* [PATCH] video: fbdev: via_aux_vt1636: remove VLA usage @ 2018-03-07 19:47 ` Gustavo A. R. Silva 0 siblings, 0 replies; 5+ messages in thread From: Gustavo A. R. Silva @ 2018-03-07 19:47 UTC (permalink / raw) To: Florian Tobias Schandinat, Bartlomiej Zolnierkiewicz Cc: linux-fbdev, dri-devel, linux-kernel, Gustavo A. R. Silva In preparation to enabling -Wvla, remove VLA and replace it with a fixed-length array instead. Also, remove variable 'len'. Notice that no new IDs have been added in seven years. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> --- drivers/video/fbdev/via/via_aux_vt1636.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/fbdev/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c index 9e015c1..d6273a4 100644 --- a/drivers/video/fbdev/via/via_aux_vt1636.c +++ b/drivers/video/fbdev/via/via_aux_vt1636.c @@ -35,10 +35,10 @@ void via_aux_vt1636_probe(struct via_aux_bus *bus) .addr = 0x40, .name = name}; /* check vendor id and device id */ - const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id); - u8 tmp[len]; + const u8 id[4] = {0x06, 0x11, 0x45, 0x33}; + u8 tmp[4]; - if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len)) + if (!via_aux_read(&drv, 0x00, tmp, 4) || memcmp(id, tmp, 4)) return; printk(KERN_INFO "viafb: Found %s\n", name); -- 2.7.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] video: fbdev: via_aux_vt1636: remove VLA usage @ 2018-03-07 19:47 ` Gustavo A. R. Silva 0 siblings, 0 replies; 5+ messages in thread From: Gustavo A. R. Silva @ 2018-03-07 19:47 UTC (permalink / raw) To: Florian Tobias Schandinat, Bartlomiej Zolnierkiewicz Cc: linux-fbdev, dri-devel, linux-kernel, Gustavo A. R. Silva In preparation to enabling -Wvla, remove VLA and replace it with a fixed-length array instead. Also, remove variable 'len'. Notice that no new IDs have been added in seven years. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> --- drivers/video/fbdev/via/via_aux_vt1636.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/fbdev/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c index 9e015c1..d6273a4 100644 --- a/drivers/video/fbdev/via/via_aux_vt1636.c +++ b/drivers/video/fbdev/via/via_aux_vt1636.c @@ -35,10 +35,10 @@ void via_aux_vt1636_probe(struct via_aux_bus *bus) .addr = 0x40, .name = name}; /* check vendor id and device id */ - const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id); - u8 tmp[len]; + const u8 id[4] = {0x06, 0x11, 0x45, 0x33}; + u8 tmp[4]; - if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len)) + if (!via_aux_read(&drv, 0x00, tmp, 4) || memcmp(id, tmp, 4)) return; printk(KERN_INFO "viafb: Found %s\n", name); -- 2.7.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] video: fbdev: via_aux_vt1636: remove VLA usage 2018-03-07 19:47 ` Gustavo A. R. Silva (?) @ 2018-03-09 10:11 ` Eric Engestrom -1 siblings, 0 replies; 5+ messages in thread From: Eric Engestrom @ 2018-03-09 10:11 UTC (permalink / raw) To: Gustavo A. R. Silva Cc: linux-fbdev, Bartlomiej Zolnierkiewicz, Florian Tobias Schandinat, linux-kernel, dri-devel, Gustavo A. R. Silva On Wednesday, 2018-03-07 13:47:03 -0600, Gustavo A. R. Silva wrote: > In preparation to enabling -Wvla, remove VLA and replace it > with a fixed-length array instead. Also, remove variable 'len'. > > Notice that no new IDs have been added in seven years. > > Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> > --- > drivers/video/fbdev/via/via_aux_vt1636.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/video/fbdev/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c > index 9e015c1..d6273a4 100644 > --- a/drivers/video/fbdev/via/via_aux_vt1636.c > +++ b/drivers/video/fbdev/via/via_aux_vt1636.c > @@ -35,10 +35,10 @@ void via_aux_vt1636_probe(struct via_aux_bus *bus) > .addr = 0x40, > .name = name}; > /* check vendor id and device id */ > - const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id); > - u8 tmp[len]; > + const u8 id[4] = {0x06, 0x11, 0x45, 0x33}; > + u8 tmp[4]; > > - if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len)) > + if (!via_aux_read(&drv, 0x00, tmp, 4) || memcmp(id, tmp, 4)) I would recommend keeping ARRAY_SIZE(); even if nothing's been added in a while, it's still clearer in the code if we can see where these `4` come from. Something like this instead? ----8<---- @@ -35,10 +35,10 @@ void via_aux_vt1636_probe(struct via_aux_bus *bus) .addr = 0x40, .name = name}; /* check vendor id and device id */ - const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id); - u8 tmp[len]; + const u8 id[] = {0x06, 0x11, 0x45, 0x33}; + u8 tmp[ARRAY_SIZE(id)]; - if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len)) + if (!via_aux_read(&drv, 0x00, tmp, ARRAY_SIZE(id)) || memcmp(id, tmp, ARRAY_SIZE(id))) return; printk(KERN_INFO "viafb: Found %s\n", name); ---->8---- Note that sizeof is evaluated a compile time, so `u8 tmp[ARRAY_SIZE(id)]` is *not* a VLA. All that's needed was to remove `len` :) > return; > > printk(KERN_INFO "viafb: Found %s\n", name); > -- > 2.7.4 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] video: fbdev: via_aux_vt1636: remove VLA usage @ 2018-03-09 10:11 ` Eric Engestrom 0 siblings, 0 replies; 5+ messages in thread From: Eric Engestrom @ 2018-03-09 10:11 UTC (permalink / raw) To: Gustavo A. R. Silva Cc: Florian Tobias Schandinat, Bartlomiej Zolnierkiewicz, linux-fbdev, Gustavo A. R. Silva, linux-kernel, dri-devel On Wednesday, 2018-03-07 13:47:03 -0600, Gustavo A. R. Silva wrote: > In preparation to enabling -Wvla, remove VLA and replace it > with a fixed-length array instead. Also, remove variable 'len'. > > Notice that no new IDs have been added in seven years. > > Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> > --- > drivers/video/fbdev/via/via_aux_vt1636.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/video/fbdev/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c > index 9e015c1..d6273a4 100644 > --- a/drivers/video/fbdev/via/via_aux_vt1636.c > +++ b/drivers/video/fbdev/via/via_aux_vt1636.c > @@ -35,10 +35,10 @@ void via_aux_vt1636_probe(struct via_aux_bus *bus) > .addr = 0x40, > .name = name}; > /* check vendor id and device id */ > - const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id); > - u8 tmp[len]; > + const u8 id[4] = {0x06, 0x11, 0x45, 0x33}; > + u8 tmp[4]; > > - if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len)) > + if (!via_aux_read(&drv, 0x00, tmp, 4) || memcmp(id, tmp, 4)) I would recommend keeping ARRAY_SIZE(); even if nothing's been added in a while, it's still clearer in the code if we can see where these `4` come from. Something like this instead? ----8<---- @@ -35,10 +35,10 @@ void via_aux_vt1636_probe(struct via_aux_bus *bus) .addr = 0x40, .name = name}; /* check vendor id and device id */ - const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id); - u8 tmp[len]; + const u8 id[] = {0x06, 0x11, 0x45, 0x33}; + u8 tmp[ARRAY_SIZE(id)]; - if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len)) + if (!via_aux_read(&drv, 0x00, tmp, ARRAY_SIZE(id)) || memcmp(id, tmp, ARRAY_SIZE(id))) return; printk(KERN_INFO "viafb: Found %s\n", name); ---->8---- Note that sizeof is evaluated a compile time, so `u8 tmp[ARRAY_SIZE(id)]` is *not* a VLA. All that's needed was to remove `len` :) > return; > > printk(KERN_INFO "viafb: Found %s\n", name); > -- > 2.7.4 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] video: fbdev: via_aux_vt1636: remove VLA usage @ 2018-03-09 10:11 ` Eric Engestrom 0 siblings, 0 replies; 5+ messages in thread From: Eric Engestrom @ 2018-03-09 10:11 UTC (permalink / raw) To: Gustavo A. R. Silva Cc: linux-fbdev, Bartlomiej Zolnierkiewicz, Florian Tobias Schandinat, linux-kernel, dri-devel, Gustavo A. R. Silva On Wednesday, 2018-03-07 13:47:03 -0600, Gustavo A. R. Silva wrote: > In preparation to enabling -Wvla, remove VLA and replace it > with a fixed-length array instead. Also, remove variable 'len'. > > Notice that no new IDs have been added in seven years. > > Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> > --- > drivers/video/fbdev/via/via_aux_vt1636.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/video/fbdev/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c > index 9e015c1..d6273a4 100644 > --- a/drivers/video/fbdev/via/via_aux_vt1636.c > +++ b/drivers/video/fbdev/via/via_aux_vt1636.c > @@ -35,10 +35,10 @@ void via_aux_vt1636_probe(struct via_aux_bus *bus) > .addr = 0x40, > .name = name}; > /* check vendor id and device id */ > - const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id); > - u8 tmp[len]; > + const u8 id[4] = {0x06, 0x11, 0x45, 0x33}; > + u8 tmp[4]; > > - if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len)) > + if (!via_aux_read(&drv, 0x00, tmp, 4) || memcmp(id, tmp, 4)) I would recommend keeping ARRAY_SIZE(); even if nothing's been added in a while, it's still clearer in the code if we can see where these `4` come from. Something like this instead? ----8<---- @@ -35,10 +35,10 @@ void via_aux_vt1636_probe(struct via_aux_bus *bus) .addr = 0x40, .name = name}; /* check vendor id and device id */ - const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id); - u8 tmp[len]; + const u8 id[] = {0x06, 0x11, 0x45, 0x33}; + u8 tmp[ARRAY_SIZE(id)]; - if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len)) + if (!via_aux_read(&drv, 0x00, tmp, ARRAY_SIZE(id)) || memcmp(id, tmp, ARRAY_SIZE(id))) return; printk(KERN_INFO "viafb: Found %s\n", name); ---->8---- Note that sizeof is evaluated a compile time, so `u8 tmp[ARRAY_SIZE(id)]` is *not* a VLA. All that's needed was to remove `len` :) > return; > > printk(KERN_INFO "viafb: Found %s\n", name); > -- > 2.7.4 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-03-09 10:11 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-03-07 19:47 [PATCH] video: fbdev: via_aux_vt1636: remove VLA usage Gustavo A. R. Silva 2018-03-07 19:47 ` Gustavo A. R. Silva 2018-03-09 10:11 ` Eric Engestrom 2018-03-09 10:11 ` Eric Engestrom 2018-03-09 10:11 ` Eric Engestrom
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.