All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pavel Machek <pavel@ucw.cz>
To: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Cc: joel@jms.id.au, andrew@aj.id.au, arnd@arndb.de,
	gregkh@linuxfoundation.org, jdelvare@suse.com,
	linux@roeck-us.net, benh@kernel.crashing.org, andrew@lunn.ch,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-hwmon@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, openbmc@lists.ozlabs.org
Subject: Re: [PATCH v2 2/8] [PATCH 2/8] Documentations: dt-bindings: Add a document of PECI adapter driver for Aspeed AST24xx/25xx SoCs
Date: Tue, 6 Mar 2018 13:40:02 +0100	[thread overview]
Message-ID: <20180306124002.GA13950@amd> (raw)
In-Reply-To: <20180221161606.32247-3-jae.hyun.yoo@linux.intel.com>

[-- Attachment #1: Type: text/plain, Size: 2389 bytes --]

Hi!

> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> ---
>  .../devicetree/bindings/peci/peci-aspeed.txt       | 73 ++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt
> 
> diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
> new file mode 100644
> index 000000000000..8a86f346d550
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
> @@ -0,0 +1,73 @@
> +Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs.

Are these SoCs x86-based?

> +Required properties:
> +- compatible
> +	"aspeed,ast2400-peci" or "aspeed,ast2500-peci"
> +	- aspeed,ast2400-peci: Aspeed AST2400 family PECI controller
> +	- aspeed,ast2500-peci: Aspeed AST2500 family PECI controller
> +
> +- reg
> +	Should contain PECI registers location and length.

Other dts documents put it on one line, reg: Should contain ...

> +- clock_frequency
> +	Should contain the operation frequency of PECI hardware module.
> +	187500 ~ 24000000

specify this is Hz?

> +- rd-sampling-point
> +	Read sampling point selection. The whole period of a bit time will be
> +	divided into 16 time frames. This value will determine which time frame
> +	this controller will sample PECI signal for data read back. Usually in
> +	the middle of a bit time is the best.

English? "This value will determine when this controller"?

> +	0 ~ 15 (default: 8)
> +
> +- cmd_timeout_ms
> +	Command timeout in units of ms.
> +	1 ~ 60000 (default: 1000)
> +
> +Example:
> +	peci: peci@1e78b000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x1e78b000 0x60>;
> +
> +		peci0: peci-bus@0 {
> +			compatible = "aspeed,ast2500-peci";
> +			reg = <0x0 0x60>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			interrupts = <15>;
> +			clocks = <&clk_clkin>;
> +			clock-frequency = <24000000>;
> +			msg-timing-nego = <1>;
> +			addr-timing-nego = <1>;
> +			rd-sampling-point = <8>;
> +			cmd-timeout-ms = <1000>;
> +		};
> +	};
> \ No newline at end of file

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/8] [PATCH 2/8] Documentations: dt-bindings: Add a document of PECI adapter driver for Aspeed AST24xx/25xx SoCs
Date: Tue, 6 Mar 2018 13:40:02 +0100	[thread overview]
Message-ID: <20180306124002.GA13950@amd> (raw)
In-Reply-To: <20180221161606.32247-3-jae.hyun.yoo@linux.intel.com>

Hi!

> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> ---
>  .../devicetree/bindings/peci/peci-aspeed.txt       | 73 ++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt
> 
> diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
> new file mode 100644
> index 000000000000..8a86f346d550
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
> @@ -0,0 +1,73 @@
> +Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs.

Are these SoCs x86-based?

> +Required properties:
> +- compatible
> +	"aspeed,ast2400-peci" or "aspeed,ast2500-peci"
> +	- aspeed,ast2400-peci: Aspeed AST2400 family PECI controller
> +	- aspeed,ast2500-peci: Aspeed AST2500 family PECI controller
> +
> +- reg
> +	Should contain PECI registers location and length.

Other dts documents put it on one line, reg: Should contain ...

> +- clock_frequency
> +	Should contain the operation frequency of PECI hardware module.
> +	187500 ~ 24000000

specify this is Hz?

> +- rd-sampling-point
> +	Read sampling point selection. The whole period of a bit time will be
> +	divided into 16 time frames. This value will determine which time frame
> +	this controller will sample PECI signal for data read back. Usually in
> +	the middle of a bit time is the best.

English? "This value will determine when this controller"?

> +	0 ~ 15 (default: 8)
> +
> +- cmd_timeout_ms
> +	Command timeout in units of ms.
> +	1 ~ 60000 (default: 1000)
> +
> +Example:
> +	peci: peci at 1e78b000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x1e78b000 0x60>;
> +
> +		peci0: peci-bus at 0 {
> +			compatible = "aspeed,ast2500-peci";
> +			reg = <0x0 0x60>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			interrupts = <15>;
> +			clocks = <&clk_clkin>;
> +			clock-frequency = <24000000>;
> +			msg-timing-nego = <1>;
> +			addr-timing-nego = <1>;
> +			rd-sampling-point = <8>;
> +			cmd-timeout-ms = <1000>;
> +		};
> +	};
> \ No newline at end of file

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180306/e7c86349/attachment.sig>

  parent reply	other threads:[~2018-03-06 12:40 UTC|newest]

Thread overview: 136+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-21 16:15 [PATCH v2 0/8] PECI device driver introduction Jae Hyun Yoo
2018-02-21 16:15 ` Jae Hyun Yoo
2018-02-21 16:15 ` Jae Hyun Yoo
2018-02-21 16:15 ` [PATCH v2 1/8] [PATCH 1/8] drivers/peci: Add support for PECI bus driver core Jae Hyun Yoo
2018-02-21 16:15   ` Jae Hyun Yoo
2018-02-21 16:15   ` Jae Hyun Yoo
2018-02-21 17:04   ` Andrew Lunn
2018-02-21 17:04     ` Andrew Lunn
2018-02-21 17:04     ` Andrew Lunn
2018-02-21 20:31     ` Jae Hyun Yoo
2018-02-21 20:31       ` Jae Hyun Yoo
2018-02-21 20:31       ` Jae Hyun Yoo
2018-02-21 21:51       ` Andrew Lunn
2018-02-21 21:51         ` Andrew Lunn
2018-02-21 21:51         ` Andrew Lunn
2018-02-21 22:03         ` Jae Hyun Yoo
2018-02-21 22:03           ` Jae Hyun Yoo
2018-02-21 22:03           ` Jae Hyun Yoo
2018-02-21 17:58   ` Greg KH
2018-02-21 17:58     ` Greg KH
2018-02-21 17:58     ` Greg KH
2018-02-21 20:42     ` Jae Hyun Yoo
2018-02-21 20:42       ` Jae Hyun Yoo
2018-02-21 20:42       ` Jae Hyun Yoo
2018-02-22  6:54       ` Greg KH
2018-02-22  6:54         ` Greg KH
2018-02-22  6:54         ` Greg KH
2018-02-22 17:20         ` Jae Hyun Yoo
2018-02-22 17:20           ` Jae Hyun Yoo
2018-02-22 17:20           ` Jae Hyun Yoo
2018-02-22  7:01   ` kbuild test robot
2018-02-22  7:01     ` kbuild test robot
2018-02-22  7:01     ` kbuild test robot
2018-02-22  7:01   ` [RFC PATCH] drivers/peci: peci_match_id() can be static kbuild test robot
2018-02-22  7:01     ` kbuild test robot
2018-02-22  7:01     ` kbuild test robot
2018-02-22 17:25     ` Jae Hyun Yoo
2018-02-22 17:25       ` Jae Hyun Yoo
2018-02-22 17:25       ` Jae Hyun Yoo
2018-03-07  3:19   ` [PATCH v2 1/8] [PATCH 1/8] drivers/peci: Add support for PECI bus driver core Julia Cartwright
2018-03-07  3:19     ` Julia Cartwright
2018-03-07  3:19     ` Julia Cartwright
2018-03-07 19:03     ` Jae Hyun Yoo
2018-03-07 19:03       ` Jae Hyun Yoo
2018-03-07 19:03       ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 2/8] [PATCH 2/8] Documentations: dt-bindings: Add a document of PECI adapter driver for Aspeed AST24xx/25xx SoCs Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 17:13   ` Andrew Lunn
2018-02-21 17:13     ` Andrew Lunn
2018-02-21 17:13     ` Andrew Lunn
2018-02-21 20:35     ` Jae Hyun Yoo
2018-02-21 20:35       ` Jae Hyun Yoo
2018-02-21 20:35       ` Jae Hyun Yoo
2018-03-06 12:40   ` Pavel Machek [this message]
2018-03-06 12:40     ` Pavel Machek
2018-03-06 12:54     ` Andrew Lunn
2018-03-06 12:54       ` Andrew Lunn
2018-03-06 12:54       ` Andrew Lunn
2018-03-06 13:05       ` Pavel Machek
2018-03-06 13:05         ` Pavel Machek
2018-03-06 13:19         ` Arnd Bergmann
2018-03-06 13:19           ` Arnd Bergmann
2018-03-06 13:19           ` Arnd Bergmann
2018-03-06 19:05     ` Jae Hyun Yoo
2018-03-06 19:05       ` Jae Hyun Yoo
2018-03-06 19:05       ` Jae Hyun Yoo
2018-03-07 22:11       ` Pavel Machek
2018-03-07 22:11         ` Pavel Machek
2018-03-07 22:11         ` Pavel Machek
2018-03-09 23:41         ` Milton Miller II
2018-03-09 23:41           ` Milton Miller II
2018-03-09 23:41           ` Milton Miller II
2018-03-09 23:47           ` Jae Hyun Yoo
2018-03-09 23:47             ` Jae Hyun Yoo
2018-03-09 23:47             ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 3/8] [PATCH 3/8] ARM: dts: aspeed: peci: Add PECI node Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 4/8] [PATCH 4/8] drivers/peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 5/8] [PATCH [5/8] Documentation: dt-bindings: Add a document for PECI hwmon client driver Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 6/8] [PATCH 6/8] Documentation: hwmon: " Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-03-06 20:28   ` Randy Dunlap
2018-03-06 20:28     ` Randy Dunlap
2018-03-06 20:28     ` Randy Dunlap
2018-03-06 21:08     ` Jae Hyun Yoo
2018-03-06 21:08       ` Jae Hyun Yoo
2018-03-06 21:08       ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 7/8] [PATCH 7/8] drivers/hwmon: Add a generic " Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 18:26   ` Guenter Roeck
2018-02-21 18:26     ` Guenter Roeck
2018-02-21 18:26     ` Guenter Roeck
2018-02-21 21:24     ` Jae Hyun Yoo
2018-02-21 21:24       ` Jae Hyun Yoo
2018-02-21 21:24       ` Jae Hyun Yoo
2018-02-21 21:48       ` Guenter Roeck
2018-02-21 21:48         ` Guenter Roeck
2018-02-21 21:48         ` Guenter Roeck
2018-02-21 23:07         ` Jae Hyun Yoo
2018-02-21 23:07           ` Jae Hyun Yoo
2018-02-21 23:07           ` Jae Hyun Yoo
2018-02-22  0:37           ` Andrew Lunn
2018-02-22  0:37             ` Andrew Lunn
2018-02-22  0:37             ` Andrew Lunn
2018-02-22  1:29             ` Jae Hyun Yoo
2018-02-22  1:29               ` Jae Hyun Yoo
2018-02-22  1:29               ` Jae Hyun Yoo
2018-02-24  0:00               ` Miguel Ojeda
2018-02-24  0:00                 ` Miguel Ojeda
2018-02-24  0:00                 ` Miguel Ojeda
2018-02-24  9:32                 ` Jae Hyun Yoo
2018-02-24  9:32                   ` Jae Hyun Yoo
2018-02-24  9:32                   ` Jae Hyun Yoo
2018-03-13  9:32   ` Stef van Os
2018-03-13  9:32     ` Stef van Os
2018-03-13  9:32     ` Stef van Os
2018-03-13  9:32     ` Stef van Os
2018-03-13 18:56     ` Jae Hyun Yoo
2018-03-13 18:56       ` Jae Hyun Yoo
2018-03-13 18:56       ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 8/8] [PATCH 8/8] Add a maintainer for the PECI subsystem Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-02-21 16:16   ` Jae Hyun Yoo
2018-03-06 12:40 ` [PATCH v2 0/8] PECI device driver introduction Pavel Machek
2018-03-06 12:40   ` Pavel Machek
2018-03-06 19:21   ` Jae Hyun Yoo
2018-03-06 19:21     ` Jae Hyun Yoo
2018-03-06 19:21     ` Jae Hyun Yoo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180306124002.GA13950@amd \
    --to=pavel@ucw.cz \
    --cc=andrew@aj.id.au \
    --cc=andrew@lunn.ch \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jae.hyun.yoo@linux.intel.com \
    --cc=jdelvare@suse.com \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.