All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	kishon@ti.com, linux-mmc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 06/11] mmc: sdhci: Add quirk to disable HW timeout
Date: Wed, 7 Mar 2018 18:50:15 +0530	[thread overview]
Message-ID: <20180307132020.30951-7-kishon@ti.com> (raw)
In-Reply-To: <20180307132020.30951-1-kishon@ti.com>

Add quirk to disable HW timeout if the requested timeout is more than
the maximum obtainable timeout.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci.c | 27 +++++++++++++++++++++------
 drivers/mmc/host/sdhci.h |  5 +++++
 2 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index aa8b5ca0d1b0..1dd117cbeb6e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -767,12 +767,6 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 			break;
 	}
 
-	if (count >= 0xF) {
-		DBG("Too large timeout 0x%x requested for CMD%d!\n",
-		    count, cmd->opcode);
-		count = 0xE;
-	}
-
 	return count;
 }
 
@@ -790,6 +784,16 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
 	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
+static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable)
+{
+	if (enable)
+		host->ier |= SDHCI_INT_DATA_TIMEOUT;
+	else
+		host->ier &= ~SDHCI_INT_DATA_TIMEOUT;
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
 static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 {
 	u8 count;
@@ -798,6 +802,17 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 		host->ops->set_timeout(host, cmd);
 	} else {
 		count = sdhci_calc_timeout(host, cmd);
+		if (count >= 0xF &&
+		    host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT)
+			sdhci_set_data_timeout_irq(host, false);
+		else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT))
+			sdhci_set_data_timeout_irq(host, true);
+
+		if (count >= 0xF) {
+			DBG("Too large timeout 0x%x requested for CMD%d!\n",
+			    count, cmd->opcode);
+			count = 0xE;
+		}
 		sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
 	}
 }
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c95b0a4a7594..ff283ee08854 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -437,6 +437,11 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN		(1<<15)
 /* Controller has CRC in 136 bit Command Response */
 #define SDHCI_QUIRK2_RSP_136_HAS_CRC			(1<<16)
+/*
+ * Disable HW timeout if the requested timeout is more than the maximum
+ * obtainable timeout
+ */
+#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT			(1<<17)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 06/11] mmc: sdhci: Add quirk to disable HW timeout
Date: Wed, 7 Mar 2018 18:50:15 +0530	[thread overview]
Message-ID: <20180307132020.30951-7-kishon@ti.com> (raw)
In-Reply-To: <20180307132020.30951-1-kishon@ti.com>

Add quirk to disable HW timeout if the requested timeout is more than
the maximum obtainable timeout.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci.c | 27 +++++++++++++++++++++------
 drivers/mmc/host/sdhci.h |  5 +++++
 2 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index aa8b5ca0d1b0..1dd117cbeb6e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -767,12 +767,6 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 			break;
 	}
 
-	if (count >= 0xF) {
-		DBG("Too large timeout 0x%x requested for CMD%d!\n",
-		    count, cmd->opcode);
-		count = 0xE;
-	}
-
 	return count;
 }
 
@@ -790,6 +784,16 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
 	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
+static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable)
+{
+	if (enable)
+		host->ier |= SDHCI_INT_DATA_TIMEOUT;
+	else
+		host->ier &= ~SDHCI_INT_DATA_TIMEOUT;
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
 static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 {
 	u8 count;
@@ -798,6 +802,17 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 		host->ops->set_timeout(host, cmd);
 	} else {
 		count = sdhci_calc_timeout(host, cmd);
+		if (count >= 0xF &&
+		    host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT)
+			sdhci_set_data_timeout_irq(host, false);
+		else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT))
+			sdhci_set_data_timeout_irq(host, true);
+
+		if (count >= 0xF) {
+			DBG("Too large timeout 0x%x requested for CMD%d!\n",
+			    count, cmd->opcode);
+			count = 0xE;
+		}
 		sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
 	}
 }
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c95b0a4a7594..ff283ee08854 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -437,6 +437,11 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN		(1<<15)
 /* Controller has CRC in 136 bit Command Response */
 #define SDHCI_QUIRK2_RSP_136_HAS_CRC			(1<<16)
+/*
+ * Disable HW timeout if the requested timeout is more than the maximum
+ * obtainable timeout
+ */
+#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT			(1<<17)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>, <kishon@ti.com>,
	<linux-mmc@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 06/11] mmc: sdhci: Add quirk to disable HW timeout
Date: Wed, 7 Mar 2018 18:50:15 +0530	[thread overview]
Message-ID: <20180307132020.30951-7-kishon@ti.com> (raw)
In-Reply-To: <20180307132020.30951-1-kishon@ti.com>

Add quirk to disable HW timeout if the requested timeout is more than
the maximum obtainable timeout.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci.c | 27 +++++++++++++++++++++------
 drivers/mmc/host/sdhci.h |  5 +++++
 2 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index aa8b5ca0d1b0..1dd117cbeb6e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -767,12 +767,6 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 			break;
 	}
 
-	if (count >= 0xF) {
-		DBG("Too large timeout 0x%x requested for CMD%d!\n",
-		    count, cmd->opcode);
-		count = 0xE;
-	}
-
 	return count;
 }
 
@@ -790,6 +784,16 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
 	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
+static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable)
+{
+	if (enable)
+		host->ier |= SDHCI_INT_DATA_TIMEOUT;
+	else
+		host->ier &= ~SDHCI_INT_DATA_TIMEOUT;
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
 static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 {
 	u8 count;
@@ -798,6 +802,17 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 		host->ops->set_timeout(host, cmd);
 	} else {
 		count = sdhci_calc_timeout(host, cmd);
+		if (count >= 0xF &&
+		    host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT)
+			sdhci_set_data_timeout_irq(host, false);
+		else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT))
+			sdhci_set_data_timeout_irq(host, true);
+
+		if (count >= 0xF) {
+			DBG("Too large timeout 0x%x requested for CMD%d!\n",
+			    count, cmd->opcode);
+			count = 0xE;
+		}
 		sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
 	}
 }
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c95b0a4a7594..ff283ee08854 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -437,6 +437,11 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN		(1<<15)
 /* Controller has CRC in 136 bit Command Response */
 #define SDHCI_QUIRK2_RSP_136_HAS_CRC			(1<<16)
+/*
+ * Disable HW timeout if the requested timeout is more than the maximum
+ * obtainable timeout
+ */
+#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT			(1<<17)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
-- 
2.11.0

  parent reply	other threads:[~2018-03-07 13:20 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-07 13:20 [PATCH v3 00/11] mmc: sdhci-omap: Add UHS/HS200 mode support Kishon Vijay Abraham I
2018-03-07 13:20 ` Kishon Vijay Abraham I
2018-03-07 13:20 ` Kishon Vijay Abraham I
2018-03-07 13:20 ` [PATCH v3 01/11] mmc: sdhci-omap: Fix when capabilities are obtained from SDHCI_CAPABILITIES reg Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-15 14:17   ` Adrian Hunter
2018-03-15 14:17     ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 02/11] mmc: sdhci-omap: Remove setting ADMA capability in driver Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-15 14:18   ` Adrian Hunter
2018-03-15 14:18     ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 03/11] mmc: sdhci-omap: Workaround for Errata i843 Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-15 14:24   ` Adrian Hunter
2018-03-15 14:24     ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 04/11] mmc: sdhci-omap: Invoke sdhci_get_of_property to read sdhci dt properties Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-15 14:27   ` Adrian Hunter
2018-03-15 14:27     ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 05/11] mmc: sdhci: Disable HS200 mode if controller can't support 1.8v Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-15 10:58   ` Adrian Hunter
2018-03-15 10:58     ` Adrian Hunter
2018-03-07 13:20 ` Kishon Vijay Abraham I [this message]
2018-03-07 13:20   ` [PATCH v3 06/11] mmc: sdhci: Add quirk to disable HW timeout Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-15 11:26   ` Adrian Hunter
2018-03-15 11:26     ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 07/11] mmc: sdhci: Program a relatively accurate SW timeout value Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-15 13:13   ` Adrian Hunter
2018-03-15 13:13     ` Adrian Hunter
2018-03-16  6:29     ` Kishon Vijay Abraham I
2018-03-16  6:29       ` Kishon Vijay Abraham I
2018-03-16  6:29       ` Kishon Vijay Abraham I
2018-03-16 14:21       ` Adrian Hunter
2018-03-16 14:21         ` Adrian Hunter
2018-03-19  9:20         ` Kishon Vijay Abraham I
2018-03-19  9:20           ` Kishon Vijay Abraham I
2018-03-19  9:20           ` Kishon Vijay Abraham I
2018-03-19 10:00           ` Adrian Hunter
2018-03-19 10:00             ` Adrian Hunter
2018-03-19 10:19             ` Kishon Vijay Abraham I
2018-03-19 10:19               ` Kishon Vijay Abraham I
2018-03-19 10:19               ` Kishon Vijay Abraham I
2018-03-20  9:48               ` Kishon Vijay Abraham I
2018-03-20  9:48                 ` Kishon Vijay Abraham I
2018-03-20  9:48                 ` Kishon Vijay Abraham I
2018-04-04 12:48                 ` Adrian Hunter
2018-04-04 12:48                   ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 08/11] mmc: sdhci-omap: Workaround for Errata i834 Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20 ` [PATCH v3 09/11] dt-bindings: sdhci-omap: Add K2G specific binding Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20 ` [PATCH v3 10/11] mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20 ` [PATCH v3 11/11] mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-07 13:20   ` Kishon Vijay Abraham I
2018-03-15 14:34   ` Adrian Hunter
2018-03-15 14:34     ` Adrian Hunter
2018-03-07 15:12 ` [PATCH v3 00/11] mmc: sdhci-omap: Add UHS/HS200 mode support Tony Lindgren
2018-03-07 15:12   ` Tony Lindgren
2018-03-15  8:47 ` Ulf Hansson
2018-03-15  8:47   ` Ulf Hansson
2018-03-15  8:52   ` Adrian Hunter
2018-03-15  8:52     ` Adrian Hunter
2018-03-15 10:02     ` Kishon Vijay Abraham I
2018-03-15 10:02       ` Kishon Vijay Abraham I
2018-03-15 10:02       ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180307132020.30951-7-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.