Re: Possible kernel bug in torvalds/linux/master

Re: Possible kernel bug in torvalds/linux/master

[Arnd Bergmann]

On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
<christophe.lyon@linaro.org> wrote:
> Hi Arnd,
>
> We have a Jenkins jobs that builds the kernel from torvalds/linux
> master branch mutli_v7 defconfig every day, using our last GCC release
> (7.2-2017-11), and boots a beaglebone-black board.
>
> Last week it started to fail, I first suspected a Lava problem, but
> the job now fails every time, and Remi Duraffort from the Lava team
> thinks it's really a kernel problem.
>
> Is this something you are interested in investigating? Or should we
> switch to another "less-edge" branch?
>
> The last successful run:
> https://ci.linaro.org/job/tcwg-buildapp/app=3Dlinux+multi_v7,label=3Dtcwg=
-x86_64-build,target=3Darm-linux-gnueabihf/75/
> The next one failed:
> https://ci.linaro.org/job/tcwg-buildapp/app=3Dlinux+multi_v7,label=3Dtcwg=
-x86_64-build,target=3Darm-linux-gnueabihf/76
>
> Build 75 was with this kernel commit:
> Merge branch 'for-4.16-fixes'
> 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
>
> Build 76 was with:
> Merge tag 'clk-fixes-for-linus'
> 3215b9d57a2c75c4305a3956ca303d7004485200

Hi Christophe,

This branch is certainly the right one to test, thanks for the report!
>From looking at the output above, it seems that the kernel no longer
boots at all, and fails to even print any messages. Between the
two runs, I see the following commits:

3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
303851e14a8f Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
76c0b6a36a12 Merge tag 'scsi-fixes' of
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
32d43cd391ba kvm/x86: fix icebp instruction handling
e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
68ef3bc31664 nfsd: remove blocked locks on client teardown
80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
2975d5de6428 RDMA/ucma: Check AF family prior resolving address
8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
5388a508479d infiniband: qplib_fp: fix pointer cast
42cea83f9524 IB/mlx5: Fix cleanup order on unload
0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port =
reuse
f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
freed memory
c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discov=
ery
318aaf34f117 scsi: libsas: defer ata device eh commands to libata
55c19eee3b47 clk: qcom: msm8916: Fix return value check in
qcom_apcs_msm8916_clk_probe()
9903e41ae1f5 clk: hisilicon: hi3660=EF=BC=9AFix potential NULL dereference =
in
hi3660_stub_clk_probe()
56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
04bf9ab3359f clk: fix determine rate error with pass-through clock
91584eb51b47 Merge branch 'clk-phase' into clk-fixes
bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
https://github.com/t-kristo/linux-pm into clk-fixes
a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
clk-fixes
957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
clk-fixes
99652a469df1 clk: migrate the count of orphaned clocks at init
7f95beea3608 clk: update cached phase to respect the fact when setting phas=
e
762790b75210 clk: ti: am43xx: add set-rate-parent support for display
clkctrl clock
c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
clkctrl clock
49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX5=
3
5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops

Out of these, All the interesting ones are clk related:

56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
04bf9ab3359f clk: fix determine rate error with pass-through clock
91584eb51b47 Merge branch 'clk-phase' into clk-fixes
bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
https://github.com/t-kristo/linux-pm into clk-fixes
99652a469df1 clk: migrate the count of orphaned clocks at init
7f95beea3608 clk: update cached phase to respect the fact when setting phas=
e
762790b75210 clk: ti: am43xx: add set-rate-parent support for display
clkctrl clock
c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
clkctrl clock
49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag

I've added the involved parties to Cc. We also see the same thing on
kernelci, where many OMAP based systems now fail to boot, with the
problem starting at the same commit:

https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-4=
31-gbcfc1f455466/

It's possible that this has already been debugged and a fix is being worked=
 on,
but I'm not aware of anything, since I have not followed my email
while travelling.

        Arnd

Possible kernel bug in torvalds/linux/master

[Arnd Bergmann]

On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
<christophe.lyon@linaro.org> wrote:
> Hi Arnd,
>
> We have a Jenkins jobs that builds the kernel from torvalds/linux
> master branch mutli_v7 defconfig every day, using our last GCC release
> (7.2-2017-11), and boots a beaglebone-black board.
>
> Last week it started to fail, I first suspected a Lava problem, but
> the job now fails every time, and Remi Duraffort from the Lava team
> thinks it's really a kernel problem.
>
> Is this something you are interested in investigating? Or should we
> switch to another "less-edge" branch?
>
> The last successful run:
> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
> The next one failed:
> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
>
> Build 75 was with this kernel commit:
> Merge branch 'for-4.16-fixes'
> 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
>
> Build 76 was with:
> Merge tag 'clk-fixes-for-linus'
> 3215b9d57a2c75c4305a3956ca303d7004485200

Hi Christophe,

This branch is certainly the right one to test, thanks for the report!
>From looking at the output above, it seems that the kernel no longer
boots at all, and fails to even print any messages. Between the
two runs, I see the following commits:

3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
303851e14a8f Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
76c0b6a36a12 Merge tag 'scsi-fixes' of
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
32d43cd391ba kvm/x86: fix icebp instruction handling
e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
68ef3bc31664 nfsd: remove blocked locks on client teardown
80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
2975d5de6428 RDMA/ucma: Check AF family prior resolving address
8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
5388a508479d infiniband: qplib_fp: fix pointer cast
42cea83f9524 IB/mlx5: Fix cleanup order on unload
0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
freed memory
c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
318aaf34f117 scsi: libsas: defer ata device eh commands to libata
55c19eee3b47 clk: qcom: msm8916: Fix return value check in
qcom_apcs_msm8916_clk_probe()
9903e41ae1f5 clk: hisilicon: hi3660?Fix potential NULL dereference in
hi3660_stub_clk_probe()
56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
04bf9ab3359f clk: fix determine rate error with pass-through clock
91584eb51b47 Merge branch 'clk-phase' into clk-fixes
bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
https://github.com/t-kristo/linux-pm into clk-fixes
a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
clk-fixes
957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
clk-fixes
99652a469df1 clk: migrate the count of orphaned clocks at init
7f95beea3608 clk: update cached phase to respect the fact when setting phase
762790b75210 clk: ti: am43xx: add set-rate-parent support for display
clkctrl clock
c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
clkctrl clock
49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops

Out of these, All the interesting ones are clk related:

56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
04bf9ab3359f clk: fix determine rate error with pass-through clock
91584eb51b47 Merge branch 'clk-phase' into clk-fixes
bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
https://github.com/t-kristo/linux-pm into clk-fixes
99652a469df1 clk: migrate the count of orphaned clocks at init
7f95beea3608 clk: update cached phase to respect the fact when setting phase
762790b75210 clk: ti: am43xx: add set-rate-parent support for display
clkctrl clock
c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
clkctrl clock
49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag

I've added the involved parties to Cc. We also see the same thing on
kernelci, where many OMAP based systems now fail to boot, with the
problem starting at the same commit:

https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/

It's possible that this has already been debugged and a fix is being worked on,
but I'm not aware of anything, since I have not followed my email
while travelling.

        Arnd

Re: Possible kernel bug in torvalds/linux/master

[Arnd Bergmann]

On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
<christophe.lyon@linaro.org> wrote:
> Hi Arnd,
>
> We have a Jenkins jobs that builds the kernel from torvalds/linux
> master branch mutli_v7 defconfig every day, using our last GCC release
> (7.2-2017-11), and boots a beaglebone-black board.
>
> Last week it started to fail, I first suspected a Lava problem, but
> the job now fails every time, and Remi Duraffort from the Lava team
> thinks it's really a kernel problem.
>
> Is this something you are interested in investigating? Or should we
> switch to another "less-edge" branch?
>
> The last successful run:
> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
> The next one failed:
> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
>
> Build 75 was with this kernel commit:
> Merge branch 'for-4.16-fixes'
> 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
>
> Build 76 was with:
> Merge tag 'clk-fixes-for-linus'
> 3215b9d57a2c75c4305a3956ca303d7004485200

Hi Christophe,

This branch is certainly the right one to test, thanks for the report!
From looking at the output above, it seems that the kernel no longer
boots at all, and fails to even print any messages. Between the
two runs, I see the following commits:

3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
303851e14a8f Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
76c0b6a36a12 Merge tag 'scsi-fixes' of
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
32d43cd391ba kvm/x86: fix icebp instruction handling
e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
68ef3bc31664 nfsd: remove blocked locks on client teardown
80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
2975d5de6428 RDMA/ucma: Check AF family prior resolving address
8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
5388a508479d infiniband: qplib_fp: fix pointer cast
42cea83f9524 IB/mlx5: Fix cleanup order on unload
0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
freed memory
c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
318aaf34f117 scsi: libsas: defer ata device eh commands to libata
55c19eee3b47 clk: qcom: msm8916: Fix return value check in
qcom_apcs_msm8916_clk_probe()
9903e41ae1f5 clk: hisilicon: hi3660：Fix potential NULL dereference in
hi3660_stub_clk_probe()
56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
04bf9ab3359f clk: fix determine rate error with pass-through clock
91584eb51b47 Merge branch 'clk-phase' into clk-fixes
bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
https://github.com/t-kristo/linux-pm into clk-fixes
a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
clk-fixes
957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
clk-fixes
99652a469df1 clk: migrate the count of orphaned clocks at init
7f95beea3608 clk: update cached phase to respect the fact when setting phase
762790b75210 clk: ti: am43xx: add set-rate-parent support for display
clkctrl clock
c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
clkctrl clock
49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops

Out of these, All the interesting ones are clk related:

56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
04bf9ab3359f clk: fix determine rate error with pass-through clock
91584eb51b47 Merge branch 'clk-phase' into clk-fixes
bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
https://github.com/t-kristo/linux-pm into clk-fixes
99652a469df1 clk: migrate the count of orphaned clocks at init
7f95beea3608 clk: update cached phase to respect the fact when setting phase
762790b75210 clk: ti: am43xx: add set-rate-parent support for display
clkctrl clock
c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
clkctrl clock
49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag

I've added the involved parties to Cc. We also see the same thing on
kernelci, where many OMAP based systems now fail to boot, with the
problem starting at the same commit:

https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/

It's possible that this has already been debugged and a fix is being worked on,
but I'm not aware of anything, since I have not followed my email
while travelling.

        Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: Possible kernel bug in torvalds/linux/master

[Tony Lindgren]

Hi,

* Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
> On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
> <christophe.lyon@linaro.org> wrote:
> > Hi Arnd,
> >
> > We have a Jenkins jobs that builds the kernel from torvalds/linux
> > master branch mutli_v7 defconfig every day, using our last GCC release
> > (7.2-2017-11), and boots a beaglebone-black board.
> >
> > Last week it started to fail, I first suspected a Lava problem, but
> > the job now fails every time, and Remi Duraffort from the Lava team
> > thinks it's really a kernel problem.
> >
> > Is this something you are interested in investigating? Or should we
> > switch to another "less-edge" branch?
> >
> > The last successful run:
> > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
> > The next one failed:
> > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
> >
> > Build 75 was with this kernel commit:
> > Merge branch 'for-4.16-fixes'
> > 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
> >
> > Build 76 was with:
> > Merge tag 'clk-fixes-for-linus'
> > 3215b9d57a2c75c4305a3956ca303d7004485200
> 
> Hi Christophe,
> 
> This branch is certainly the right one to test, thanks for the report!
> From looking at the output above, it seems that the kernel no longer
> boots at all, and fails to even print any messages. Between the
> two runs, I see the following commits:
> 
> 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
> 303851e14a8f Merge tag 'for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
> 76c0b6a36a12 Merge tag 'scsi-fixes' of
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
> 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
> 32d43cd391ba kvm/x86: fix icebp instruction handling
> e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
> 68ef3bc31664 nfsd: remove blocked locks on client teardown
> 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
> ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
> 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
> 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
> 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
> 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
> d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
> bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
> 5388a508479d infiniband: qplib_fp: fix pointer cast
> 42cea83f9524 IB/mlx5: Fix cleanup order on unload
> 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
> 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
> 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
> f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
> freed memory
> c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
> 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
> 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
> 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
> 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
> qcom_apcs_msm8916_clk_probe()
> 9903e41ae1f5 clk: hisilicon: hi3660：Fix potential NULL dereference in
> hi3660_stub_clk_probe()
> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> 04bf9ab3359f clk: fix determine rate error with pass-through clock
> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> https://github.com/t-kristo/linux-pm into clk-fixes
> a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
> clk-fixes
> 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
> clk-fixes
> 99652a469df1 clk: migrate the count of orphaned clocks at init
> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> clkctrl clock
> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> clkctrl clock
> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
> 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
> 
> Out of these, All the interesting ones are clk related:
> 
> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> 04bf9ab3359f clk: fix determine rate error with pass-through clock
> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> https://github.com/t-kristo/linux-pm into clk-fixes
> 99652a469df1 clk: migrate the count of orphaned clocks at init
> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> clkctrl clock
> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> clkctrl clock
> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> 
> I've added the involved parties to Cc. We also see the same thing on
> kernelci, where many OMAP based systems now fail to boot, with the
> problem starting at the same commit:
> 
> https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
> 
> It's possible that this has already been debugged and a fix is being worked on,
> but I'm not aware of anything, since I have not followed my email
> while travelling.

I've confirmed that omap2plus_defconfig boots on bbb while
multi_v7_defconfig fails to boot with the following:

l4_wkup_cm:clk:0010:0: failed to disable
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
pgd = 4b21228f
[fa30e054] *pgd=48211452(bad)
Internal error: : 1028 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
Hardware name: Generic AM33XX (Flattened Device Tree)
PC is at _update_sysc_cache+0x2c/0x88
LR is at _enable+0x19c/0x274
pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
sp : db0adea0  ip : 00000003  fp : 00000000
r10: c144997c  r9 : 00000157  r8 : 00000003
r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 80204019  DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
Stack: (0xdb0adea0 to 0xdb0ae000)
dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
[<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
[<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
[<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
[<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
[<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
[<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
[<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xdb0adfb0 to 0xdb0adff8)
dfa0:                                     00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)

Tero, it might be some timing related clock issue?

Regards,

Tony

Possible kernel bug in torvalds/linux/master

[Tony Lindgren]

Hi,

* Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
> On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
> <christophe.lyon@linaro.org> wrote:
> > Hi Arnd,
> >
> > We have a Jenkins jobs that builds the kernel from torvalds/linux
> > master branch mutli_v7 defconfig every day, using our last GCC release
> > (7.2-2017-11), and boots a beaglebone-black board.
> >
> > Last week it started to fail, I first suspected a Lava problem, but
> > the job now fails every time, and Remi Duraffort from the Lava team
> > thinks it's really a kernel problem.
> >
> > Is this something you are interested in investigating? Or should we
> > switch to another "less-edge" branch?
> >
> > The last successful run:
> > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
> > The next one failed:
> > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
> >
> > Build 75 was with this kernel commit:
> > Merge branch 'for-4.16-fixes'
> > 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
> >
> > Build 76 was with:
> > Merge tag 'clk-fixes-for-linus'
> > 3215b9d57a2c75c4305a3956ca303d7004485200
> 
> Hi Christophe,
> 
> This branch is certainly the right one to test, thanks for the report!
> From looking at the output above, it seems that the kernel no longer
> boots at all, and fails to even print any messages. Between the
> two runs, I see the following commits:
> 
> 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
> 303851e14a8f Merge tag 'for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
> 76c0b6a36a12 Merge tag 'scsi-fixes' of
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
> 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
> 32d43cd391ba kvm/x86: fix icebp instruction handling
> e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
> 68ef3bc31664 nfsd: remove blocked locks on client teardown
> 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
> ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
> 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
> 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
> 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
> 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
> d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
> bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
> 5388a508479d infiniband: qplib_fp: fix pointer cast
> 42cea83f9524 IB/mlx5: Fix cleanup order on unload
> 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
> 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
> 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
> f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
> freed memory
> c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
> 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
> 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
> 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
> 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
> qcom_apcs_msm8916_clk_probe()
> 9903e41ae1f5 clk: hisilicon: hi3660?Fix potential NULL dereference in
> hi3660_stub_clk_probe()
> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> 04bf9ab3359f clk: fix determine rate error with pass-through clock
> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> https://github.com/t-kristo/linux-pm into clk-fixes
> a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
> clk-fixes
> 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
> clk-fixes
> 99652a469df1 clk: migrate the count of orphaned clocks at init
> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> clkctrl clock
> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> clkctrl clock
> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
> 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
> 
> Out of these, All the interesting ones are clk related:
> 
> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> 04bf9ab3359f clk: fix determine rate error with pass-through clock
> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> https://github.com/t-kristo/linux-pm into clk-fixes
> 99652a469df1 clk: migrate the count of orphaned clocks at init
> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> clkctrl clock
> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> clkctrl clock
> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> 
> I've added the involved parties to Cc. We also see the same thing on
> kernelci, where many OMAP based systems now fail to boot, with the
> problem starting at the same commit:
> 
> https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
> 
> It's possible that this has already been debugged and a fix is being worked on,
> but I'm not aware of anything, since I have not followed my email
> while travelling.

I've confirmed that omap2plus_defconfig boots on bbb while
multi_v7_defconfig fails to boot with the following:

l4_wkup_cm:clk:0010:0: failed to disable
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
pgd = 4b21228f
[fa30e054] *pgd=48211452(bad)
Internal error: : 1028 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
Hardware name: Generic AM33XX (Flattened Device Tree)
PC is at _update_sysc_cache+0x2c/0x88
LR is at _enable+0x19c/0x274
pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
sp : db0adea0  ip : 00000003  fp : 00000000
r10: c144997c  r9 : 00000157  r8 : 00000003
r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 80204019  DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
Stack: (0xdb0adea0 to 0xdb0ae000)
dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
[<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
[<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
[<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
[<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
[<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
[<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
[<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xdb0adfb0 to 0xdb0adff8)
dfa0:                                     00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)

Tero, it might be some timing related clock issue?

Regards,

Tony

Re: Possible kernel bug in torvalds/linux/master

[Tony Lindgren]

Hi,

* Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
> On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
> <christophe.lyon@linaro.org> wrote:
> > Hi Arnd,
> >
> > We have a Jenkins jobs that builds the kernel from torvalds/linux
> > master branch mutli_v7 defconfig every day, using our last GCC release
> > (7.2-2017-11), and boots a beaglebone-black board.
> >
> > Last week it started to fail, I first suspected a Lava problem, but
> > the job now fails every time, and Remi Duraffort from the Lava team
> > thinks it's really a kernel problem.
> >
> > Is this something you are interested in investigating? Or should we
> > switch to another "less-edge" branch?
> >
> > The last successful run:
> > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
> > The next one failed:
> > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
> >
> > Build 75 was with this kernel commit:
> > Merge branch 'for-4.16-fixes'
> > 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
> >
> > Build 76 was with:
> > Merge tag 'clk-fixes-for-linus'
> > 3215b9d57a2c75c4305a3956ca303d7004485200
> 
> Hi Christophe,
> 
> This branch is certainly the right one to test, thanks for the report!
> From looking at the output above, it seems that the kernel no longer
> boots at all, and fails to even print any messages. Between the
> two runs, I see the following commits:
> 
> 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
> 303851e14a8f Merge tag 'for-linus' of
> git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
> 76c0b6a36a12 Merge tag 'scsi-fixes' of
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
> 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
> 32d43cd391ba kvm/x86: fix icebp instruction handling
> e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
> 68ef3bc31664 nfsd: remove blocked locks on client teardown
> 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
> ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
> 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
> 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
> 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
> 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
> d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
> bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
> 5388a508479d infiniband: qplib_fp: fix pointer cast
> 42cea83f9524 IB/mlx5: Fix cleanup order on unload
> 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
> 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
> 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
> f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
> freed memory
> c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
> 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
> 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
> 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
> 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
> qcom_apcs_msm8916_clk_probe()
> 9903e41ae1f5 clk: hisilicon: hi3660：Fix potential NULL dereference in
> hi3660_stub_clk_probe()
> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> 04bf9ab3359f clk: fix determine rate error with pass-through clock
> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> https://github.com/t-kristo/linux-pm into clk-fixes
> a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
> clk-fixes
> 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
> clk-fixes
> 99652a469df1 clk: migrate the count of orphaned clocks at init
> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> clkctrl clock
> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> clkctrl clock
> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
> 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
> 
> Out of these, All the interesting ones are clk related:
> 
> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> 04bf9ab3359f clk: fix determine rate error with pass-through clock
> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> https://github.com/t-kristo/linux-pm into clk-fixes
> 99652a469df1 clk: migrate the count of orphaned clocks at init
> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> clkctrl clock
> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> clkctrl clock
> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> 
> I've added the involved parties to Cc. We also see the same thing on
> kernelci, where many OMAP based systems now fail to boot, with the
> problem starting at the same commit:
> 
> https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
> 
> It's possible that this has already been debugged and a fix is being worked on,
> but I'm not aware of anything, since I have not followed my email
> while travelling.

I've confirmed that omap2plus_defconfig boots on bbb while
multi_v7_defconfig fails to boot with the following:

l4_wkup_cm:clk:0010:0: failed to disable
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
pgd = 4b21228f
[fa30e054] *pgd=48211452(bad)
Internal error: : 1028 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
Hardware name: Generic AM33XX (Flattened Device Tree)
PC is at _update_sysc_cache+0x2c/0x88
LR is at _enable+0x19c/0x274
pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
sp : db0adea0  ip : 00000003  fp : 00000000
r10: c144997c  r9 : 00000157  r8 : 00000003
r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 80204019  DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
Stack: (0xdb0adea0 to 0xdb0ae000)
dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
[<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
[<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
[<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
[<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
[<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
[<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
[<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xdb0adfb0 to 0xdb0adff8)
dfa0:                                     00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)

Tero, it might be some timing related clock issue?

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: Possible kernel bug in torvalds/linux/master

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [180325 15:20]:
> Hi,
> 
> * Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
> > On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
> > <christophe.lyon@linaro.org> wrote:
> > > Hi Arnd,
> > >
> > > We have a Jenkins jobs that builds the kernel from torvalds/linux
> > > master branch mutli_v7 defconfig every day, using our last GCC release
> > > (7.2-2017-11), and boots a beaglebone-black board.
> > >
> > > Last week it started to fail, I first suspected a Lava problem, but
> > > the job now fails every time, and Remi Duraffort from the Lava team
> > > thinks it's really a kernel problem.
> > >
> > > Is this something you are interested in investigating? Or should we
> > > switch to another "less-edge" branch?
> > >
> > > The last successful run:
> > > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
> > > The next one failed:
> > > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
> > >
> > > Build 75 was with this kernel commit:
> > > Merge branch 'for-4.16-fixes'
> > > 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
> > >
> > > Build 76 was with:
> > > Merge tag 'clk-fixes-for-linus'
> > > 3215b9d57a2c75c4305a3956ca303d7004485200
> > 
> > Hi Christophe,
> > 
> > This branch is certainly the right one to test, thanks for the report!
> > From looking at the output above, it seems that the kernel no longer
> > boots at all, and fails to even print any messages. Between the
> > two runs, I see the following commits:
> > 
> > 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
> > 303851e14a8f Merge tag 'for-linus' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
> > 76c0b6a36a12 Merge tag 'scsi-fixes' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
> > 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
> > 32d43cd391ba kvm/x86: fix icebp instruction handling
> > e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
> > 68ef3bc31664 nfsd: remove blocked locks on client teardown
> > 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
> > ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
> > 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
> > 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
> > 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
> > 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
> > d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
> > bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
> > 5388a508479d infiniband: qplib_fp: fix pointer cast
> > 42cea83f9524 IB/mlx5: Fix cleanup order on unload
> > 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
> > 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
> > 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
> > f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
> > freed memory
> > c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
> > 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
> > 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
> > 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
> > 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
> > qcom_apcs_msm8916_clk_probe()
> > 9903e41ae1f5 clk: hisilicon: hi3660：Fix potential NULL dereference in
> > hi3660_stub_clk_probe()
> > 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> > 04bf9ab3359f clk: fix determine rate error with pass-through clock
> > 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> > bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> > https://github.com/t-kristo/linux-pm into clk-fixes
> > a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
> > clk-fixes
> > 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
> > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
> > clk-fixes
> > 99652a469df1 clk: migrate the count of orphaned clocks at init
> > 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> > 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> > clkctrl clock
> > c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> > clkctrl clock
> > 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> > a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
> > 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
> > 
> > Out of these, All the interesting ones are clk related:
> > 
> > 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> > 04bf9ab3359f clk: fix determine rate error with pass-through clock
> > 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> > bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> > https://github.com/t-kristo/linux-pm into clk-fixes
> > 99652a469df1 clk: migrate the count of orphaned clocks at init
> > 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> > 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> > clkctrl clock
> > c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> > clkctrl clock
> > 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> > 
> > I've added the involved parties to Cc. We also see the same thing on
> > kernelci, where many OMAP based systems now fail to boot, with the
> > problem starting at the same commit:
> > 
> > https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
> > 
> > It's possible that this has already been debugged and a fix is being worked on,
> > but I'm not aware of anything, since I have not followed my email
> > while travelling.
> 
> I've confirmed that omap2plus_defconfig boots on bbb while
> multi_v7_defconfig fails to boot with the following:
> 
> l4_wkup_cm:clk:0010:0: failed to disable
> Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
> pgd = 4b21228f
> [fa30e054] *pgd=48211452(bad)
> Internal error: : 1028 [#1] SMP ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
> Hardware name: Generic AM33XX (Flattened Device Tree)
> PC is at _update_sysc_cache+0x2c/0x88
> LR is at _enable+0x19c/0x274
> pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
> sp : db0adea0  ip : 00000003  fp : 00000000
> r10: c144997c  r9 : 00000157  r8 : 00000003
> r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
> r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
> Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
> Control: 10c5387d  Table: 80204019  DAC: 00000051
> Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
> Stack: (0xdb0adea0 to 0xdb0ae000)
> dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
> dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
> dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
> df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
> df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
> df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
> df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
> df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
> dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
> [<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
> [<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
> [<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
> [<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
> [<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
> [<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
> [<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> Exception stack(0xdb0adfb0 to 0xdb0adff8)
> dfa0:                                     00000000 00000000 00000000 00000000
> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)
> 
> Tero, it might be some timing related clock issue?

Looks like git bisect points to commit c083dc5f3738 ("clk: ti: am33xx:
add set-rate-parent support for display clkctrl clock"). I also verified
reverting it makes bbb boot again.

Regards,

Tony

Possible kernel bug in torvalds/linux/master

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [180325 15:20]:
> Hi,
> 
> * Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
> > On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
> > <christophe.lyon@linaro.org> wrote:
> > > Hi Arnd,
> > >
> > > We have a Jenkins jobs that builds the kernel from torvalds/linux
> > > master branch mutli_v7 defconfig every day, using our last GCC release
> > > (7.2-2017-11), and boots a beaglebone-black board.
> > >
> > > Last week it started to fail, I first suspected a Lava problem, but
> > > the job now fails every time, and Remi Duraffort from the Lava team
> > > thinks it's really a kernel problem.
> > >
> > > Is this something you are interested in investigating? Or should we
> > > switch to another "less-edge" branch?
> > >
> > > The last successful run:
> > > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
> > > The next one failed:
> > > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
> > >
> > > Build 75 was with this kernel commit:
> > > Merge branch 'for-4.16-fixes'
> > > 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
> > >
> > > Build 76 was with:
> > > Merge tag 'clk-fixes-for-linus'
> > > 3215b9d57a2c75c4305a3956ca303d7004485200
> > 
> > Hi Christophe,
> > 
> > This branch is certainly the right one to test, thanks for the report!
> > From looking at the output above, it seems that the kernel no longer
> > boots at all, and fails to even print any messages. Between the
> > two runs, I see the following commits:
> > 
> > 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
> > 303851e14a8f Merge tag 'for-linus' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
> > 76c0b6a36a12 Merge tag 'scsi-fixes' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
> > 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
> > 32d43cd391ba kvm/x86: fix icebp instruction handling
> > e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
> > 68ef3bc31664 nfsd: remove blocked locks on client teardown
> > 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
> > ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
> > 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
> > 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
> > 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
> > 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
> > d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
> > bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
> > 5388a508479d infiniband: qplib_fp: fix pointer cast
> > 42cea83f9524 IB/mlx5: Fix cleanup order on unload
> > 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
> > 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
> > 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
> > f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
> > freed memory
> > c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
> > 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
> > 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
> > 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
> > 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
> > qcom_apcs_msm8916_clk_probe()
> > 9903e41ae1f5 clk: hisilicon: hi3660?Fix potential NULL dereference in
> > hi3660_stub_clk_probe()
> > 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> > 04bf9ab3359f clk: fix determine rate error with pass-through clock
> > 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> > bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> > https://github.com/t-kristo/linux-pm into clk-fixes
> > a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
> > clk-fixes
> > 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
> > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
> > clk-fixes
> > 99652a469df1 clk: migrate the count of orphaned clocks at init
> > 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> > 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> > clkctrl clock
> > c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> > clkctrl clock
> > 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> > a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
> > 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
> > 
> > Out of these, All the interesting ones are clk related:
> > 
> > 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> > 04bf9ab3359f clk: fix determine rate error with pass-through clock
> > 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> > bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> > https://github.com/t-kristo/linux-pm into clk-fixes
> > 99652a469df1 clk: migrate the count of orphaned clocks at init
> > 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> > 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> > clkctrl clock
> > c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> > clkctrl clock
> > 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> > 
> > I've added the involved parties to Cc. We also see the same thing on
> > kernelci, where many OMAP based systems now fail to boot, with the
> > problem starting at the same commit:
> > 
> > https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
> > 
> > It's possible that this has already been debugged and a fix is being worked on,
> > but I'm not aware of anything, since I have not followed my email
> > while travelling.
> 
> I've confirmed that omap2plus_defconfig boots on bbb while
> multi_v7_defconfig fails to boot with the following:
> 
> l4_wkup_cm:clk:0010:0: failed to disable
> Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
> pgd = 4b21228f
> [fa30e054] *pgd=48211452(bad)
> Internal error: : 1028 [#1] SMP ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
> Hardware name: Generic AM33XX (Flattened Device Tree)
> PC is at _update_sysc_cache+0x2c/0x88
> LR is at _enable+0x19c/0x274
> pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
> sp : db0adea0  ip : 00000003  fp : 00000000
> r10: c144997c  r9 : 00000157  r8 : 00000003
> r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
> r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
> Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
> Control: 10c5387d  Table: 80204019  DAC: 00000051
> Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
> Stack: (0xdb0adea0 to 0xdb0ae000)
> dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
> dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
> dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
> df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
> df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
> df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
> df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
> df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
> dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
> [<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
> [<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
> [<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
> [<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
> [<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
> [<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
> [<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> Exception stack(0xdb0adfb0 to 0xdb0adff8)
> dfa0:                                     00000000 00000000 00000000 00000000
> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)
> 
> Tero, it might be some timing related clock issue?

Looks like git bisect points to commit c083dc5f3738 ("clk: ti: am33xx:
add set-rate-parent support for display clkctrl clock"). I also verified
reverting it makes bbb boot again.

Regards,

Tony

Re: Possible kernel bug in torvalds/linux/master

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [180325 15:20]:
> Hi,
> 
> * Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
> > On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
> > <christophe.lyon@linaro.org> wrote:
> > > Hi Arnd,
> > >
> > > We have a Jenkins jobs that builds the kernel from torvalds/linux
> > > master branch mutli_v7 defconfig every day, using our last GCC release
> > > (7.2-2017-11), and boots a beaglebone-black board.
> > >
> > > Last week it started to fail, I first suspected a Lava problem, but
> > > the job now fails every time, and Remi Duraffort from the Lava team
> > > thinks it's really a kernel problem.
> > >
> > > Is this something you are interested in investigating? Or should we
> > > switch to another "less-edge" branch?
> > >
> > > The last successful run:
> > > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
> > > The next one failed:
> > > https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
> > >
> > > Build 75 was with this kernel commit:
> > > Merge branch 'for-4.16-fixes'
> > > 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
> > >
> > > Build 76 was with:
> > > Merge tag 'clk-fixes-for-linus'
> > > 3215b9d57a2c75c4305a3956ca303d7004485200
> > 
> > Hi Christophe,
> > 
> > This branch is certainly the right one to test, thanks for the report!
> > From looking at the output above, it seems that the kernel no longer
> > boots at all, and fails to even print any messages. Between the
> > two runs, I see the following commits:
> > 
> > 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
> > 303851e14a8f Merge tag 'for-linus' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
> > 76c0b6a36a12 Merge tag 'scsi-fixes' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
> > 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
> > 32d43cd391ba kvm/x86: fix icebp instruction handling
> > e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
> > 68ef3bc31664 nfsd: remove blocked locks on client teardown
> > 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
> > ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
> > 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
> > 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
> > 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
> > 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
> > d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
> > bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
> > 5388a508479d infiniband: qplib_fp: fix pointer cast
> > 42cea83f9524 IB/mlx5: Fix cleanup order on unload
> > 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
> > 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
> > 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
> > f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
> > freed memory
> > c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
> > 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
> > 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
> > 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
> > 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
> > qcom_apcs_msm8916_clk_probe()
> > 9903e41ae1f5 clk: hisilicon: hi3660：Fix potential NULL dereference in
> > hi3660_stub_clk_probe()
> > 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> > 04bf9ab3359f clk: fix determine rate error with pass-through clock
> > 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> > bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> > https://github.com/t-kristo/linux-pm into clk-fixes
> > a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
> > clk-fixes
> > 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
> > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
> > clk-fixes
> > 99652a469df1 clk: migrate the count of orphaned clocks at init
> > 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> > 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> > clkctrl clock
> > c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> > clkctrl clock
> > 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> > a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
> > 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
> > 
> > Out of these, All the interesting ones are clk related:
> > 
> > 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
> > 04bf9ab3359f clk: fix determine rate error with pass-through clock
> > 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
> > bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
> > https://github.com/t-kristo/linux-pm into clk-fixes
> > 99652a469df1 clk: migrate the count of orphaned clocks at init
> > 7f95beea3608 clk: update cached phase to respect the fact when setting phase
> > 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
> > clkctrl clock
> > c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
> > clkctrl clock
> > 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
> > 
> > I've added the involved parties to Cc. We also see the same thing on
> > kernelci, where many OMAP based systems now fail to boot, with the
> > problem starting at the same commit:
> > 
> > https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
> > 
> > It's possible that this has already been debugged and a fix is being worked on,
> > but I'm not aware of anything, since I have not followed my email
> > while travelling.
> 
> I've confirmed that omap2plus_defconfig boots on bbb while
> multi_v7_defconfig fails to boot with the following:
> 
> l4_wkup_cm:clk:0010:0: failed to disable
> Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
> pgd = 4b21228f
> [fa30e054] *pgd=48211452(bad)
> Internal error: : 1028 [#1] SMP ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
> Hardware name: Generic AM33XX (Flattened Device Tree)
> PC is at _update_sysc_cache+0x2c/0x88
> LR is at _enable+0x19c/0x274
> pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
> sp : db0adea0  ip : 00000003  fp : 00000000
> r10: c144997c  r9 : 00000157  r8 : 00000003
> r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
> r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
> Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
> Control: 10c5387d  Table: 80204019  DAC: 00000051
> Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
> Stack: (0xdb0adea0 to 0xdb0ae000)
> dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
> dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
> dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
> df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
> df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
> df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
> df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
> df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
> dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
> [<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
> [<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
> [<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
> [<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
> [<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
> [<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
> [<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> Exception stack(0xdb0adfb0 to 0xdb0adff8)
> dfa0:                                     00000000 00000000 00000000 00000000
> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)
> 
> Tero, it might be some timing related clock issue?

Looks like git bisect points to commit c083dc5f3738 ("clk: ti: am33xx:
add set-rate-parent support for display clkctrl clock"). I also verified
reverting it makes bbb boot again.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: Possible kernel bug in torvalds/linux/master

[Tero Kristo]

On 25/03/18 18:39, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [180325 15:20]:
>> Hi,
>>
>> * Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
>>> On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
>>> <christophe.lyon@linaro.org> wrote:
>>>> Hi Arnd,
>>>>
>>>> We have a Jenkins jobs that builds the kernel from torvalds/linux
>>>> master branch mutli_v7 defconfig every day, using our last GCC release
>>>> (7.2-2017-11), and boots a beaglebone-black board.
>>>>
>>>> Last week it started to fail, I first suspected a Lava problem, but
>>>> the job now fails every time, and Remi Duraffort from the Lava team
>>>> thinks it's really a kernel problem.
>>>>
>>>> Is this something you are interested in investigating? Or should we
>>>> switch to another "less-edge" branch?
>>>>
>>>> The last successful run:
>>>> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
>>>> The next one failed:
>>>> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
>>>>
>>>> Build 75 was with this kernel commit:
>>>> Merge branch 'for-4.16-fixes'
>>>> 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
>>>>
>>>> Build 76 was with:
>>>> Merge tag 'clk-fixes-for-linus'
>>>> 3215b9d57a2c75c4305a3956ca303d7004485200
>>>
>>> Hi Christophe,
>>>
>>> This branch is certainly the right one to test, thanks for the report!
>>>  From looking at the output above, it seems that the kernel no longer
>>> boots at all, and fails to even print any messages. Between the
>>> two runs, I see the following commits:
>>>
>>> 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
>>> 303851e14a8f Merge tag 'for-linus' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
>>> 76c0b6a36a12 Merge tag 'scsi-fixes' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
>>> 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
>>> 32d43cd391ba kvm/x86: fix icebp instruction handling
>>> e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
>>> 68ef3bc31664 nfsd: remove blocked locks on client teardown
>>> 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
>>> ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
>>> 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
>>> 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
>>> 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
>>> 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
>>> d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
>>> bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
>>> 5388a508479d infiniband: qplib_fp: fix pointer cast
>>> 42cea83f9524 IB/mlx5: Fix cleanup order on unload
>>> 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
>>> 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
>>> 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
>>> f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
>>> freed memory
>>> c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
>>> 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
>>> 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
>>> 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
>>> 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
>>> qcom_apcs_msm8916_clk_probe()
>>> 9903e41ae1f5 clk: hisilicon: hi3660：Fix potential NULL dereference in
>>> hi3660_stub_clk_probe()
>>> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
>>> 04bf9ab3359f clk: fix determine rate error with pass-through clock
>>> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
>>> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
>>> https://github.com/t-kristo/linux-pm into clk-fixes
>>> a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
>>> clk-fixes
>>> 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
>>> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
>>> clk-fixes
>>> 99652a469df1 clk: migrate the count of orphaned clocks at init
>>> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
>>> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
>>> clkctrl clock
>>> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
>>> clkctrl clock
>>> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
>>> a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
>>> 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
>>>
>>> Out of these, All the interesting ones are clk related:
>>>
>>> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
>>> 04bf9ab3359f clk: fix determine rate error with pass-through clock
>>> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
>>> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
>>> https://github.com/t-kristo/linux-pm into clk-fixes
>>> 99652a469df1 clk: migrate the count of orphaned clocks at init
>>> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
>>> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
>>> clkctrl clock
>>> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
>>> clkctrl clock
>>> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
>>>
>>> I've added the involved parties to Cc. We also see the same thing on
>>> kernelci, where many OMAP based systems now fail to boot, with the
>>> problem starting at the same commit:
>>>
>>> https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
>>>
>>> It's possible that this has already been debugged and a fix is being worked on,
>>> but I'm not aware of anything, since I have not followed my email
>>> while travelling.
>>
>> I've confirmed that omap2plus_defconfig boots on bbb while
>> multi_v7_defconfig fails to boot with the following:
>>
>> l4_wkup_cm:clk:0010:0: failed to disable
>> Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
>> pgd = 4b21228f
>> [fa30e054] *pgd=48211452(bad)
>> Internal error: : 1028 [#1] SMP ARM
>> Modules linked in:
>> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
>> Hardware name: Generic AM33XX (Flattened Device Tree)
>> PC is at _update_sysc_cache+0x2c/0x88
>> LR is at _enable+0x19c/0x274
>> pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
>> sp : db0adea0  ip : 00000003  fp : 00000000
>> r10: c144997c  r9 : 00000157  r8 : 00000003
>> r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
>> r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
>> Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
>> Control: 10c5387d  Table: 80204019  DAC: 00000051
>> Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
>> Stack: (0xdb0adea0 to 0xdb0ae000)
>> dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
>> dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
>> dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
>> df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
>> df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
>> df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
>> df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
>> df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
>> dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
>> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
>> [<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
>> [<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
>> [<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
>> [<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
>> [<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
>> [<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
>> [<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
>> Exception stack(0xdb0adfb0 to 0xdb0adff8)
>> dfa0:                                     00000000 00000000 00000000 00000000
>> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
>> Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)
>>
>> Tero, it might be some timing related clock issue?
> 
> Looks like git bisect points to commit c083dc5f3738 ("clk: ti: am33xx:
> add set-rate-parent support for display clkctrl clock"). I also verified
> reverting it makes bbb boot again.

Ok managed to do some debugging for this today, and fixed it.

The root cause for this is a config flag overlap, and it was introduced 
as a side effect of the mentioned patch for am33xx. Same issue is 
present for am43xx. The exact bug is that when I introduced the 
set-rate-parent feature, I re-used a generic clock flag but this also 
masked a check whether an IP is ready to be accessed yet or not. The bug 
only impacts the DSS clocks for the mentioned platforms but is enough to 
make it fail boot with multi_v7 config. The problem is not visible in 
omap2plus build, as it has number of debug features enabled, making the 
code execute just that small bit slower and it doesn't need the extra 
check for the IP at all.

I'll post the fix in a separate patch email in a minute.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Possible kernel bug in torvalds/linux/master

[Tero Kristo]

On 25/03/18 18:39, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [180325 15:20]:
>> Hi,
>>
>> * Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
>>> On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
>>> <christophe.lyon@linaro.org> wrote:
>>>> Hi Arnd,
>>>>
>>>> We have a Jenkins jobs that builds the kernel from torvalds/linux
>>>> master branch mutli_v7 defconfig every day, using our last GCC release
>>>> (7.2-2017-11), and boots a beaglebone-black board.
>>>>
>>>> Last week it started to fail, I first suspected a Lava problem, but
>>>> the job now fails every time, and Remi Duraffort from the Lava team
>>>> thinks it's really a kernel problem.
>>>>
>>>> Is this something you are interested in investigating? Or should we
>>>> switch to another "less-edge" branch?
>>>>
>>>> The last successful run:
>>>> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
>>>> The next one failed:
>>>> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
>>>>
>>>> Build 75 was with this kernel commit:
>>>> Merge branch 'for-4.16-fixes'
>>>> 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
>>>>
>>>> Build 76 was with:
>>>> Merge tag 'clk-fixes-for-linus'
>>>> 3215b9d57a2c75c4305a3956ca303d7004485200
>>>
>>> Hi Christophe,
>>>
>>> This branch is certainly the right one to test, thanks for the report!
>>>  From looking at the output above, it seems that the kernel no longer
>>> boots at all, and fails to even print any messages. Between the
>>> two runs, I see the following commits:
>>>
>>> 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
>>> 303851e14a8f Merge tag 'for-linus' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
>>> 76c0b6a36a12 Merge tag 'scsi-fixes' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
>>> 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
>>> 32d43cd391ba kvm/x86: fix icebp instruction handling
>>> e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
>>> 68ef3bc31664 nfsd: remove blocked locks on client teardown
>>> 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
>>> ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
>>> 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
>>> 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
>>> 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
>>> 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
>>> d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
>>> bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
>>> 5388a508479d infiniband: qplib_fp: fix pointer cast
>>> 42cea83f9524 IB/mlx5: Fix cleanup order on unload
>>> 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
>>> 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
>>> 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
>>> f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
>>> freed memory
>>> c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
>>> 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
>>> 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
>>> 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
>>> 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
>>> qcom_apcs_msm8916_clk_probe()
>>> 9903e41ae1f5 clk: hisilicon: hi3660?Fix potential NULL dereference in
>>> hi3660_stub_clk_probe()
>>> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
>>> 04bf9ab3359f clk: fix determine rate error with pass-through clock
>>> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
>>> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
>>> https://github.com/t-kristo/linux-pm into clk-fixes
>>> a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
>>> clk-fixes
>>> 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
>>> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
>>> clk-fixes
>>> 99652a469df1 clk: migrate the count of orphaned clocks at init
>>> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
>>> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
>>> clkctrl clock
>>> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
>>> clkctrl clock
>>> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
>>> a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
>>> 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
>>>
>>> Out of these, All the interesting ones are clk related:
>>>
>>> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
>>> 04bf9ab3359f clk: fix determine rate error with pass-through clock
>>> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
>>> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
>>> https://github.com/t-kristo/linux-pm into clk-fixes
>>> 99652a469df1 clk: migrate the count of orphaned clocks at init
>>> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
>>> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
>>> clkctrl clock
>>> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
>>> clkctrl clock
>>> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
>>>
>>> I've added the involved parties to Cc. We also see the same thing on
>>> kernelci, where many OMAP based systems now fail to boot, with the
>>> problem starting at the same commit:
>>>
>>> https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
>>>
>>> It's possible that this has already been debugged and a fix is being worked on,
>>> but I'm not aware of anything, since I have not followed my email
>>> while travelling.
>>
>> I've confirmed that omap2plus_defconfig boots on bbb while
>> multi_v7_defconfig fails to boot with the following:
>>
>> l4_wkup_cm:clk:0010:0: failed to disable
>> Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
>> pgd = 4b21228f
>> [fa30e054] *pgd=48211452(bad)
>> Internal error: : 1028 [#1] SMP ARM
>> Modules linked in:
>> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
>> Hardware name: Generic AM33XX (Flattened Device Tree)
>> PC is at _update_sysc_cache+0x2c/0x88
>> LR is at _enable+0x19c/0x274
>> pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
>> sp : db0adea0  ip : 00000003  fp : 00000000
>> r10: c144997c  r9 : 00000157  r8 : 00000003
>> r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
>> r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
>> Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
>> Control: 10c5387d  Table: 80204019  DAC: 00000051
>> Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
>> Stack: (0xdb0adea0 to 0xdb0ae000)
>> dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
>> dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
>> dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
>> df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
>> df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
>> df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
>> df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
>> df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
>> dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
>> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
>> [<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
>> [<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
>> [<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
>> [<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
>> [<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
>> [<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
>> [<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
>> Exception stack(0xdb0adfb0 to 0xdb0adff8)
>> dfa0:                                     00000000 00000000 00000000 00000000
>> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
>> Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)
>>
>> Tero, it might be some timing related clock issue?
> 
> Looks like git bisect points to commit c083dc5f3738 ("clk: ti: am33xx:
> add set-rate-parent support for display clkctrl clock"). I also verified
> reverting it makes bbb boot again.

Ok managed to do some debugging for this today, and fixed it.

The root cause for this is a config flag overlap, and it was introduced 
as a side effect of the mentioned patch for am33xx. Same issue is 
present for am43xx. The exact bug is that when I introduced the 
set-rate-parent feature, I re-used a generic clock flag but this also 
masked a check whether an IP is ready to be accessed yet or not. The bug 
only impacts the DSS clocks for the mentioned platforms but is enough to 
make it fail boot with multi_v7 config. The problem is not visible in 
omap2plus build, as it has number of debug features enabled, making the 
code execute just that small bit slower and it doesn't need the extra 
check for the IP at all.

I'll post the fix in a separate patch email in a minute.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: Possible kernel bug in torvalds/linux/master

[Tero Kristo]

On 25/03/18 18:39, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [180325 15:20]:
>> Hi,
>>
>> * Arnd Bergmann <arnd@arndb.de> [180325 13:30]:
>>> On Sun, Mar 25, 2018 at 3:03 PM, Christophe Lyon
>>> <christophe.lyon@linaro.org> wrote:
>>>> Hi Arnd,
>>>>
>>>> We have a Jenkins jobs that builds the kernel from torvalds/linux
>>>> master branch mutli_v7 defconfig every day, using our last GCC release
>>>> (7.2-2017-11), and boots a beaglebone-black board.
>>>>
>>>> Last week it started to fail, I first suspected a Lava problem, but
>>>> the job now fails every time, and Remi Duraffort from the Lava team
>>>> thinks it's really a kernel problem.
>>>>
>>>> Is this something you are interested in investigating? Or should we
>>>> switch to another "less-edge" branch?
>>>>
>>>> The last successful run:
>>>> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/75/
>>>> The next one failed:
>>>> https://ci.linaro.org/job/tcwg-buildapp/app=linux+multi_v7,label=tcwg-x86_64-build,target=arm-linux-gnueabihf/76
>>>>
>>>> Build 75 was with this kernel commit:
>>>> Merge branch 'for-4.16-fixes'
>>>> 1b5f3ba415fe4cf8b8b39c8d104ed44cde330658
>>>>
>>>> Build 76 was with:
>>>> Merge tag 'clk-fixes-for-linus'
>>>> 3215b9d57a2c75c4305a3956ca303d7004485200
>>>
>>> Hi Christophe,
>>>
>>> This branch is certainly the right one to test, thanks for the report!
>>>  From looking at the output above, it seems that the kernel no longer
>>> boots at all, and fails to even print any messages. Between the
>>> two runs, I see the following commits:
>>>
>>> 3215b9d57a2c Merge tag 'clk-fixes-for-linus' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
>>> 303851e14a8f Merge tag 'for-linus' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
>>> 76c0b6a36a12 Merge tag 'scsi-fixes' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
>>> 645102eac15e Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
>>> 32d43cd391ba kvm/x86: fix icebp instruction handling
>>> e8980d67d601 RDMA/ucma: Ensure that CM_ID exists prior to access it
>>> 68ef3bc31664 nfsd: remove blocked locks on client teardown
>>> 80cf79ae4f68 RDMA/verbs: Remove restrack entry from XRCD structure
>>> ed65a4dc2208 RDMA/ucma: Fix use-after-free access in ucma_close
>>> 7997f3b2df75 clk: bcm2835: Protect sections updating shared registers
>>> 49012d1bf5f7 clk: bcm2835: Fix ana->maskX definitions
>>> 2975d5de6428 RDMA/ucma: Check AF family prior resolving address
>>> 8a53fc511c5e clk: aspeed: Prevent reset if clock is enabled
>>> d90c76bb6112 clk: aspeed: Fix is_enabled for certain clocks
>>> bd8602ca42f6 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
>>> 5388a508479d infiniband: qplib_fp: fix pointer cast
>>> 42cea83f9524 IB/mlx5: Fix cleanup order on unload
>>> 0c81ffc60d52 RDMA/ucma: Don't allow join attempts for unsupported AF family
>>> 7688f2c3bbf5 RDMA/ucma: Fix access to non-initialized CM_ID object
>>> 9dea9a2ff61c RDMA/core: Do not use invalid destination in determining port reuse
>>> f3f134f5260a RDMA/mlx5: Fix crash while accessing garbage pointer and
>>> freed memory
>>> c2b37f76485f IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
>>> 2c292dbb398e IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
>>> 14bc1dff7427 scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
>>> 318aaf34f117 scsi: libsas: defer ata device eh commands to libata
>>> 55c19eee3b47 clk: qcom: msm8916: Fix return value check in
>>> qcom_apcs_msm8916_clk_probe()
>>> 9903e41ae1f5 clk: hisilicon: hi3660：Fix potential NULL dereference in
>>> hi3660_stub_clk_probe()
>>> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
>>> 04bf9ab3359f clk: fix determine rate error with pass-through clock
>>> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
>>> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
>>> https://github.com/t-kristo/linux-pm into clk-fixes
>>> a88bb86d58ce Merge tag 'clk-imx-fixes-4.16' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into
>>> clk-fixes
>>> 957a42e8599a Merge tag 'sunxi-clk-fixes-for-4.16' of
>>> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
>>> clk-fixes
>>> 99652a469df1 clk: migrate the count of orphaned clocks at init
>>> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
>>> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
>>> clkctrl clock
>>> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
>>> clkctrl clock
>>> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
>>> a275b315334d clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
>>> 5682e268350f clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
>>>
>>> Out of these, All the interesting ones are clk related:
>>>
>>> 56e1ee353943 Merge branch 'clk-helpers' (early part) into clk-fixes
>>> 04bf9ab3359f clk: fix determine rate error with pass-through clock
>>> 91584eb51b47 Merge branch 'clk-phase' into clk-fixes
>>> bd13c6cbd3c0 Merge tag 'ti-clk-fixes-4.16' of
>>> https://github.com/t-kristo/linux-pm into clk-fixes
>>> 99652a469df1 clk: migrate the count of orphaned clocks at init
>>> 7f95beea3608 clk: update cached phase to respect the fact when setting phase
>>> 762790b75210 clk: ti: am43xx: add set-rate-parent support for display
>>> clkctrl clock
>>> c083dc5f3738 clk: ti: am33xx: add set-rate-parent support for display
>>> clkctrl clock
>>> 49159a9dc3da clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
>>>
>>> I've added the involved parties to Cc. We also see the same thing on
>>> kernelci, where many OMAP based systems now fail to boot, with the
>>> problem starting at the same commit:
>>>
>>> https://kernelci.org/boot/all/job/mainline/branch/master/kernel/v4.16-rc6-431-gbcfc1f455466/
>>>
>>> It's possible that this has already been debugged and a fix is being worked on,
>>> but I'm not aware of anything, since I have not followed my email
>>> while travelling.
>>
>> I've confirmed that omap2plus_defconfig boots on bbb while
>> multi_v7_defconfig fails to boot with the following:
>>
>> l4_wkup_cm:clk:0010:0: failed to disable
>> Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e054
>> pgd = 4b21228f
>> [fa30e054] *pgd=48211452(bad)
>> Internal error: : 1028 [#1] SMP ARM
>> Modules linked in:
>> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc6-00075-g3215b9d57a2c #709
>> Hardware name: Generic AM33XX (Flattened Device Tree)
>> PC is at _update_sysc_cache+0x2c/0x88
>> LR is at _enable+0x19c/0x274
>> pc : [<c032a844>]    lr : [<c032afc8>]    psr: 40000013
>> sp : db0adea0  ip : 00000003  fp : 00000000
>> r10: c144997c  r9 : 00000157  r8 : 00000003
>> r7 : c151d30c  r6 : 00000000  r5 : c1678ef4  r4 : c151b2f0
>> r3 : fa30e054  r2 : c151b360  r1 : 00000054  r0 : c151b2f0
>> Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
>> Control: 10c5387d  Table: 80204019  DAC: 00000051
>> Process swapper/0 (pid: 1, stack limit = 0x2ddf0754)
>> Stack: (0xdb0adea0 to 0xdb0ae000)
>> dea0: c151b2f0 c032afc8 00000000 a0000013 c1504c48 c151b2f0 c151b314 c1504c48
>> dec0: c151b328 c1311c78 a0000013 c0c15ec4 00000011 edaa6d91 c131297c c151b2f0
>> dee0: c150ce28 c131297c ffffe000 c1312a68 c1504c48 00000000 c131297c c0302730
>> df00: dfdffb06 dfdffafa c1250ecc 00000100 00000157 c0361f34 c124f400 c10cc358
>> df20: 00000000 00000002 00000002 c10dec28 00000000 c1504c48 c10eeca0 c10dec9c
>> df40: 00000000 dfdffb06 00000000 edaa6d91 00000000 c1677700 c1677700 c13cf824
>> df60: c13cf83c 00000003 00000157 c144997c 00000000 c1300e2c 00000002 00000002
>> df80: 00000000 c13005c0 00000000 c0d96788 00000000 00000000 00000000 00000000
>> dfa0: 00000000 c0d96790 00000000 c03010e8 00000000 00000000 00000000 00000000
>> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 d5370d56 dcffd777
>> [<c032a844>] (_update_sysc_cache) from [<c032afc8>] (_enable+0x19c/0x274)
>> [<c032afc8>] (_enable) from [<c1311c78>] (_setup.part.16+0xd8/0x418)
>> [<c1311c78>] (_setup.part.16) from [<c1312a68>] (__omap_hwmod_setup_all+0xec/0x100)
>> [<c1312a68>] (__omap_hwmod_setup_all) from [<c0302730>] (do_one_initcall+0x54/0x18c)
>> [<c0302730>] (do_one_initcall) from [<c1300e2c>] (kernel_init_freeable+0x144/0x1d0)
>> [<c1300e2c>] (kernel_init_freeable) from [<c0d96790>] (kernel_init+0x8/0x110)
>> [<c0d96790>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
>> Exception stack(0xdb0adfb0 to 0xdb0adff8)
>> dfa0:                                     00000000 00000000 00000000 00000000
>> dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
>> Code: e31c0c01 e5903048 e0833001 1a00000a (e5933000)
>>
>> Tero, it might be some timing related clock issue?
> 
> Looks like git bisect points to commit c083dc5f3738 ("clk: ti: am33xx:
> add set-rate-parent support for display clkctrl clock"). I also verified
> reverting it makes bbb boot again.

Ok managed to do some debugging for this today, and fixed it.

The root cause for this is a config flag overlap, and it was introduced 
as a side effect of the mentioned patch for am33xx. Same issue is 
present for am43xx. The exact bug is that when I introduced the 
set-rate-parent feature, I re-used a generic clock flag but this also 
masked a check whether an IP is ready to be accessed yet or not. The bug 
only impacts the DSS clocks for the mentioned platforms but is enough to 
make it fail boot with multi_v7 config. The problem is not visible in 
omap2plus build, as it has number of debug features enabled, making the 
code execute just that small bit slower and it doesn't need the extra 
check for the IP at all.

I'll post the fix in a separate patch email in a minute.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel