From: plaes@plaes.org (Priit Laes)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi] [PATCH 6/9] sunxi-cedrus: Add device tree binding document
Date: Fri, 9 Mar 2018 15:38:57 +0200 [thread overview]
Message-ID: <20180309133857.GA20392@solar> (raw)
In-Reply-To: <20180309101445.16190-4-paul.kocialkowski@bootlin.com>
On Fri, Mar 09, 2018 at 11:14:42AM +0100, Paul Kocialkowski wrote:
> From: Florent Revest <florent.revest@free-electrons.com>
>
> Device Tree bindings for the Allwinner's video engine
>
> Signed-off-by: Florent Revest <florent.revest@free-electrons.com>
> ---
> .../devicetree/bindings/media/sunxi-cedrus.txt | 44 ++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/sunxi-cedrus.txt
>
> diff --git a/Documentation/devicetree/bindings/media/sunxi-cedrus.txt b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> new file mode 100644
> index 000000000000..138581113c49
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> @@ -0,0 +1,44 @@
> +Device-Tree bindings for SUNXI video engine found in sunXi SoC family
> +
> +Required properties:
> +- compatible : "allwinner,sun4i-a10-video-engine";
> +- memory-region : DMA pool for buffers allocation;
> +- clocks : list of clock specifiers, corresponding to
> + entries in clock-names property;
> +- clock-names : should contain "ahb", "mod" and "ram" entries;
> +- resets : phandle for reset;
> +- interrupts : should contain VE interrupt number;
> +- reg : should contain register base and length of VE.
> +
> +Example:
> +
> +reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + ve_reserved: cma {
> + compatible = "shared-dma-pool";
> + reg = <0x43d00000 0x9000000>;
> + no-map;
> + linux,cma-default;
> + };
> +};
> +
> +video-engine {
> + compatible = "allwinner,sun4i-a10-video-engine";
> + memory-region = <&ve_reserved>;
> +
> + clocks = <&ahb_gates 32>, <&ccu CLK_VE>,
> + <&dram_gates 0>;
This should be updated to sunxi-ng clocks:
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, <&ccu CLK_DRAM_VE>;
> + clock-names = "ahb", "mod", "ram";
> +
> + assigned-clocks = <&ccu CLK_VE>;
> + assigned-clock-rates = <320000000>;
> +
> + resets = <&ccu RST_VE>;
> +
> + interrupts = <53>;
> +
> + reg = <0x01c0e000 4096>;
> +};
> --
> 2.16.2
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
To: Paul Kocialkowski
<paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
Cc: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>,
Florent Revest
<revestflo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alexandre Courbot
<acourbot-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Hans Verkuil
<hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
Sakari Ailus
<sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Thomas van Kleef <thomas-XCRq7eEM0/pmR6Xm/wNWPw@public.gmane.org>,
"Signed-off-by : Bob Ham"
<rah-2mWpNWY8JZLk1uMJSBkQmQ@public.gmane.org>,
Thomas Petazzoni
<thomas.petazzoni-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Subject: Re: [PATCH 6/9] sunxi-cedrus: Add device tree binding document
Date: Fri, 9 Mar 2018 15:38:57 +0200 [thread overview]
Message-ID: <20180309133857.GA20392@solar> (raw)
In-Reply-To: <20180309101445.16190-4-paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
On Fri, Mar 09, 2018 at 11:14:42AM +0100, Paul Kocialkowski wrote:
> From: Florent Revest <florent.revest-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
>
> Device Tree bindings for the Allwinner's video engine
>
> Signed-off-by: Florent Revest <florent.revest-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
> .../devicetree/bindings/media/sunxi-cedrus.txt | 44 ++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/sunxi-cedrus.txt
>
> diff --git a/Documentation/devicetree/bindings/media/sunxi-cedrus.txt b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> new file mode 100644
> index 000000000000..138581113c49
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> @@ -0,0 +1,44 @@
> +Device-Tree bindings for SUNXI video engine found in sunXi SoC family
> +
> +Required properties:
> +- compatible : "allwinner,sun4i-a10-video-engine";
> +- memory-region : DMA pool for buffers allocation;
> +- clocks : list of clock specifiers, corresponding to
> + entries in clock-names property;
> +- clock-names : should contain "ahb", "mod" and "ram" entries;
> +- resets : phandle for reset;
> +- interrupts : should contain VE interrupt number;
> +- reg : should contain register base and length of VE.
> +
> +Example:
> +
> +reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + ve_reserved: cma {
> + compatible = "shared-dma-pool";
> + reg = <0x43d00000 0x9000000>;
> + no-map;
> + linux,cma-default;
> + };
> +};
> +
> +video-engine {
> + compatible = "allwinner,sun4i-a10-video-engine";
> + memory-region = <&ve_reserved>;
> +
> + clocks = <&ahb_gates 32>, <&ccu CLK_VE>,
> + <&dram_gates 0>;
This should be updated to sunxi-ng clocks:
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, <&ccu CLK_DRAM_VE>;
> + clock-names = "ahb", "mod", "ram";
> +
> + assigned-clocks = <&ccu CLK_VE>;
> + assigned-clock-rates = <320000000>;
> +
> + resets = <&ccu RST_VE>;
> +
> + interrupts = <53>;
> +
> + reg = <0x01c0e000 4096>;
> +};
> --
> 2.16.2
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: Priit Laes <plaes@plaes.org>
To: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Icenowy Zheng <icenowy@aosc.xyz>,
Florent Revest <revestflo@gmail.com>,
Alexandre Courbot <acourbot@chromium.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Thomas van Kleef <thomas@vitsch.nl>,
"Signed-off-by : Bob Ham" <rah@settrans.net>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>
Subject: Re: [linux-sunxi] [PATCH 6/9] sunxi-cedrus: Add device tree binding document
Date: Fri, 9 Mar 2018 15:38:57 +0200 [thread overview]
Message-ID: <20180309133857.GA20392@solar> (raw)
In-Reply-To: <20180309101445.16190-4-paul.kocialkowski@bootlin.com>
On Fri, Mar 09, 2018 at 11:14:42AM +0100, Paul Kocialkowski wrote:
> From: Florent Revest <florent.revest@free-electrons.com>
>
> Device Tree bindings for the Allwinner's video engine
>
> Signed-off-by: Florent Revest <florent.revest@free-electrons.com>
> ---
> .../devicetree/bindings/media/sunxi-cedrus.txt | 44 ++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/sunxi-cedrus.txt
>
> diff --git a/Documentation/devicetree/bindings/media/sunxi-cedrus.txt b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> new file mode 100644
> index 000000000000..138581113c49
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
> @@ -0,0 +1,44 @@
> +Device-Tree bindings for SUNXI video engine found in sunXi SoC family
> +
> +Required properties:
> +- compatible : "allwinner,sun4i-a10-video-engine";
> +- memory-region : DMA pool for buffers allocation;
> +- clocks : list of clock specifiers, corresponding to
> + entries in clock-names property;
> +- clock-names : should contain "ahb", "mod" and "ram" entries;
> +- resets : phandle for reset;
> +- interrupts : should contain VE interrupt number;
> +- reg : should contain register base and length of VE.
> +
> +Example:
> +
> +reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + ve_reserved: cma {
> + compatible = "shared-dma-pool";
> + reg = <0x43d00000 0x9000000>;
> + no-map;
> + linux,cma-default;
> + };
> +};
> +
> +video-engine {
> + compatible = "allwinner,sun4i-a10-video-engine";
> + memory-region = <&ve_reserved>;
> +
> + clocks = <&ahb_gates 32>, <&ccu CLK_VE>,
> + <&dram_gates 0>;
This should be updated to sunxi-ng clocks:
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, <&ccu CLK_DRAM_VE>;
> + clock-names = "ahb", "mod", "ram";
> +
> + assigned-clocks = <&ccu CLK_VE>;
> + assigned-clock-rates = <320000000>;
> +
> + resets = <&ccu RST_VE>;
> +
> + interrupts = <53>;
> +
> + reg = <0x01c0e000 4096>;
> +};
> --
> 2.16.2
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2018-03-09 13:38 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-09 10:09 [PATCH 0/9] Sunxi-Cedrus driver for the Allwinner Video Engine, using the V4L2 request API Paul Kocialkowski
2018-03-09 10:09 ` Paul Kocialkowski
2018-03-09 10:09 ` [PATCH 1/9] media: vim2m: Try to schedule a m2m device run on request submission Paul Kocialkowski
2018-03-09 10:09 ` Paul Kocialkowski
2018-03-09 10:09 ` Paul Kocialkowski
2018-03-09 10:09 ` [PATCH 2/9] media: videobuf2-v4l2: Copy planes when needed in request qbuf Paul Kocialkowski
2018-03-09 10:09 ` Paul Kocialkowski
2018-03-09 10:14 ` [PATCH 3/9] v4l: Add sunxi Video Engine pixel format Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-09 10:14 ` [PATCH 4/9] v4l: Add MPEG2 low-level decoder API control Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-09 10:14 ` [PATCH 5/9] media: platform: Add Sunxi Cedrus decoder driver Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-09 13:57 ` Maxime Ripard
2018-03-09 13:57 ` Maxime Ripard
2018-03-09 14:25 ` Paul Kocialkowski
2018-03-09 14:25 ` Paul Kocialkowski
2018-04-19 14:58 ` Paul Kocialkowski
2018-04-19 14:58 ` Paul Kocialkowski
2018-04-19 14:58 ` Paul Kocialkowski
2018-03-12 17:15 ` [linux-sunxi] " Joonas Kylmälä
2018-03-12 17:15 ` Joonas Kylmälä
2018-03-12 17:15 ` Joonas Kylmälä
2018-04-19 14:56 ` [linux-sunxi] " Paul Kocialkowski
2018-04-19 14:56 ` Paul Kocialkowski
2018-04-19 14:56 ` Paul Kocialkowski
2018-03-12 20:29 ` [linux-sunxi] " Joonas Kylmälä
2018-03-12 20:29 ` Joonas Kylmälä
2018-03-12 20:29 ` Joonas Kylmälä
2018-04-19 14:56 ` [linux-sunxi] " Paul Kocialkowski
2018-04-19 14:56 ` Paul Kocialkowski
2018-04-19 14:56 ` Paul Kocialkowski
2018-03-09 10:14 ` [PATCH 6/9] sunxi-cedrus: Add device tree binding document Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-09 13:38 ` Priit Laes [this message]
2018-03-09 13:38 ` [linux-sunxi] " Priit Laes
2018-03-09 13:38 ` Priit Laes
2018-03-09 13:45 ` [linux-sunxi] " Paul Kocialkowski
2018-03-09 13:45 ` Paul Kocialkowski
2018-03-18 12:48 ` Rob Herring
2018-03-18 12:48 ` Rob Herring
2018-03-18 12:48 ` Rob Herring
2018-04-19 14:55 ` Paul Kocialkowski
2018-04-19 14:55 ` Paul Kocialkowski
2018-04-19 14:55 ` Paul Kocialkowski
2018-03-09 10:14 ` [PATCH 7/9] ARM: dts: sun5i: Use video-engine node Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-09 10:14 ` [PATCH 8/9] ARM: dts: sun8i: add video engine support for A33 Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-09 10:14 ` [PATCH 9/9] ARM: dts: sun7i: Add video engine support for the A20 Paul Kocialkowski
2018-03-09 10:14 ` Paul Kocialkowski
2018-03-12 18:18 ` [linux-sunxi] [PATCH 2/9] media: videobuf2-v4l2: Copy planes when needed in request qbuf Joonas Kylmälä
2018-03-12 18:18 ` Joonas Kylmälä
2018-03-12 18:18 ` Joonas Kylmälä
2018-03-09 10:18 ` [PATCH 0/9] Sunxi-Cedrus driver for the Allwinner Video Engine, using the V4L2 request API Paul Kocialkowski
2018-03-09 10:18 ` Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180309133857.GA20392@solar \
--to=plaes@plaes.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.