head,
+ BDRV_REQUEST_MAX_SECTORS, &pnum,
+ &file);
if (ret < 0) {
return ret;
}
/* if the whole request falls into an unallocated area we can avoid
- * to read and directly return zeroes instead */
- if (ret & BDRV_BLOCK_ZERO &&
- pnum >= nb_sectors + sector_num % iscsilun->cluster_sectors) {
+ * reading and directly return zeroes instead */
+ if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
@@ -1953,8 +1967,8 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
* reasonable size */
if (iscsilun->bl.opt_unmap_gran * iscsilun->block_size >= 4 * 1024 &&
iscsilun->bl.opt_unmap_gran * iscsilun->block_size <= 16 * 1024 * 1024) {
- iscsilun->cluster_sectors = (iscsilun->bl.opt_unmap_gran *
- iscsilun->block_size) >> BDRV_SECTOR_BITS;
+ iscsilun->cluster_size = iscsilun->bl.opt_unmap_gran *
+ iscsilun->block_size;
if (iscsilun->lbprz) {
ret = iscsi_allocmap_init(iscsilun, bs->open_flags);
}
@@ -2163,7 +2177,7 @@ static int iscsi_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
{
IscsiLun *iscsilun = bs->opaque;
bdi->unallocated_blocks_are_zero = iscsilun->lbprz;
- bdi->cluster_size = iscsilun->cluster_sectors * BDRV_SECTOR_SIZE;
+ bdi->cluster_size = iscsilun->cluster_size;
return 0;
}
--
2.13.6
next prev parent reply other threads:[~2018-03-02 18:55 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-02 18:54 [Qemu-devel] [PULL 00/37] Block layer patches Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 01/37] block: Add .bdrv_co_block_status() callback Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 02/37] nvme: Drop pointless .bdrv_co_get_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 03/37] block: Switch passthrough drivers to .bdrv_co_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 04/37] file-posix: Switch " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 05/37] gluster: " Kevin Wolf
2018-03-02 18:54 ` Kevin Wolf [this message]
2018-03-02 18:54 ` [Qemu-devel] [PULL 07/37] iscsi: Switch iscsi_allocmap_update() to byte-based Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 08/37] iscsi: Switch to .bdrv_co_block_status() Kevin Wolf
2018-05-08 15:37 ` Peter Maydell
2018-05-08 16:38 ` Eric Blake
2018-03-02 18:54 ` [Qemu-devel] [PULL 09/37] null: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 10/37] parallels: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 11/37] qcow: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 12/37] qcow2: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 13/37] qed: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 14/37] raw: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 15/37] sheepdog: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 16/37] vdi: Avoid bitrot of debugging code Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 17/37] vdi: Switch to .bdrv_co_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 18/37] vmdk: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 19/37] vpc: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 20/37] vvfat: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 21/37] block: Drop unused .bdrv_co_get_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 22/37] block: fix write with zero flag set and iovector provided Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 23/37] iotest 033: add misaligned write-zeroes test via truncate Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 24/37] specs/qcow2: Fix documentation of the compressed cluster descriptor Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 25/37] docs: document how to use the l2-cache-entry-size parameter Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 26/37] aio: rename aio_context_in_iothread() to in_aio_context_home_thread() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 27/37] block: extract AIO_WAIT_WHILE() from BlockDriverState Kevin Wolf
2018-03-05 19:53 ` Eric Blake
2018-03-02 18:54 ` [Qemu-devel] [PULL 28/37] block: add BlockBackend->in_flight counter Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 29/37] block: test blk_aio_flush() with blk->root == NULL Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 30/37] Revert "IDE: Do not flush empty CDROM drives" Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 31/37] block: rename .bdrv_create() to .bdrv_co_create_opts() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 32/37] qcow2: make qcow2_co_create2() a coroutine_fn Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 33/37] qemu-img: Make resize error message more general Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 34/37] block/ssh: Pull ssh_grow_file() from ssh_create() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 35/37] block/ssh: Make ssh_grow_file() blocking Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 36/37] block/ssh: Add basic .bdrv_truncate() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 37/37] qcow2: Replace align_offset() with ROUND_UP() Kevin Wolf
2018-03-05 13:27 ` [Qemu-devel] [PULL 00/37] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180302185448.6314-7-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.