All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tursulin@ursulin.net>
To: igt-dev@lists.freedesktop.org
Cc: Intel-gfx@lists.freedesktop.org,
	Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Subject: [igt-dev] [PATCH i-g-t 04/11] scripts/trace.pl: Calculate stats only after all munging
Date: Tue,  6 Mar 2018 12:43:08 +0000	[thread overview]
Message-ID: <20180306124315.30208-5-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <20180306124315.30208-1-tvrtko.ursulin@linux.intel.com>

From: John Harrison <John.C.Harrison@Intel.com>

There are various statistics being calculated multiple times in
multiple places while the log file is being read in. Some of these are
then re-calculated when the database is munged to correct various
issues with the logs. This patch consolidates the calculations into a
separate pass after all the reading and munging has been done.

Note that this actually produces a different final output as the
'execute-delay' values were not previously being re-calculated after
all the fixups. Thus were based on an incorrect calculation.

v2: Reduce scope of some local variables [Tvrtko]

Signed-off-by: John Harrison <John.C.Harrison@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/trace.pl | 54 ++++++++++++++++++++++++++++--------------------------
 1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/scripts/trace.pl b/scripts/trace.pl
index d571a870fca2..d880a733bff8 100755
--- a/scripts/trace.pl
+++ b/scripts/trace.pl
@@ -437,8 +437,7 @@ while (<>) {
 		$req{'global'} = $tp{'global'};
 		$req{'port'} = $tp{'port'};
 		$req{'queue'} = $queue{$key};
-		$req{'submit-delay'} = $submit{$key} - $queue{$key};
-		$req{'execute-delay'} = $req{'start'} - $submit{$key};
+		$req{'submit'} = $submit{$key};
 		$rings{$ring} = $gid++ unless exists $rings{$ring};
 		$ringmap{$rings{$ring}} = $ring;
 		$db{$key} = \%req;
@@ -458,8 +457,6 @@ while (<>) {
 			$db{$key}->{'notify'} = $db{$key}->{'end'};
 			$db{$key}->{'no-notify'} = 1;
 		}
-		$db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
-		$db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
 	} elsif ($tp_name eq 'i915:intel_engine_notify:') {
 		$notify{global_key($ring, $seqno)} = $time;
 	} elsif ($tp_name eq 'i915:intel_gpu_freq_change:') {
@@ -493,16 +490,11 @@ foreach my $key (keys %db) {
 			$db{$key}->{'notify'} = $db{$key}->{'end'};
 			$db{$key}->{'incomplete'} = 1;
 		}
-
-		$db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
-		$db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
 	} else {
 		# Notify arrived after context complete.
 		if (exists $db{$key}->{'no-notify'} and exists $notify{$gkey}) {
 			delete $db{$key}->{'no-notify'};
 			$db{$key}->{'notify'} = $notify{$gkey};
-			$db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
-			$db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
 		}
 	}
 }
@@ -528,8 +520,6 @@ foreach my $key (keys %db) {
 	if (exists $db{$next_key}) {
 		$db{$key}->{'notify'} = $db{$next_key}->{'end'};
 		$db{$key}->{'end'} = $db{$key}->{'notify'};
-		$db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
-		$db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
 	}
 }
 
@@ -573,17 +563,11 @@ foreach my $key (@sorted_keys) {
 	$first_ts = $db{$key}->{'queue'} if not defined $first_ts or $db{$key}->{'queue'} < $first_ts;
 	$last_ts = $end if $end > $last_ts;
 
-	$running{$ring} += $end - $db{$key}->{'start'} unless exists $db{$key}->{'no-end'};
-	$runnable{$ring} += $db{$key}->{'execute-delay'};
-	$queued{$ring} += $db{$key}->{'start'} - $db{$key}->{'execute-delay'} - $db{$key}->{'queue'};
-
-	$batch_count{$ring}++;
-
 	# correct duration of merged batches
 	if ($correct_durations and exists $db{$key}->{'no-end'}) {
-		my $start = $db{$key}->{'start'};
 		my $ctx = $db{$key}->{'ctx'};
 		my $seqno = $db{$key}->{'seqno'};
+		my $start = $db{$key}->{'start'};
 		my $next_key;
 		my $i = 1;
 
@@ -594,25 +578,43 @@ foreach my $key (@sorted_keys) {
 
 		# 20us tolerance
 		if (exists $db{$next_key} and $db{$next_key}->{'start'} < $start + 20) {
+			my $notify = $db{$key}->{'notify'};
 			$re_sort = 1;
-			$db{$next_key}->{'start'} = $start + $db{$key}->{'duration'};
+			$db{$next_key}->{'start'} = $notify;
 			$db{$next_key}->{'start'} = $db{$next_key}->{'end'} if $db{$next_key}->{'start'} > $db{$next_key}->{'end'};
-			$db{$next_key}->{'duration'} = $db{$next_key}->{'notify'} - $db{$next_key}->{'start'};
-			$end = $db{$key}->{'notify'};
 			die if $db{$next_key}->{'start'} > $db{$next_key}->{'end'};
 		}
-		die if $db{$key}->{'start'} > $db{$key}->{'end'};
+		die if $start > $end;
 	}
+}
+
+@sorted_keys = sort sortStart keys %db if $re_sort;
+
+foreach my $key (@sorted_keys) {
+	my $ring = $db{$key}->{'ring'};
+	my $end = $db{$key}->{'end'};
+	my $start = $db{$key}->{'start'};
+	my $notify = $db{$key}->{'notify'};
+
+	$db{$key}->{'context-complete-delay'} = $end - $notify;
+	$db{$key}->{'execute-delay'} = $start - $db{$key}->{'submit'};
+	$db{$key}->{'submit-delay'} = $db{$key}->{'submit'} - $db{$key}->{'queue'};
+	$db{$key}->{'duration'} = $notify - $start;
+
+	$running{$ring} += $end - $start unless exists $db{$key}->{'no-end'};
+	$runnable{$ring} += $db{$key}->{'execute-delay'};
+	$queued{$ring} += $start - $db{$key}->{'execute-delay'} - $db{$key}->{'queue'};
+
+	$batch_count{$ring}++;
+
 	$batch_avg{$ring} += $db{$key}->{'duration'};
-	$batch_total_avg{$ring} += $end - $db{$key}->{'start'};
+	$batch_total_avg{$ring} += $end - $start;
 
 	$submit_avg{$ring} += $db{$key}->{'submit-delay'};
 	$execute_avg{$ring} += $db{$key}->{'execute-delay'};
-	$ctxsave_avg{$ring} += $db{$key}->{'end'} - $db{$key}->{'notify'};
+	$ctxsave_avg{$ring} += $end - $notify;
 }
 
-@sorted_keys = sort sortStart keys %db if $re_sort;
-
 foreach my $ring (sort keys %batch_avg) {
 	$batch_avg{$ring} /= $batch_count{$ring};
 	$batch_total_avg{$ring} /= $batch_count{$ring};
-- 
2.14.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

WARNING: multiple messages have this Message-ID (diff)
From: Tvrtko Ursulin <tursulin@ursulin.net>
To: igt-dev@lists.freedesktop.org
Cc: Intel-gfx@lists.freedesktop.org
Subject: [PATCH i-g-t 04/11] scripts/trace.pl: Calculate stats only after all munging
Date: Tue,  6 Mar 2018 12:43:08 +0000	[thread overview]
Message-ID: <20180306124315.30208-5-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <20180306124315.30208-1-tvrtko.ursulin@linux.intel.com>

From: John Harrison <John.C.Harrison@Intel.com>

There are various statistics being calculated multiple times in
multiple places while the log file is being read in. Some of these are
then re-calculated when the database is munged to correct various
issues with the logs. This patch consolidates the calculations into a
separate pass after all the reading and munging has been done.

Note that this actually produces a different final output as the
'execute-delay' values were not previously being re-calculated after
all the fixups. Thus were based on an incorrect calculation.

v2: Reduce scope of some local variables [Tvrtko]

Signed-off-by: John Harrison <John.C.Harrison@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/trace.pl | 54 ++++++++++++++++++++++++++++--------------------------
 1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/scripts/trace.pl b/scripts/trace.pl
index d571a870fca2..d880a733bff8 100755
--- a/scripts/trace.pl
+++ b/scripts/trace.pl
@@ -437,8 +437,7 @@ while (<>) {
 		$req{'global'} = $tp{'global'};
 		$req{'port'} = $tp{'port'};
 		$req{'queue'} = $queue{$key};
-		$req{'submit-delay'} = $submit{$key} - $queue{$key};
-		$req{'execute-delay'} = $req{'start'} - $submit{$key};
+		$req{'submit'} = $submit{$key};
 		$rings{$ring} = $gid++ unless exists $rings{$ring};
 		$ringmap{$rings{$ring}} = $ring;
 		$db{$key} = \%req;
@@ -458,8 +457,6 @@ while (<>) {
 			$db{$key}->{'notify'} = $db{$key}->{'end'};
 			$db{$key}->{'no-notify'} = 1;
 		}
-		$db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
-		$db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
 	} elsif ($tp_name eq 'i915:intel_engine_notify:') {
 		$notify{global_key($ring, $seqno)} = $time;
 	} elsif ($tp_name eq 'i915:intel_gpu_freq_change:') {
@@ -493,16 +490,11 @@ foreach my $key (keys %db) {
 			$db{$key}->{'notify'} = $db{$key}->{'end'};
 			$db{$key}->{'incomplete'} = 1;
 		}
-
-		$db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
-		$db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
 	} else {
 		# Notify arrived after context complete.
 		if (exists $db{$key}->{'no-notify'} and exists $notify{$gkey}) {
 			delete $db{$key}->{'no-notify'};
 			$db{$key}->{'notify'} = $notify{$gkey};
-			$db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
-			$db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
 		}
 	}
 }
@@ -528,8 +520,6 @@ foreach my $key (keys %db) {
 	if (exists $db{$next_key}) {
 		$db{$key}->{'notify'} = $db{$next_key}->{'end'};
 		$db{$key}->{'end'} = $db{$key}->{'notify'};
-		$db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
-		$db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
 	}
 }
 
@@ -573,17 +563,11 @@ foreach my $key (@sorted_keys) {
 	$first_ts = $db{$key}->{'queue'} if not defined $first_ts or $db{$key}->{'queue'} < $first_ts;
 	$last_ts = $end if $end > $last_ts;
 
-	$running{$ring} += $end - $db{$key}->{'start'} unless exists $db{$key}->{'no-end'};
-	$runnable{$ring} += $db{$key}->{'execute-delay'};
-	$queued{$ring} += $db{$key}->{'start'} - $db{$key}->{'execute-delay'} - $db{$key}->{'queue'};
-
-	$batch_count{$ring}++;
-
 	# correct duration of merged batches
 	if ($correct_durations and exists $db{$key}->{'no-end'}) {
-		my $start = $db{$key}->{'start'};
 		my $ctx = $db{$key}->{'ctx'};
 		my $seqno = $db{$key}->{'seqno'};
+		my $start = $db{$key}->{'start'};
 		my $next_key;
 		my $i = 1;
 
@@ -594,25 +578,43 @@ foreach my $key (@sorted_keys) {
 
 		# 20us tolerance
 		if (exists $db{$next_key} and $db{$next_key}->{'start'} < $start + 20) {
+			my $notify = $db{$key}->{'notify'};
 			$re_sort = 1;
-			$db{$next_key}->{'start'} = $start + $db{$key}->{'duration'};
+			$db{$next_key}->{'start'} = $notify;
 			$db{$next_key}->{'start'} = $db{$next_key}->{'end'} if $db{$next_key}->{'start'} > $db{$next_key}->{'end'};
-			$db{$next_key}->{'duration'} = $db{$next_key}->{'notify'} - $db{$next_key}->{'start'};
-			$end = $db{$key}->{'notify'};
 			die if $db{$next_key}->{'start'} > $db{$next_key}->{'end'};
 		}
-		die if $db{$key}->{'start'} > $db{$key}->{'end'};
+		die if $start > $end;
 	}
+}
+
+@sorted_keys = sort sortStart keys %db if $re_sort;
+
+foreach my $key (@sorted_keys) {
+	my $ring = $db{$key}->{'ring'};
+	my $end = $db{$key}->{'end'};
+	my $start = $db{$key}->{'start'};
+	my $notify = $db{$key}->{'notify'};
+
+	$db{$key}->{'context-complete-delay'} = $end - $notify;
+	$db{$key}->{'execute-delay'} = $start - $db{$key}->{'submit'};
+	$db{$key}->{'submit-delay'} = $db{$key}->{'submit'} - $db{$key}->{'queue'};
+	$db{$key}->{'duration'} = $notify - $start;
+
+	$running{$ring} += $end - $start unless exists $db{$key}->{'no-end'};
+	$runnable{$ring} += $db{$key}->{'execute-delay'};
+	$queued{$ring} += $start - $db{$key}->{'execute-delay'} - $db{$key}->{'queue'};
+
+	$batch_count{$ring}++;
+
 	$batch_avg{$ring} += $db{$key}->{'duration'};
-	$batch_total_avg{$ring} += $end - $db{$key}->{'start'};
+	$batch_total_avg{$ring} += $end - $start;
 
 	$submit_avg{$ring} += $db{$key}->{'submit-delay'};
 	$execute_avg{$ring} += $db{$key}->{'execute-delay'};
-	$ctxsave_avg{$ring} += $db{$key}->{'end'} - $db{$key}->{'notify'};
+	$ctxsave_avg{$ring} += $end - $notify;
 }
 
-@sorted_keys = sort sortStart keys %db if $re_sort;
-
 foreach my $ring (sort keys %batch_avg) {
 	$batch_avg{$ring} /= $batch_count{$ring};
 	$batch_total_avg{$ring} /= $batch_count{$ring};
-- 
2.14.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-03-06 12:43 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-06 12:43 [Intel-gfx] [PATCH i-g-t v2 00/11] trace.pl fixes Tvrtko Ursulin
2018-03-06 12:43 ` Tvrtko Ursulin
2018-03-06 12:43 ` [Intel-gfx] [PATCH i-g-t 01/11] trace.pl: Catch-up with tracepoint renames Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 02/11] scripts/trace.pl: More hash key optimisations Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 03/11] scripts/trace.pl: Sort order Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-03-06 12:43 ` Tvrtko Ursulin [this message]
2018-03-06 12:43   ` [PATCH i-g-t 04/11] scripts/trace.pl: Calculate stats only after all munging Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 05/11] scripts/trace.pl: Simplify 'end' & 'notify' generation Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 06/11] trace.pl: Move sortQueue near its user Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-04-18 16:56   ` [Intel-gfx] [igt-dev] " Lionel Landwerlin
2018-04-18 16:56     ` Lionel Landwerlin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 07/11] trace.pl: Move min/max timestamp lookup to last loop Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-04-18 16:56   ` [igt-dev] " Lionel Landwerlin
2018-04-18 16:56     ` Lionel Landwerlin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 08/11] trace.pl: Fix engine busy accounting in split mode Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 09/11] trace.pl: Add support for colouring context execution Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-04-18 17:02   ` [igt-dev] [Intel-gfx] " Lionel Landwerlin
2018-04-18 17:02     ` Lionel Landwerlin
2018-03-06 12:43 ` [Intel-gfx] [PATCH i-g-t 10/11] trace.pl: Fix incomplete request handling Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 11/11] trace.pl: Fix request split mode Tvrtko Ursulin
2018-03-06 12:43   ` Tvrtko Ursulin
2018-03-06 14:18 ` [igt-dev] ✓ Fi.CI.BAT: success for trace.pl fixes (rev2) Patchwork
2018-03-06 19:29 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2018-04-18 14:52 ` [igt-dev] [PATCH i-g-t v2 00/11] trace.pl fixes Tvrtko Ursulin
2018-04-18 14:52   ` Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180306124315.30208-5-tvrtko.ursulin@linux.intel.com \
    --to=tursulin@ursulin.net \
    --cc=Intel-gfx@lists.freedesktop.org \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=tvrtko.ursulin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.