From: Rajendra Nayak <rnayak@codeaurora.org>
To: andy.gross@linaro.org
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, swboyd@chromium.org,
evgreen@chromium.org, bjorn.andersson@linaro.org,
dianders@chromium.org, marc.zyngier@arm.com,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v7 0/3] Add DTS for SDM845 SoC and MTP
Date: Mon, 12 Mar 2018 19:42:21 +0530 [thread overview]
Message-ID: <20180312141224.11907-1-rnayak@codeaurora.org> (raw)
These are basic device tree files needed to boot a SDM845 MTP
board to a ramfs based serial console shell
Bindings are based on whats proposed for pinctrl/serial/clock
drivers for SDM845 SoC
pinctrl: https://patchwork.kernel.org/patch/10157143/ (This is now pulled
in by Linus Walleij for 4.17)
clocks: https://lkml.org/lkml/2018/1/31/209 (under review)
I have dropped the patch that adds the serial/geni nodes from v6/7, as that
will be reposted along with the geni patch series by Karthik
Since 'PATCH 3/3' also adds an ITS node and keeps it disabled, we also depend
on https://lkml.org/lkml/2018/1/29/383
Andy, since we aren't adding anything new for clocks (gcc) and pinctrl,
do these look good to be pulled in for 4.17?
changes in v7:
* Dropped redistributor-stride and #redistributor-regions as suggested
by Marc Zyngier
changes in v6:
* added the missing power-domain-cells property for gcc as reported
by Doug Anderson
* Dropped the patch which added geni/serial nodes in dts. Karthik has
agreed to carry that patch along with his GENI series.
changes in v5:
* Removed all instances of IRQ_TYPE_NONE
changes in v4:
* pull config changes to uart pins
* License in device tree files is still GPL-2.0
changes in v3:
* split the pinmux/pinconf nodes across SoC/Board files
* Fixes for issues reported with 'make dtbs W=2'
* other minor fixes based on review
changes in v2:
* dropped cpu-map
* dropped GIC_CPU_MASK_SIMPLE()
* Added new cpu compatible for kryo385
* added ITS node, marked as disabled
Rajendra Nayak (3):
dt-bindings: arm: Document kryo385 cpu
dt-bindings: qcom: Add SDM845 bindings
arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
Documentation/devicetree/bindings/arm/qcom.txt | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 15 ++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 276 +++++++++++++++++++++++++
5 files changed, 294 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 0/3] Add DTS for SDM845 SoC and MTP
Date: Mon, 12 Mar 2018 19:42:21 +0530 [thread overview]
Message-ID: <20180312141224.11907-1-rnayak@codeaurora.org> (raw)
These are basic device tree files needed to boot a SDM845 MTP
board to a ramfs based serial console shell
Bindings are based on whats proposed for pinctrl/serial/clock
drivers for SDM845 SoC
pinctrl: https://patchwork.kernel.org/patch/10157143/ (This is now pulled
in by Linus Walleij for 4.17)
clocks: https://lkml.org/lkml/2018/1/31/209 (under review)
I have dropped the patch that adds the serial/geni nodes from v6/7, as that
will be reposted along with the geni patch series by Karthik
Since 'PATCH 3/3' also adds an ITS node and keeps it disabled, we also depend
on https://lkml.org/lkml/2018/1/29/383
Andy, since we aren't adding anything new for clocks (gcc) and pinctrl,
do these look good to be pulled in for 4.17?
changes in v7:
* Dropped redistributor-stride and #redistributor-regions as suggested
by Marc Zyngier
changes in v6:
* added the missing power-domain-cells property for gcc as reported
by Doug Anderson
* Dropped the patch which added geni/serial nodes in dts. Karthik has
agreed to carry that patch along with his GENI series.
changes in v5:
* Removed all instances of IRQ_TYPE_NONE
changes in v4:
* pull config changes to uart pins
* License in device tree files is still GPL-2.0
changes in v3:
* split the pinmux/pinconf nodes across SoC/Board files
* Fixes for issues reported with 'make dtbs W=2'
* other minor fixes based on review
changes in v2:
* dropped cpu-map
* dropped GIC_CPU_MASK_SIMPLE()
* Added new cpu compatible for kryo385
* added ITS node, marked as disabled
Rajendra Nayak (3):
dt-bindings: arm: Document kryo385 cpu
dt-bindings: qcom: Add SDM845 bindings
arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
Documentation/devicetree/bindings/arm/qcom.txt | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 15 ++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 276 +++++++++++++++++++++++++
5 files changed, 294 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2018-03-12 14:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-12 14:12 Rajendra Nayak [this message]
2018-03-12 14:12 ` [PATCH v7 0/3] Add DTS for SDM845 SoC and MTP Rajendra Nayak
2018-03-12 14:12 ` [PATCH v7 1/3] dt-bindings: arm: Document kryo385 cpu Rajendra Nayak
2018-03-12 14:12 ` Rajendra Nayak
2018-03-20 17:29 ` Stephen Boyd
2018-03-20 17:29 ` Stephen Boyd
2018-03-20 17:29 ` Stephen Boyd
2018-03-12 14:12 ` [PATCH v7 2/3] dt-bindings: qcom: Add SDM845 bindings Rajendra Nayak
2018-03-12 14:12 ` Rajendra Nayak
2018-03-12 14:12 ` Rajendra Nayak
2018-03-20 17:30 ` Stephen Boyd
2018-03-20 17:30 ` Stephen Boyd
2018-03-20 17:30 ` Stephen Boyd
2018-03-12 14:12 ` [PATCH v7 3/3] arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP Rajendra Nayak
2018-03-12 14:12 ` Rajendra Nayak
2018-03-12 17:02 ` Stephen Boyd
2018-03-12 17:02 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180312141224.11907-1-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.