* [U-Boot] [PATCH v3 0/5] ARM: i.MX6: Add proper CONFIG names
@ 2018-03-26 12:16 Jagan Teki
2018-03-26 12:16 ` [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures Jagan Teki
` (4 more replies)
0 siblings, 5 replies; 10+ messages in thread
From: Jagan Teki @ 2018-03-26 12:16 UTC (permalink / raw)
To: u-boot
This series add proper CONFIG names for i.MX6 architecture code,
where CONFIG_MX6 become CONFIG_ARCH_IMX6 and rest of SOC types
like CONFIG_MX6Q become CONFIG_SOC_IMX6Q which is similar to Linux.
patch 1: Update new CONFIG names globally to all files for i.MX6 code
patch 2: Add separate u-boot dtsi files for i.MX6QDL dt files
patch 3: Move imx6ul-isiot usdhc2 into dtsi
patch 4: Add separate u-boot dtsi files for i.MX6UL dt files
patch 5: Build dtbs based on the SOC types
Changes for v3:
- Drop patch "Change SYS_SOC from mx6 to imx6"
Changes for v2:
- Add new patch "ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi"
- Fixed *u-boot.dtsi files
- Fixed board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg to use imx6
Jagan Teki (5):
i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures
ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot,dm-spl
ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi
ARM: dts: i.MX6UL: U-Boot specific dts for u-boot,dm-spl
ARM: i.MX6: dts: Build dtb based on SOC type
Makefile | 2 +-
arch/arm/Kconfig | 6 +-
arch/arm/dts/Makefile | 44 ++++++----
arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi | 11 +++
arch/arm/dts/imx6dl-icore-mipi.dts | 1 -
arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi | 7 ++
arch/arm/dts/imx6dl-icore-u-boot.dtsi | 7 ++
arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi | 11 +++
arch/arm/dts/imx6q-icore-mipi.dts | 1 -
arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi | 7 ++
arch/arm/dts/imx6q-icore-u-boot.dtsi | 7 ++
arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi | 23 +++++
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 4 -
arch/arm/dts/imx6qdl-icore-u-boot.dtsi | 19 ++++
arch/arm/dts/imx6qdl-icore.dtsi | 3 -
arch/arm/dts/imx6qdl-u-boot.dtsi | 27 ++++++
arch/arm/dts/imx6qdl.dtsi | 5 --
arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi | 25 ++++++
arch/arm/dts/imx6ul-geam-kit.dts | 4 -
arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi | 11 +++
arch/arm/dts/imx6ul-isiot-emmc.dts | 25 +-----
arch/arm/dts/imx6ul-isiot-nand.dts | 1 +
arch/arm/dts/imx6ul-isiot-u-boot.dtsi | 19 ++++
arch/arm/dts/imx6ul-isiot.dtsi | 29 ++++++-
arch/arm/dts/imx6ul-u-boot.dtsi | 31 +++++++
arch/arm/dts/imx6ul.dtsi | 6 --
arch/arm/include/asm/arch-mx6/crm_regs.h | 46 +++++-----
arch/arm/include/asm/arch-mx6/imx-rdc.h | 4 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 69 ++++++++-------
arch/arm/include/asm/arch-mx6/mx6-ddr.h | 20 ++---
arch/arm/include/asm/arch-mx6/mx6-pins.h | 18 ++--
arch/arm/include/asm/arch-mx6/mx6_plugin.S | 6 +-
arch/arm/include/asm/arch-mx6/mx6dl-ddr.h | 4 +-
arch/arm/include/asm/arch-mx6/mx6q-ddr.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6sl-ddr.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6sx-ddr.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6ul-ddr.h | 2 +-
arch/arm/include/asm/mach-imx/dma.h | 2 +-
arch/arm/include/asm/mach-imx/iomux-v3.h | 11 +--
arch/arm/include/asm/mach-imx/mxc_i2c.h | 2 +-
arch/arm/include/asm/mach-imx/regs-apbh.h | 6 +-
arch/arm/include/asm/mach-imx/regs-bch.h | 4 +-
arch/arm/include/asm/mach-imx/regs-lcdif.h | 21 +++--
arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
arch/arm/mach-imx/Kconfig | 12 +--
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/cache.c | 2 +-
arch/arm/mach-imx/cpu.c | 6 +-
arch/arm/mach-imx/init.c | 2 +-
arch/arm/mach-imx/iomux-v3.c | 6 +-
arch/arm/mach-imx/mx6/Kconfig | 100 +++++++++++-----------
arch/arm/mach-imx/mx6/Makefile | 4 +-
arch/arm/mach-imx/mx6/clock.c | 14 +--
arch/arm/mach-imx/mx6/ddr.c | 20 +++--
arch/arm/mach-imx/mx6/soc.c | 6 +-
arch/arm/mach-imx/spl.c | 8 +-
arch/arm/mach-imx/timer.c | 2 +-
board/bachmann/ot1200/ot1200_spl.c | 4 +-
board/barco/platinum/spl_picon.c | 4 +-
board/barco/platinum/spl_titanium.c | 4 +-
board/boundary/nitrogen6x/ddr-setup.cfg | 8 +-
board/compulab/cm_fx6/cm_fx6.c | 6 +-
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 4 +-
board/dhelectronics/dh_imx6/dh_imx6.c | 4 +-
board/engicam/common/spl.c | 24 +++---
board/engicam/imx6q/MAINTAINERS | 11 ++-
board/engicam/imx6ul/MAINTAINERS | 5 ++
board/freescale/mx6memcal/spl.c | 6 +-
board/freescale/mx6qarm2/mx6qarm2.c | 8 +-
board/freescale/mx6sabreauto/mx6sabreauto.c | 8 +-
board/freescale/mx6sabresd/mx6sabresd.c | 8 +-
board/freescale/mx6sllevk/mx6sllevk.c | 2 +-
board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 2 +-
board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +-
board/freescale/mx6ul_14x14_evk/README | 6 +-
board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 4 +-
board/freescale/mx6ullevk/README | 6 +-
board/freescale/mx6ullevk/mx6ullevk.c | 2 +-
board/gateworks/gw_ventana/gw_ventana_spl.c | 4 +-
board/kosagi/novena/novena_spl.c | 4 +-
board/liebherr/mccmon6/spl.c | 4 +-
board/logicpd/imx6/imx6logic.c | 2 +-
board/seco/Kconfig | 6 +-
board/solidrun/mx6cuboxi/mx6cuboxi.c | 10 +--
board/tbs/tbs2910/Kconfig | 2 +-
board/toradex/apalis_imx6/ddr-setup.cfg | 8 +-
board/toradex/colibri_imx6/ddr-setup.cfg | 8 +-
board/tqc/tqma6/Kconfig | 6 +-
board/udoo/README | 4 +-
board/udoo/udoo.c | 4 +-
board/udoo/udoo_spl.c | 4 +-
board/wandboard/spl.c | 8 +-
board/wandboard/wandboard.c | 6 +-
cmd/fastboot/Kconfig | 3 +-
common/spl/Kconfig | 6 +-
common/spl/spl.c | 2 +-
configs/apalis_imx6_defconfig | 4 +-
configs/apalis_imx6_nospl_com_defconfig | 4 +-
configs/apalis_imx6_nospl_it_defconfig | 4 +-
configs/aristainetos2_defconfig | 4 +-
configs/aristainetos2b_defconfig | 4 +-
configs/aristainetos_defconfig | 4 +-
configs/cgtqmx6eval_defconfig | 2 +-
configs/cm_fx6_defconfig | 2 +-
configs/colibri_imx6_defconfig | 4 +-
configs/colibri_imx6_nospl_defconfig | 4 +-
configs/dh_imx6_defconfig | 2 +-
configs/display5_defconfig | 4 +-
configs/display5_factory_defconfig | 4 +-
configs/dms-ba16-1g_defconfig | 2 +-
configs/dms-ba16_defconfig | 2 +-
configs/ge_b450v3_defconfig | 2 +-
configs/ge_b650v3_defconfig | 2 +-
configs/ge_b850v3_defconfig | 2 +-
configs/gwventana_emmc_defconfig | 2 +-
configs/gwventana_gw5904_defconfig | 2 +-
configs/gwventana_nand_defconfig | 2 +-
configs/imx6dl_icore_nand_defconfig | 2 +-
configs/imx6q_icore_nand_defconfig | 2 +-
configs/imx6q_logic_defconfig | 4 +-
configs/imx6qdl_icore_mipi_defconfig | 2 +-
configs/imx6qdl_icore_mmc_defconfig | 2 +-
configs/imx6qdl_icore_nand_defconfig | 2 +-
configs/imx6qdl_icore_rqs_defconfig | 2 +-
configs/imx6ul_geam_mmc_defconfig | 2 +-
configs/imx6ul_geam_nand_defconfig | 2 +-
configs/imx6ul_isiot_emmc_defconfig | 2 +-
configs/imx6ul_isiot_nand_defconfig | 2 +-
configs/liteboard_defconfig | 2 +-
configs/marsboard_defconfig | 4 +-
configs/mccmon6_nor_defconfig | 2 +-
configs/mccmon6_sd_defconfig | 2 +-
configs/mx6cuboxi_defconfig | 2 +-
configs/mx6dlarm2_defconfig | 4 +-
configs/mx6dlarm2_lpddr2_defconfig | 4 +-
configs/mx6memcal_defconfig | 4 +-
configs/mx6qarm2_defconfig | 4 +-
configs/mx6qarm2_lpddr2_defconfig | 4 +-
configs/mx6qsabrelite_defconfig | 4 +-
configs/mx6sabreauto_defconfig | 2 +-
configs/mx6sabresd_defconfig | 2 +-
configs/mx6slevk_defconfig | 2 +-
configs/mx6slevk_spinor_defconfig | 2 +-
configs/mx6slevk_spl_defconfig | 2 +-
configs/mx6sllevk_defconfig | 2 +-
configs/mx6sllevk_plugin_defconfig | 2 +-
configs/mx6sxsabreauto_defconfig | 2 +-
configs/mx6sxsabresd_defconfig | 2 +-
configs/mx6sxsabresd_spl_defconfig | 2 +-
configs/mx6ul_14x14_evk_defconfig | 2 +-
configs/mx6ul_9x9_evk_defconfig | 2 +-
configs/mx6ull_14x14_evk_defconfig | 2 +-
configs/mx6ull_14x14_evk_plugin_defconfig | 2 +-
configs/nitrogen6dl2g_defconfig | 4 +-
configs/nitrogen6dl_defconfig | 4 +-
configs/nitrogen6q2g_defconfig | 4 +-
configs/nitrogen6q_defconfig | 4 +-
configs/nitrogen6s1g_defconfig | 4 +-
configs/nitrogen6s_defconfig | 4 +-
configs/novena_defconfig | 4 +-
configs/opos6uldev_defconfig | 2 +-
configs/ot1200_defconfig | 4 +-
configs/ot1200_spl_defconfig | 4 +-
configs/pcm058_defconfig | 4 +-
configs/pfla02_defconfig | 2 +-
configs/pico-imx6ul_defconfig | 2 +-
configs/platinum_picon_defconfig | 4 +-
configs/platinum_titanium_defconfig | 4 +-
configs/riotboard_defconfig | 4 +-
configs/secomx6quq7_defconfig | 4 +-
configs/sksimx6_defconfig | 4 +-
configs/tbs2910_defconfig | 2 +-
configs/titanium_defconfig | 2 +-
configs/tqma6dl_mba6_mmc_defconfig | 2 +-
configs/tqma6dl_mba6_spi_defconfig | 2 +-
configs/tqma6q_mba6_mmc_defconfig | 2 +-
configs/tqma6q_mba6_spi_defconfig | 2 +-
configs/tqma6s_mba6_mmc_defconfig | 2 +-
configs/tqma6s_mba6_spi_defconfig | 2 +-
configs/tqma6s_wru4_mmc_defconfig | 2 +-
configs/udoo_defconfig | 2 +-
configs/udoo_neo_defconfig | 2 +-
configs/vining_2000_defconfig | 2 +-
configs/wandboard_defconfig | 2 +-
configs/warp_defconfig | 2 +-
configs/xpress_defconfig | 2 +-
configs/xpress_spl_defconfig | 2 +-
configs/zc5202_defconfig | 4 +-
configs/zc5601_defconfig | 4 +-
doc/README.imx6 | 2 +-
doc/README.imximage | 4 +-
drivers/ata/dwc_ahsata.c | 2 +-
drivers/crypto/fsl/jobdesc.c | 2 +-
drivers/dma/Kconfig | 2 +-
drivers/dma/apbh_dma.c | 2 +-
drivers/gpio/mxc_gpio.c | 23 ++---
drivers/i2c/Kconfig | 2 +-
drivers/misc/mxc_ocotp.c | 8 +-
drivers/mmc/Kconfig | 6 +-
drivers/mtd/nand/Kconfig | 6 +-
drivers/mtd/nand/mxs_nand.c | 2 +-
drivers/net/Kconfig | 2 +-
drivers/net/fec_mxc.c | 2 +-
drivers/net/fec_mxc.h | 4 +-
drivers/pci/pcie_imx.c | 14 +--
drivers/pinctrl/nxp/Kconfig | 2 +-
drivers/pwm/pwm-imx-util.c | 4 +-
drivers/serial/Kconfig | 2 +-
drivers/spi/fsl_qspi.c | 18 ++--
drivers/thermal/Kconfig | 2 +-
drivers/thermal/imx_thermal.c | 2 +-
drivers/usb/host/Kconfig | 4 +-
drivers/usb/host/ehci-mx6.c | 8 +-
drivers/video/Kconfig | 2 +-
drivers/video/ipu_regs.h | 2 +-
env/Kconfig | 2 +-
include/configs/cgtqmx6eval.h | 4 +-
include/configs/cm_fx6.h | 2 +-
include/configs/ge_bx50v3.h | 2 +-
include/configs/imx6-engicam.h | 4 +-
include/configs/imx6_spl.h | 4 +-
include/configs/mx6_common.h | 12 +--
include/configs/mx6cuboxi.h | 12 +--
include/configs/mx6memcal.h | 2 +-
include/configs/mx6sabre_common.h | 12 +--
include/configs/titanium.h | 2 +-
include/configs/udoo.h | 4 +-
include/configs/wandboard.h | 14 +--
include/fsl_sec.h | 8 +-
lib/rsa/Kconfig | 4 +-
230 files changed, 825 insertions(+), 614 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6dl-icore-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6q-icore-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6qdl-icore-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6qdl-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6ul-isiot-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6ul-u-boot.dtsi
--
2.14.3
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures 2018-03-26 12:16 [U-Boot] [PATCH v3 0/5] ARM: i.MX6: Add proper CONFIG names Jagan Teki @ 2018-03-26 12:16 ` Jagan Teki 2018-03-26 12:37 ` Stefano Babic 2018-03-26 12:39 ` Stefano Babic 2018-03-26 12:16 ` [U-Boot] [PATCH v3 2/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl Jagan Teki ` (3 subsequent siblings) 4 siblings, 2 replies; 10+ messages in thread From: Jagan Teki @ 2018-03-26 12:16 UTC (permalink / raw) To: u-boot ARCH_MX6 -> ARCH_IMX6 MX6 -> SOC_IMX6 MX6D -> SOC_IMX6D MX6DL -> SOC_IMX6DL MX6Q -> SOC_IMX6Q MX6S -> SOC_IMX6S MX6SL -> SOC_IMX6SL MX6Sx -> SOC_IMX6SX MX6SLL -> SOC_IMX6SLL MX6UL -> SOC_IMX6UL MX6UL_LITESOM -> SOC_IMX6UL_LITESOM MX6UL_OPOS6UL -> SOC_IMX6UL_OPOS6UL MX6ULL -> SOC_IMX6ULL "MX6" -> "i.MX6" Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Makefile | 2 +- arch/arm/Kconfig | 6 +- arch/arm/dts/Makefile | 2 +- arch/arm/include/asm/arch-mx6/crm_regs.h | 46 +++++----- arch/arm/include/asm/arch-mx6/imx-rdc.h | 4 +- arch/arm/include/asm/arch-mx6/imx-regs.h | 69 ++++++++------- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 20 ++--- arch/arm/include/asm/arch-mx6/mx6-pins.h | 18 ++-- arch/arm/include/asm/arch-mx6/mx6_plugin.S | 6 +- arch/arm/include/asm/arch-mx6/mx6dl-ddr.h | 4 +- arch/arm/include/asm/arch-mx6/mx6q-ddr.h | 2 +- arch/arm/include/asm/arch-mx6/mx6sl-ddr.h | 2 +- arch/arm/include/asm/arch-mx6/mx6sx-ddr.h | 2 +- arch/arm/include/asm/arch-mx6/mx6ul-ddr.h | 2 +- arch/arm/include/asm/mach-imx/dma.h | 2 +- arch/arm/include/asm/mach-imx/iomux-v3.h | 11 +-- arch/arm/include/asm/mach-imx/mxc_i2c.h | 2 +- arch/arm/include/asm/mach-imx/regs-apbh.h | 6 +- arch/arm/include/asm/mach-imx/regs-bch.h | 4 +- arch/arm/include/asm/mach-imx/regs-lcdif.h | 21 +++-- arch/arm/include/asm/mach-imx/sys_proto.h | 6 +- arch/arm/mach-imx/Kconfig | 12 +-- arch/arm/mach-imx/Makefile | 2 +- arch/arm/mach-imx/cache.c | 2 +- arch/arm/mach-imx/cpu.c | 6 +- arch/arm/mach-imx/init.c | 2 +- arch/arm/mach-imx/iomux-v3.c | 6 +- arch/arm/mach-imx/mx6/Kconfig | 100 +++++++++++----------- arch/arm/mach-imx/mx6/Makefile | 4 +- arch/arm/mach-imx/mx6/clock.c | 14 +-- arch/arm/mach-imx/mx6/ddr.c | 20 +++-- arch/arm/mach-imx/mx6/soc.c | 6 +- arch/arm/mach-imx/spl.c | 8 +- arch/arm/mach-imx/timer.c | 2 +- board/bachmann/ot1200/ot1200_spl.c | 4 +- board/barco/platinum/spl_picon.c | 4 +- board/barco/platinum/spl_titanium.c | 4 +- board/boundary/nitrogen6x/ddr-setup.cfg | 8 +- board/compulab/cm_fx6/cm_fx6.c | 6 +- board/congatec/cgtqmx6eval/cgtqmx6eval.c | 4 +- board/dhelectronics/dh_imx6/dh_imx6.c | 4 +- board/engicam/common/spl.c | 24 +++--- board/freescale/mx6memcal/spl.c | 6 +- board/freescale/mx6qarm2/mx6qarm2.c | 8 +- board/freescale/mx6sabreauto/mx6sabreauto.c | 8 +- board/freescale/mx6sabresd/mx6sabresd.c | 8 +- board/freescale/mx6sllevk/mx6sllevk.c | 2 +- board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 2 +- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- board/freescale/mx6ul_14x14_evk/README | 6 +- board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 4 +- board/freescale/mx6ullevk/README | 6 +- board/freescale/mx6ullevk/mx6ullevk.c | 2 +- board/gateworks/gw_ventana/gw_ventana_spl.c | 4 +- board/kosagi/novena/novena_spl.c | 4 +- board/liebherr/mccmon6/spl.c | 4 +- board/logicpd/imx6/imx6logic.c | 2 +- board/seco/Kconfig | 6 +- board/solidrun/mx6cuboxi/mx6cuboxi.c | 10 +-- board/tbs/tbs2910/Kconfig | 2 +- board/toradex/apalis_imx6/ddr-setup.cfg | 8 +- board/toradex/colibri_imx6/ddr-setup.cfg | 8 +- board/tqc/tqma6/Kconfig | 6 +- board/udoo/README | 4 +- board/udoo/udoo.c | 4 +- board/udoo/udoo_spl.c | 4 +- board/wandboard/spl.c | 8 +- board/wandboard/wandboard.c | 6 +- cmd/fastboot/Kconfig | 3 +- common/spl/Kconfig | 6 +- common/spl/spl.c | 2 +- configs/apalis_imx6_defconfig | 4 +- configs/apalis_imx6_nospl_com_defconfig | 4 +- configs/apalis_imx6_nospl_it_defconfig | 4 +- configs/aristainetos2_defconfig | 4 +- configs/aristainetos2b_defconfig | 4 +- configs/aristainetos_defconfig | 4 +- configs/cgtqmx6eval_defconfig | 2 +- configs/cm_fx6_defconfig | 2 +- configs/colibri_imx6_defconfig | 4 +- configs/colibri_imx6_nospl_defconfig | 4 +- configs/dh_imx6_defconfig | 2 +- configs/display5_defconfig | 4 +- configs/display5_factory_defconfig | 4 +- configs/dms-ba16-1g_defconfig | 2 +- configs/dms-ba16_defconfig | 2 +- configs/ge_b450v3_defconfig | 2 +- configs/ge_b650v3_defconfig | 2 +- configs/ge_b850v3_defconfig | 2 +- configs/gwventana_emmc_defconfig | 2 +- configs/gwventana_gw5904_defconfig | 2 +- configs/gwventana_nand_defconfig | 2 +- configs/imx6dl_icore_nand_defconfig | 2 +- configs/imx6q_icore_nand_defconfig | 2 +- configs/imx6q_logic_defconfig | 4 +- configs/imx6qdl_icore_mipi_defconfig | 2 +- configs/imx6qdl_icore_mmc_defconfig | 2 +- configs/imx6qdl_icore_nand_defconfig | 2 +- configs/imx6qdl_icore_rqs_defconfig | 2 +- configs/imx6ul_geam_mmc_defconfig | 2 +- configs/imx6ul_geam_nand_defconfig | 2 +- configs/imx6ul_isiot_emmc_defconfig | 2 +- configs/imx6ul_isiot_nand_defconfig | 2 +- configs/liteboard_defconfig | 2 +- configs/marsboard_defconfig | 4 +- configs/mccmon6_nor_defconfig | 2 +- configs/mccmon6_sd_defconfig | 2 +- configs/mx6cuboxi_defconfig | 2 +- configs/mx6dlarm2_defconfig | 4 +- configs/mx6dlarm2_lpddr2_defconfig | 4 +- configs/mx6memcal_defconfig | 4 +- configs/mx6qarm2_defconfig | 4 +- configs/mx6qarm2_lpddr2_defconfig | 4 +- configs/mx6qsabrelite_defconfig | 4 +- configs/mx6sabreauto_defconfig | 2 +- configs/mx6sabresd_defconfig | 2 +- configs/mx6slevk_defconfig | 2 +- configs/mx6slevk_spinor_defconfig | 2 +- configs/mx6slevk_spl_defconfig | 2 +- configs/mx6sllevk_defconfig | 2 +- configs/mx6sllevk_plugin_defconfig | 2 +- configs/mx6sxsabreauto_defconfig | 2 +- configs/mx6sxsabresd_defconfig | 2 +- configs/mx6sxsabresd_spl_defconfig | 2 +- configs/mx6ul_14x14_evk_defconfig | 2 +- configs/mx6ul_9x9_evk_defconfig | 2 +- configs/mx6ull_14x14_evk_defconfig | 2 +- configs/mx6ull_14x14_evk_plugin_defconfig | 2 +- configs/nitrogen6dl2g_defconfig | 4 +- configs/nitrogen6dl_defconfig | 4 +- configs/nitrogen6q2g_defconfig | 4 +- configs/nitrogen6q_defconfig | 4 +- configs/nitrogen6s1g_defconfig | 4 +- configs/nitrogen6s_defconfig | 4 +- configs/novena_defconfig | 4 +- configs/opos6uldev_defconfig | 2 +- configs/ot1200_defconfig | 4 +- configs/ot1200_spl_defconfig | 4 +- configs/pcm058_defconfig | 4 +- configs/pfla02_defconfig | 2 +- configs/pico-imx6ul_defconfig | 2 +- configs/platinum_picon_defconfig | 4 +- configs/platinum_titanium_defconfig | 4 +- configs/riotboard_defconfig | 4 +- configs/secomx6quq7_defconfig | 4 +- configs/sksimx6_defconfig | 4 +- configs/tbs2910_defconfig | 2 +- configs/titanium_defconfig | 2 +- configs/tqma6dl_mba6_mmc_defconfig | 2 +- configs/tqma6dl_mba6_spi_defconfig | 2 +- configs/tqma6q_mba6_mmc_defconfig | 2 +- configs/tqma6q_mba6_spi_defconfig | 2 +- configs/tqma6s_mba6_mmc_defconfig | 2 +- configs/tqma6s_mba6_spi_defconfig | 2 +- configs/tqma6s_wru4_mmc_defconfig | 2 +- configs/udoo_defconfig | 2 +- configs/udoo_neo_defconfig | 2 +- configs/vining_2000_defconfig | 2 +- configs/wandboard_defconfig | 2 +- configs/warp_defconfig | 2 +- configs/xpress_defconfig | 2 +- configs/xpress_spl_defconfig | 2 +- configs/zc5202_defconfig | 4 +- configs/zc5601_defconfig | 4 +- doc/README.imx6 | 2 +- doc/README.imximage | 4 +- drivers/ata/dwc_ahsata.c | 2 +- drivers/crypto/fsl/jobdesc.c | 2 +- drivers/dma/Kconfig | 2 +- drivers/dma/apbh_dma.c | 2 +- drivers/gpio/mxc_gpio.c | 23 ++--- drivers/i2c/Kconfig | 2 +- drivers/misc/mxc_ocotp.c | 8 +- drivers/mmc/Kconfig | 6 +- drivers/mtd/nand/Kconfig | 6 +- drivers/mtd/nand/mxs_nand.c | 2 +- drivers/net/Kconfig | 2 +- drivers/net/fec_mxc.c | 2 +- drivers/net/fec_mxc.h | 4 +- drivers/pci/pcie_imx.c | 14 +-- drivers/pinctrl/nxp/Kconfig | 2 +- drivers/pwm/pwm-imx-util.c | 4 +- drivers/serial/Kconfig | 2 +- drivers/spi/fsl_qspi.c | 18 ++-- drivers/thermal/Kconfig | 2 +- drivers/thermal/imx_thermal.c | 2 +- drivers/usb/host/Kconfig | 4 +- drivers/usb/host/ehci-mx6.c | 8 +- drivers/video/Kconfig | 2 +- drivers/video/ipu_regs.h | 2 +- env/Kconfig | 2 +- include/configs/cgtqmx6eval.h | 4 +- include/configs/cm_fx6.h | 2 +- include/configs/ge_bx50v3.h | 2 +- include/configs/imx6-engicam.h | 4 +- include/configs/imx6_spl.h | 4 +- include/configs/mx6_common.h | 12 +-- include/configs/mx6cuboxi.h | 12 +-- include/configs/mx6memcal.h | 2 +- include/configs/mx6sabre_common.h | 12 +-- include/configs/titanium.h | 2 +- include/configs/udoo.h | 4 +- include/configs/wandboard.h | 14 +-- include/fsl_sec.h | 8 +- lib/rsa/Kconfig | 4 +- 205 files changed, 552 insertions(+), 545 deletions(-) diff --git a/Makefile b/Makefile index 5fa14789d9..a969fef1dd 100644 --- a/Makefile +++ b/Makefile @@ -778,7 +778,7 @@ ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl endif endif ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin -ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy) +ifeq ($(CONFIG_SOC_IMX6)$(CONFIG_SECURE_BOOT), yy) ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img else ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b8f7a982d9..ad7f0c1f7d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -641,8 +641,8 @@ config ARCH_MX7 select ARCH_MISC_INIT imply MXC_GPIO -config ARCH_MX6 - bool "Freescale MX6" +config ARCH_IMX6 + bool "Freescale i.MX6" select CPU_V7 select SYS_FSL_HAS_SEC if SECURE_BOOT select SYS_FSL_SEC_COMPAT_4 @@ -650,7 +650,7 @@ config ARCH_MX6 select SYS_THUMB_BUILD if SPL imply MXC_GPIO -if ARCH_MX6 +if ARCH_IMX6 config SPL_LDSCRIPT default "arch/arm/mach-omap2/u-boot-spl.lds" endif diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7dd1dffae5..7a5f0a36a3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -385,7 +385,7 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb -dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \ +dtb-$(CONFIG_SOC_IMX6) += imx6ull-14x14-evk.dtb \ imx6sl-evk.dtb \ imx6sll-evk.dtb \ imx6dl-icore.dtb \ diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 74ed91230f..e5f699f691 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -205,7 +205,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCR_WB_COUNT_MASK 0x7 #define MXC_CCM_CCR_WB_COUNT_OFFSET (1 << 16) #define MXC_CCM_CCR_COSC_EN (1 << 12) -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define MXC_CCM_CCR_OSCNT_MASK 0x7F #else #define MXC_CCM_CCR_OSCNT_MASK 0xFF @@ -275,7 +275,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CBCMR_PERIPH2_CLK2_SEL (1 << 20) #define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK (0x3 << 18) #define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET 18 -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 16) #define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET 16 #define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14) @@ -283,7 +283,7 @@ struct mxc_ccm_reg { #endif #define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK (0x3 << 12) #define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET 12 -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CBCMR_VDOAXI_CLK_SEL (1 << 11) #endif #define MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL (1 << 10) @@ -336,7 +336,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCMR1_PERCLK_PODF_MASK 0x3F /* Define the bits in register CSCMR2 */ -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define MXC_CCM_CSCMR2_VID_CLK_SEL_MASK (0x7 << 21) #define MXC_CCM_CSCMR2_VID_CLK_SEL_OFFSET 21 #endif @@ -352,7 +352,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET 2 /* Define the bits in register CSCDR1 */ -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CSCDR1_VPU_AXI_PODF_MASK (0x7 << 25) #define MXC_CCM_CSCDR1_VPU_AXI_PODF_OFFSET 25 #endif @@ -370,7 +370,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET 16 #define MXC_CCM_CSCDR1_USDHC1_PODF_MASK (0x7 << 11) #define MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET 11 -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET 8 #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6 @@ -382,7 +382,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) /* Define the bits in register CS1CDR */ -/* MX6UL, !MX6ULL */ +/* i.MX6UL, !i.MX6ULL */ #define MXC_CCM_CS1CDR_SAI3_CLK_PRED_MASK (0x7 << 22) #define MXC_CCM_CS1CDR_SAI3_CLK_PRED_OFFSET 22 #define MXC_CCM_CS1CDR_SAI3_CLK_PODF_MASK (0x3F << 16) @@ -454,7 +454,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET 0 /* Define the bits in register CDCDR */ -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CDCDR_HSI_TX_PODF_MASK (0x7 << 29) #define MXC_CCM_CDCDR_HSI_TX_PODF_OFFSET 29 #define MXC_CCM_CDCDR_HSI_TX_CLK_SEL (1 << 28) @@ -572,7 +572,7 @@ struct mxc_ccm_reg { /* Define the bits in register CDHIPR */ #define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16) #define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CDHIPR_MMDC_CH0_PODF_BUSY (1 << 4) #endif #define MXC_CCM_CDHIPR_PERIPH2_CLK_SEL_BUSY (1 << 3) @@ -583,14 +583,14 @@ struct mxc_ccm_reg { /* Define the bits in register CLPCR */ #define MXC_CCM_CLPCR_MASK_L2CC_IDLE (1 << 27) #define MXC_CCM_CLPCR_MASK_SCU_IDLE (1 << 26) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CLPCR_MASK_CORE3_WFI (1 << 25) #define MXC_CCM_CLPCR_MASK_CORE2_WFI (1 << 24) #define MXC_CCM_CLPCR_MASK_CORE1_WFI (1 << 23) #endif #define MXC_CCM_CLPCR_MASK_CORE0_WFI (1 << 22) #define MXC_CCM_CLPCR_BYP_MMDC_CH1_LPM_HS (1 << 21) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CLPCR_BYP_MMDC_CH0_LPM_HS (1 << 19) #define MXC_CCM_CLPCR_WB_CORE_AT_LPM (1 << 17) #endif @@ -602,7 +602,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CLPCR_DIS_REF_OSC (1 << 7) #define MXC_CCM_CLPCR_SBYOS (1 << 6) #define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (1 << 5) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3) #define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET 3 #define MXC_CCM_CLPCR_BYPASS_PMIC_VFUNC_READY (1 << 2) @@ -612,7 +612,7 @@ struct mxc_ccm_reg { /* Define the bits in register CISR */ #define MXC_CCM_CISR_ARM_PODF_LOADED (1 << 26) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CISR_MMDC_CH0_PODF_LOADED (1 << 23) #endif #define MXC_CCM_CISR_PERIPH_CLK_SEL_LOADED (1 << 22) @@ -625,7 +625,7 @@ struct mxc_ccm_reg { /* Define the bits in register CIMR */ #define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (1 << 26) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CIMR_MASK_MMDC_CH0_PODF_LOADED (1 << 23) #endif #define MXC_CCM_CIMR_MASK_PERIPH_CLK_SEL_LOADED (1 << 22) @@ -692,7 +692,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR0_DCIC1_MASK (3 << MXC_CCM_CCGR0_DCIC1_OFFSET) #define MXC_CCM_CCGR0_DCIC2_OFFSET 26 #define MXC_CCM_CCGR0_DCIC2_MASK (3 << MXC_CCM_CCGR0_DCIC2_OFFSET) -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR0_AIPS_TZ3_OFFSET 30 #define MXC_CCM_CCGR0_AIPS_TZ3_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ3_OFFSET) #else @@ -719,7 +719,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR1_EPIT2S_MASK (3 << MXC_CCM_CCGR1_EPIT2S_OFFSET) #define MXC_CCM_CCGR1_ESAIS_OFFSET 16 #define MXC_CCM_CCGR1_ESAIS_MASK (3 << MXC_CCM_CCGR1_ESAIS_OFFSET) -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR1_WAKEUP_OFFSET 18 #define MXC_CCM_CCGR1_WAKEUP_MASK (3 << MXC_CCM_CCGR1_WAKEUP_OFFSET) #endif @@ -727,13 +727,13 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR1_GPT_BUS_MASK (3 << MXC_CCM_CCGR1_GPT_BUS_OFFSET) #define MXC_CCM_CCGR1_GPT_SERIAL_OFFSET 22 #define MXC_CCM_CCGR1_GPT_SERIAL_MASK (3 << MXC_CCM_CCGR1_GPT_SERIAL_OFFSET) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR1_GPU2D_OFFSET 24 #define MXC_CCM_CCGR1_GPU2D_MASK (3 << MXC_CCM_CCGR1_GPU2D_OFFSET) #endif #define MXC_CCM_CCGR1_GPU3D_OFFSET 26 #define MXC_CCM_CCGR1_GPU3D_MASK (3 << MXC_CCM_CCGR1_GPU3D_OFFSET) -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR1_OCRAM_S_OFFSET 28 #define MXC_CCM_CCGR1_OCRAM_S_MASK (3 << MXC_CCM_CCGR1_OCRAM_S_OFFSET) #define MXC_CCM_CCGR1_CANFD_OFFSET 30 @@ -746,7 +746,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR2_CSI_OFFSET 2 #define MXC_CCM_CCGR2_CSI_MASK (3 << MXC_CCM_CCGR2_CSI_OFFSET) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET 4 #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET) #endif @@ -839,7 +839,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR3_MLB_MASK (3 << MXC_CCM_CCGR3_MLB_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET 20 #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET 22 #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET) #endif @@ -864,7 +864,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR3_GPIO4_CLK_OFFSET 30 #define MXC_CCM_CCGR3_GPIO4_CLK_MASK (3 << MXC_CCM_CCGR3_GPIO4_CLK_OFFSET) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET 30 #define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET) #endif @@ -903,7 +903,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR5_ROM_OFFSET 0 #define MXC_CCM_CCGR5_ROM_MASK (3 << MXC_CCM_CCGR5_ROM_OFFSET) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR5_SATA_OFFSET 4 #define MXC_CCM_CCGR5_SATA_MASK (3 << MXC_CCM_CCGR5_SATA_OFFSET) #endif @@ -923,7 +923,7 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR5_UART_MASK (3 << MXC_CCM_CCGR5_UART_OFFSET) #define MXC_CCM_CCGR5_UART_SERIAL_OFFSET 26 #define MXC_CCM_CCGR5_UART_SERIAL_MASK (3 << MXC_CCM_CCGR5_UART_SERIAL_OFFSET) -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define MXC_CCM_CCGR5_SAI1_OFFSET 20 #define MXC_CCM_CCGR5_SAI1_MASK (3 << MXC_CCM_CCGR5_SAI1_OFFSET) #define MXC_CCM_CCGR5_SAI2_OFFSET 30 diff --git a/arch/arm/include/asm/arch-mx6/imx-rdc.h b/arch/arm/include/asm/arch-mx6/imx-rdc.h index c4d3bb44b4..d69a92b562 100644 --- a/arch/arm/include/asm/arch-mx6/imx-rdc.h +++ b/arch/arm/include/asm/arch-mx6/imx-rdc.h @@ -7,10 +7,10 @@ #ifndef __IMX_RDC_H__ #define __IMX_RDC_H__ -#if defined(CONFIG_MX6SX) +#if defined(CONFIG_SOC_IMX6SX) #include "mx6sx_rdc.h" #else #error "Please select cpu" -#endif /* CONFIG_MX6SX */ +#endif /* CONFIG_SOC_IMX6SX */ #endif /* __IMX_RDC_H__*/ diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 8513406a8e..1605032a6e 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -12,12 +12,13 @@ #define ROMCP_ARB_BASE_ADDR 0x00000000 #define ROMCP_ARB_END_ADDR 0x000FFFFF -#ifdef CONFIG_MX6SL +#ifdef CONFIG_SOC_IMX6SL #define GPU_2D_ARB_BASE_ADDR 0x02200000 #define GPU_2D_ARB_END_ADDR 0x02203FFF #define OPENVG_ARB_BASE_ADDR 0x02204000 #define OPENVG_ARB_END_ADDR 0x02207FFF -#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#elif (defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL)) #define CAAM_ARB_BASE_ADDR 0x00100000 #define CAAM_ARB_END_ADDR 0x00107FFF #define GPU_ARB_BASE_ADDR 0x01800000 @@ -26,7 +27,7 @@ #define APBH_DMA_ARB_END_ADDR 0x0180BFFF #define M4_BOOTROM_BASE_ADDR 0x007F8000 -#elif !defined(CONFIG_MX6SLL) +#elif !defined(CONFIG_SOC_IMX6SLL) #define CAAM_ARB_BASE_ADDR 0x00100000 #define CAAM_ARB_END_ADDR 0x00103FFF #define APBH_DMA_ARB_BASE_ADDR 0x00110000 @@ -39,16 +40,16 @@ #define GPU_2D_ARB_END_ADDR 0x00137FFF #define DTCP_ARB_BASE_ADDR 0x00138000 #define DTCP_ARB_END_ADDR 0x0013BFFF -#endif /* CONFIG_MX6SL */ +#endif /* CONFIG_SOC_IMX6SL */ #define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR #define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) #define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) /* GPV - PL301 configuration ports */ -#if (defined(CONFIG_MX6SX) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)) +#if (defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX6SL) || \ + defined(CONFIG_SOC_IMX6SLL)) #define GPV2_BASE_ADDR 0x00D00000 #define GPV3_BASE_ADDR 0x00E00000 #define GPV4_BASE_ADDR 0x00F00000 @@ -82,19 +83,19 @@ /* AIPS3 only on i.MX6SX */ #define AIPS3_ARB_BASE_ADDR 0x02200000 #define AIPS3_ARB_END_ADDR 0x022FFFFF -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define WEIM_ARB_BASE_ADDR 0x50000000 #define WEIM_ARB_END_ADDR 0x57FFFFFF #define QSPI0_AMBA_BASE 0x60000000 #define QSPI0_AMBA_END 0x6FFFFFFF #define QSPI1_AMBA_BASE 0x70000000 #define QSPI1_AMBA_END 0x7FFFFFFF -#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#elif (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) #define WEIM_ARB_BASE_ADDR 0x50000000 #define WEIM_ARB_END_ADDR 0x57FFFFFF #define QSPI0_AMBA_BASE 0x60000000 #define QSPI0_AMBA_END 0x6FFFFFFF -#elif !defined(CONFIG_MX6SLL) +#elif !defined(CONFIG_SOC_IMX6SLL) #define SATA_ARB_BASE_ADDR 0x02200000 #define SATA_ARB_END_ADDR 0x02203FFF #define OPENVG_ARB_BASE_ADDR 0x02204000 @@ -109,9 +110,9 @@ #define WEIM_ARB_END_ADDR 0x0FFFFFFF #endif -#if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \ - defined(CONFIG_MX6SX) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#if (defined(CONFIG_SOC_IMX6SLL) || defined(CONFIG_SOC_IMX6SL) || \ + defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL)) #define MMDC0_ARB_BASE_ADDR 0x80000000 #define MMDC0_ARB_END_ADDR 0xFFFFFFFF #define MMDC1_ARB_BASE_ADDR 0xC0000000 @@ -123,7 +124,7 @@ #define MMDC1_ARB_END_ADDR 0xFFFFFFFF #endif -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define IPU_SOC_BASE_ADDR IPU1_ARB_BASE_ADDR #define IPU_SOC_OFFSET 0x00200000 #endif @@ -152,7 +153,7 @@ #define MX6SLL_UART3_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) #define MX6SL_UART4_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) #endif #define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000) @@ -164,7 +165,7 @@ #define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) #define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000) #define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000) #endif @@ -202,17 +203,17 @@ #define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000) #define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000) #define IOMUXC_GPR_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) -#ifdef CONFIG_MX6SLL +#ifdef CONFIG_SOC_IMX6SLL #define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) #define PXP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000) #define EPDC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x74000) #define DCP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x7C000) -#elif defined(CONFIG_MX6SL) +#elif defined(CONFIG_SOC_IMX6SL) #define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) #define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) -#elif defined(CONFIG_MX6SX) +#elif defined(CONFIG_SOC_IMX6SX) #define CANFD1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define SDMA_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) #define CANFD2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000) @@ -247,7 +248,7 @@ #define USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) #define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000) -#ifdef CONFIG_MX6SL +#ifdef CONFIG_SOC_IMX6SL #define MSHC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000) #else #define MLB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000) @@ -264,7 +265,7 @@ #define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000) /* i.MX6SL/SLL */ #define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) -#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#if (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) #define ENET2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000) #else /* i.MX6SX */ @@ -276,7 +277,7 @@ #define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000) #define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000) #define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000) -#ifdef CONFIG_MX6SLL +#ifdef CONFIG_SOC_IMX6SLL #define IOMUXC_GPR_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000) #define IOMUXC_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) #endif @@ -284,17 +285,17 @@ #define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) #define MX6UL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) #define MX6ULL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define DEBUG_MONITOR_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) #else #define IP2APB_PERFMON3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) #endif #define IP2APB_TZASC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x50000) -#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#if (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) #define SCTR_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000) #define QSPI0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000) #define UART6_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000) -#elif defined(CONFIG_MX6SX) +#elif defined(CONFIG_SOC_IMX6SX) #define SAI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000) #define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000) #define SAI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000) @@ -317,7 +318,7 @@ /* i.MX6SLL */ #define MTR_MASTER_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000) -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define GIS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x04000) #define DCIC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x0C000) #define DCIC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x10000) @@ -340,7 +341,7 @@ #define PWM6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA8000) #define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000) #define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000) -#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#elif (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) #define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000) #define DCP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000) #define RNGB_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000) @@ -357,9 +358,9 @@ #define MX6SX_LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000) #define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000) -#if !(defined(CONFIG_MX6SX) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ - defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL)) +#if !(defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX6SLL) || \ + defined(CONFIG_SOC_IMX6SL)) #define IRAM_SIZE 0x00040000 #else #define IRAM_SIZE 0x00020000 @@ -578,7 +579,8 @@ struct src { #define IOMUXC_GPR12_LOS_LEVEL (0x1f << 4) struct iomuxc { -#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#if (defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL)) u8 reserved[0x4000]; #endif u32 gpr[14]; @@ -704,8 +706,9 @@ struct cspi_regs { #define MXC_CSPICON_POL 4 /* SCLK polarity */ #define MXC_CSPICON_SSPOL 12 /* SS polarity */ #define MXC_CSPICON_CTL 20 /* inactive state of SCLK */ -#if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \ - defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#if defined(CONFIG_SOC_IMX6SLL) || defined(CONFIG_SOC_IMX6SL) || \ + defined(CONFIG_SOC_IMX6DL) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL) #define MXC_SPI_BASE_ADDRESSES \ ECSPI1_BASE_ADDR, \ ECSPI2_BASE_ADDR, \ diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index 19d2f1d9c5..c0aa870b62 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -7,27 +7,27 @@ #define __ASM_ARCH_MX6_DDR_H__ #ifndef CONFIG_SPL_BUILD -#ifdef CONFIG_MX6Q +#ifdef CONFIG_SOC_IMX6Q #include "mx6q-ddr.h" #else -#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#if defined(CONFIG_SOC_IMX6DL) || defined(CONFIG_SOC_IMX6S) #include "mx6dl-ddr.h" #else -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #include "mx6sx-ddr.h" #else -#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#if defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) #include "mx6ul-ddr.h" #else -#ifdef CONFIG_MX6SL +#ifdef CONFIG_SOC_IMX6SL #include "mx6sl-ddr.h" #else #error "Please select cpu" -#endif /* CONFIG_MX6SL */ -#endif /* CONFIG_MX6UL */ -#endif /* CONFIG_MX6SX */ -#endif /* CONFIG_MX6DL or CONFIG_MX6S */ -#endif /* CONFIG_MX6Q */ +#endif /* CONFIG_SOC_IMX6SL */ +#endif /* CONFIG_SOC_IMX6UL */ +#endif /* CONFIG_SOC_IMX6SX */ +#endif /* CONFIG_SOC_IMX6DL or CONFIG_SOC_IMX6S */ +#endif /* CONFIG_SOC_IMX6Q */ #else enum { diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h index c2ce953206..5426fdb7a5 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h @@ -11,7 +11,7 @@ #define MX6_PAD_DECLARE(prefix, name, pco, mc, mm, sio, si, pc) \ prefix##name = IOMUX_PAD(pco, mc, mm, sio, si, pc) -#ifdef CONFIG_MX6QDL +#ifdef CONFIG_SOC_IMX6QDL enum { #define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \ MX6_PAD_DECLARE(MX6Q_PAD_,name, pco, mc, mm, sio, si, pc), @@ -21,30 +21,30 @@ enum { MX6_PAD_DECLARE(MX6DL_PAD_,name, pco, mc, mm, sio, si, pc), #include "mx6dl_pins.h" }; -#elif defined(CONFIG_MX6Q) +#elif defined(CONFIG_SOC_IMX6Q) enum { #define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \ MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc), #include "mx6q_pins.h" }; -#elif defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#elif defined(CONFIG_SOC_IMX6DL) || defined(CONFIG_SOC_IMX6S) enum { #define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \ MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc), #include "mx6dl_pins.h" }; -#elif defined(CONFIG_MX6SLL) +#elif defined(CONFIG_SOC_IMX6SLL) #include "mx6sll_pins.h" -#elif defined(CONFIG_MX6SL) +#elif defined(CONFIG_SOC_IMX6SL) #include "mx6sl_pins.h" -#elif defined(CONFIG_MX6SX) +#elif defined(CONFIG_SOC_IMX6SX) #include "mx6sx_pins.h" -#elif defined(CONFIG_MX6ULL) +#elif defined(CONFIG_SOC_IMX6ULL) #include "mx6ull_pins.h" -#elif defined(CONFIG_MX6UL) +#elif defined(CONFIG_SOC_IMX6UL) #include "mx6ul_pins.h" #else #error "Please select cpu" -#endif /* CONFIG_MX6Q */ +#endif /* CONFIG_SOC_IMX6Q */ #endif /*__ASM_ARCH_MX6_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6_plugin.S b/arch/arm/include/asm/arch-mx6/mx6_plugin.S index b7d1b20315..10a30678fa 100644 --- a/arch/arm/include/asm/arch-mx6/mx6_plugin.S +++ b/arch/arm/include/asm/arch-mx6/mx6_plugin.S @@ -43,7 +43,7 @@ plugin_start: adr r2, boot_data2 #ifdef CONFIG_NOR_BOOT -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX ldr r3, =ROM_VERSION_OFFSET ldr r4, [r3] cmp r4, #ROM_VERSION_TO10 @@ -64,12 +64,12 @@ plugin_start: before_calling_rom___pu_irom_hwcnfg_setup: ldr r3, =ROM_VERSION_OFFSET ldr r4, [r3] -#if defined(CONFIG_MX6SOLO) || defined(CONFIG_MX6DL) +#if defined(CONFIG_MX6SOLO) || defined(CONFIG_SOC_IMX6DL) ldr r3, =ROM_VERSION_TO12 cmp r4, r3 ldrge r3, =ROM_API_TABLE_BASE_ADDR_MX6DL_TO12 ldrlt r3, =ROM_API_TABLE_BASE_ADDR_LEGACY -#elif defined(CONFIG_MX6Q) +#elif defined(CONFIG_SOC_IMX6Q) ldr r3, =ROM_VERSION_TO15 cmp r4, r3 ldrge r3, =ROM_API_TABLE_BASE_ADDR_MX6DQ_TO15 diff --git a/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h index 1eb4b3c8b3..f82dc45f90 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h @@ -6,8 +6,8 @@ #ifndef __ASM_ARCH_MX6DLS_DDR_H__ #define __ASM_ARCH_MX6DLS_DDR_H__ -#ifndef CONFIG_MX6DL -#ifndef CONFIG_MX6S +#ifndef CONFIG_SOC_IMX6DL +#ifndef CONFIG_SOC_IMX6S #error "wrong CPU" #endif #endif diff --git a/arch/arm/include/asm/arch-mx6/mx6q-ddr.h b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h index 0aa94cffe5..a87c6b9ff8 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h @@ -6,7 +6,7 @@ #ifndef __ASM_ARCH_MX6Q_DDR_H__ #define __ASM_ARCH_MX6Q_DDR_H__ -#ifndef CONFIG_MX6Q +#ifndef CONFIG_SOC_IMX6Q #error "wrong CPU" #endif diff --git a/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h b/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h index c3c4d69818..9f3b41a3e8 100644 --- a/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARCH_MX6SL_DDR_H__ #define __ASM_ARCH_MX6SL_DDR_H__ -#ifndef CONFIG_MX6SL +#ifndef CONFIG_SOC_IMX6SL #error "wrong CPU" #endif diff --git a/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h b/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h index 2cc94aa4c7..8aa82db6a9 100644 --- a/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARCH_MX6SX_DDR_H__ #define __ASM_ARCH_MX6SX_DDR_H__ -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX #error "wrong CPU" #endif diff --git a/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h b/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h index 518b81208a..c07f1a9078 100644 --- a/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARCH_MX6UL_DDR_H__ #define __ASM_ARCH_MX6UL_DDR_H__ -#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#if !(defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) #error "wrong CPU" #endif diff --git a/arch/arm/include/asm/mach-imx/dma.h b/arch/arm/include/asm/mach-imx/dma.h index 0244947b6e..ec1d23d6c1 100644 --- a/arch/arm/include/asm/mach-imx/dma.h +++ b/arch/arm/include/asm/mach-imx/dma.h @@ -54,7 +54,7 @@ enum { MXS_DMA_CHANNEL_AHB_APBH_RESERVED1, MXS_MAX_DMA_CHANNELS, }; -#elif defined(CONFIG_MX6) || defined(CONFIG_MX7) +#elif defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7) enum { MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0, MXS_DMA_CHANNEL_AHB_APBH_GPMI1, diff --git a/arch/arm/include/asm/mach-imx/iomux-v3.h b/arch/arm/include/asm/mach-imx/iomux-v3.h index 0c0ccf4403..9931553f38 100644 --- a/arch/arm/include/asm/mach-imx/iomux-v3.h +++ b/arch/arm/include/asm/mach-imx/iomux-v3.h @@ -134,7 +134,7 @@ typedef u64 iomux_v3_cfg_t; #else -#ifdef CONFIG_MX6 +#ifdef CONFIG_SOC_IMX6 #define PAD_CTL_HYS (1 << 16) @@ -147,7 +147,8 @@ typedef u64 iomux_v3_cfg_t; #define PAD_CTL_ODE (1 << 11) -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL) #define PAD_CTL_SPEED_LOW (0 << 6) #else #define PAD_CTL_SPEED_LOW (1 << 6) @@ -257,7 +258,7 @@ void imx_iomux_gpio_get_function(unsigned int gpio, #endif /* macros for declaring and using pinmux array */ -#if defined(CONFIG_MX6QDL) +#if defined(CONFIG_SOC_IMX6QDL) #define IOMUX_PADS(x) (MX6Q_##x), (MX6DL_##x) #define SETUP_IOMUX_PAD(def) \ if (is_mx6dq() || is_mx6dqp()) { \ @@ -267,13 +268,13 @@ if (is_mx6dq() || is_mx6dqp()) { \ } #define SETUP_IOMUX_PADS(x) \ imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)/2) -#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) +#elif defined(CONFIG_SOC_IMX6Q) || defined(CONFIG_SOC_IMX6D) #define IOMUX_PADS(x) MX6Q_##x #define SETUP_IOMUX_PAD(def) \ imx_iomux_v3_setup_pad(MX6Q_##def); #define SETUP_IOMUX_PADS(x) \ imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)) -#elif defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#elif defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) #define IOMUX_PADS(x) MX6_##x #define SETUP_IOMUX_PAD(def) \ imx_iomux_v3_setup_pad(MX6_##def); diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h b/arch/arm/include/asm/mach-imx/mxc_i2c.h index 80018e4a14..bce661c6d3 100644 --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h @@ -59,7 +59,7 @@ struct mxc_i2c_bus { #endif }; -#if defined(CONFIG_MX6QDL) +#if defined(CONFIG_SOC_IMX6QDL) #define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \ struct i2c_pads_info mx6q_##name = { \ .scl = { \ diff --git a/arch/arm/include/asm/mach-imx/regs-apbh.h b/arch/arm/include/asm/mach-imx/regs-apbh.h index 4cc4abaf85..9283f0cc26 100644 --- a/arch/arm/include/asm/mach-imx/regs-apbh.h +++ b/arch/arm/include/asm/mach-imx/regs-apbh.h @@ -96,7 +96,7 @@ struct mxs_apbh_regs { mxs_reg_32(hw_apbh_version) }; -#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#elif (defined(CONFIG_MX28) || defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) struct mxs_apbh_regs { mxs_reg_32(hw_apbh_ctrl0) mxs_reg_32(hw_apbh_ctrl1) @@ -275,7 +275,7 @@ struct mxs_apbh_regs { #define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800 #define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000 #define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000 -#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#elif (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) #define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0 #define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0001 #define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0002 @@ -391,7 +391,7 @@ struct mxs_apbh_regs { #define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000 #endif -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#if (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) #define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16 #endif diff --git a/arch/arm/include/asm/mach-imx/regs-bch.h b/arch/arm/include/asm/mach-imx/regs-bch.h index c0f673cc33..9a0aaf8878 100644 --- a/arch/arm/include/asm/mach-imx/regs-bch.h +++ b/arch/arm/include/asm/mach-imx/regs-bch.h @@ -123,7 +123,7 @@ struct mxs_bch_regs { #define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24 #define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16) #define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16 -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#if (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) #define BCH_FLASHLAYOUT0_ECC0_MASK (0x1f << 11) #define BCH_FLASHLAYOUT0_ECC0_OFFSET 11 #else @@ -154,7 +154,7 @@ struct mxs_bch_regs { #define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16) #define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16 -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#if (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) #define BCH_FLASHLAYOUT1_ECCN_MASK (0x1f << 11) #define BCH_FLASHLAYOUT1_ECCN_OFFSET 11 #else diff --git a/arch/arm/include/asm/mach-imx/regs-lcdif.h b/arch/arm/include/asm/mach-imx/regs-lcdif.h index 38a2c6d4ee..e671e1f356 100644 --- a/arch/arm/include/asm/mach-imx/regs-lcdif.h +++ b/arch/arm/include/asm/mach-imx/regs-lcdif.h @@ -19,9 +19,9 @@ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */ mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */ -#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \ - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ +#if defined(CONFIG_MX28) || defined(CONFIG_SOC_IMX6SX) || \ + defined(CONFIG_SOC_IMX6SL) || defined(CONFIG_SOC_IMX6SLL) || \ + defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) || \ defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ defined(CONFIG_MX8M) mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */ @@ -58,9 +58,9 @@ struct mxs_lcdif_regs { #endif mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */ mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */ -#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \ - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ +#if defined(CONFIG_MX28) || defined(CONFIG_SOC_IMX6SX) || \ + defined(CONFIG_SOC_IMX6SL) || defined(CONFIG_SOC_IMX6SLL) || \ + defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) || \ defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ defined(CONFIG_MX8M) mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ @@ -70,11 +70,10 @@ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_debug0) /* 0x1f0/0x1d0 */ mxs_reg_32(hw_lcdif_debug1) /* 0x200/0x1e0 */ mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */ -#if defined(CONFIG_MX6SX) || \ - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ - defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ - defined(CONFIG_MX8M) +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6SL) || \ + defined(CONFIG_SOC_IMX6SLL) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_MX7) || \ + defined(CONFIG_MX7ULP) || defined(CONFIG_MX8M) mxs_reg_32(hw_lcdif_thres) mxs_reg_32(hw_lcdif_as_ctrl) mxs_reg_32(hw_lcdif_as_buf) diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index 96795e1814..361e383f5b 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -42,7 +42,7 @@ #define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP)) -#ifdef CONFIG_MX6 +#ifdef CONFIG_SOC_IMX6 #define IMX6_SRC_GPR10_BMODE BIT(28) #define IMX6_BMODE_MASK GENMASK(7, 0) @@ -70,7 +70,7 @@ enum imx6_bmode_emi { enum imx6_bmode { IMX6_BMODE_EMI, -#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#if defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) IMX6_BMODE_QSPI, IMX6_BMODE_RESERVED, #else @@ -94,7 +94,7 @@ static inline u8 imx6_is_bmode_from_gpr9(void) u32 imx6_src_get_boot_mode(void); void gpr_init(void); -#endif /* CONFIG_MX6 */ +#endif /* CONFIG_SOC_IMX6 */ u32 get_nr_cpus(void); u32 get_cpu_rev(void); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3aec89d440..ff4f692ae7 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -15,7 +15,7 @@ config GPT_TIMER config IMX_RDC bool "i.MX Resource domain controller driver" - depends on ARCH_MX6 || ARCH_MX7 + depends on ARCH_IMX6 || ARCH_MX7 help i.MX Resource domain controller is used to assign masters and peripherals to differet domains. This can be used to @@ -23,20 +23,20 @@ config IMX_RDC config IMX_BOOTAUX bool "Support boot auxiliary core" - depends on ARCH_MX7 || ARCH_MX6 + depends on ARCH_MX7 || ARCH_IMX6 help bootaux [addr] to boot auxiliary core. config USE_IMXIMG_PLUGIN bool "Use imximage plugin code" - depends on ARCH_MX7 || ARCH_MX6 + depends on ARCH_MX7 || ARCH_IMX6 help i.MX6/7 supports DCD and Plugin. Enable this configuration to use Plugin, otherwise DCD will be used. config SECURE_BOOT bool "Support i.MX HAB features" - depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5 + depends on ARCH_MX7 || ARCH_IMX6 || ARCH_MX5 select FSL_CAAM if HAS_CAAM imply CMD_DEKBLOB help @@ -46,7 +46,7 @@ config SECURE_BOOT config CMD_BMODE bool "Support the 'bmode' command" default y - depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5 + depends on ARCH_MX7 || ARCH_IMX6 || ARCH_MX5 help This enables the 'bmode' (bootmode) command for forcing a boot from specific media. @@ -73,7 +73,7 @@ config CMD_HDMIDETECT config NXP_BOARD_REVISION bool "Read NXP board revision from fuses" - depends on ARCH_MX6 || ARCH_MX7 + depends on ARCH_IMX6 || ARCH_MX7 help NXP boards based on i.MX6/7 contain the board revision information stored in the fuses. Select this option if you want to be able to diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 95a542fa01..494534fa25 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -138,7 +138,7 @@ targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-sp obj-$(CONFIG_ARM64) += sip.o obj-$(CONFIG_MX5) += mx5/ -obj-$(CONFIG_MX6) += mx6/ +obj-$(CONFIG_SOC_IMX6) += mx6/ obj-$(CONFIG_MX7) += mx7/ obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/ obj-$(CONFIG_MX8M) += mx8m/ diff --git a/arch/arm/mach-imx/cache.c b/arch/arm/mach-imx/cache.c index c5279a7c8a..c74421b0d8 100644 --- a/arch/arm/mach-imx/cache.c +++ b/arch/arm/mach-imx/cache.c @@ -84,7 +84,7 @@ void v7_outer_cache_enable(void) * double linefill feature. This is the default behavior. */ -#ifndef CONFIG_MX6Q +#ifndef CONFIG_SOC_IMX6Q val |= 0x40800000; #endif writel(val, &pl310->pl310_prefetch_ctrl); diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 4d4d434906..2ab3db019b 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -85,7 +85,7 @@ u32 get_imx_reset_cause(void) } #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) +#if defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) #if defined(CONFIG_MX53) #define MEMCTL_BASE ESDCTL_BASE_ADDR #else @@ -130,7 +130,7 @@ unsigned imx_ddr_size(void) bits += ESD_MMDC_CTL_GET_WIDTH(ctl); bits += ESD_MMDC_CTL_GET_CS1(ctl); - /* The MX6 can do only 3840 MiB of DRAM */ + /* The i.MX6 can do only 3840 MiB of DRAM */ if (bits == 32) return 0xf0000000; @@ -288,7 +288,7 @@ void arch_preboot_os(void) #endif #if defined(CONFIG_SATA) sata_remove(0); -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) disable_sata_clock(); #endif #endif diff --git a/arch/arm/mach-imx/init.c b/arch/arm/mach-imx/init.c index 0aa8295751..9e3aaed3ee 100644 --- a/arch/arm/mach-imx/init.c +++ b/arch/arm/mach-imx/init.c @@ -116,7 +116,7 @@ void boot_mode_apply(unsigned cfg_val) } #endif -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) u32 imx6_src_get_boot_mode(void) { if (imx6_is_bmode_from_gpr9()) diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index 94d660015d..2bfeb1fe7e 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -31,7 +31,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT; u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; -#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) +#if defined(CONFIG_SOC_IMX6SL) || defined(CONFIG_SOC_IMX6SLL) /* Check whether LVE bit needs to be set */ if (pad_ctrl & PAD_CTL_LVE) { pad_ctrl &= ~PAD_CTL_LVE; @@ -73,7 +73,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) #else if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) __raw_writel(pad_ctrl, base + pad_ctrl_ofs); -#if defined(CONFIG_MX6SLL) +#if defined(CONFIG_SOC_IMX6SLL) else if ((pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) clrbits_le32(base + pad_ctrl_ofs, PAD_CTL_IPD_BIT); #endif @@ -94,7 +94,7 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, int stride; int i; -#if defined(CONFIG_MX6QDL) +#if defined(CONFIG_SOC_IMX6QDL) stride = 2; if (!is_mx6dq() && !is_mx6dqp()) p += 1; diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index d4ce38db8d..f78ac2eaec 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -1,4 +1,4 @@ -if ARCH_MX6 +if ARCH_IMX6 config MX6_SMP select ARM_ERRATA_751472 @@ -7,66 +7,66 @@ config MX6_SMP select ARM_ERRATA_845369 bool -config MX6 - select ARM_ERRATA_743622 if !MX6UL && !MX6ULL - select GPT_TIMER if !MX6UL && !MX6ULL +config SOC_IMX6 + select ARM_ERRATA_743622 if !SOC_IMX6UL && !SOC_IMX6ULL + select GPT_TIMER if !SOC_IMX6UL && !SOC_IMX6ULL bool default y imply CMD_FUSE -config MX6D +config SOC_IMX6D select HAS_CAAM select MX6_SMP bool -config MX6DL +config SOC_IMX6DL select HAS_CAAM select MX6_SMP bool -config MX6Q +config SOC_IMX6Q select HAS_CAAM select MX6_SMP bool -config MX6QDL +config SOC_IMX6QDL select HAS_CAAM select MX6_SMP bool -config MX6S +config SOC_IMX6S select HAS_CAAM bool -config MX6SL +config SOC_IMX6SL bool -config MX6SX +config SOC_IMX6SX select HAS_CAAM select ROM_UNIFIED_SECTIONS bool -config MX6SLL +config SOC_IMX6SLL select ROM_UNIFIED_SECTIONS bool -config MX6UL +config SOC_IMX6UL select HAS_CAAM select SYS_L2CACHE_OFF select ROM_UNIFIED_SECTIONS select SYSCOUNTER_TIMER bool -config MX6UL_LITESOM +config SOC_IMX6UL_LITESOM bool - select MX6UL + select SOC_IMX6UL select DM select DM_THERMAL select SUPPORT_SPL -config MX6UL_OPOS6UL +config SOC_IMX6UL_OPOS6UL bool - select MX6UL + select SOC_IMX6UL select BOARD_LATE_INIT select DM select DM_GPIO @@ -74,7 +74,7 @@ config MX6UL_OPOS6UL select DM_THERMAL select SUPPORT_SPL -config MX6ULL +config SOC_IMX6ULL select SYS_L2CACHE_OFF select ROM_UNIFIED_SECTIONS select SYSCOUNTER_TIMER @@ -89,13 +89,13 @@ config MX6_DDRCAL If unsure, say N. choice - prompt "MX6 board select" + prompt "i.MX6 board select" optional config TARGET_ADVANTECH_DMS_BA16 bool "Advantech dms-ba16" select BOARD_LATE_INIT - select MX6Q + select SOC_IMX6Q imply CMD_SATA config TARGET_APALIS_IMX6 @@ -120,7 +120,7 @@ config TARGET_ARISTAINETOS2B config TARGET_CGTQMX6EVAL bool "cgtqmx6eval" - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select SUPPORT_SPL select DM @@ -129,7 +129,7 @@ config TARGET_CGTQMX6EVAL config TARGET_CM_FX6 bool "CM-FX6" select SUPPORT_SPL - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select DM select DM_SERIAL @@ -145,7 +145,7 @@ config TARGET_COLIBRI_IMX6 config TARGET_DHCOMIMX6 bool "dh_imx6" - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select BOARD_EARLY_INIT_F select SUPPORT_SPL @@ -166,21 +166,21 @@ config TARGET_EMBESTMX6BOARDS config TARGET_GE_B450V3 bool "General Electric B450v3" select BOARD_LATE_INIT - select MX6Q + select SOC_IMX6Q config TARGET_GE_B650V3 bool "General Electric B650v3" select BOARD_LATE_INIT - select MX6Q + select SOC_IMX6Q config TARGET_GE_B850V3 bool "General Electric B850v3" select BOARD_LATE_INIT - select MX6Q + select SOC_IMX6Q config TARGET_GW_VENTANA bool "gw_ventana" - select MX6QDL + select SOC_IMX6QDL select SUPPORT_SPL imply CMD_SATA imply CMD_SPL @@ -192,12 +192,12 @@ config TARGET_KOSAGI_NOVENA config TARGET_MCCMON6 bool "mccmon6" - select MX6QDL + select SOC_IMX6QDL select SUPPORT_SPL config TARGET_MX6CUBOXI bool "Solid-run mx6 boards" - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select SUPPORT_SPL @@ -228,7 +228,7 @@ config TARGET_MX6QARM2 config TARGET_MX6Q_ENGICAM bool "Support Engicam i.Core(RQS)" select BOARD_LATE_INIT - select MX6QDL + select SOC_IMX6QDL select OF_CONTROL select SPL_OF_LIBFDT select DM @@ -245,7 +245,7 @@ config TARGET_MX6Q_ENGICAM config TARGET_MX6SABREAUTO bool "mx6sabreauto" - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select SUPPORT_SPL select DM @@ -254,7 +254,7 @@ config TARGET_MX6SABREAUTO config TARGET_MX6SABRESD bool "mx6sabresd" - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select SUPPORT_SPL select DM @@ -263,20 +263,20 @@ config TARGET_MX6SABRESD config TARGET_MX6SLEVK bool "mx6slevk" - select MX6SL + select SOC_IMX6SL select SUPPORT_SPL config TARGET_MX6SLLEVK bool "mx6sll evk" select BOARD_LATE_INIT - select MX6SLL + select SOC_IMX6SLL select DM select DM_THERMAL config TARGET_MX6SXSABRESD bool "mx6sxsabresd" select BOARD_LATE_INIT - select MX6SX + select SOC_IMX6SX select SUPPORT_SPL select DM select DM_THERMAL @@ -285,7 +285,7 @@ config TARGET_MX6SXSABRESD config TARGET_MX6SXSABREAUTO bool "mx6sxsabreauto" select BOARD_LATE_INIT - select MX6SX + select SOC_IMX6SX select DM select DM_THERMAL select BOARD_EARLY_INIT_F @@ -293,7 +293,7 @@ config TARGET_MX6SXSABREAUTO config TARGET_MX6UL_9X9_EVK bool "mx6ul_9x9_evk" select BOARD_LATE_INIT - select MX6UL + select SOC_IMX6UL select DM select DM_THERMAL select SUPPORT_SPL @@ -301,7 +301,7 @@ config TARGET_MX6UL_9X9_EVK config TARGET_MX6UL_14X14_EVK select BOARD_LATE_INIT bool "mx6ul_14x14_evk" - select MX6UL + select SOC_IMX6UL select DM select DM_THERMAL select SUPPORT_SPL @@ -309,7 +309,7 @@ config TARGET_MX6UL_14X14_EVK config TARGET_MX6UL_ENGICAM bool "Support Engicam GEAM6UL/Is.IoT" select BOARD_LATE_INIT - select MX6UL + select SOC_IMX6UL select OF_CONTROL select DM select DM_ETH @@ -326,7 +326,7 @@ config TARGET_MX6UL_ENGICAM config TARGET_MX6ULL_14X14_EVK bool "Support mx6ull_14x14_evk" select BOARD_LATE_INIT - select MX6ULL + select SOC_IMX6ULL select DM select DM_THERMAL @@ -339,7 +339,7 @@ config TARGET_NITROGEN6X config TARGET_OPOS6ULDEV bool "Armadeus OPOS6ULDev board" - select MX6UL_OPOS6UL + select SOC_IMX6UL_OPOS6UL config TARGET_OT1200 bool "Bachmann OT1200" @@ -348,12 +348,12 @@ config TARGET_OT1200 config TARGET_PICO_IMX6UL bool "PICO-IMX6UL-EMMC" - select MX6UL + select SOC_IMX6UL config TARGET_LITEBOARD bool "Grinn liteBoard (i.MX6UL)" select BOARD_LATE_INIT - select MX6UL_LITESOM + select SOC_IMX6UL_LITESOM config TARGET_PLATINUM_PICON bool "platinum-picon" @@ -370,7 +370,7 @@ config TARGET_PCM058 config TARGET_PFLA02 bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad" - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select SUPPORT_SPL @@ -393,7 +393,7 @@ config TARGET_TQMA6 config TARGET_UDOO bool "udoo" - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select SUPPORT_SPL @@ -401,32 +401,32 @@ config TARGET_UDOO_NEO bool "UDOO Neo" select BOARD_LATE_INIT select SUPPORT_SPL - select MX6SX + select SOC_IMX6SX select DM select DM_THERMAL config TARGET_SAMTEC_VINING_2000 bool "samtec VIN|ING 2000" select BOARD_LATE_INIT - select MX6SX + select SOC_IMX6SX select DM select DM_THERMAL config TARGET_WANDBOARD bool "wandboard" - select MX6QDL + select SOC_IMX6QDL select BOARD_LATE_INIT select SUPPORT_SPL config TARGET_WARP bool "WaRP" - select MX6SL + select SOC_IMX6SL select BOARD_LATE_INIT config TARGET_XPRESS bool "CCV xPress" select BOARD_LATE_INIT - select MX6UL + select SOC_IMX6UL select DM select DM_THERMAL select SUPPORT_SPL diff --git a/arch/arm/mach-imx/mx6/Makefile b/arch/arm/mach-imx/mx6/Makefile index c183eb4a2f..37a5d5d422 100644 --- a/arch/arm/mach-imx/mx6/Makefile +++ b/arch/arm/mach-imx/mx6/Makefile @@ -10,5 +10,5 @@ obj-y := soc.o clock.o obj-$(CONFIG_SPL_BUILD) += ddr.o obj-$(CONFIG_MP) += mp.o -obj-$(CONFIG_MX6UL_LITESOM) += litesom.o -obj-$(CONFIG_MX6UL_OPOS6UL) += opos6ul.o +obj-$(CONFIG_SOC_IMX6UL_LITESOM) += litesom.o +obj-$(CONFIG_SOC_IMX6UL_OPOS6UL) += opos6ul.o diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c index 71a9e6bca0..1a14d95822 100644 --- a/arch/arm/mach-imx/mx6/clock.c +++ b/arch/arm/mach-imx/mx6/clock.c @@ -41,7 +41,7 @@ void enable_ocotp_clk(unsigned char enable) #ifdef CONFIG_NAND_MXS void setup_gpmi_io_clk(u32 cfg) { - /* Disable clocks per ERR007177 from MX6 errata */ + /* Disable clocks per ERR007177 from i.MX6 errata */ clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | @@ -49,7 +49,7 @@ void setup_gpmi_io_clk(u32 cfg) MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK); -#if defined(CONFIG_MX6SX) +#if defined(CONFIG_SOC_IMX6SX) clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK); clrsetbits_le32(&imx_ccm->cs2cdr, @@ -92,7 +92,7 @@ void enable_usboh3_clk(unsigned char enable) } -#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX) +#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_SOC_IMX6SX) void enable_enet_clk(unsigned char enable) { u32 mask, *addr; @@ -949,7 +949,7 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq) reg &= ~BM_ANADIG_PLL_ENET_BYPASS; writel(reg, &anatop->pll_enet); -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX /* Disable enet system clcok before switching clock parent */ reg = readl(&imx_ccm->CCGR3); reg &= ~MXC_CCM_CCGR3_ENET_MASK; @@ -1312,7 +1312,7 @@ int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -#ifndef CONFIG_MX6SX +#ifndef CONFIG_SOC_IMX6SX void enable_ipu_clock(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -1328,8 +1328,8 @@ void enable_ipu_clock(void) } #endif -#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \ - defined(CONFIG_MX6S) +#if defined(CONFIG_SOC_IMX6Q) || defined(CONFIG_SOC_IMX6D) || \ + defined(CONFIG_SOC_IMX6DL) || defined(CONFIG_SOC_IMX6S) static void disable_ldb_di_clock_sources(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c index 43b77cfa41..f8f50b2bf9 100644 --- a/arch/arm/mach-imx/mx6/ddr.c +++ b/arch/arm/mach-imx/mx6/ddr.c @@ -572,8 +572,8 @@ int mmdc_do_dqs_calibration(struct mx6_ddr_sysinfo const *sysinfo) } #endif -#if defined(CONFIG_MX6SX) -/* Configure MX6SX mmdc iomux */ +#if defined(CONFIG_SOC_IMX6SX) +/* Configure i.MX6SX mmdc iomux */ void mx6sx_dram_iocfg(unsigned width, const struct mx6sx_iomux_ddr_regs *ddr, const struct mx6sx_iomux_grp_regs *grp) @@ -631,7 +631,7 @@ void mx6sx_dram_iocfg(unsigned width, } #endif -#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#if defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) void mx6ul_dram_iocfg(unsigned width, const struct mx6ul_iomux_ddr_regs *ddr, const struct mx6ul_iomux_grp_regs *grp) @@ -675,7 +675,7 @@ void mx6ul_dram_iocfg(unsigned width, } #endif -#if defined(CONFIG_MX6SL) +#if defined(CONFIG_SOC_IMX6SL) void mx6sl_dram_iocfg(unsigned width, const struct mx6sl_iomux_ddr_regs *ddr, const struct mx6sl_iomux_grp_regs *grp) @@ -730,7 +730,8 @@ void mx6sl_dram_iocfg(unsigned width, } #endif -#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) +#if defined(CONFIG_SOC_IMX6QDL) || defined(CONFIG_SOC_IMX6Q) || \ + defined(CONFIG_SOC_IMX6D) /* Configure MX6DQ mmdc iomux */ void mx6dq_dram_iocfg(unsigned width, const struct mx6dq_iomux_ddr_regs *ddr, @@ -808,7 +809,8 @@ void mx6dq_dram_iocfg(unsigned width, } #endif -#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#if defined(CONFIG_SOC_IMX6QDL) || defined(CONFIG_SOC_IMX6DL) || \ + defined(CONFIG_SOC_IMX6S) /* Configure MX6SDL mmdc iomux */ void mx6sdl_dram_iocfg(unsigned width, const struct mx6sdl_iomux_ddr_regs *ddr, @@ -1218,14 +1220,14 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl()) mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR; - /* Limit mem_speed for MX6D/MX6Q */ + /* Limit mem_speed for i.MX6D/i.MX6Q */ if (is_mx6dq() || is_mx6dqp()) { if (mem_speed > 1066) mem_speed = 1066; /* 1066 MT/s */ tcwl = 4; } - /* Limit mem_speed for MX6S/MX6DL */ + /* Limit mem_speed for i.MX6S/i.MX6DL */ else { if (mem_speed > 800) mem_speed = 800; /* 800 MT/s */ @@ -1235,7 +1237,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, clock = mem_speed / 2; /* - * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports + * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but i.MX6D/Q supports * up to 528 MHz, so reduce the clock to fit chip specs */ if (is_mx6dq() || is_mx6dqp()) { diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index 9b3d8f69b2..1b9f26270f 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -528,7 +528,7 @@ int board_postclk_init(void) const struct boot_mode soc_boot_modes[] = { {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, /* reserved value should start rom usb */ -#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#if defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) {"usb", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, #else {"usb", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)}, @@ -565,9 +565,9 @@ void s_init(void) if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sll()) return; - /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs + /* Due to hardware limitation, on i.MX6Q we need to gate/ungate all PFDs * to make sure PFD is working right, otherwise, PFDs may - * not output clock after reset, MX6DL and MX6SL have added 396M pfd + * not output clock after reset, i.MX6DL and i.MX6SL have added 396M pfd * workaround in ROM code, as bus clock need it */ diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c index b2521b2101..c084acb1ca 100644 --- a/arch/arm/mach-imx/spl.c +++ b/arch/arm/mach-imx/spl.c @@ -19,7 +19,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) /* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */ u32 spl_boot_device(void) { @@ -61,7 +61,7 @@ u32 spl_boot_device(void) case IMX6_BMODE_RESERVED: return BOOT_DEVICE_BOARD; /* SATA: See 8.5.4, Table 8-20 */ -#if !defined(CONFIG_MX6UL) && !defined(CONFIG_MX6ULL) +#if !defined(CONFIG_SOC_IMX6UL) && !defined(CONFIG_SOC_IMX6ULL) case IMX6_BMODE_SATA: return BOOT_DEVICE_SATA; #endif @@ -121,7 +121,7 @@ u32 spl_boot_device(void) return BOOT_DEVICE_NONE; } } -#endif /* CONFIG_MX6 || CONFIG_MX7 || CONFIG_MX8M */ +#endif /* CONFIG_SOC_IMX6 || CONFIG_MX7 || CONFIG_MX8M */ #ifdef CONFIG_SPL_USB_GADGET_SUPPORT int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) @@ -213,7 +213,7 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) #endif -#if defined(CONFIG_MX6) && defined(CONFIG_SPL_OS_BOOT) +#if defined(CONFIG_SOC_IMX6) && defined(CONFIG_SPL_OS_BOOT) int dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; diff --git a/arch/arm/mach-imx/timer.c b/arch/arm/mach-imx/timer.c index 69dbf3c2ce..ced5c9e961 100644 --- a/arch/arm/mach-imx/timer.c +++ b/arch/arm/mach-imx/timer.c @@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR; static inline int gpt_has_clk_source_osc(void) { -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) || is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sll()) diff --git a/board/bachmann/ot1200/ot1200_spl.c b/board/bachmann/ot1200/ot1200_spl.c index f3dff95710..62c5e3fa5d 100644 --- a/board/bachmann/ot1200/ot1200_spl.c +++ b/board/bachmann/ot1200/ot1200_spl.c @@ -10,7 +10,7 @@ DECLARE_GLOBAL_DATA_PTR; -/* Configure MX6Q/DUAL mmdc DDR io registers */ +/* Configure i.MX6Q/DUAL mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs ot1200_ddr_ioregs = { /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 48ohm */ .dram_sdclk_0 = 0x00000028, @@ -46,7 +46,7 @@ static struct mx6dq_iomux_ddr_regs ot1200_ddr_ioregs = { .dram_dqm7 = 0x00000028, }; -/* Configure MX6Q/DUAL mmdc GRP io registers */ +/* Configure i.MX6Q/DUAL mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs ot1200_grp_ioregs = { /* DDR3 */ .grp_ddr_type = 0x000c0000, diff --git a/board/barco/platinum/spl_picon.c b/board/barco/platinum/spl_picon.c index f49adf0329..182e5db708 100644 --- a/board/barco/platinum/spl_picon.c +++ b/board/barco/platinum/spl_picon.c @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR; #undef RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */ -/* Configure MX6Q/DUAL mmdc DDR io registers */ +/* Configure i.MX6Q/DUAL mmdc DDR io registers */ struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ .dram_sdclk_0 = 0x00020030, @@ -61,7 +61,7 @@ struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { .dram_dqm7 = 0x00020030, }; -/* Configure MX6Q/DUAL mmdc GRP io registers */ +/* Configure i.MX6Q/DUAL mmdc GRP io registers */ struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { /* DDR3 */ .grp_ddr_type = 0x000c0000, diff --git a/board/barco/platinum/spl_titanium.c b/board/barco/platinum/spl_titanium.c index c27fb4836a..77117abd7a 100644 --- a/board/barco/platinum/spl_titanium.c +++ b/board/barco/platinum/spl_titanium.c @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR; #undef RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */ -/* Configure MX6Q/DUAL mmdc DDR io registers */ +/* Configure i.MX6Q/DUAL mmdc DDR io registers */ struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ .dram_sdclk_0 = 0x00020030, @@ -61,7 +61,7 @@ struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_dqm7 = 0x00020030, }; -/* Configure MX6Q/DUAL mmdc GRP io registers */ +/* Configure i.MX6Q/DUAL mmdc GRP io registers */ struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { /* DDR3 */ .grp_ddr_type = 0x000c0000, diff --git a/board/boundary/nitrogen6x/ddr-setup.cfg b/board/boundary/nitrogen6x/ddr-setup.cfg index 2748d40084..a018bbacb4 100644 --- a/board/boundary/nitrogen6x/ddr-setup.cfg +++ b/board/boundary/nitrogen6x/ddr-setup.cfg @@ -16,10 +16,10 @@ /* * DDR3 settings - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), - * memory bus width: 64 bits x16/x32/x64 - * MX6DL ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 64 bits x16/x32/x64 + * SOC_IMX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), + * memory bus width: 64 bits x16/x32/x64 + * SOC_IMX6DL ddr is limited to 800 MHz(400 MHz clock) + * memory bus width: 64 bits x16/x32/x64 * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) * memory bus width: 32 bits x16/x32 */ diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 673de03071..9dc6bd4785 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -607,7 +607,7 @@ int board_init(void) cm_fx6_setup_display(); - /* This should be done in the MMC driver when MX6 has a clock driver */ + /* This should be done in the MMC driver when i.MX6 has a clock driver */ #ifdef CONFIG_FSL_ESDHC if (IS_ENABLED(CONFIG_BLK)) { int i; @@ -628,9 +628,9 @@ int board_late_init(void) int err; if (is_mx6dq()) - env_set("board_rev", "MX6Q"); + env_set("board_rev", "i.MX6Q"); else if (is_mx6dl()) - env_set("board_rev", "MX6DL"); + env_set("board_rev", "i.MX6DL"); err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0); if (err) diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c index 1647b61100..47900e85c1 100644 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c @@ -756,9 +756,9 @@ int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (is_mx6dq()) - env_set("board_rev", "MX6Q"); + env_set("board_rev", "i.MX6Q"); else - env_set("board_rev", "MX6DL"); + env_set("board_rev", "i.MX6DL"); #endif return 0; diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c index b00d0e4b6d..19e8ed7223 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6.c +++ b/board/dhelectronics/dh_imx6/dh_imx6.c @@ -245,8 +245,8 @@ int board_mmc_init(bd_t *bis) static void setup_usb(void) { /* - * Set daisy chain for otg_pin_id on MX6Q. - * For MX6DL, this bit is reserved. + * Set daisy chain for otg_pin_id on i.MX6Q. + * For i.MX6DL, this bit is reserved. */ imx_iomux_set_gpr_register(1, 13, 1, 0); } diff --git a/board/engicam/common/spl.c b/board/engicam/common/spl.c index 6e2389dd4b..1f50348c36 100644 --- a/board/engicam/common/spl.c +++ b/board/engicam/common/spl.c @@ -30,10 +30,10 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) static iomux_v3_cfg_t const uart_pads[] = { -#ifdef CONFIG_MX6QDL +#ifdef CONFIG_SOC_IMX6QDL IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -#elif CONFIG_MX6UL +#elif CONFIG_SOC_IMX6UL IOMUX_PADS(PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL)), IOMUX_PADS(PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL)), #endif @@ -92,7 +92,7 @@ int spl_start_uboot(void) } #endif -#ifdef CONFIG_MX6QDL +#ifdef CONFIG_SOC_IMX6QDL /* * Driving strength: * 0x30 == 40 Ohm @@ -101,7 +101,7 @@ int spl_start_uboot(void) #define IMX6DQ_DRIVE_STRENGTH 0x30 #define IMX6SDL_DRIVE_STRENGTH 0x28 -/* configure MX6Q/DUAL mmdc DDR io registers */ +/* configure i.MX6Q/DUAL mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH, .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH, @@ -131,7 +131,7 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH, }; -/* configure MX6Q/DUAL mmdc GRP io registers */ +/* configure i.MX6Q/DUAL mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { .grp_b0ds = IMX6DQ_DRIVE_STRENGTH, .grp_b1ds = IMX6DQ_DRIVE_STRENGTH, @@ -293,9 +293,9 @@ static struct mx6_ddr_sysinfo mem_s = { .rst_to_cke = 0x23, .sde_to_rst = 0x10, }; -#endif /* CONFIG_MX6QDL */ +#endif /* CONFIG_SOC_IMX6QDL */ -#ifdef CONFIG_MX6UL +#ifdef CONFIG_SOC_IMX6UL static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { .grp_addds = 0x00000030, .grp_ddrmode_ctl = 0x00020000, @@ -360,13 +360,13 @@ static struct mx6_ddr3_cfg mem_ddr = { .trcmin = 4875, .trasmin = 3500, }; -#endif /* CONFIG_MX6UL */ +#endif /* CONFIG_SOC_IMX6UL */ static void ccgr_init(void) { struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; -#ifdef CONFIG_MX6QDL +#ifdef CONFIG_SOC_IMX6QDL writel(0x00003F3F, &ccm->CCGR0); writel(0x0030FC00, &ccm->CCGR1); writel(0x000FC000, &ccm->CCGR2); @@ -374,7 +374,7 @@ static void ccgr_init(void) writel(0xFF00F300, &ccm->CCGR4); writel(0x0F0000C3, &ccm->CCGR5); writel(0x000003CC, &ccm->CCGR6); -#elif CONFIG_MX6UL +#elif CONFIG_SOC_IMX6UL writel(0x00c03f3f, &ccm->CCGR0); writel(0xfcffff00, &ccm->CCGR1); writel(0x0cffffcc, &ccm->CCGR2); @@ -387,7 +387,7 @@ static void ccgr_init(void) static void spl_dram_init(void) { -#ifdef CONFIG_MX6QDL +#ifdef CONFIG_SOC_IMX6QDL if (is_mx6solo()) { mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs); mx6_dram_cfg(&mem_s, &mx6dl_mmdc_calib, &mt41j256); @@ -398,7 +398,7 @@ static void spl_dram_init(void) mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs); mx6_dram_cfg(&mem_q, &mx6dq_mmdc_calib, &mt41j256); } -#elif CONFIG_MX6UL +#elif CONFIG_SOC_IMX6UL mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr); #endif diff --git a/board/freescale/mx6memcal/spl.c b/board/freescale/mx6memcal/spl.c index b4b50db772..b08def69aa 100644 --- a/board/freescale/mx6memcal/spl.c +++ b/board/freescale/mx6memcal/spl.c @@ -54,7 +54,7 @@ static iomux_v3_cfg_t const uart_pads[] = { #define DRAM_DRIVE_STRENGTH \ (CONFIG_DRAM_DRIVE_STRENGTH << 3) -/* configure MX6Q/DUAL mmdc DDR io registers */ +/* configure i.MX6Q/DUAL mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs const mx6dq_ddr_ioregs = { /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ .dram_sdclk_0 = DDR_ODT + DRAM_DRIVE_STRENGTH, @@ -91,7 +91,7 @@ static struct mx6dq_iomux_ddr_regs const mx6dq_ddr_ioregs = { .dram_dqm7 = DDR_ODT + DRAM_DRIVE_STRENGTH, }; -/* configure MX6Q/DUAL mmdc GRP io registers */ +/* configure i.MX6Q/DUAL mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs const mx6dq_grp_ioregs = { /* DDR3 */ .grp_ddr_type = GRP_DDRTYPE, @@ -426,7 +426,7 @@ void board_init_f(ulong dummy) reset_cpu(0); } } -#ifdef CONFIG_MX6SL +#ifdef CONFIG_SOC_IMX6SL mx6sl_dram_iocfg(CONFIG_DDRWIDTH, &mx6sl_ddr_ioregs, &mx6sl_grp_ioregs); #else diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index 8cb5ac5940..22aaa5ebac 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { -#if defined(CONFIG_MX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \ +#if defined(CONFIG_SOC_IMX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \ defined(CONFIG_DDR_32BIT) gd->ram_size = ((phys_size_t)CONFIG_DDR_MB * 1024 * 1024) / 2; #else @@ -278,10 +278,10 @@ int board_init(void) int checkboard(void) { -#ifdef CONFIG_MX6DL - puts("Board: MX6DL-Armadillo2\n"); +#ifdef CONFIG_SOC_IMX6DL + puts("Board: i.MX6DL-Armadillo2\n"); #else - puts("Board: MX6Q-Armadillo2\n"); + puts("Board: i.MX6Q-Armadillo2\n"); #endif return 0; diff --git a/board/freescale/mx6sabreauto/mx6sabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c index 52b016b91d..d168c8348a 100644 --- a/board/freescale/mx6sabreauto/mx6sabreauto.c +++ b/board/freescale/mx6sabreauto/mx6sabreauto.c @@ -661,11 +661,11 @@ int board_late_init(void) env_set("board_name", "SABREAUTO"); if (is_mx6dqp()) - env_set("board_rev", "MX6QP"); + env_set("board_rev", "i.MX6QP"); else if (is_mx6dq()) - env_set("board_rev", "MX6Q"); + env_set("board_rev", "i.MX6Q"); else if (is_mx6sdl()) - env_set("board_rev", "MX6DL"); + env_set("board_rev", "i.MX6DL"); #endif return 0; @@ -673,7 +673,7 @@ int board_late_init(void) int checkboard(void) { - printf("Board: MX6Q-Sabreauto rev%c\n", nxp_board_rev_string()); + printf("Board: i.MX6Q-Sabreauto rev%c\n", nxp_board_rev_string()); return 0; } diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index d75dd88dbc..d98ce42497 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -706,11 +706,11 @@ int board_late_init(void) env_set("board_name", "SABRESD"); if (is_mx6dqp()) - env_set("board_rev", "MX6QP"); + env_set("board_rev", "i.MX6QP"); else if (is_mx6dq()) - env_set("board_rev", "MX6Q"); + env_set("board_rev", "i.MX6Q"); else if (is_mx6sdl()) - env_set("board_rev", "MX6DL"); + env_set("board_rev", "i.MX6DL"); #endif return 0; @@ -718,7 +718,7 @@ int board_late_init(void) int checkboard(void) { - puts("Board: MX6-SabreSD\n"); + puts("Board: i.MX6-SabreSD\n"); return 0; } diff --git a/board/freescale/mx6sllevk/mx6sllevk.c b/board/freescale/mx6sllevk/mx6sllevk.c index 33aada179f..8873413739 100644 --- a/board/freescale/mx6sllevk/mx6sllevk.c +++ b/board/freescale/mx6sllevk/mx6sllevk.c @@ -115,7 +115,7 @@ int board_late_init(void) int checkboard(void) { - puts("Board: MX6SLL EVK\n"); + puts("Board: i.MX6SLL EVK\n"); return 0; } diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c index 83473d80b0..b60892a730 100644 --- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c +++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c @@ -356,7 +356,7 @@ int board_late_init(void) int checkboard(void) { - puts("Board: MX6SX SABRE AUTO\n"); + puts("Board: i.MX6SX SABRE AUTO\n"); return 0; } diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 6c135130c9..9d82d68a43 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -341,7 +341,7 @@ int board_late_init(void) int checkboard(void) { - printf("Board: MX6SX SABRE SDB rev%c\n", nxp_board_rev_string()); + printf("Board: i.MX6SX SABRE SDB rev%c\n", nxp_board_rev_string()); return 0; } diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README index 1edccf688c..902d048dbc 100644 --- a/board/freescale/mx6ul_14x14_evk/README +++ b/board/freescale/mx6ul_14x14_evk/README @@ -1,7 +1,7 @@ -How to use U-Boot on Freescale MX6UL 14x14 EVK ------------------------------------------------ +How to use U-Boot on Freescale i.MX6UL 14x14 EVK +------------------------------------------------ -- Build U-Boot for MX6UL 14x14 EVK: +- Build U-Boot for i.MX6UL 14x14 EVK: $ make mrproper $ make mx6ul_14x14_evk_defconfig diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index a7b0fa86e0..071e60c6df 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -688,9 +688,9 @@ int board_late_init(void) int checkboard(void) { if (is_mx6ul_9x9_evk()) - puts("Board: MX6UL 9x9 EVK\n"); + puts("Board: i.MX6UL 9x9 EVK\n"); else - puts("Board: MX6UL 14x14 EVK\n"); + puts("Board: i.MX6UL 14x14 EVK\n"); return 0; } diff --git a/board/freescale/mx6ullevk/README b/board/freescale/mx6ullevk/README index d5c8770863..786adbb8b5 100644 --- a/board/freescale/mx6ullevk/README +++ b/board/freescale/mx6ullevk/README @@ -1,11 +1,11 @@ -How to use U-Boot on Freescale MX6ULL 14x14 EVK ----------------------------------------------- +How to use U-Boot on Freescale i.MX6ULL 14x14 EVK +------------------------------------------------- - First make sure you have installed the dtc package (device tree compiler): $ sudo apt-get install device-tree-compiler -- Build U-Boot for MX6ULL 14x14 EVK: +- Build U-Boot for i.MX6ULL 14x14 EVK: $ make mrproper $ make mx6ull_14x14_evk_defconfig diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c index cebcec738f..dc9e30bb3e 100644 --- a/board/freescale/mx6ullevk/mx6ullevk.c +++ b/board/freescale/mx6ullevk/mx6ullevk.c @@ -93,7 +93,7 @@ int board_late_init(void) int checkboard(void) { - puts("Board: MX6ULL 14x14 EVK\n"); + puts("Board: i.MX6ULL 14x14 EVK\n"); return 0; } diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index bdbe5e7027..724466c9f0 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; #define GSC_EEPROM_DDR_SIZE 0x2B /* enum (512,1024,2048) MB */ #define GSC_EEPROM_DDR_WIDTH 0x2D /* enum (32,64) bit */ -/* configure MX6Q/DUAL mmdc DDR io registers */ +/* configure i.MX6Q/DUAL mmdc DDR io registers */ struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ .dram_sdclk_0 = 0x00020030, @@ -64,7 +64,7 @@ struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_dqm7 = 0x00020030, }; -/* configure MX6Q/DUAL mmdc GRP io registers */ +/* configure i.MX6Q/DUAL mmdc GRP io registers */ struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { /* DDR3 */ .grp_ddr_type = 0x000c0000, diff --git a/board/kosagi/novena/novena_spl.c b/board/kosagi/novena/novena_spl.c index b4a68da88f..a99d794f69 100644 --- a/board/kosagi/novena/novena_spl.c +++ b/board/kosagi/novena/novena_spl.c @@ -425,7 +425,7 @@ int board_mmc_init(bd_t *bis) } #endif -/* Configure MX6Q/DUAL mmdc DDR io registers */ +/* Configure i.MX6Q/DUAL mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = { /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ .dram_sdclk_0 = 0x00020038, @@ -462,7 +462,7 @@ static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = { .dram_dqm7 = 0x00000038, }; -/* Configure MX6Q/DUAL mmdc GRP io registers */ +/* Configure i.MX6Q/DUAL mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs novena_grp_ioregs = { /* DDR3 */ .grp_ddr_type = 0x000c0000, diff --git a/board/liebherr/mccmon6/spl.c b/board/liebherr/mccmon6/spl.c index 196da46df9..d975be64c5 100644 --- a/board/liebherr/mccmon6/spl.c +++ b/board/liebherr/mccmon6/spl.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; #define IMX6DQ_DRIVE_STRENGTH 0x30 #define IMX6SDL_DRIVE_STRENGTH 0x28 -/* configure MX6Q/DUAL mmdc DDR io registers */ +/* configure i.MX6Q/DUAL mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, @@ -63,7 +63,7 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, }; -/* configure MX6Q/DUAL mmdc GRP io registers */ +/* configure i.MX6Q/DUAL mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { .grp_ddr_type = 0x000c0000, .grp_ddrmode_ctl = 0x00020000, diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c index 1f3e378ffc..5e5f1674b8 100644 --- a/board/logicpd/imx6/imx6logic.c +++ b/board/logicpd/imx6/imx6logic.c @@ -177,7 +177,7 @@ int board_late_init(void) env_set("board_name", "imx6logic"); if (is_mx6dq()) { - env_set("board_rev", "MX6DQ"); + env_set("board_rev", "i.MX6DQ"); env_set("fdt_file", "imx6q-logicpd.dtb"); } diff --git a/board/seco/Kconfig b/board/seco/Kconfig index af1669733f..0a37f5d5bb 100644 --- a/board/seco/Kconfig +++ b/board/seco/Kconfig @@ -21,15 +21,15 @@ choice config SECOMX6Q bool "i.MX6Q" - select MX6Q + select SOC_IMX6Q config SECOMX6DL bool "i.MX6DL" - select MX6DL + select SOC_IMX6DL config SECOMX6S bool "i.MX6S" - select MX6S + select SOC_IMX6S endchoice diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index ee9e4f7c01..d2cccd3935 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -393,11 +393,11 @@ static bool is_hummingboard2(void) int checkboard(void) { if (is_hummingboard2()) - puts("Board: MX6 Hummingboard2\n"); + puts("Board: i.MX6 Hummingboard2\n"); else if (is_hummingboard()) - puts("Board: MX6 Hummingboard\n"); + puts("Board: i.MX6 Hummingboard\n"); else - puts("Board: MX6 Cubox-i\n"); + puts("Board: i.MX6 Cubox-i\n"); return 0; } @@ -413,9 +413,9 @@ int board_late_init(void) env_set("board_name", "CUBOXI"); if (is_mx6dq()) - env_set("board_rev", "MX6Q"); + env_set("board_rev", "i.MX6Q"); else - env_set("board_rev", "MX6DL"); + env_set("board_rev", "i.MX6DL"); #endif return 0; diff --git a/board/tbs/tbs2910/Kconfig b/board/tbs/tbs2910/Kconfig index 2e5e1d492a..09e14e1b59 100644 --- a/board/tbs/tbs2910/Kconfig +++ b/board/tbs/tbs2910/Kconfig @@ -9,7 +9,7 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "tbs2910" -config MX6Q +config SOC_IMX6Q default y config IMX_CONFIG diff --git a/board/toradex/apalis_imx6/ddr-setup.cfg b/board/toradex/apalis_imx6/ddr-setup.cfg index de7cdd6d63..301138645a 100644 --- a/board/toradex/apalis_imx6/ddr-setup.cfg +++ b/board/toradex/apalis_imx6/ddr-setup.cfg @@ -17,10 +17,10 @@ /* * DDR3 settings - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), - * memory bus width: 64 bits x16/x32/x64 - * MX6DL ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 64 bits x16/x32/x64 + * SOC_IMX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), + * memory bus width: 64 bits x16/x32/x64 + * SOC_IMX6DL ddr is limited to 800 MHz(400 MHz clock) + * memory bus width: 64 bits x16/x32/x64 * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) * memory bus width: 32 bits x16/x32 */ diff --git a/board/toradex/colibri_imx6/ddr-setup.cfg b/board/toradex/colibri_imx6/ddr-setup.cfg index f46ae55ced..5ad87588bd 100644 --- a/board/toradex/colibri_imx6/ddr-setup.cfg +++ b/board/toradex/colibri_imx6/ddr-setup.cfg @@ -17,10 +17,10 @@ /* * DDR3 settings - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), - * memory bus width: 64 bits x16/x32/x64 - * MX6DL ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 64 bits x16/x32/x64 + * SOC_IMX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), + * memory bus width: 64 bits x16/x32/x64 + * SOC_IMX6DL ddr is limited to 800 MHz(400 MHz clock) + * memory bus width: 64 bits x16/x32/x64 * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) * memory bus width: 32 bits x16/x32 */ diff --git a/board/tqc/tqma6/Kconfig b/board/tqc/tqma6/Kconfig index 6df4134286..f140ad6908 100644 --- a/board/tqc/tqma6/Kconfig +++ b/board/tqc/tqma6/Kconfig @@ -18,19 +18,19 @@ choice config TQMA6Q bool "TQMa6Q / TQMa6D" - select MX6Q + select SOC_IMX6Q help select TQMa6Q / TQMa6D with i.MX6Q/D and 1GiB DRAM config TQMA6DL bool "TQMa6DL" - select MX6DL + select SOC_IMX6DL help select TQMa6DL with i.MX6DL and 1GiB DRAM config TQMA6S bool "TQMa6S" - select MX6S + select SOC_IMX6S help select TQMa6S with i.MX6S and 512 MiB DRAM diff --git a/board/udoo/README b/board/udoo/README index 6fbcc598f7..3d47e1348e 100644 --- a/board/udoo/README +++ b/board/udoo/README @@ -1,7 +1,7 @@ -How to use U-Boot on MX6Q/DL Udoo boards +How to use U-Boot on i.MX6Q/DL Udoo boards ---------------------------------------- -- Build U-Boot for MX6Q/DL Udoo boards: +- Build U-Boot for i.MX6Q/DL Udoo boards: $ make mrproper $ make udoo_defconfig diff --git a/board/udoo/udoo.c b/board/udoo/udoo.c index 562f0d863e..ad1877fa79 100644 --- a/board/udoo/udoo.c +++ b/board/udoo/udoo.c @@ -254,9 +254,9 @@ int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (is_cpu_type(MXC_CPU_MX6Q)) - env_set("board_rev", "MX6Q"); + env_set("board_rev", "i.MX6Q"); else - env_set("board_rev", "MX6DL"); + env_set("board_rev", "i.MX6DL"); #endif return 0; } diff --git a/board/udoo/udoo_spl.c b/board/udoo/udoo_spl.c index 694055bd2e..daf453ff43 100644 --- a/board/udoo/udoo_spl.c +++ b/board/udoo/udoo_spl.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; #define IMX6DQ_DRIVE_STRENGTH 0x30 #define IMX6SDL_DRIVE_STRENGTH 0x28 -/* configure MX6Q/DUAL mmdc DDR io registers */ +/* configure i.MX6Q/DUAL mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, @@ -64,7 +64,7 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, }; -/* configure MX6Q/DUAL mmdc GRP io registers */ +/* configure i.MX6Q/DUAL mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { .grp_ddr_type = 0x000c0000, .grp_ddrmode_ctl = 0x00020000, diff --git a/board/wandboard/spl.c b/board/wandboard/spl.c index 5b9622e75e..5f4f00ae03 100644 --- a/board/wandboard/spl.c +++ b/board/wandboard/spl.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; #define IMX6SDL_DRIVE_STRENGTH 0x28 #define IMX6QP_DRIVE_STRENGTH 0x28 -/* configure MX6Q/DUAL mmdc DDR io registers */ +/* configure i.MX6Q/DUAL mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, @@ -64,7 +64,7 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, }; -/* configure MX6QP mmdc DDR io registers */ +/* configure i.MX6QP mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs mx6qp_ddr_ioregs = { .dram_sdclk_0 = IMX6QP_DRIVE_STRENGTH, .dram_sdclk_1 = IMX6QP_DRIVE_STRENGTH, @@ -94,7 +94,7 @@ static struct mx6dq_iomux_ddr_regs mx6qp_ddr_ioregs = { .dram_dqm7 = IMX6QP_DRIVE_STRENGTH, }; -/* configure MX6Q/DUAL mmdc GRP io registers */ +/* configure i.MX6Q/DUAL mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { .grp_ddr_type = 0x000c0000, .grp_ddrmode_ctl = 0x00020000, @@ -112,7 +112,7 @@ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { .grp_b7ds = IMX6DQ_DRIVE_STRENGTH, }; -/* configure MX6QP mmdc GRP io registers */ +/* configure i.MX6QP mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs mx6qp_grp_ioregs = { .grp_ddr_type = 0x000c0000, .grp_ddrmode_ctl = 0x00020000, diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 1e7c11e670..b9972d44a7 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -511,11 +511,11 @@ int board_late_init(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (is_mx6dqp()) - env_set("board_rev", "MX6QP"); + env_set("board_rev", "i.MX6QP"); else if (is_mx6dq()) - env_set("board_rev", "MX6Q"); + env_set("board_rev", "i.MX6Q"); else - env_set("board_rev", "MX6DL"); + env_set("board_rev", "i.MX6DL"); if (is_revd1()) env_set("board_name", "D1"); diff --git a/cmd/fastboot/Kconfig b/cmd/fastboot/Kconfig index 0d2c2f131e..bba199b3ef 100644 --- a/cmd/fastboot/Kconfig +++ b/cmd/fastboot/Kconfig @@ -30,7 +30,8 @@ if USB_FUNCTION_FASTBOOT config FASTBOOT_BUF_ADDR hex "Define FASTBOOT buffer address" - default 0x82000000 if MX6SX || MX6SL || MX6UL || MX6SLL + default 0x82000000 if SOC_IMX6SX || SOC_IMX6SL || SOC_IMX6UL || \ + SOC_IMX6SLL default 0x81000000 if ARCH_OMAP2PLUS default 0x42000000 if ARCH_SUNXI && !MACH_SUN9I default 0x22000000 if ARCH_SUNXI && MACH_SUN9I diff --git a/common/spl/Kconfig b/common/spl/Kconfig index b9b9e0f3a0..af27f2d7b7 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -56,7 +56,7 @@ config SPL_BOOTROM_SUPPORT config SPL_RAW_IMAGE_SUPPORT bool "Support SPL loading and booting of RAW images" - default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT)) + default n if (ARCH_IMX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT)) default y if !TI_SECURE_DEVICE help SPL will support loading and booting a RAW image when this option @@ -143,7 +143,7 @@ config SPL_DISPLAY_PRINT config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR bool "MMC raw mode: by sector" - default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER ||ARCH_MX6 || \ + default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER ||ARCH_IMX6 || \ ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \ ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \ OMAP44XX || OMAP54XX || AM33XX || AM43XX @@ -156,7 +156,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR default 0x50 if ARCH_SUNXI default 0x75 if ARCH_DAVINCI - default 0x8a if ARCH_MX6 + default 0x8a if ARCH_IMX6 default 0x100 if ARCH_UNIPHIER default 0x140 if ARCH_MVEBU default 0x200 if ARCH_SOCFPGA || ARCH_AT91 diff --git a/common/spl/spl.c b/common/spl/spl.c index b1ce56d0d0..c6fcaac15a 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -399,7 +399,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) if (spl_init()) hang(); } -#if !defined(CONFIG_PPC) && !defined(CONFIG_ARCH_MX6) +#if !defined(CONFIG_PPC) && !defined(CONFIG_ARCH_IMX6) /* * timer_init() does not exist on PPC systems. The timer is initialized * and enabled (decrementer) in interrupt_init() here. diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 7b6adadc14..b27648b460 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -9,7 +9,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_CMD_HDMIDETECT=y CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/apalis_imx6_nospl_com_defconfig b/configs/apalis_imx6_nospl_com_defconfig index d6e3787221..eee36a21c5 100644 --- a/configs/apalis_imx6_nospl_com_defconfig +++ b/configs/apalis_imx6_nospl_com_defconfig @@ -1,11 +1,11 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_APALIS_IMX6=y CONFIG_CMD_HDMIDETECT=y CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=1024" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,SOC_IMX6Q,DDR_MB=1024" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/apalis_imx6_nospl_it_defconfig b/configs/apalis_imx6_nospl_it_defconfig index 306f96763b..2d45b9107d 100644 --- a/configs/apalis_imx6_nospl_it_defconfig +++ b/configs/apalis_imx6_nospl_it_defconfig @@ -1,11 +1,11 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_APALIS_IMX6=y CONFIG_CMD_HDMIDETECT=y CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=2048" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,SOC_IMX6Q,DDR_MB=2048" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig index 8343846e19..040f8613be 100644 --- a/configs/aristainetos2_defconfig +++ b/configs/aristainetos2_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_ARISTAINETOS2=y CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,SOC_IMX6DL" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/aristainetos2b_defconfig b/configs/aristainetos2b_defconfig index b49b1f24d0..f23b24596f 100644 --- a/configs/aristainetos2b_defconfig +++ b/configs/aristainetos2b_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_ARISTAINETOS2B=y CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,SOC_IMX6DL" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/aristainetos_defconfig b/configs/aristainetos_defconfig index cc713e29bd..80d22a5f17 100644 --- a/configs/aristainetos_defconfig +++ b/configs/aristainetos_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_ARISTAINETOS=y CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,SOC_IMX6DL" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig index 2ac0bac0b6..04644c3eaf 100644 --- a/configs/cgtqmx6eval_defconfig +++ b/configs/cgtqmx6eval_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index 183ad4282b..79b3529525 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index b982a5eae8..e908b543f9 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -9,7 +9,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_CMD_HDMIDETECT=y CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6DL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6DL" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/colibri_imx6_nospl_defconfig b/configs/colibri_imx6_nospl_defconfig index c5088215e8..2f747c2e97 100644 --- a/configs/colibri_imx6_nospl_defconfig +++ b/configs/colibri_imx6_nospl_defconfig @@ -1,11 +1,11 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_COLIBRI_IMX6=y CONFIG_CMD_HDMIDETECT=y CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx6/colibri_imx6.cfg,MX6DL,DDR_MB=256" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx6/colibri_imx6.cfg,SOC_IMX6DL,DDR_MB=256" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 2b4fe9c2c5..838fb7a1fe 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/display5_defconfig b/configs/display5_defconfig index a0d9eaee97..7080849fa1 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -13,7 +13,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5" CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SPL=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index 632b32ac61..a0eca39956 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -10,7 +10,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run factory" diff --git a/configs/dms-ba16-1g_defconfig b/configs/dms-ba16-1g_defconfig index 40b317093f..ee365989b5 100644 --- a/configs/dms-ba16-1g_defconfig +++ b/configs/dms-ba16-1g_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_ADVANTECH_DMS_BA16=y CONFIG_SYS_DDR_1G=y diff --git a/configs/dms-ba16_defconfig b/configs/dms-ba16_defconfig index 3519c5275c..1d2663e6e6 100644 --- a/configs/dms-ba16_defconfig +++ b/configs/dms-ba16_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_ADVANTECH_DMS_BA16=y CONFIG_BOOTDELAY=1 diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig index 045380b6de..e6c6f86ce4 100644 --- a/configs/ge_b450v3_defconfig +++ b/configs/ge_b450v3_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_GE_B450V3=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig index 9d4b8aeebe..720ac2ab1e 100644 --- a/configs/ge_b650v3_defconfig +++ b/configs/ge_b650v3_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_GE_B650V3=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig index 94785681be..febce1481f 100644 --- a/configs/ge_b850v3_defconfig +++ b/configs/ge_b850v3_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_GE_B850V3=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index a6db1040b6..cf745dd62f 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 41b93c8a07..2633a72473 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index e513289583..e58aeb459f 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig index d17f9cfed9..282a23d090 100644 --- a/configs/imx6dl_icore_nand_defconfig +++ b/configs/imx6dl_icore_nand_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig index 2a86059226..937b5e5236 100644 --- a/configs/imx6q_icore_nand_defconfig +++ b/configs/imx6q_icore_nand_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index e6b3264e94..f349554723 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -1,10 +1,10 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_MX6LOGICPD=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd" CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=3 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index 6dc8d2fe13..4d8c07af0b 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index a3f5e8fc34..4eb68b21de 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig index 2a86059226..937b5e5236 100644 --- a/configs/imx6qdl_icore_nand_defconfig +++ b/configs/imx6qdl_icore_nand_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index 6c8fb85ca2..f5d2067435 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig index b6d8680b08..f4d71d28dc 100644 --- a/configs/imx6ul_geam_mmc_defconfig +++ b/configs/imx6ul_geam_mmc_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig index a8eb08bf5d..9f60e9fb8c 100644 --- a/configs/imx6ul_geam_nand_defconfig +++ b/configs/imx6ul_geam_nand_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig index a9bfbfd254..774cf4ebbf 100644 --- a/configs/imx6ul_isiot_emmc_defconfig +++ b/configs/imx6ul_isiot_emmc_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig index ba898e6e16..d5b12e3709 100644 --- a/configs/imx6ul_isiot_nand_defconfig +++ b/configs/imx6ul_isiot_nand_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig index 22872b3ece..98b2e02bef 100644 --- a/configs/liteboard_defconfig +++ b/configs/liteboard_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig index 76b55df0c2..309b92a50d 100644 --- a/configs/marsboard_defconfig +++ b/configs/marsboard_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_EMBESTMX6BOARDS=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,SOC_IMX6Q,DDR_MB=1024" CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index da1d502959..38200e7a76 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index cbfd125fb0..defbf82ec7 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index 14f128a96b..4b5b2d5bd8 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/mx6dlarm2_defconfig b/configs/mx6dlarm2_defconfig index 1dc4e975ff..a7c3fa8c79 100644 --- a/configs/mx6dlarm2_defconfig +++ b/configs/mx6dlarm2_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_MX6QARM2=y # CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,DDR_MB=2048" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,SOC_IMX6DL,DDR_MB=2048" CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/mx6dlarm2_lpddr2_defconfig b/configs/mx6dlarm2_lpddr2_defconfig index 8f07f8feea..b6f2be823b 100644 --- a/configs/mx6dlarm2_lpddr2_defconfig +++ b/configs/mx6dlarm2_lpddr2_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_MX6QARM2=y # CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,MX6DL_LPDDR2,DDR_MB=512" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,SOC_IMX6DL,MX6DL_LPDDR2,DDR_MB=512" CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig index fdcef6b65b..ee5bca2963 100644 --- a/configs/mx6memcal_defconfig +++ b/configs/mx6memcal_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y @@ -7,7 +7,7 @@ CONFIG_MX6_DDRCAL=y CONFIG_TARGET_MX6MEMCAL=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,MX6QDL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,SOC_IMX6QDL" CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SPL=y CONFIG_SPL_USB_HOST_SUPPORT=y diff --git a/configs/mx6qarm2_defconfig b/configs/mx6qarm2_defconfig index 925fc16d6c..db2a771b0d 100644 --- a/configs/mx6qarm2_defconfig +++ b/configs/mx6qarm2_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_MX6QARM2=y # CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,DDR_MB=2048" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,SOC_IMX6Q,DDR_MB=2048" CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/mx6qarm2_lpddr2_defconfig b/configs/mx6qarm2_lpddr2_defconfig index b907cb4225..d61bc73d4f 100644 --- a/configs/mx6qarm2_lpddr2_defconfig +++ b/configs/mx6qarm2_lpddr2_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_MX6QARM2=y # CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,MX6DQ_LPDDR2,DDR_MB=512" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,SOC_IMX6Q,MX6DQ_LPDDR2,DDR_MB=512" CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index 2b45dc17fd..f6f1a60f11 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_NITROGEN6X=y CONFIG_CMD_HDMIDETECT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,SOC_IMX6Q,DDR_MB=1024,SABRELITE" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index ee6ca57b00..114830c29f 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 83b8bed52b..41c8984cad 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index a49e9cd72a..eeb98d63b0 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_MX6SLEVK=y # CONFIG_CMD_BMODE is not set diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 76fc584055..6d3bb56ab8 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_MX6SLEVK=y # CONFIG_CMD_BMODE is not set diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig index c021b39ba0..3101c393b3 100644 --- a/configs/mx6slevk_spl_defconfig +++ b/configs/mx6slevk_spl_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/mx6sllevk_defconfig b/configs/mx6sllevk_defconfig index 39c1cef3ce..f6dad44279 100644 --- a/configs/mx6sllevk_defconfig +++ b/configs/mx6sllevk_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_MX6SLLEVK=y # CONFIG_CMD_BMODE is not set diff --git a/configs/mx6sllevk_plugin_defconfig b/configs/mx6sllevk_plugin_defconfig index 86f5195805..2395dc5971 100644 --- a/configs/mx6sllevk_plugin_defconfig +++ b/configs/mx6sllevk_plugin_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_MX6SLLEVK=y CONFIG_USE_IMXIMG_PLUGIN=y diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig index 2ea2877b5c..aa1d66ef0c 100644 --- a/configs/mx6sxsabreauto_defconfig +++ b/configs/mx6sxsabreauto_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_MX6SXSABREAUTO=y # CONFIG_CMD_BMODE is not set diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index 2856a7fd8a..e24a69c2dc 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_MX6SXSABRESD=y # CONFIG_CMD_BMODE is not set diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig index 146c801404..ea8023d115 100644 --- a/configs/mx6sxsabresd_spl_defconfig +++ b/configs/mx6sxsabresd_spl_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig index a9926859b7..78e570fecf 100644 --- a/configs/mx6ul_14x14_evk_defconfig +++ b/configs/mx6ul_14x14_evk_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/mx6ul_9x9_evk_defconfig b/configs/mx6ul_9x9_evk_defconfig index a36a872bac..f484710118 100644 --- a/configs/mx6ul_9x9_evk_defconfig +++ b/configs/mx6ul_9x9_evk_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/mx6ull_14x14_evk_defconfig b/configs/mx6ull_14x14_evk_defconfig index 375db54a75..711a436145 100644 --- a/configs/mx6ull_14x14_evk_defconfig +++ b/configs/mx6ull_14x14_evk_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_MX6ULL_14X14_EVK=y CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk" diff --git a/configs/mx6ull_14x14_evk_plugin_defconfig b/configs/mx6ull_14x14_evk_plugin_defconfig index ce2271549e..b37b39cc58 100644 --- a/configs/mx6ull_14x14_evk_plugin_defconfig +++ b/configs/mx6ull_14x14_evk_plugin_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_MX6ULL_14X14_EVK=y CONFIG_USE_IMXIMG_PLUGIN=y diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig index c109aa3b97..40db9a7127 100644 --- a/configs/nitrogen6dl2g_defconfig +++ b/configs/nitrogen6dl2g_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_NITROGEN6X=y CONFIG_CMD_HDMIDETECT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,SOC_IMX6DL,DDR_MB=2048" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig index 462229e159..d060ae3ffe 100644 --- a/configs/nitrogen6dl_defconfig +++ b/configs/nitrogen6dl_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_NITROGEN6X=y CONFIG_CMD_HDMIDETECT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,SOC_IMX6DL,DDR_MB=1024" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig index 79c8de3d8e..277f3211ea 100644 --- a/configs/nitrogen6q2g_defconfig +++ b/configs/nitrogen6q2g_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_NITROGEN6X=y CONFIG_CMD_HDMIDETECT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,SOC_IMX6Q,DDR_MB=2048" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig index 2895b6e958..70c3a9eb60 100644 --- a/configs/nitrogen6q_defconfig +++ b/configs/nitrogen6q_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_NITROGEN6X=y CONFIG_CMD_HDMIDETECT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,SOC_IMX6Q,DDR_MB=1024" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig index e7348af733..664ab44a04 100644 --- a/configs/nitrogen6s1g_defconfig +++ b/configs/nitrogen6s1g_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_NITROGEN6X=y CONFIG_CMD_HDMIDETECT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SOC_IMX6S,DDR_MB=1024" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig index e9e9f73176..81f97086c7 100644 --- a/configs/nitrogen6s_defconfig +++ b/configs/nitrogen6s_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_NITROGEN6X=y CONFIG_CMD_HDMIDETECT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,SOC_IMX6S,DDR_MB=512" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/novena_defconfig b/configs/novena_defconfig index 75cc57b7e1..99055a4b96 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -14,7 +14,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_CMD_HDMIDETECT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttymxc1,115200 " CONFIG_BOOTCOMMAND="run distro_bootcmd ; run net_nfs" diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig index d4c8db23fd..448c6876f2 100644 --- a/configs/opos6uldev_defconfig +++ b/configs/opos6uldev_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y diff --git a/configs/ot1200_defconfig b/configs/ot1200_defconfig index e5baed1ada..6851db14d6 100644 --- a/configs/ot1200_defconfig +++ b/configs/ot1200_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_OT1200=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/ot1200_spl_defconfig b/configs/ot1200_spl_defconfig index 29bbb9d012..52affefbc6 100644 --- a/configs/ot1200_spl_defconfig +++ b/configs/ot1200_spl_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -9,7 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig index b52499d161..aae4ea6ec5 100644 --- a/configs/pcm058_defconfig +++ b/configs/pcm058_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -14,7 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_HDMIDETECT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=3 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/pfla02_defconfig b/configs/pfla02_defconfig index c1ced48d9b..1af404cab1 100644 --- a/configs/pfla02_defconfig +++ b/configs/pfla02_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig index c6fa11a9b4..67020dbfb4 100644 --- a/configs/pico-imx6ul_defconfig +++ b/configs/pico-imx6ul_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_PICO_IMX6UL=y # CONFIG_CMD_BMODE is not set diff --git a/configs/platinum_picon_defconfig b/configs/platinum_picon_defconfig index c466d14db7..6cba40eb62 100644 --- a/configs/platinum_picon_defconfig +++ b/configs/platinum_picon_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -10,7 +10,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6DL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6DL" CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/platinum_titanium_defconfig b/configs/platinum_titanium_defconfig index 298261d26a..3866e031da 100644 --- a/configs/platinum_titanium_defconfig +++ b/configs/platinum_titanium_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -10,7 +10,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index dd7df83959..69701359f9 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_EMBESTMX6BOARDS=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SOC_IMX6S,DDR_MB=1024" CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig index f1136609c3..657a8fb7b0 100644 --- a/configs/secomx6quq7_defconfig +++ b/configs/secomx6quq7_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_SECOMX6=y CONFIG_SECOMX6_UQ7=y @@ -9,7 +9,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > " +CONFIG_SYS_PROMPT="SECO i.MX6Q uQ7 U-Boot > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/sksimx6_defconfig b/configs/sksimx6_defconfig index c5cb7134f5..c32813cd16 100644 --- a/configs/sksimx6_defconfig +++ b/configs/sksimx6_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -14,7 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6QDL" CONFIG_BOOTDELAY=1 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SILENT_CONSOLE=y diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 567f80be84..e52e8ab8d8 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_TBS2910=y CONFIG_CMD_HDMIDETECT=y diff --git a/configs/titanium_defconfig b/configs/titanium_defconfig index 2267039363..360c04d6dd 100644 --- a/configs/titanium_defconfig +++ b/configs/titanium_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_TARGET_TITANIUM=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/barco/titanium/imximage.cfg" diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig index 3a6a9f04c6..9ff81c690b 100644 --- a/configs/tqma6dl_mba6_mmc_defconfig +++ b/configs/tqma6dl_mba6_mmc_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x4fc00000 CONFIG_TARGET_TQMA6=y CONFIG_TQMA6DL=y diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig index 35f58a2642..9b14458563 100644 --- a/configs/tqma6dl_mba6_spi_defconfig +++ b/configs/tqma6dl_mba6_spi_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x4fc00000 CONFIG_TARGET_TQMA6=y CONFIG_TQMA6DL=y diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig index 4a4803d969..ea492ba27f 100644 --- a/configs/tqma6q_mba6_mmc_defconfig +++ b/configs/tqma6q_mba6_mmc_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x4fc00000 CONFIG_TARGET_TQMA6=y CONFIG_FIT=y diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig index a37ab54511..2e5f8dc5d0 100644 --- a/configs/tqma6q_mba6_spi_defconfig +++ b/configs/tqma6q_mba6_spi_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x4fc00000 CONFIG_TARGET_TQMA6=y CONFIG_TQMA6X_SPI_BOOT=y diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig index dec79e044f..e307c8631f 100644 --- a/configs/tqma6s_mba6_mmc_defconfig +++ b/configs/tqma6s_mba6_mmc_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x2fc00000 CONFIG_TARGET_TQMA6=y CONFIG_TQMA6S=y diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig index ba257b81d2..cac256b0c4 100644 --- a/configs/tqma6s_mba6_spi_defconfig +++ b/configs/tqma6s_mba6_spi_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x2fc00000 CONFIG_TARGET_TQMA6=y CONFIG_TQMA6S=y diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig index 995a1ced0f..d0600f53b9 100644 --- a/configs/tqma6s_wru4_mmc_defconfig +++ b/configs/tqma6s_wru4_mmc_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x2fc00000 CONFIG_TARGET_TQMA6=y CONFIG_TQMA6S=y diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig index 0e88f2b470..a88a2f788f 100644 --- a/configs/udoo_defconfig +++ b/configs/udoo_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig index dff2896749..d3623c2150 100644 --- a/configs/udoo_neo_defconfig +++ b/configs/udoo_neo_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig index 844809d8e6..b0784b5669 100644 --- a/configs/vining_2000_defconfig +++ b/configs/vining_2000_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_SAMTEC_VINING_2000=y # CONFIG_CMD_BMODE is not set diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 2c739fae1c..bdd53f747a 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/warp_defconfig b/configs/warp_defconfig index bddf4bcf1d..9996c4363a 100644 --- a/configs/warp_defconfig +++ b/configs/warp_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_WARP=y # CONFIG_CMD_BMODE is not set diff --git a/configs/xpress_defconfig b/configs/xpress_defconfig index 4a3ddccd3c..05d9e3ee6f 100644 --- a/configs/xpress_defconfig +++ b/configs/xpress_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_XPRESS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ccv/xpress/imximage.cfg" diff --git a/configs/xpress_spl_defconfig b/configs/xpress_spl_defconfig index 3425d5325f..478ab27a13 100644 --- a/configs/xpress_spl_defconfig +++ b/configs/xpress_spl_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y diff --git a/configs/zc5202_defconfig b/configs/zc5202_defconfig index 82e8fc33a8..ae489ad161 100644 --- a/configs/zc5202_defconfig +++ b/configs/zc5202_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -12,7 +12,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx6q-zc5202.dtb" diff --git a/configs/zc5601_defconfig b/configs/zc5601_defconfig index cd2f5216c9..b643e2abfa 100644 --- a/configs/zc5601_defconfig +++ b/configs/zc5601_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_ARCH_MX6=y +CONFIG_ARCH_IMX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y @@ -12,7 +12,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx6q-zc5601.dtb" diff --git a/doc/README.imx6 b/doc/README.imx6 index b0644f8491..63a73f1bbf 100644 --- a/doc/README.imx6 +++ b/doc/README.imx6 @@ -14,7 +14,7 @@ SoC. Example: -For reading the MAC address fuses on a MX6Q: +For reading the MAC address fuses on a i.MX6Q: - The MAC address is stored in two fuse addresses (the fuse addresses are described in the Fusemap Descriptions table from the mx6q Reference Manual): diff --git a/doc/README.imximage b/doc/README.imximage index 803682f558..9ae88bc337 100644 --- a/doc/README.imximage +++ b/doc/README.imximage @@ -3,11 +3,11 @@ Imximage Boot Image generation using mkimage --------------------------------------------- This document describes how to set up a U-Boot image that can be booted -by Freescale MX25, MX35, MX51, MX53 and MX6 processors via internal boot +by Freescale MX25, MX35, MX51, MX53 and i.MX6 processors via internal boot mode. These processors can boot directly from NAND, SPI flash and SD card flash -using its internal boot ROM support. MX6 processors additionally support +using its internal boot ROM support. i.MX6 processors additionally support boot from NOR flash and SATA disks. All processors can boot from an internal UART, if booting from device media fails. Booting from NOR flash does not require to use this image type. diff --git a/drivers/ata/dwc_ahsata.c b/drivers/ata/dwc_ahsata.c index 480ae115af..2c7714ab53 100644 --- a/drivers/ata/dwc_ahsata.c +++ b/drivers/ata/dwc_ahsata.c @@ -885,7 +885,7 @@ int init_sata(int dev) { struct ahci_uc_priv *uc_priv = NULL; -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) if (!is_mx6dq() && !is_mx6dqp()) return 1; #endif diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index aadf851101..8ed1b4ea4a 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -14,7 +14,7 @@ #include "jobdesc.h" #include "rsa_caam.h" -#if defined(CONFIG_MX6) || defined(CONFIG_MX7) +#if defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7) /*! * Secure memory run command * diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 4ee6afad35..e904e98cd3 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -21,7 +21,7 @@ config TI_EDMA3 config APBH_DMA bool "Support APBH DMA" - depends on MX23 || MX28 || MX6 || MX7 + depends on MX23 || MX28 || SOC_IMX6 || MX7 help Enable APBH DMA driver. diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index fea8767d7b..6365fb779d 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -215,7 +215,7 @@ static int mxs_dma_reset(int channel) #if defined(CONFIG_MX23) uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set); uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET; -#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#elif (defined(CONFIG_MX28) || defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set); uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET; #endif diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index d0e365a54b..3ad08bf767 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -40,19 +40,20 @@ static unsigned long gpio_ports[] = { [1] = GPIO2_BASE_ADDR, [2] = GPIO3_BASE_ADDR, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ - defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ + defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ defined(CONFIG_MX7) || defined(CONFIG_MX8M) [3] = GPIO4_BASE_ADDR, #endif -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ defined(CONFIG_MX7) || defined(CONFIG_MX8M) [4] = GPIO5_BASE_ADDR, -#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_MX8M)) +#if !(defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) || \ + defined(CONFIG_MX8M)) [5] = GPIO6_BASE_ADDR, #endif #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_MX7) -#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#if defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7) +#if !(defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) [6] = GPIO7_BASE_ADDR, #endif #endif @@ -349,18 +350,18 @@ static const struct mxc_gpio_plat mxc_plat[] = { { 1, (struct gpio_regs *)GPIO2_BASE_ADDR }, { 2, (struct gpio_regs *)GPIO3_BASE_ADDR }, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ - defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ + defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ defined(CONFIG_MX8M) { 3, (struct gpio_regs *)GPIO4_BASE_ADDR }, #endif -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ defined(CONFIG_MX8M) { 4, (struct gpio_regs *)GPIO5_BASE_ADDR }, #ifndef CONFIG_MX8M { 5, (struct gpio_regs *)GPIO6_BASE_ADDR }, #endif #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) +#if defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) { 6, (struct gpio_regs *)GPIO7_BASE_ADDR }, #endif }; @@ -370,18 +371,18 @@ U_BOOT_DEVICES(mxc_gpios) = { { "gpio_mxc", &mxc_plat[1] }, { "gpio_mxc", &mxc_plat[2] }, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ - defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ + defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ defined(CONFIG_MX8M) { "gpio_mxc", &mxc_plat[3] }, #endif -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ defined(CONFIG_MX8M) { "gpio_mxc", &mxc_plat[4] }, #ifndef CONFIG_MX8M { "gpio_mxc", &mxc_plat[5] }, #endif #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) +#if defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) { "gpio_mxc", &mxc_plat[6] }, #endif }; diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 3299ef0fea..cd3ba8c7a4 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -150,7 +150,7 @@ config SYS_I2C_MESON config SYS_I2C_MXC bool "NXP i.MX I2C driver" - depends on MX6 + depends on SOC_IMX6 help Add support for the NXP i.MX I2C driver. This supports upto for bus channels and operating on standard mode upto 100 kbits/s and fast diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c index 8662e82cfa..667e82bb21 100644 --- a/drivers/misc/mxc_ocotp.c +++ b/drivers/misc/mxc_ocotp.c @@ -66,11 +66,11 @@ #define WRITE_POSTAMBLE_US 2 -#if defined(CONFIG_MX6) || defined(CONFIG_VF610) +#if defined(CONFIG_SOC_IMX6) || defined(CONFIG_VF610) #define FUSE_BANK_SIZE 0x80 -#ifdef CONFIG_MX6SL +#ifdef CONFIG_SOC_IMX6SL #define FUSE_BANKS 8 -#elif defined(CONFIG_MX6ULL) || defined(CONFIG_MX6SLL) +#elif defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX6SLL) #define FUSE_BANKS 9 #else #define FUSE_BANKS 16 @@ -88,7 +88,7 @@ #error "Unsupported architecture\n" #endif -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) /* * There is a hole in shadow registers address map of size 0x100 diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 5f67e336db..d92759bd26 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -210,10 +210,10 @@ config MMC_MXC config MMC_MXS bool "Freescale MXS Multimedia Card Interface support" - depends on MX23 || MX28 || MX6 || MX7 + depends on MX23 || MX28 || SOC_IMX6 || MX7 select APBH_DMA - select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 - select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 + select APBH_DMA_BURST if ARCH_IMX6 || ARCH_MX7 + select APBH_DMA_BURST8 if ARCH_IMX6 || ARCH_MX7 help This selects the Freescale SSP MMC controller found on MXS based platforms like mx23/28. diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index a820af61ce..19edb98f29 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -140,11 +140,11 @@ config NAND_MXC config NAND_MXS bool "MXS NAND support" - depends on MX23 || MX28 || MX6 || MX7 + depends on MX23 || MX28 || SOC_IMX6 || MX7 imply CMD_NAND select APBH_DMA - select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 - select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 + select APBH_DMA_BURST if ARCH_IMX6 || ARCH_MX7 + select APBH_DMA_BURST8 if ARCH_IMX6 || ARCH_MX7 help This enables NAND driver for the NAND flash controller on the MXS processors. diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index bed9b65ef4..20cd2f4056 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -30,7 +30,7 @@ #define MXS_NAND_DMA_DESCRIPTOR_COUNT 4 #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512 -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#if (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 2 #else #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 0 diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index de1947ccc1..7c6e0a5cb3 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -149,7 +149,7 @@ config ETHOC config FEC_MXC bool "FEC Ethernet controller" - depends on MX5 || MX6 + depends on MX5 || SOC_IMX6 help This driver supports the 10/100 Fast Ethernet controller for NXP i.MX processors. diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index ff7ad91116..8ab656d388 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -454,7 +454,7 @@ static int fec_open(struct eth_device *edev) writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6SL) udelay(100); /* setup the MII gasket for RMII mode */ diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 43a7d7bed8..d0ef86d46d 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -127,7 +127,7 @@ struct ethernet_regs { uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */ -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6SL) uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */ uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */ uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */ @@ -193,7 +193,7 @@ struct ethernet_regs { #define FEC_X_DES_ACTIVE_TDAR 0x01000000 #define FEC_R_DES_ACTIVE_RDAR 0x01000000 -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6SL) /* defines for MIIGSK */ /* RMII frequency control: 0=50MHz, 1=5MHz */ #define MIIGSK_CFGR_FRCONT (1 << 6) diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index ef66a1d3f4..969d03acce 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -24,7 +24,7 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX #define MX6_DBI_ADDR 0x08ffc000 #define MX6_IO_ADDR 0x08000000 #define MX6_MEM_ADDR 0x08100000 @@ -438,10 +438,10 @@ static int imx6_pcie_assert_core_reset(bool prepare_for_boot) if (is_mx6dqp()) setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST); -#if defined(CONFIG_MX6SX) +#if defined(CONFIG_SOC_IMX6SX) struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR; - /* SSP_EN is not used on MX6SX anymore */ + /* SSP_EN is not used on i.MX6SX anymore */ setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); /* Force PCIe PHY reset */ setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); @@ -452,7 +452,7 @@ static int imx6_pcie_assert_core_reset(bool prepare_for_boot) * If the bootloader already enabled the link we need some special * handling to get the core back into a state where it is safe to * touch it for configuration. As there is no dedicated reset signal - * wired up for MX6QDL, we need to manually force LTSSM into "detect" + * wired up for i.MX6QDL, we need to manually force LTSSM into "detect" * state before completely disabling LTSSM, which is a prerequisite * for core configuration. * @@ -498,7 +498,7 @@ static int imx6_pcie_init_phy(void) IOMUXC_GPR12_LOS_LEVEL_MASK, IOMUXC_GPR12_LOS_LEVEL_9); -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX clrsetbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_RX_EQ_MASK, IOMUXC_GPR12_RX_EQ_2); @@ -587,8 +587,8 @@ static int imx6_pcie_deassert_core_reset(void) */ mdelay(50); -#if defined(CONFIG_MX6SX) - /* SSP_EN is not used on MX6SX anymore */ +#if defined(CONFIG_SOC_IMX6SX) + /* SSP_EN is not used on i.MX6SX anymore */ clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); /* Clear PCIe PHY reset bit */ clrbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); diff --git a/drivers/pinctrl/nxp/Kconfig b/drivers/pinctrl/nxp/Kconfig index b668359a0b..5bcfb731dd 100644 --- a/drivers/pinctrl/nxp/Kconfig +++ b/drivers/pinctrl/nxp/Kconfig @@ -17,7 +17,7 @@ config PINCTRL_IMX5 config PINCTRL_IMX6 bool "IMX6 pinctrl driver" - depends on ARCH_MX6 && PINCTRL_FULL + depends on ARCH_IMX6 && PINCTRL_FULL select DEVRES select PINCTRL_IMX help diff --git a/drivers/pwm/pwm-imx-util.c b/drivers/pwm/pwm-imx-util.c index 97ac0c8fc0..89f0a4b2c4 100644 --- a/drivers/pwm/pwm-imx-util.c +++ b/drivers/pwm/pwm-imx-util.c @@ -23,13 +23,13 @@ struct pwm_regs *pwm_id_to_reg(int pwm_id) return (struct pwm_regs *)PWM1_BASE_ADDR; case 1: return (struct pwm_regs *)PWM2_BASE_ADDR; -#ifdef CONFIG_MX6 +#ifdef CONFIG_SOC_IMX6 case 2: return (struct pwm_regs *)PWM3_BASE_ADDR; case 3: return (struct pwm_regs *)PWM4_BASE_ADDR; #endif -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX case 4: return (struct pwm_regs *)PWM5_BASE_ADDR; case 5: diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index eb718a650f..c4b9f1de48 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -469,7 +469,7 @@ config MVEBU_A3700_UART config MXC_UART bool "IMX serial port support" - depends on MX5 || MX6 + depends on MX5 || SOC_IMX6 help If you have a machine based on a Motorola IMX CPU you can enable its onboard serial port by enabling this option. diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index 5dc69a6865..ae561456eb 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -20,8 +20,8 @@ DECLARE_GLOBAL_DATA_PTR; #define RX_BUFFER_SIZE 0x80 -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \ - defined(CONFIG_MX6ULL) || defined(CONFIG_MX7D) +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX7D) #define TX_BUFFER_SIZE 0x200 #else #define TX_BUFFER_SIZE 0x40 @@ -269,10 +269,10 @@ static void qspi_set_lut(struct fsl_qspi_priv *priv) INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); #endif -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \ - defined(CONFIG_MX6ULL) || defined(CONFIG_MX7D) +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX7D) /* - * To MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly. + * To i.MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly. * So, Use IDATSZ in IPCR to determine the size and here set 0. */ qspi_write32(priv->flags, ®s->lut[lut_base + 1], OPRND0(0) | @@ -854,14 +854,14 @@ void qspi_cfg_smpr(struct fsl_qspi_priv *priv, u32 clear_bits, u32 set_bits) #ifndef CONFIG_DM_SPI static unsigned long spi_bases[] = { QSPI0_BASE_ADDR, -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX QSPI1_BASE_ADDR, #endif }; static unsigned long amba_bases[] = { QSPI0_AMBA_BASE, -#ifdef CONFIG_MX6SX +#ifdef CONFIG_SOC_IMX6SX QSPI1_AMBA_BASE, #endif }; @@ -909,7 +909,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mcr_val = qspi_read32(qspi->priv.flags, ®s->mcr); /* Set endianness to LE for i.mx */ - if (IS_ENABLED(CONFIG_MX6) || IS_ENABLED(CONFIG_MX7)) + if (IS_ENABLED(CONFIG_SOC_IMX6) || IS_ENABLED(CONFIG_MX7)) mcr_val = QSPI_MCR_END_CFD_LE; qspi_write32(qspi->priv.flags, ®s->mcr, @@ -1032,7 +1032,7 @@ static int fsl_qspi_probe(struct udevice *bus) mcr_val = qspi_read32(priv->flags, &priv->regs->mcr); /* Set endianness to LE for i.mx */ - if (IS_ENABLED(CONFIG_MX6) || IS_ENABLED(CONFIG_MX7)) + if (IS_ENABLED(CONFIG_SOC_IMX6) || IS_ENABLED(CONFIG_MX7)) mcr_val = QSPI_MCR_END_CFD_LE; qspi_write32(priv->flags, &priv->regs->mcr, diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index a71b9be5fb..f288aedcef 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -10,7 +10,7 @@ if DM_THERMAL config IMX_THERMAL bool "Temperature sensor driver for Freescale i.MX SoCs" - depends on MX6 || MX7 + depends on SOC_IMX6 || MX7 help Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs. It supports one critical trip point and one passive trip point. The diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index d137bfdca0..25196a53e2 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -46,7 +46,7 @@ struct thermal_data { int maxc; }; -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) static int read_cpu_temperature(struct udevice *dev) { int temperature; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a7249b7511..f2e85bec4b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -89,7 +89,7 @@ endif # USB_XHCI_HCD config USB_EHCI_HCD bool "EHCI HCD (USB 2.0) support" - default y if ARCH_MX5 || ARCH_MX6 + default y if ARCH_MX5 || ARCH_IMX6 select USB_HOST ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 @@ -125,7 +125,7 @@ config USB_EHCI_MARVELL config USB_EHCI_MX6 bool "Support for i.MX6 on-chip EHCI USB controller" - depends on ARCH_MX6 + depends on ARCH_IMX6 default y ---help--- Enables support for the on-chip EHCI controller on i.MX6 SoCs. diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 2c8fc3c4b1..5f1731023b 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -64,7 +64,7 @@ DECLARE_GLOBAL_DATA_PTR; #define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ #define UCMD_RESET (1 << 1) /* controller reset */ -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) static const unsigned phy_bases[] = { USB_PHY0_BASE_ADDR, USB_PHY1_BASE_ADDR, @@ -247,7 +247,7 @@ int usb_phy_mode(int port) static void usb_oc_config(int index) { -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET); void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]); @@ -328,7 +328,7 @@ int ehci_mx6_common_init(struct usb_ehci *ehci, int index) usb_power_config(index); usb_oc_config(index); -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) usb_internal_phy_clock_gate(index, 1); usb_phy_enable(index, ehci); #endif @@ -341,7 +341,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { enum usb_init_type type; -#if defined(CONFIG_MX6) +#if defined(CONFIG_SOC_IMX6) u32 controller_spacing = 0x200; #elif defined(CONFIG_MX7) u32 controller_spacing = 0x10000; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 2fc0defcd0..31c4bcaafd 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -508,7 +508,7 @@ config VIDEO config VIDEO_IPUV3 bool "i.MX IPUv3 Core video support" - depends on VIDEO && MX6 + depends on VIDEO && SOC_IMX6 help This enables framebuffer driver for i.MX processors working on the IPUv3(Image Processing Unit) internal graphic processor. diff --git a/drivers/video/ipu_regs.h b/drivers/video/ipu_regs.h index 0d3fe069e9..ac3502cb04 100644 --- a/drivers/video/ipu_regs.h +++ b/drivers/video/ipu_regs.h @@ -39,7 +39,7 @@ #define IPU_TPM_REG_BASE 0x01060000 #define IPU_DC_TMPL_REG_BASE 0x01080000 #define IPU_ISP_TBPR_REG_BASE 0x010C0000 -#elif defined(CONFIG_MX6) +#elif defined(CONFIG_SOC_IMX6) #define IPU_CPMEM_REG_BASE 0x00100000 #define IPU_LUT_REG_BASE 0x00120000 #define IPU_SRM_REG_BASE 0x00140000 diff --git a/env/Kconfig b/env/Kconfig index a3c6298273..9054c084a9 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -154,7 +154,7 @@ config ENV_IS_IN_MMC depends on MMC default y if ARCH_SUNXI default y if ARCH_EXYNOS4 - default y if MX6SX || MX7D + default y if SOC_IMX6SX || MX7D default y if TEGRA30 || TEGRA124 default y if TEGRA_ARMV8_COMMON help diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index afc0bae167..5d6a1e9df0 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -153,9 +153,9 @@ "bootz; " \ "fi;\0" \ "findfdt="\ - "if test $board_rev = MX6Q ; then " \ + "if test $board_rev = i.MX6Q ; then " \ "setenv fdtfile imx6q-qmx6.dtb; fi; " \ - "if test $board_rev = MX6DL ; then " \ + "if test $board_rev = i.MX6DL ; then " \ "setenv fdtfile imx6dl-qmx6.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; \0" \ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 4f36930a94..e65cc7b44b 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -151,7 +151,7 @@ "run setupnandboot;" \ "run nandboot;\0" \ "findfdt="\ - "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \ + "if test $board_name = Utilite && test $board_rev = i.MX6Q ; then " \ "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; \0" \ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 8a0ac618e8..c9d60fdd39 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -4,7 +4,7 @@ * Copyright (C) 2014 Advantech * Copyright (C) 2012 Freescale Semiconductor, Inc. * - * Configuration settings for the GE MX6Q Bx50v3 boards. + * Configuration settings for the GE i.MX6Q Bx50v3 boards. * * SPDX-License-Identifier: GPL-2.0+ */ diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 246a636ef0..be89b66e88 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -109,7 +109,7 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#ifdef CONFIG_MX6UL +#ifdef CONFIG_SOC_IMX6UL # define DRAM_OFFSET(x) 0x87##x # define FDT_ADDR __stringify(DRAM_OFFSET(800000)) #else @@ -137,7 +137,7 @@ /* UART */ #ifdef CONFIG_MXC_UART -# ifdef CONFIG_MX6UL +# ifdef CONFIG_SOC_IMX6UL # define CONFIG_MXC_UART_BASE UART1_BASE # else # define CONFIG_MXC_UART_BASE UART4_BASE diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 5a062260fe..fe8d22c47d 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -52,8 +52,8 @@ # endif #endif -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6SL) || \ + defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) #define CONFIG_SPL_BSS_START_ADDR 0x88200000 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ #define CONFIG_SYS_SPL_MALLOC_START 0x88300000 diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 3245f001e8..d503e97fd5 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -7,7 +7,7 @@ #ifndef __MX6_COMMON_H #define __MX6_COMMON_H -#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) +#if (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ #define COUNTER_FREQUENCY CONFIG_SC_TIMER_CLK #else @@ -27,8 +27,8 @@ #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> -#ifndef CONFIG_MX6 -#define CONFIG_MX6 +#ifndef CONFIG_SOC_IMX6 +#define CONFIG_SOC_IMX6 #endif #define CONFIG_SYS_FSL_CLK @@ -40,9 +40,9 @@ #define CONFIG_REVISION_TAG /* Boot options */ -#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ - defined(CONFIG_MX6SX) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) +#if defined(CONFIG_SOC_IMX6SL) || defined(CONFIG_SOC_IMX6SLL) || \ + defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ + defined(CONFIG_SOC_IMX6ULL) #define CONFIG_LOADADDR 0x82000000 #else #define CONFIG_LOADADDR 0x12000000 diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 0e1d18cad8..7e99b33c96 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -103,17 +103,17 @@ "fi; " \ "fi\0" \ "findfdt="\ - "if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \ + "if test $board_name = HUMMINGBOARD2 && test $board_rev = i.MX6Q ; then " \ "setenv fdtfile imx6q-hummingboard2.dtb; fi; " \ - "if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \ + "if test $board_name = HUMMINGBOARD2 && test $board_rev = i.MX6DL ; then " \ "setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \ - "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \ + "if test $board_name = HUMMINGBOARD && test $board_rev = i.MX6Q ; then " \ "setenv fdtfile imx6q-hummingboard.dtb; fi; " \ - "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \ + "if test $board_name = HUMMINGBOARD && test $board_rev = i.MX6DL ; then " \ "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \ - "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \ + "if test $board_name = CUBOXI && test $board_rev = i.MX6Q ; then " \ "setenv fdtfile imx6q-cubox-i.dtb; fi; " \ - "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \ + "if test $board_name = CUBOXI && test $board_rev = i.MX6DL ; then " \ "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; \0" \ diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h index 5be8ce419d..2758887c03 100644 --- a/include/configs/mx6memcal.h +++ b/include/configs/mx6memcal.h @@ -26,7 +26,7 @@ #define CONFIG_MXC_UART #ifdef CONFIG_SERIAL_CONSOLE_UART1 -#if defined(CONFIG_MX6SL) +#if defined(CONFIG_SOC_IMX6SL) #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR #else #define CONFIG_MXC_UART_BASE UART1_BASE diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index d976e77aef..4f707dde4e 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -140,17 +140,17 @@ "fi;\0" \ "findfdt="\ "if test $fdt_file = undefined; then " \ - "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \ + "if test $board_name = SABREAUTO && test $board_rev = i.MX6QP; then " \ "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \ - "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \ + "if test $board_name = SABREAUTO && test $board_rev = i.MX6Q; then " \ "setenv fdt_file imx6q-sabreauto.dtb; fi; " \ - "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \ + "if test $board_name = SABREAUTO && test $board_rev = i.MX6DL; then " \ "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \ - "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \ + "if test $board_name = SABRESD && test $board_rev = i.MX6QP; then " \ "setenv fdt_file imx6qp-sabresd.dtb; fi; " \ - "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \ + "if test $board_name = SABRESD && test $board_rev = i.MX6Q; then " \ "setenv fdt_file imx6q-sabresd.dtb; fi; " \ - "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \ + "if test $board_name = SABRESD && test $board_rev = i.MX6DL; then " \ "setenv fdt_file imx6dl-sabresd.dtb; fi; " \ "if test $fdt_file = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; " \ diff --git a/include/configs/titanium.h b/include/configs/titanium.h index 0fe40ee72f..f2e6bc480e 100644 --- a/include/configs/titanium.h +++ b/include/configs/titanium.h @@ -15,7 +15,7 @@ #include "mx6_common.h" -#define CONFIG_MX6Q +#define CONFIG_SOC_IMX6Q /* Provide the MACH_TYPE value that the vendor kernel requires. */ #define CONFIG_MACH_TYPE 3769 diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 989014a177..0b0ff12331 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -124,9 +124,9 @@ "bootz; " \ "fi;\0" \ "findfdt=" \ - "if test $board_rev = MX6Q ; then " \ + "if test $board_rev = i.MX6Q ; then " \ "setenv fdt_file imx6q-udoo.dtb; fi; " \ - "if test $board_rev = MX6DL ; then " \ + "if test $board_rev = i.MX6DL ; then " \ "setenv fdt_file imx6dl-udoo.dtb; fi; " \ "if test $fdt_file = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; \0" diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 487cb1f5df..36a342b9ab 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -106,19 +106,19 @@ "fi; " \ "fi\0" \ "findfdt="\ - "if test $board_name = D1 && test $board_rev = MX6QP ; then " \ + "if test $board_name = D1 && test $board_rev = i.MX6QP ; then " \ "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \ - "if test $board_name = D1 && test $board_rev = MX6Q ; then " \ + "if test $board_name = D1 && test $board_rev = i.MX6Q ; then " \ "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \ - "if test $board_name = D1 && test $board_rev = MX6DL ; then " \ + "if test $board_name = D1 && test $board_rev = i.MX6DL ; then " \ "setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \ - "if test $board_name = C1 && test $board_rev = MX6Q ; then " \ + "if test $board_name = C1 && test $board_rev = i.MX6Q ; then " \ "setenv fdtfile imx6q-wandboard.dtb; fi; " \ - "if test $board_name = C1 && test $board_rev = MX6DL ; then " \ + "if test $board_name = C1 && test $board_rev = i.MX6DL ; then " \ "setenv fdtfile imx6dl-wandboard.dtb; fi; " \ - "if test $board_name = B1 && test $board_rev = MX6Q ; then " \ + "if test $board_name = B1 && test $board_rev = i.MX6Q ; then " \ "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \ - "if test $board_name = B1 && test $board_rev = MX6DL ; then " \ + "if test $board_name = B1 && test $board_rev = i.MX6DL ; then " \ "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; \0" \ diff --git a/include/fsl_sec.h b/include/fsl_sec.h index 4cbdb2d65a..e561768961 100644 --- a/include/fsl_sec.h +++ b/include/fsl_sec.h @@ -152,7 +152,7 @@ typedef struct ccsr_sec { struct jr_regs { #if defined(CONFIG_SYS_FSL_SEC_LE) && \ - !(defined(CONFIG_MX6) || defined(CONFIG_MX7)) + !(defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) u32 irba_l; u32 irba_h; #else @@ -166,7 +166,7 @@ struct jr_regs { u32 rsvd3; u32 irja; #if defined(CONFIG_SYS_FSL_SEC_LE) && \ - !(defined(CONFIG_MX6) || defined(CONFIG_MX7)) + !(defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) u32 orba_l; u32 orba_h; #else @@ -199,7 +199,7 @@ struct jr_regs { */ struct sg_entry { #if defined(CONFIG_SYS_FSL_SEC_LE) && \ - !(defined(CONFIG_MX6) || defined(CONFIG_MX7)) + !(defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) uint32_t addr_lo; /* Memory Address - lo */ uint32_t addr_hi; /* Memory Address of start of buffer - hi */ #else @@ -220,7 +220,7 @@ struct sg_entry { #define BLOB_SIZE(x) ((x) + 32 + 16) /* Blob buffer size */ -#if defined(CONFIG_MX6) || defined(CONFIG_MX7) +#if defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7) /* Job Ring Base Address */ #define JR_BASE_ADDR(x) (CONFIG_SYS_FSL_SEC_ADDR + 0x1000 * (x + 1)) /* Secure Memory Offset varies accross versions */ diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig index fde1ac108d..6c4b86edb8 100644 --- a/lib/rsa/Kconfig +++ b/lib/rsa/Kconfig @@ -1,6 +1,6 @@ config RSA bool "Use RSA Library" - select RSA_FREESCALE_EXP if FSL_CAAM && !ARCH_MX7 && !ARCH_MX6 && !ARCH_MX5 + select RSA_FREESCALE_EXP if FSL_CAAM && !ARCH_MX7 && !ARCH_IMX6 && !ARCH_MX5 select RSA_SOFTWARE_EXP if !RSA_FREESCALE_EXP help RSA support. This enables the RSA algorithm used for FIT image @@ -29,7 +29,7 @@ config RSA_SOFTWARE_EXP config RSA_FREESCALE_EXP bool "Enable RSA Modular Exponentiation with FSL crypto accelerator" - depends on DM && RSA && FSL_CAAM && !ARCH_MX7 && !ARCH_MX6 && !ARCH_MX5 + depends on DM && RSA && FSL_CAAM && !ARCH_MX7 && !ARCH_IMX6 && !ARCH_MX5 help Enables driver for RSA modular exponentiation using Freescale cryptographic accelerator - CAAM. -- 2.14.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures 2018-03-26 12:16 ` [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures Jagan Teki @ 2018-03-26 12:37 ` Stefano Babic 2018-03-26 12:39 ` Stefano Babic 1 sibling, 0 replies; 10+ messages in thread From: Stefano Babic @ 2018-03-26 12:37 UTC (permalink / raw) To: u-boot Hi Jagan, sorry, I see patch is already V3, I have missed the previous ones. Anyway: On 26/03/2018 14:16, Jagan Teki wrote: > ARCH_MX6 -> ARCH_IMX6 > MX6 -> SOC_IMX6 > MX6D -> SOC_IMX6D > MX6DL -> SOC_IMX6DL > MX6Q -> SOC_IMX6Q > MX6S -> SOC_IMX6S I do not understand which is the added value for this patchset, except that it could potentially break many boards. I can understand if there would be a name conflict with some other SOCs, but there is not. Why should we soo in this way ? > MX6SL -> SOC_IMX6SL > MX6Sx -> SOC_IMX6SX > MX6SLL -> SOC_IMX6SLL > MX6UL -> SOC_IMX6UL > MX6UL_LITESOM -> SOC_IMX6UL_LITESOM > MX6UL_OPOS6UL -> SOC_IMX6UL_OPOS6UL Well, and this is completely wrong. LITESOM is a SOM, not a SOC. So to be honest, we should have the hierarchy SOC (MX6UL) ==> SOM (LITESOM). But we have already, because both MX6UL and MX6UL_LITESOM are defined. IMHO this change would like to clean up, but it adds more confusion. Best regards, Stefano Babic > MX6ULL -> SOC_IMX6ULL > "MX6" -> "i.MX6" > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Makefile | 2 +- > arch/arm/Kconfig | 6 +- > arch/arm/dts/Makefile | 2 +- > arch/arm/include/asm/arch-mx6/crm_regs.h | 46 +++++----- > arch/arm/include/asm/arch-mx6/imx-rdc.h | 4 +- > arch/arm/include/asm/arch-mx6/imx-regs.h | 69 ++++++++------- > arch/arm/include/asm/arch-mx6/mx6-ddr.h | 20 ++--- > arch/arm/include/asm/arch-mx6/mx6-pins.h | 18 ++-- > arch/arm/include/asm/arch-mx6/mx6_plugin.S | 6 +- > arch/arm/include/asm/arch-mx6/mx6dl-ddr.h | 4 +- > arch/arm/include/asm/arch-mx6/mx6q-ddr.h | 2 +- > arch/arm/include/asm/arch-mx6/mx6sl-ddr.h | 2 +- > arch/arm/include/asm/arch-mx6/mx6sx-ddr.h | 2 +- > arch/arm/include/asm/arch-mx6/mx6ul-ddr.h | 2 +- > arch/arm/include/asm/mach-imx/dma.h | 2 +- > arch/arm/include/asm/mach-imx/iomux-v3.h | 11 +-- > arch/arm/include/asm/mach-imx/mxc_i2c.h | 2 +- > arch/arm/include/asm/mach-imx/regs-apbh.h | 6 +- > arch/arm/include/asm/mach-imx/regs-bch.h | 4 +- > arch/arm/include/asm/mach-imx/regs-lcdif.h | 21 +++-- > arch/arm/include/asm/mach-imx/sys_proto.h | 6 +- > arch/arm/mach-imx/Kconfig | 12 +-- > arch/arm/mach-imx/Makefile | 2 +- > arch/arm/mach-imx/cache.c | 2 +- > arch/arm/mach-imx/cpu.c | 6 +- > arch/arm/mach-imx/init.c | 2 +- > arch/arm/mach-imx/iomux-v3.c | 6 +- > arch/arm/mach-imx/mx6/Kconfig | 100 +++++++++++----------- > arch/arm/mach-imx/mx6/Makefile | 4 +- > arch/arm/mach-imx/mx6/clock.c | 14 +-- > arch/arm/mach-imx/mx6/ddr.c | 20 +++-- > arch/arm/mach-imx/mx6/soc.c | 6 +- > arch/arm/mach-imx/spl.c | 8 +- > arch/arm/mach-imx/timer.c | 2 +- > board/bachmann/ot1200/ot1200_spl.c | 4 +- > board/barco/platinum/spl_picon.c | 4 +- > board/barco/platinum/spl_titanium.c | 4 +- > board/boundary/nitrogen6x/ddr-setup.cfg | 8 +- > board/compulab/cm_fx6/cm_fx6.c | 6 +- > board/congatec/cgtqmx6eval/cgtqmx6eval.c | 4 +- > board/dhelectronics/dh_imx6/dh_imx6.c | 4 +- > board/engicam/common/spl.c | 24 +++--- > board/freescale/mx6memcal/spl.c | 6 +- > board/freescale/mx6qarm2/mx6qarm2.c | 8 +- > board/freescale/mx6sabreauto/mx6sabreauto.c | 8 +- > board/freescale/mx6sabresd/mx6sabresd.c | 8 +- > board/freescale/mx6sllevk/mx6sllevk.c | 2 +- > board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 2 +- > board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- > board/freescale/mx6ul_14x14_evk/README | 6 +- > board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 4 +- > board/freescale/mx6ullevk/README | 6 +- > board/freescale/mx6ullevk/mx6ullevk.c | 2 +- > board/gateworks/gw_ventana/gw_ventana_spl.c | 4 +- > board/kosagi/novena/novena_spl.c | 4 +- > board/liebherr/mccmon6/spl.c | 4 +- > board/logicpd/imx6/imx6logic.c | 2 +- > board/seco/Kconfig | 6 +- > board/solidrun/mx6cuboxi/mx6cuboxi.c | 10 +-- > board/tbs/tbs2910/Kconfig | 2 +- > board/toradex/apalis_imx6/ddr-setup.cfg | 8 +- > board/toradex/colibri_imx6/ddr-setup.cfg | 8 +- > board/tqc/tqma6/Kconfig | 6 +- > board/udoo/README | 4 +- > board/udoo/udoo.c | 4 +- > board/udoo/udoo_spl.c | 4 +- > board/wandboard/spl.c | 8 +- > board/wandboard/wandboard.c | 6 +- > cmd/fastboot/Kconfig | 3 +- > common/spl/Kconfig | 6 +- > common/spl/spl.c | 2 +- > configs/apalis_imx6_defconfig | 4 +- > configs/apalis_imx6_nospl_com_defconfig | 4 +- > configs/apalis_imx6_nospl_it_defconfig | 4 +- > configs/aristainetos2_defconfig | 4 +- > configs/aristainetos2b_defconfig | 4 +- > configs/aristainetos_defconfig | 4 +- > configs/cgtqmx6eval_defconfig | 2 +- > configs/cm_fx6_defconfig | 2 +- > configs/colibri_imx6_defconfig | 4 +- > configs/colibri_imx6_nospl_defconfig | 4 +- > configs/dh_imx6_defconfig | 2 +- > configs/display5_defconfig | 4 +- > configs/display5_factory_defconfig | 4 +- > configs/dms-ba16-1g_defconfig | 2 +- > configs/dms-ba16_defconfig | 2 +- > configs/ge_b450v3_defconfig | 2 +- > configs/ge_b650v3_defconfig | 2 +- > configs/ge_b850v3_defconfig | 2 +- > configs/gwventana_emmc_defconfig | 2 +- > configs/gwventana_gw5904_defconfig | 2 +- > configs/gwventana_nand_defconfig | 2 +- > configs/imx6dl_icore_nand_defconfig | 2 +- > configs/imx6q_icore_nand_defconfig | 2 +- > configs/imx6q_logic_defconfig | 4 +- > configs/imx6qdl_icore_mipi_defconfig | 2 +- > configs/imx6qdl_icore_mmc_defconfig | 2 +- > configs/imx6qdl_icore_nand_defconfig | 2 +- > configs/imx6qdl_icore_rqs_defconfig | 2 +- > configs/imx6ul_geam_mmc_defconfig | 2 +- > configs/imx6ul_geam_nand_defconfig | 2 +- > configs/imx6ul_isiot_emmc_defconfig | 2 +- > configs/imx6ul_isiot_nand_defconfig | 2 +- > configs/liteboard_defconfig | 2 +- > configs/marsboard_defconfig | 4 +- > configs/mccmon6_nor_defconfig | 2 +- > configs/mccmon6_sd_defconfig | 2 +- > configs/mx6cuboxi_defconfig | 2 +- > configs/mx6dlarm2_defconfig | 4 +- > configs/mx6dlarm2_lpddr2_defconfig | 4 +- > configs/mx6memcal_defconfig | 4 +- > configs/mx6qarm2_defconfig | 4 +- > configs/mx6qarm2_lpddr2_defconfig | 4 +- > configs/mx6qsabrelite_defconfig | 4 +- > configs/mx6sabreauto_defconfig | 2 +- > configs/mx6sabresd_defconfig | 2 +- > configs/mx6slevk_defconfig | 2 +- > configs/mx6slevk_spinor_defconfig | 2 +- > configs/mx6slevk_spl_defconfig | 2 +- > configs/mx6sllevk_defconfig | 2 +- > configs/mx6sllevk_plugin_defconfig | 2 +- > configs/mx6sxsabreauto_defconfig | 2 +- > configs/mx6sxsabresd_defconfig | 2 +- > configs/mx6sxsabresd_spl_defconfig | 2 +- > configs/mx6ul_14x14_evk_defconfig | 2 +- > configs/mx6ul_9x9_evk_defconfig | 2 +- > configs/mx6ull_14x14_evk_defconfig | 2 +- > configs/mx6ull_14x14_evk_plugin_defconfig | 2 +- > configs/nitrogen6dl2g_defconfig | 4 +- > configs/nitrogen6dl_defconfig | 4 +- > configs/nitrogen6q2g_defconfig | 4 +- > configs/nitrogen6q_defconfig | 4 +- > configs/nitrogen6s1g_defconfig | 4 +- > configs/nitrogen6s_defconfig | 4 +- > configs/novena_defconfig | 4 +- > configs/opos6uldev_defconfig | 2 +- > configs/ot1200_defconfig | 4 +- > configs/ot1200_spl_defconfig | 4 +- > configs/pcm058_defconfig | 4 +- > configs/pfla02_defconfig | 2 +- > configs/pico-imx6ul_defconfig | 2 +- > configs/platinum_picon_defconfig | 4 +- > configs/platinum_titanium_defconfig | 4 +- > configs/riotboard_defconfig | 4 +- > configs/secomx6quq7_defconfig | 4 +- > configs/sksimx6_defconfig | 4 +- > configs/tbs2910_defconfig | 2 +- > configs/titanium_defconfig | 2 +- > configs/tqma6dl_mba6_mmc_defconfig | 2 +- > configs/tqma6dl_mba6_spi_defconfig | 2 +- > configs/tqma6q_mba6_mmc_defconfig | 2 +- > configs/tqma6q_mba6_spi_defconfig | 2 +- > configs/tqma6s_mba6_mmc_defconfig | 2 +- > configs/tqma6s_mba6_spi_defconfig | 2 +- > configs/tqma6s_wru4_mmc_defconfig | 2 +- > configs/udoo_defconfig | 2 +- > configs/udoo_neo_defconfig | 2 +- > configs/vining_2000_defconfig | 2 +- > configs/wandboard_defconfig | 2 +- > configs/warp_defconfig | 2 +- > configs/xpress_defconfig | 2 +- > configs/xpress_spl_defconfig | 2 +- > configs/zc5202_defconfig | 4 +- > configs/zc5601_defconfig | 4 +- > doc/README.imx6 | 2 +- > doc/README.imximage | 4 +- > drivers/ata/dwc_ahsata.c | 2 +- > drivers/crypto/fsl/jobdesc.c | 2 +- > drivers/dma/Kconfig | 2 +- > drivers/dma/apbh_dma.c | 2 +- > drivers/gpio/mxc_gpio.c | 23 ++--- > drivers/i2c/Kconfig | 2 +- > drivers/misc/mxc_ocotp.c | 8 +- > drivers/mmc/Kconfig | 6 +- > drivers/mtd/nand/Kconfig | 6 +- > drivers/mtd/nand/mxs_nand.c | 2 +- > drivers/net/Kconfig | 2 +- > drivers/net/fec_mxc.c | 2 +- > drivers/net/fec_mxc.h | 4 +- > drivers/pci/pcie_imx.c | 14 +-- > drivers/pinctrl/nxp/Kconfig | 2 +- > drivers/pwm/pwm-imx-util.c | 4 +- > drivers/serial/Kconfig | 2 +- > drivers/spi/fsl_qspi.c | 18 ++-- > drivers/thermal/Kconfig | 2 +- > drivers/thermal/imx_thermal.c | 2 +- > drivers/usb/host/Kconfig | 4 +- > drivers/usb/host/ehci-mx6.c | 8 +- > drivers/video/Kconfig | 2 +- > drivers/video/ipu_regs.h | 2 +- > env/Kconfig | 2 +- > include/configs/cgtqmx6eval.h | 4 +- > include/configs/cm_fx6.h | 2 +- > include/configs/ge_bx50v3.h | 2 +- > include/configs/imx6-engicam.h | 4 +- > include/configs/imx6_spl.h | 4 +- > include/configs/mx6_common.h | 12 +-- > include/configs/mx6cuboxi.h | 12 +-- > include/configs/mx6memcal.h | 2 +- > include/configs/mx6sabre_common.h | 12 +-- > include/configs/titanium.h | 2 +- > include/configs/udoo.h | 4 +- > include/configs/wandboard.h | 14 +-- > include/fsl_sec.h | 8 +- > lib/rsa/Kconfig | 4 +- > 205 files changed, 552 insertions(+), 545 deletions(-) > > diff --git a/Makefile b/Makefile > index 5fa14789d9..a969fef1dd 100644 > --- a/Makefile > +++ b/Makefile > @@ -778,7 +778,7 @@ ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl > endif > endif > ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin > -ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy) > +ifeq ($(CONFIG_SOC_IMX6)$(CONFIG_SECURE_BOOT), yy) > ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img > else > ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index b8f7a982d9..ad7f0c1f7d 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -641,8 +641,8 @@ config ARCH_MX7 > select ARCH_MISC_INIT > imply MXC_GPIO > > -config ARCH_MX6 > - bool "Freescale MX6" > +config ARCH_IMX6 > + bool "Freescale i.MX6" > select CPU_V7 > select SYS_FSL_HAS_SEC if SECURE_BOOT > select SYS_FSL_SEC_COMPAT_4 > @@ -650,7 +650,7 @@ config ARCH_MX6 > select SYS_THUMB_BUILD if SPL > imply MXC_GPIO > > -if ARCH_MX6 > +if ARCH_IMX6 > config SPL_LDSCRIPT > default "arch/arm/mach-omap2/u-boot-spl.lds" > endif > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 7dd1dffae5..7a5f0a36a3 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -385,7 +385,7 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \ > > dtb-$(CONFIG_MX53) += imx53-cx9020.dtb > > -dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \ > +dtb-$(CONFIG_SOC_IMX6) += imx6ull-14x14-evk.dtb \ > imx6sl-evk.dtb \ > imx6sll-evk.dtb \ > imx6dl-icore.dtb \ > diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h > index 74ed91230f..e5f699f691 100644 > --- a/arch/arm/include/asm/arch-mx6/crm_regs.h > +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h > @@ -205,7 +205,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CCR_WB_COUNT_MASK 0x7 > #define MXC_CCM_CCR_WB_COUNT_OFFSET (1 << 16) > #define MXC_CCM_CCR_COSC_EN (1 << 12) > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCR_OSCNT_MASK 0x7F > #else > #define MXC_CCM_CCR_OSCNT_MASK 0xFF > @@ -275,7 +275,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CBCMR_PERIPH2_CLK2_SEL (1 << 20) > #define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK (0x3 << 18) > #define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET 18 > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 16) > #define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET 16 > #define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14) > @@ -283,7 +283,7 @@ struct mxc_ccm_reg { > #endif > #define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK (0x3 << 12) > #define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET 12 > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CBCMR_VDOAXI_CLK_SEL (1 << 11) > #endif > #define MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL (1 << 10) > @@ -336,7 +336,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CSCMR1_PERCLK_PODF_MASK 0x3F > > /* Define the bits in register CSCMR2 */ > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define MXC_CCM_CSCMR2_VID_CLK_SEL_MASK (0x7 << 21) > #define MXC_CCM_CSCMR2_VID_CLK_SEL_OFFSET 21 > #endif > @@ -352,7 +352,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET 2 > > /* Define the bits in register CSCDR1 */ > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CSCDR1_VPU_AXI_PODF_MASK (0x7 << 25) > #define MXC_CCM_CSCDR1_VPU_AXI_PODF_OFFSET 25 > #endif > @@ -370,7 +370,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET 16 > #define MXC_CCM_CSCDR1_USDHC1_PODF_MASK (0x7 << 11) > #define MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET 11 > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET 8 > #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) > #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6 > @@ -382,7 +382,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) > > /* Define the bits in register CS1CDR */ > -/* MX6UL, !MX6ULL */ > +/* i.MX6UL, !i.MX6ULL */ > #define MXC_CCM_CS1CDR_SAI3_CLK_PRED_MASK (0x7 << 22) > #define MXC_CCM_CS1CDR_SAI3_CLK_PRED_OFFSET 22 > #define MXC_CCM_CS1CDR_SAI3_CLK_PODF_MASK (0x3F << 16) > @@ -454,7 +454,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET 0 > > /* Define the bits in register CDCDR */ > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CDCDR_HSI_TX_PODF_MASK (0x7 << 29) > #define MXC_CCM_CDCDR_HSI_TX_PODF_OFFSET 29 > #define MXC_CCM_CDCDR_HSI_TX_CLK_SEL (1 << 28) > @@ -572,7 +572,7 @@ struct mxc_ccm_reg { > /* Define the bits in register CDHIPR */ > #define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16) > #define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CDHIPR_MMDC_CH0_PODF_BUSY (1 << 4) > #endif > #define MXC_CCM_CDHIPR_PERIPH2_CLK_SEL_BUSY (1 << 3) > @@ -583,14 +583,14 @@ struct mxc_ccm_reg { > /* Define the bits in register CLPCR */ > #define MXC_CCM_CLPCR_MASK_L2CC_IDLE (1 << 27) > #define MXC_CCM_CLPCR_MASK_SCU_IDLE (1 << 26) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CLPCR_MASK_CORE3_WFI (1 << 25) > #define MXC_CCM_CLPCR_MASK_CORE2_WFI (1 << 24) > #define MXC_CCM_CLPCR_MASK_CORE1_WFI (1 << 23) > #endif > #define MXC_CCM_CLPCR_MASK_CORE0_WFI (1 << 22) > #define MXC_CCM_CLPCR_BYP_MMDC_CH1_LPM_HS (1 << 21) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CLPCR_BYP_MMDC_CH0_LPM_HS (1 << 19) > #define MXC_CCM_CLPCR_WB_CORE_AT_LPM (1 << 17) > #endif > @@ -602,7 +602,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CLPCR_DIS_REF_OSC (1 << 7) > #define MXC_CCM_CLPCR_SBYOS (1 << 6) > #define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (1 << 5) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3) > #define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET 3 > #define MXC_CCM_CLPCR_BYPASS_PMIC_VFUNC_READY (1 << 2) > @@ -612,7 +612,7 @@ struct mxc_ccm_reg { > > /* Define the bits in register CISR */ > #define MXC_CCM_CISR_ARM_PODF_LOADED (1 << 26) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CISR_MMDC_CH0_PODF_LOADED (1 << 23) > #endif > #define MXC_CCM_CISR_PERIPH_CLK_SEL_LOADED (1 << 22) > @@ -625,7 +625,7 @@ struct mxc_ccm_reg { > > /* Define the bits in register CIMR */ > #define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (1 << 26) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CIMR_MASK_MMDC_CH0_PODF_LOADED (1 << 23) > #endif > #define MXC_CCM_CIMR_MASK_PERIPH_CLK_SEL_LOADED (1 << 22) > @@ -692,7 +692,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CCGR0_DCIC1_MASK (3 << MXC_CCM_CCGR0_DCIC1_OFFSET) > #define MXC_CCM_CCGR0_DCIC2_OFFSET 26 > #define MXC_CCM_CCGR0_DCIC2_MASK (3 << MXC_CCM_CCGR0_DCIC2_OFFSET) > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR0_AIPS_TZ3_OFFSET 30 > #define MXC_CCM_CCGR0_AIPS_TZ3_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ3_OFFSET) > #else > @@ -719,7 +719,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CCGR1_EPIT2S_MASK (3 << MXC_CCM_CCGR1_EPIT2S_OFFSET) > #define MXC_CCM_CCGR1_ESAIS_OFFSET 16 > #define MXC_CCM_CCGR1_ESAIS_MASK (3 << MXC_CCM_CCGR1_ESAIS_OFFSET) > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR1_WAKEUP_OFFSET 18 > #define MXC_CCM_CCGR1_WAKEUP_MASK (3 << MXC_CCM_CCGR1_WAKEUP_OFFSET) > #endif > @@ -727,13 +727,13 @@ struct mxc_ccm_reg { > #define MXC_CCM_CCGR1_GPT_BUS_MASK (3 << MXC_CCM_CCGR1_GPT_BUS_OFFSET) > #define MXC_CCM_CCGR1_GPT_SERIAL_OFFSET 22 > #define MXC_CCM_CCGR1_GPT_SERIAL_MASK (3 << MXC_CCM_CCGR1_GPT_SERIAL_OFFSET) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR1_GPU2D_OFFSET 24 > #define MXC_CCM_CCGR1_GPU2D_MASK (3 << MXC_CCM_CCGR1_GPU2D_OFFSET) > #endif > #define MXC_CCM_CCGR1_GPU3D_OFFSET 26 > #define MXC_CCM_CCGR1_GPU3D_MASK (3 << MXC_CCM_CCGR1_GPU3D_OFFSET) > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR1_OCRAM_S_OFFSET 28 > #define MXC_CCM_CCGR1_OCRAM_S_MASK (3 << MXC_CCM_CCGR1_OCRAM_S_OFFSET) > #define MXC_CCM_CCGR1_CANFD_OFFSET 30 > @@ -746,7 +746,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CCGR2_CSI_OFFSET 2 > #define MXC_CCM_CCGR2_CSI_MASK (3 << MXC_CCM_CCGR2_CSI_OFFSET) > > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET 4 > #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET) > #endif > @@ -839,7 +839,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CCGR3_MLB_MASK (3 << MXC_CCM_CCGR3_MLB_OFFSET) > #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET 20 > #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET 22 > #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET) > #endif > @@ -864,7 +864,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CCGR3_GPIO4_CLK_OFFSET 30 > #define MXC_CCM_CCGR3_GPIO4_CLK_MASK (3 << MXC_CCM_CCGR3_GPIO4_CLK_OFFSET) > > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET 30 > #define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET) > #endif > @@ -903,7 +903,7 @@ struct mxc_ccm_reg { > > #define MXC_CCM_CCGR5_ROM_OFFSET 0 > #define MXC_CCM_CCGR5_ROM_MASK (3 << MXC_CCM_CCGR5_ROM_OFFSET) > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR5_SATA_OFFSET 4 > #define MXC_CCM_CCGR5_SATA_MASK (3 << MXC_CCM_CCGR5_SATA_OFFSET) > #endif > @@ -923,7 +923,7 @@ struct mxc_ccm_reg { > #define MXC_CCM_CCGR5_UART_MASK (3 << MXC_CCM_CCGR5_UART_OFFSET) > #define MXC_CCM_CCGR5_UART_SERIAL_OFFSET 26 > #define MXC_CCM_CCGR5_UART_SERIAL_MASK (3 << MXC_CCM_CCGR5_UART_SERIAL_OFFSET) > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define MXC_CCM_CCGR5_SAI1_OFFSET 20 > #define MXC_CCM_CCGR5_SAI1_MASK (3 << MXC_CCM_CCGR5_SAI1_OFFSET) > #define MXC_CCM_CCGR5_SAI2_OFFSET 30 > diff --git a/arch/arm/include/asm/arch-mx6/imx-rdc.h b/arch/arm/include/asm/arch-mx6/imx-rdc.h > index c4d3bb44b4..d69a92b562 100644 > --- a/arch/arm/include/asm/arch-mx6/imx-rdc.h > +++ b/arch/arm/include/asm/arch-mx6/imx-rdc.h > @@ -7,10 +7,10 @@ > #ifndef __IMX_RDC_H__ > #define __IMX_RDC_H__ > > -#if defined(CONFIG_MX6SX) > +#if defined(CONFIG_SOC_IMX6SX) > #include "mx6sx_rdc.h" > #else > #error "Please select cpu" > -#endif /* CONFIG_MX6SX */ > +#endif /* CONFIG_SOC_IMX6SX */ > > #endif /* __IMX_RDC_H__*/ > diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h > index 8513406a8e..1605032a6e 100644 > --- a/arch/arm/include/asm/arch-mx6/imx-regs.h > +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h > @@ -12,12 +12,13 @@ > #define ROMCP_ARB_BASE_ADDR 0x00000000 > #define ROMCP_ARB_END_ADDR 0x000FFFFF > > -#ifdef CONFIG_MX6SL > +#ifdef CONFIG_SOC_IMX6SL > #define GPU_2D_ARB_BASE_ADDR 0x02200000 > #define GPU_2D_ARB_END_ADDR 0x02203FFF > #define OPENVG_ARB_BASE_ADDR 0x02204000 > #define OPENVG_ARB_END_ADDR 0x02207FFF > -#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#elif (defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL)) > #define CAAM_ARB_BASE_ADDR 0x00100000 > #define CAAM_ARB_END_ADDR 0x00107FFF > #define GPU_ARB_BASE_ADDR 0x01800000 > @@ -26,7 +27,7 @@ > #define APBH_DMA_ARB_END_ADDR 0x0180BFFF > #define M4_BOOTROM_BASE_ADDR 0x007F8000 > > -#elif !defined(CONFIG_MX6SLL) > +#elif !defined(CONFIG_SOC_IMX6SLL) > #define CAAM_ARB_BASE_ADDR 0x00100000 > #define CAAM_ARB_END_ADDR 0x00103FFF > #define APBH_DMA_ARB_BASE_ADDR 0x00110000 > @@ -39,16 +40,16 @@ > #define GPU_2D_ARB_END_ADDR 0x00137FFF > #define DTCP_ARB_BASE_ADDR 0x00138000 > #define DTCP_ARB_END_ADDR 0x0013BFFF > -#endif /* CONFIG_MX6SL */ > +#endif /* CONFIG_SOC_IMX6SL */ > > #define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR > #define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) > #define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) > > /* GPV - PL301 configuration ports */ > -#if (defined(CONFIG_MX6SX) || \ > - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ > - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)) > +#if (defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX6SL) || \ > + defined(CONFIG_SOC_IMX6SLL)) > #define GPV2_BASE_ADDR 0x00D00000 > #define GPV3_BASE_ADDR 0x00E00000 > #define GPV4_BASE_ADDR 0x00F00000 > @@ -82,19 +83,19 @@ > /* AIPS3 only on i.MX6SX */ > #define AIPS3_ARB_BASE_ADDR 0x02200000 > #define AIPS3_ARB_END_ADDR 0x022FFFFF > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define WEIM_ARB_BASE_ADDR 0x50000000 > #define WEIM_ARB_END_ADDR 0x57FFFFFF > #define QSPI0_AMBA_BASE 0x60000000 > #define QSPI0_AMBA_END 0x6FFFFFFF > #define QSPI1_AMBA_BASE 0x70000000 > #define QSPI1_AMBA_END 0x7FFFFFFF > -#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#elif (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) > #define WEIM_ARB_BASE_ADDR 0x50000000 > #define WEIM_ARB_END_ADDR 0x57FFFFFF > #define QSPI0_AMBA_BASE 0x60000000 > #define QSPI0_AMBA_END 0x6FFFFFFF > -#elif !defined(CONFIG_MX6SLL) > +#elif !defined(CONFIG_SOC_IMX6SLL) > #define SATA_ARB_BASE_ADDR 0x02200000 > #define SATA_ARB_END_ADDR 0x02203FFF > #define OPENVG_ARB_BASE_ADDR 0x02204000 > @@ -109,9 +110,9 @@ > #define WEIM_ARB_END_ADDR 0x0FFFFFFF > #endif > > -#if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \ > - defined(CONFIG_MX6SX) || \ > - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#if (defined(CONFIG_SOC_IMX6SLL) || defined(CONFIG_SOC_IMX6SL) || \ > + defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL)) > #define MMDC0_ARB_BASE_ADDR 0x80000000 > #define MMDC0_ARB_END_ADDR 0xFFFFFFFF > #define MMDC1_ARB_BASE_ADDR 0xC0000000 > @@ -123,7 +124,7 @@ > #define MMDC1_ARB_END_ADDR 0xFFFFFFFF > #endif > > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define IPU_SOC_BASE_ADDR IPU1_ARB_BASE_ADDR > #define IPU_SOC_OFFSET 0x00200000 > #endif > @@ -152,7 +153,7 @@ > #define MX6SLL_UART3_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) > #define MX6SL_UART4_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000) > > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) > #endif > #define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000) > @@ -164,7 +165,7 @@ > #define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) > #define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) > > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000) > #define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000) > #endif > @@ -202,17 +203,17 @@ > #define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000) > #define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000) > #define IOMUXC_GPR_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) > -#ifdef CONFIG_MX6SLL > +#ifdef CONFIG_SOC_IMX6SLL > #define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) > #define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) > #define PXP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000) > #define EPDC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x74000) > #define DCP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x7C000) > -#elif defined(CONFIG_MX6SL) > +#elif defined(CONFIG_SOC_IMX6SL) > #define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) > #define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) > #define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) > -#elif defined(CONFIG_MX6SX) > +#elif defined(CONFIG_SOC_IMX6SX) > #define CANFD1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) > #define SDMA_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) > #define CANFD2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000) > @@ -247,7 +248,7 @@ > #define USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) > > #define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000) > -#ifdef CONFIG_MX6SL > +#ifdef CONFIG_SOC_IMX6SL > #define MSHC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000) > #else > #define MLB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000) > @@ -264,7 +265,7 @@ > #define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000) > /* i.MX6SL/SLL */ > #define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) > -#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#if (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) > #define ENET2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000) > #else > /* i.MX6SX */ > @@ -276,7 +277,7 @@ > #define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000) > #define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000) > #define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000) > -#ifdef CONFIG_MX6SLL > +#ifdef CONFIG_SOC_IMX6SLL > #define IOMUXC_GPR_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000) > #define IOMUXC_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) > #endif > @@ -284,17 +285,17 @@ > #define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) > #define MX6UL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) > #define MX6ULL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define DEBUG_MONITOR_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) > #else > #define IP2APB_PERFMON3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) > #endif > #define IP2APB_TZASC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x50000) > -#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#if (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) > #define SCTR_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000) > #define QSPI0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000) > #define UART6_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000) > -#elif defined(CONFIG_MX6SX) > +#elif defined(CONFIG_SOC_IMX6SX) > #define SAI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000) > #define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000) > #define SAI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000) > @@ -317,7 +318,7 @@ > /* i.MX6SLL */ > #define MTR_MASTER_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000) > > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define GIS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x04000) > #define DCIC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x0C000) > #define DCIC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x10000) > @@ -340,7 +341,7 @@ > #define PWM6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA8000) > #define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000) > #define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000) > -#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#elif (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) > #define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000) > #define DCP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000) > #define RNGB_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000) > @@ -357,9 +358,9 @@ > #define MX6SX_LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000) > #define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000) > > -#if !(defined(CONFIG_MX6SX) || \ > - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ > - defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL)) > +#if !(defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX6SLL) || \ > + defined(CONFIG_SOC_IMX6SL)) > #define IRAM_SIZE 0x00040000 > #else > #define IRAM_SIZE 0x00020000 > @@ -578,7 +579,8 @@ struct src { > #define IOMUXC_GPR12_LOS_LEVEL (0x1f << 4) > > struct iomuxc { > -#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#if (defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL)) > u8 reserved[0x4000]; > #endif > u32 gpr[14]; > @@ -704,8 +706,9 @@ struct cspi_regs { > #define MXC_CSPICON_POL 4 /* SCLK polarity */ > #define MXC_CSPICON_SSPOL 12 /* SS polarity */ > #define MXC_CSPICON_CTL 20 /* inactive state of SCLK */ > -#if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \ > - defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#if defined(CONFIG_SOC_IMX6SLL) || defined(CONFIG_SOC_IMX6SL) || \ > + defined(CONFIG_SOC_IMX6DL) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL) > #define MXC_SPI_BASE_ADDRESSES \ > ECSPI1_BASE_ADDR, \ > ECSPI2_BASE_ADDR, \ > diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h > index 19d2f1d9c5..c0aa870b62 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h > +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h > @@ -7,27 +7,27 @@ > #define __ASM_ARCH_MX6_DDR_H__ > > #ifndef CONFIG_SPL_BUILD > -#ifdef CONFIG_MX6Q > +#ifdef CONFIG_SOC_IMX6Q > #include "mx6q-ddr.h" > #else > -#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) > +#if defined(CONFIG_SOC_IMX6DL) || defined(CONFIG_SOC_IMX6S) > #include "mx6dl-ddr.h" > #else > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #include "mx6sx-ddr.h" > #else > -#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#if defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) > #include "mx6ul-ddr.h" > #else > -#ifdef CONFIG_MX6SL > +#ifdef CONFIG_SOC_IMX6SL > #include "mx6sl-ddr.h" > #else > #error "Please select cpu" > -#endif /* CONFIG_MX6SL */ > -#endif /* CONFIG_MX6UL */ > -#endif /* CONFIG_MX6SX */ > -#endif /* CONFIG_MX6DL or CONFIG_MX6S */ > -#endif /* CONFIG_MX6Q */ > +#endif /* CONFIG_SOC_IMX6SL */ > +#endif /* CONFIG_SOC_IMX6UL */ > +#endif /* CONFIG_SOC_IMX6SX */ > +#endif /* CONFIG_SOC_IMX6DL or CONFIG_SOC_IMX6S */ > +#endif /* CONFIG_SOC_IMX6Q */ > #else > > enum { > diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h > index c2ce953206..5426fdb7a5 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6-pins.h > +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h > @@ -11,7 +11,7 @@ > #define MX6_PAD_DECLARE(prefix, name, pco, mc, mm, sio, si, pc) \ > prefix##name = IOMUX_PAD(pco, mc, mm, sio, si, pc) > > -#ifdef CONFIG_MX6QDL > +#ifdef CONFIG_SOC_IMX6QDL > enum { > #define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \ > MX6_PAD_DECLARE(MX6Q_PAD_,name, pco, mc, mm, sio, si, pc), > @@ -21,30 +21,30 @@ enum { > MX6_PAD_DECLARE(MX6DL_PAD_,name, pco, mc, mm, sio, si, pc), > #include "mx6dl_pins.h" > }; > -#elif defined(CONFIG_MX6Q) > +#elif defined(CONFIG_SOC_IMX6Q) > enum { > #define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \ > MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc), > #include "mx6q_pins.h" > }; > -#elif defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) > +#elif defined(CONFIG_SOC_IMX6DL) || defined(CONFIG_SOC_IMX6S) > enum { > #define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \ > MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc), > #include "mx6dl_pins.h" > }; > -#elif defined(CONFIG_MX6SLL) > +#elif defined(CONFIG_SOC_IMX6SLL) > #include "mx6sll_pins.h" > -#elif defined(CONFIG_MX6SL) > +#elif defined(CONFIG_SOC_IMX6SL) > #include "mx6sl_pins.h" > -#elif defined(CONFIG_MX6SX) > +#elif defined(CONFIG_SOC_IMX6SX) > #include "mx6sx_pins.h" > -#elif defined(CONFIG_MX6ULL) > +#elif defined(CONFIG_SOC_IMX6ULL) > #include "mx6ull_pins.h" > -#elif defined(CONFIG_MX6UL) > +#elif defined(CONFIG_SOC_IMX6UL) > #include "mx6ul_pins.h" > #else > #error "Please select cpu" > -#endif /* CONFIG_MX6Q */ > +#endif /* CONFIG_SOC_IMX6Q */ > > #endif /*__ASM_ARCH_MX6_PINS_H__ */ > diff --git a/arch/arm/include/asm/arch-mx6/mx6_plugin.S b/arch/arm/include/asm/arch-mx6/mx6_plugin.S > index b7d1b20315..10a30678fa 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6_plugin.S > +++ b/arch/arm/include/asm/arch-mx6/mx6_plugin.S > @@ -43,7 +43,7 @@ plugin_start: > adr r2, boot_data2 > > #ifdef CONFIG_NOR_BOOT > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > ldr r3, =ROM_VERSION_OFFSET > ldr r4, [r3] > cmp r4, #ROM_VERSION_TO10 > @@ -64,12 +64,12 @@ plugin_start: > before_calling_rom___pu_irom_hwcnfg_setup: > ldr r3, =ROM_VERSION_OFFSET > ldr r4, [r3] > -#if defined(CONFIG_MX6SOLO) || defined(CONFIG_MX6DL) > +#if defined(CONFIG_MX6SOLO) || defined(CONFIG_SOC_IMX6DL) > ldr r3, =ROM_VERSION_TO12 > cmp r4, r3 > ldrge r3, =ROM_API_TABLE_BASE_ADDR_MX6DL_TO12 > ldrlt r3, =ROM_API_TABLE_BASE_ADDR_LEGACY > -#elif defined(CONFIG_MX6Q) > +#elif defined(CONFIG_SOC_IMX6Q) > ldr r3, =ROM_VERSION_TO15 > cmp r4, r3 > ldrge r3, =ROM_API_TABLE_BASE_ADDR_MX6DQ_TO15 > diff --git a/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h > index 1eb4b3c8b3..f82dc45f90 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h > +++ b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h > @@ -6,8 +6,8 @@ > #ifndef __ASM_ARCH_MX6DLS_DDR_H__ > #define __ASM_ARCH_MX6DLS_DDR_H__ > > -#ifndef CONFIG_MX6DL > -#ifndef CONFIG_MX6S > +#ifndef CONFIG_SOC_IMX6DL > +#ifndef CONFIG_SOC_IMX6S > #error "wrong CPU" > #endif > #endif > diff --git a/arch/arm/include/asm/arch-mx6/mx6q-ddr.h b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h > index 0aa94cffe5..a87c6b9ff8 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6q-ddr.h > +++ b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h > @@ -6,7 +6,7 @@ > #ifndef __ASM_ARCH_MX6Q_DDR_H__ > #define __ASM_ARCH_MX6Q_DDR_H__ > > -#ifndef CONFIG_MX6Q > +#ifndef CONFIG_SOC_IMX6Q > #error "wrong CPU" > #endif > > diff --git a/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h b/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h > index c3c4d69818..9f3b41a3e8 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h > +++ b/arch/arm/include/asm/arch-mx6/mx6sl-ddr.h > @@ -7,7 +7,7 @@ > #ifndef __ASM_ARCH_MX6SL_DDR_H__ > #define __ASM_ARCH_MX6SL_DDR_H__ > > -#ifndef CONFIG_MX6SL > +#ifndef CONFIG_SOC_IMX6SL > #error "wrong CPU" > #endif > > diff --git a/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h b/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h > index 2cc94aa4c7..8aa82db6a9 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h > +++ b/arch/arm/include/asm/arch-mx6/mx6sx-ddr.h > @@ -7,7 +7,7 @@ > #ifndef __ASM_ARCH_MX6SX_DDR_H__ > #define __ASM_ARCH_MX6SX_DDR_H__ > > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > #error "wrong CPU" > #endif > > diff --git a/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h b/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h > index 518b81208a..c07f1a9078 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h > +++ b/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h > @@ -7,7 +7,7 @@ > #ifndef __ASM_ARCH_MX6UL_DDR_H__ > #define __ASM_ARCH_MX6UL_DDR_H__ > > -#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#if !(defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) > #error "wrong CPU" > #endif > > diff --git a/arch/arm/include/asm/mach-imx/dma.h b/arch/arm/include/asm/mach-imx/dma.h > index 0244947b6e..ec1d23d6c1 100644 > --- a/arch/arm/include/asm/mach-imx/dma.h > +++ b/arch/arm/include/asm/mach-imx/dma.h > @@ -54,7 +54,7 @@ enum { > MXS_DMA_CHANNEL_AHB_APBH_RESERVED1, > MXS_MAX_DMA_CHANNELS, > }; > -#elif defined(CONFIG_MX6) || defined(CONFIG_MX7) > +#elif defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7) > enum { > MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0, > MXS_DMA_CHANNEL_AHB_APBH_GPMI1, > diff --git a/arch/arm/include/asm/mach-imx/iomux-v3.h b/arch/arm/include/asm/mach-imx/iomux-v3.h > index 0c0ccf4403..9931553f38 100644 > --- a/arch/arm/include/asm/mach-imx/iomux-v3.h > +++ b/arch/arm/include/asm/mach-imx/iomux-v3.h > @@ -134,7 +134,7 @@ typedef u64 iomux_v3_cfg_t; > > #else > > -#ifdef CONFIG_MX6 > +#ifdef CONFIG_SOC_IMX6 > > #define PAD_CTL_HYS (1 << 16) > > @@ -147,7 +147,8 @@ typedef u64 iomux_v3_cfg_t; > > #define PAD_CTL_ODE (1 << 11) > > -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL) > #define PAD_CTL_SPEED_LOW (0 << 6) > #else > #define PAD_CTL_SPEED_LOW (1 << 6) > @@ -257,7 +258,7 @@ void imx_iomux_gpio_get_function(unsigned int gpio, > #endif > > /* macros for declaring and using pinmux array */ > -#if defined(CONFIG_MX6QDL) > +#if defined(CONFIG_SOC_IMX6QDL) > #define IOMUX_PADS(x) (MX6Q_##x), (MX6DL_##x) > #define SETUP_IOMUX_PAD(def) \ > if (is_mx6dq() || is_mx6dqp()) { \ > @@ -267,13 +268,13 @@ if (is_mx6dq() || is_mx6dqp()) { \ > } > #define SETUP_IOMUX_PADS(x) \ > imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)/2) > -#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) > +#elif defined(CONFIG_SOC_IMX6Q) || defined(CONFIG_SOC_IMX6D) > #define IOMUX_PADS(x) MX6Q_##x > #define SETUP_IOMUX_PAD(def) \ > imx_iomux_v3_setup_pad(MX6Q_##def); > #define SETUP_IOMUX_PADS(x) \ > imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)) > -#elif defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#elif defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) > #define IOMUX_PADS(x) MX6_##x > #define SETUP_IOMUX_PAD(def) \ > imx_iomux_v3_setup_pad(MX6_##def); > diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h b/arch/arm/include/asm/mach-imx/mxc_i2c.h > index 80018e4a14..bce661c6d3 100644 > --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h > +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h > @@ -59,7 +59,7 @@ struct mxc_i2c_bus { > #endif > }; > > -#if defined(CONFIG_MX6QDL) > +#if defined(CONFIG_SOC_IMX6QDL) > #define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \ > struct i2c_pads_info mx6q_##name = { \ > .scl = { \ > diff --git a/arch/arm/include/asm/mach-imx/regs-apbh.h b/arch/arm/include/asm/mach-imx/regs-apbh.h > index 4cc4abaf85..9283f0cc26 100644 > --- a/arch/arm/include/asm/mach-imx/regs-apbh.h > +++ b/arch/arm/include/asm/mach-imx/regs-apbh.h > @@ -96,7 +96,7 @@ struct mxs_apbh_regs { > mxs_reg_32(hw_apbh_version) > }; > > -#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7)) > +#elif (defined(CONFIG_MX28) || defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > struct mxs_apbh_regs { > mxs_reg_32(hw_apbh_ctrl0) > mxs_reg_32(hw_apbh_ctrl1) > @@ -275,7 +275,7 @@ struct mxs_apbh_regs { > #define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800 > #define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000 > #define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000 > -#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7)) > +#elif (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > #define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0 > #define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0001 > #define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0002 > @@ -391,7 +391,7 @@ struct mxs_apbh_regs { > #define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000 > #endif > > -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) > +#if (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > #define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16 > #endif > > diff --git a/arch/arm/include/asm/mach-imx/regs-bch.h b/arch/arm/include/asm/mach-imx/regs-bch.h > index c0f673cc33..9a0aaf8878 100644 > --- a/arch/arm/include/asm/mach-imx/regs-bch.h > +++ b/arch/arm/include/asm/mach-imx/regs-bch.h > @@ -123,7 +123,7 @@ struct mxs_bch_regs { > #define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24 > #define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16) > #define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16 > -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) > +#if (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > #define BCH_FLASHLAYOUT0_ECC0_MASK (0x1f << 11) > #define BCH_FLASHLAYOUT0_ECC0_OFFSET 11 > #else > @@ -154,7 +154,7 @@ struct mxs_bch_regs { > > #define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16) > #define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16 > -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) > +#if (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > #define BCH_FLASHLAYOUT1_ECCN_MASK (0x1f << 11) > #define BCH_FLASHLAYOUT1_ECCN_OFFSET 11 > #else > diff --git a/arch/arm/include/asm/mach-imx/regs-lcdif.h b/arch/arm/include/asm/mach-imx/regs-lcdif.h > index 38a2c6d4ee..e671e1f356 100644 > --- a/arch/arm/include/asm/mach-imx/regs-lcdif.h > +++ b/arch/arm/include/asm/mach-imx/regs-lcdif.h > @@ -19,9 +19,9 @@ > struct mxs_lcdif_regs { > mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */ > mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */ > -#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \ > - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ > - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ > +#if defined(CONFIG_MX28) || defined(CONFIG_SOC_IMX6SX) || \ > + defined(CONFIG_SOC_IMX6SL) || defined(CONFIG_SOC_IMX6SLL) || \ > + defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) || \ > defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ > defined(CONFIG_MX8M) > mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */ > @@ -58,9 +58,9 @@ struct mxs_lcdif_regs { > #endif > mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */ > mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */ > -#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \ > - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ > - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ > +#if defined(CONFIG_MX28) || defined(CONFIG_SOC_IMX6SX) || \ > + defined(CONFIG_SOC_IMX6SL) || defined(CONFIG_SOC_IMX6SLL) || \ > + defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) || \ > defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ > defined(CONFIG_MX8M) > mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ > @@ -70,11 +70,10 @@ struct mxs_lcdif_regs { > mxs_reg_32(hw_lcdif_debug0) /* 0x1f0/0x1d0 */ > mxs_reg_32(hw_lcdif_debug1) /* 0x200/0x1e0 */ > mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */ > -#if defined(CONFIG_MX6SX) || \ > - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ > - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ > - defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ > - defined(CONFIG_MX8M) > +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6SL) || \ > + defined(CONFIG_SOC_IMX6SLL) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_MX7) || \ > + defined(CONFIG_MX7ULP) || defined(CONFIG_MX8M) > mxs_reg_32(hw_lcdif_thres) > mxs_reg_32(hw_lcdif_as_ctrl) > mxs_reg_32(hw_lcdif_as_buf) > diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h > index 96795e1814..361e383f5b 100644 > --- a/arch/arm/include/asm/mach-imx/sys_proto.h > +++ b/arch/arm/include/asm/mach-imx/sys_proto.h > @@ -42,7 +42,7 @@ > > #define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP)) > > -#ifdef CONFIG_MX6 > +#ifdef CONFIG_SOC_IMX6 > #define IMX6_SRC_GPR10_BMODE BIT(28) > > #define IMX6_BMODE_MASK GENMASK(7, 0) > @@ -70,7 +70,7 @@ enum imx6_bmode_emi { > > enum imx6_bmode { > IMX6_BMODE_EMI, > -#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#if defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) > IMX6_BMODE_QSPI, > IMX6_BMODE_RESERVED, > #else > @@ -94,7 +94,7 @@ static inline u8 imx6_is_bmode_from_gpr9(void) > u32 imx6_src_get_boot_mode(void); > void gpr_init(void); > > -#endif /* CONFIG_MX6 */ > +#endif /* CONFIG_SOC_IMX6 */ > > u32 get_nr_cpus(void); > u32 get_cpu_rev(void); > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 3aec89d440..ff4f692ae7 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -15,7 +15,7 @@ config GPT_TIMER > > config IMX_RDC > bool "i.MX Resource domain controller driver" > - depends on ARCH_MX6 || ARCH_MX7 > + depends on ARCH_IMX6 || ARCH_MX7 > help > i.MX Resource domain controller is used to assign masters > and peripherals to differet domains. This can be used to > @@ -23,20 +23,20 @@ config IMX_RDC > > config IMX_BOOTAUX > bool "Support boot auxiliary core" > - depends on ARCH_MX7 || ARCH_MX6 > + depends on ARCH_MX7 || ARCH_IMX6 > help > bootaux [addr] to boot auxiliary core. > > config USE_IMXIMG_PLUGIN > bool "Use imximage plugin code" > - depends on ARCH_MX7 || ARCH_MX6 > + depends on ARCH_MX7 || ARCH_IMX6 > help > i.MX6/7 supports DCD and Plugin. Enable this configuration > to use Plugin, otherwise DCD will be used. > > config SECURE_BOOT > bool "Support i.MX HAB features" > - depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5 > + depends on ARCH_MX7 || ARCH_IMX6 || ARCH_MX5 > select FSL_CAAM if HAS_CAAM > imply CMD_DEKBLOB > help > @@ -46,7 +46,7 @@ config SECURE_BOOT > config CMD_BMODE > bool "Support the 'bmode' command" > default y > - depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5 > + depends on ARCH_MX7 || ARCH_IMX6 || ARCH_MX5 > help > This enables the 'bmode' (bootmode) command for forcing > a boot from specific media. > @@ -73,7 +73,7 @@ config CMD_HDMIDETECT > > config NXP_BOARD_REVISION > bool "Read NXP board revision from fuses" > - depends on ARCH_MX6 || ARCH_MX7 > + depends on ARCH_IMX6 || ARCH_MX7 > help > NXP boards based on i.MX6/7 contain the board revision information > stored in the fuses. Select this option if you want to be able to > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 95a542fa01..494534fa25 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -138,7 +138,7 @@ targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-sp > obj-$(CONFIG_ARM64) += sip.o > > obj-$(CONFIG_MX5) += mx5/ > -obj-$(CONFIG_MX6) += mx6/ > +obj-$(CONFIG_SOC_IMX6) += mx6/ > obj-$(CONFIG_MX7) += mx7/ > obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/ > obj-$(CONFIG_MX8M) += mx8m/ > diff --git a/arch/arm/mach-imx/cache.c b/arch/arm/mach-imx/cache.c > index c5279a7c8a..c74421b0d8 100644 > --- a/arch/arm/mach-imx/cache.c > +++ b/arch/arm/mach-imx/cache.c > @@ -84,7 +84,7 @@ void v7_outer_cache_enable(void) > * double linefill feature. This is the default behavior. > */ > > -#ifndef CONFIG_MX6Q > +#ifndef CONFIG_SOC_IMX6Q > val |= 0x40800000; > #endif > writel(val, &pl310->pl310_prefetch_ctrl); > diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c > index 4d4d434906..2ab3db019b 100644 > --- a/arch/arm/mach-imx/cpu.c > +++ b/arch/arm/mach-imx/cpu.c > @@ -85,7 +85,7 @@ u32 get_imx_reset_cause(void) > } > #endif > > -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) > +#if defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) > #if defined(CONFIG_MX53) > #define MEMCTL_BASE ESDCTL_BASE_ADDR > #else > @@ -130,7 +130,7 @@ unsigned imx_ddr_size(void) > bits += ESD_MMDC_CTL_GET_WIDTH(ctl); > bits += ESD_MMDC_CTL_GET_CS1(ctl); > > - /* The MX6 can do only 3840 MiB of DRAM */ > + /* The i.MX6 can do only 3840 MiB of DRAM */ > if (bits == 32) > return 0xf0000000; > > @@ -288,7 +288,7 @@ void arch_preboot_os(void) > #endif > #if defined(CONFIG_SATA) > sata_remove(0); > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > disable_sata_clock(); > #endif > #endif > diff --git a/arch/arm/mach-imx/init.c b/arch/arm/mach-imx/init.c > index 0aa8295751..9e3aaed3ee 100644 > --- a/arch/arm/mach-imx/init.c > +++ b/arch/arm/mach-imx/init.c > @@ -116,7 +116,7 @@ void boot_mode_apply(unsigned cfg_val) > } > #endif > > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > u32 imx6_src_get_boot_mode(void) > { > if (imx6_is_bmode_from_gpr9()) > diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c > index 94d660015d..2bfeb1fe7e 100644 > --- a/arch/arm/mach-imx/iomux-v3.c > +++ b/arch/arm/mach-imx/iomux-v3.c > @@ -31,7 +31,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) > (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT; > u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; > > -#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) > +#if defined(CONFIG_SOC_IMX6SL) || defined(CONFIG_SOC_IMX6SLL) > /* Check whether LVE bit needs to be set */ > if (pad_ctrl & PAD_CTL_LVE) { > pad_ctrl &= ~PAD_CTL_LVE; > @@ -73,7 +73,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) > #else > if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) > __raw_writel(pad_ctrl, base + pad_ctrl_ofs); > -#if defined(CONFIG_MX6SLL) > +#if defined(CONFIG_SOC_IMX6SLL) > else if ((pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) > clrbits_le32(base + pad_ctrl_ofs, PAD_CTL_IPD_BIT); > #endif > @@ -94,7 +94,7 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, > int stride; > int i; > > -#if defined(CONFIG_MX6QDL) > +#if defined(CONFIG_SOC_IMX6QDL) > stride = 2; > if (!is_mx6dq() && !is_mx6dqp()) > p += 1; > diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig > index d4ce38db8d..f78ac2eaec 100644 > --- a/arch/arm/mach-imx/mx6/Kconfig > +++ b/arch/arm/mach-imx/mx6/Kconfig > @@ -1,4 +1,4 @@ > -if ARCH_MX6 > +if ARCH_IMX6 > > config MX6_SMP > select ARM_ERRATA_751472 > @@ -7,66 +7,66 @@ config MX6_SMP > select ARM_ERRATA_845369 > bool > > -config MX6 > - select ARM_ERRATA_743622 if !MX6UL && !MX6ULL > - select GPT_TIMER if !MX6UL && !MX6ULL > +config SOC_IMX6 > + select ARM_ERRATA_743622 if !SOC_IMX6UL && !SOC_IMX6ULL > + select GPT_TIMER if !SOC_IMX6UL && !SOC_IMX6ULL > bool > default y > imply CMD_FUSE > > -config MX6D > +config SOC_IMX6D > select HAS_CAAM > select MX6_SMP > bool > > -config MX6DL > +config SOC_IMX6DL > select HAS_CAAM > select MX6_SMP > bool > > -config MX6Q > +config SOC_IMX6Q > select HAS_CAAM > select MX6_SMP > bool > > -config MX6QDL > +config SOC_IMX6QDL > select HAS_CAAM > select MX6_SMP > bool > > -config MX6S > +config SOC_IMX6S > select HAS_CAAM > bool > > -config MX6SL > +config SOC_IMX6SL > bool > > -config MX6SX > +config SOC_IMX6SX > select HAS_CAAM > select ROM_UNIFIED_SECTIONS > bool > > -config MX6SLL > +config SOC_IMX6SLL > select ROM_UNIFIED_SECTIONS > bool > > -config MX6UL > +config SOC_IMX6UL > select HAS_CAAM > select SYS_L2CACHE_OFF > select ROM_UNIFIED_SECTIONS > select SYSCOUNTER_TIMER > bool > > -config MX6UL_LITESOM > +config SOC_IMX6UL_LITESOM > bool > - select MX6UL > + select SOC_IMX6UL > select DM > select DM_THERMAL > select SUPPORT_SPL > > -config MX6UL_OPOS6UL > +config SOC_IMX6UL_OPOS6UL > bool > - select MX6UL > + select SOC_IMX6UL > select BOARD_LATE_INIT > select DM > select DM_GPIO > @@ -74,7 +74,7 @@ config MX6UL_OPOS6UL > select DM_THERMAL > select SUPPORT_SPL > > -config MX6ULL > +config SOC_IMX6ULL > select SYS_L2CACHE_OFF > select ROM_UNIFIED_SECTIONS > select SYSCOUNTER_TIMER > @@ -89,13 +89,13 @@ config MX6_DDRCAL > If unsure, say N. > > choice > - prompt "MX6 board select" > + prompt "i.MX6 board select" > optional > > config TARGET_ADVANTECH_DMS_BA16 > bool "Advantech dms-ba16" > select BOARD_LATE_INIT > - select MX6Q > + select SOC_IMX6Q > imply CMD_SATA > > config TARGET_APALIS_IMX6 > @@ -120,7 +120,7 @@ config TARGET_ARISTAINETOS2B > > config TARGET_CGTQMX6EVAL > bool "cgtqmx6eval" > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select SUPPORT_SPL > select DM > @@ -129,7 +129,7 @@ config TARGET_CGTQMX6EVAL > config TARGET_CM_FX6 > bool "CM-FX6" > select SUPPORT_SPL > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select DM > select DM_SERIAL > @@ -145,7 +145,7 @@ config TARGET_COLIBRI_IMX6 > > config TARGET_DHCOMIMX6 > bool "dh_imx6" > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select BOARD_EARLY_INIT_F > select SUPPORT_SPL > @@ -166,21 +166,21 @@ config TARGET_EMBESTMX6BOARDS > config TARGET_GE_B450V3 > bool "General Electric B450v3" > select BOARD_LATE_INIT > - select MX6Q > + select SOC_IMX6Q > > config TARGET_GE_B650V3 > bool "General Electric B650v3" > select BOARD_LATE_INIT > - select MX6Q > + select SOC_IMX6Q > > config TARGET_GE_B850V3 > bool "General Electric B850v3" > select BOARD_LATE_INIT > - select MX6Q > + select SOC_IMX6Q > > config TARGET_GW_VENTANA > bool "gw_ventana" > - select MX6QDL > + select SOC_IMX6QDL > select SUPPORT_SPL > imply CMD_SATA > imply CMD_SPL > @@ -192,12 +192,12 @@ config TARGET_KOSAGI_NOVENA > > config TARGET_MCCMON6 > bool "mccmon6" > - select MX6QDL > + select SOC_IMX6QDL > select SUPPORT_SPL > > config TARGET_MX6CUBOXI > bool "Solid-run mx6 boards" > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select SUPPORT_SPL > > @@ -228,7 +228,7 @@ config TARGET_MX6QARM2 > config TARGET_MX6Q_ENGICAM > bool "Support Engicam i.Core(RQS)" > select BOARD_LATE_INIT > - select MX6QDL > + select SOC_IMX6QDL > select OF_CONTROL > select SPL_OF_LIBFDT > select DM > @@ -245,7 +245,7 @@ config TARGET_MX6Q_ENGICAM > > config TARGET_MX6SABREAUTO > bool "mx6sabreauto" > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select SUPPORT_SPL > select DM > @@ -254,7 +254,7 @@ config TARGET_MX6SABREAUTO > > config TARGET_MX6SABRESD > bool "mx6sabresd" > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select SUPPORT_SPL > select DM > @@ -263,20 +263,20 @@ config TARGET_MX6SABRESD > > config TARGET_MX6SLEVK > bool "mx6slevk" > - select MX6SL > + select SOC_IMX6SL > select SUPPORT_SPL > > config TARGET_MX6SLLEVK > bool "mx6sll evk" > select BOARD_LATE_INIT > - select MX6SLL > + select SOC_IMX6SLL > select DM > select DM_THERMAL > > config TARGET_MX6SXSABRESD > bool "mx6sxsabresd" > select BOARD_LATE_INIT > - select MX6SX > + select SOC_IMX6SX > select SUPPORT_SPL > select DM > select DM_THERMAL > @@ -285,7 +285,7 @@ config TARGET_MX6SXSABRESD > config TARGET_MX6SXSABREAUTO > bool "mx6sxsabreauto" > select BOARD_LATE_INIT > - select MX6SX > + select SOC_IMX6SX > select DM > select DM_THERMAL > select BOARD_EARLY_INIT_F > @@ -293,7 +293,7 @@ config TARGET_MX6SXSABREAUTO > config TARGET_MX6UL_9X9_EVK > bool "mx6ul_9x9_evk" > select BOARD_LATE_INIT > - select MX6UL > + select SOC_IMX6UL > select DM > select DM_THERMAL > select SUPPORT_SPL > @@ -301,7 +301,7 @@ config TARGET_MX6UL_9X9_EVK > config TARGET_MX6UL_14X14_EVK > select BOARD_LATE_INIT > bool "mx6ul_14x14_evk" > - select MX6UL > + select SOC_IMX6UL > select DM > select DM_THERMAL > select SUPPORT_SPL > @@ -309,7 +309,7 @@ config TARGET_MX6UL_14X14_EVK > config TARGET_MX6UL_ENGICAM > bool "Support Engicam GEAM6UL/Is.IoT" > select BOARD_LATE_INIT > - select MX6UL > + select SOC_IMX6UL > select OF_CONTROL > select DM > select DM_ETH > @@ -326,7 +326,7 @@ config TARGET_MX6UL_ENGICAM > config TARGET_MX6ULL_14X14_EVK > bool "Support mx6ull_14x14_evk" > select BOARD_LATE_INIT > - select MX6ULL > + select SOC_IMX6ULL > select DM > select DM_THERMAL > > @@ -339,7 +339,7 @@ config TARGET_NITROGEN6X > > config TARGET_OPOS6ULDEV > bool "Armadeus OPOS6ULDev board" > - select MX6UL_OPOS6UL > + select SOC_IMX6UL_OPOS6UL > > config TARGET_OT1200 > bool "Bachmann OT1200" > @@ -348,12 +348,12 @@ config TARGET_OT1200 > > config TARGET_PICO_IMX6UL > bool "PICO-IMX6UL-EMMC" > - select MX6UL > + select SOC_IMX6UL > > config TARGET_LITEBOARD > bool "Grinn liteBoard (i.MX6UL)" > select BOARD_LATE_INIT > - select MX6UL_LITESOM > + select SOC_IMX6UL_LITESOM > > config TARGET_PLATINUM_PICON > bool "platinum-picon" > @@ -370,7 +370,7 @@ config TARGET_PCM058 > > config TARGET_PFLA02 > bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad" > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select SUPPORT_SPL > > @@ -393,7 +393,7 @@ config TARGET_TQMA6 > > config TARGET_UDOO > bool "udoo" > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select SUPPORT_SPL > > @@ -401,32 +401,32 @@ config TARGET_UDOO_NEO > bool "UDOO Neo" > select BOARD_LATE_INIT > select SUPPORT_SPL > - select MX6SX > + select SOC_IMX6SX > select DM > select DM_THERMAL > > config TARGET_SAMTEC_VINING_2000 > bool "samtec VIN|ING 2000" > select BOARD_LATE_INIT > - select MX6SX > + select SOC_IMX6SX > select DM > select DM_THERMAL > > config TARGET_WANDBOARD > bool "wandboard" > - select MX6QDL > + select SOC_IMX6QDL > select BOARD_LATE_INIT > select SUPPORT_SPL > > config TARGET_WARP > bool "WaRP" > - select MX6SL > + select SOC_IMX6SL > select BOARD_LATE_INIT > > config TARGET_XPRESS > bool "CCV xPress" > select BOARD_LATE_INIT > - select MX6UL > + select SOC_IMX6UL > select DM > select DM_THERMAL > select SUPPORT_SPL > diff --git a/arch/arm/mach-imx/mx6/Makefile b/arch/arm/mach-imx/mx6/Makefile > index c183eb4a2f..37a5d5d422 100644 > --- a/arch/arm/mach-imx/mx6/Makefile > +++ b/arch/arm/mach-imx/mx6/Makefile > @@ -10,5 +10,5 @@ > obj-y := soc.o clock.o > obj-$(CONFIG_SPL_BUILD) += ddr.o > obj-$(CONFIG_MP) += mp.o > -obj-$(CONFIG_MX6UL_LITESOM) += litesom.o > -obj-$(CONFIG_MX6UL_OPOS6UL) += opos6ul.o > +obj-$(CONFIG_SOC_IMX6UL_LITESOM) += litesom.o > +obj-$(CONFIG_SOC_IMX6UL_OPOS6UL) += opos6ul.o > diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c > index 71a9e6bca0..1a14d95822 100644 > --- a/arch/arm/mach-imx/mx6/clock.c > +++ b/arch/arm/mach-imx/mx6/clock.c > @@ -41,7 +41,7 @@ void enable_ocotp_clk(unsigned char enable) > #ifdef CONFIG_NAND_MXS > void setup_gpmi_io_clk(u32 cfg) > { > - /* Disable clocks per ERR007177 from MX6 errata */ > + /* Disable clocks per ERR007177 from i.MX6 errata */ > clrbits_le32(&imx_ccm->CCGR4, > MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | > MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | > @@ -49,7 +49,7 @@ void setup_gpmi_io_clk(u32 cfg) > MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | > MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK); > > -#if defined(CONFIG_MX6SX) > +#if defined(CONFIG_SOC_IMX6SX) > clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK); > > clrsetbits_le32(&imx_ccm->cs2cdr, > @@ -92,7 +92,7 @@ void enable_usboh3_clk(unsigned char enable) > > } > > -#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX) > +#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_SOC_IMX6SX) > void enable_enet_clk(unsigned char enable) > { > u32 mask, *addr; > @@ -949,7 +949,7 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq) > reg &= ~BM_ANADIG_PLL_ENET_BYPASS; > writel(reg, &anatop->pll_enet); > > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > /* Disable enet system clcok before switching clock parent */ > reg = readl(&imx_ccm->CCGR3); > reg &= ~MXC_CCM_CCGR3_ENET_MASK; > @@ -1312,7 +1312,7 @@ int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > return 0; > } > > -#ifndef CONFIG_MX6SX > +#ifndef CONFIG_SOC_IMX6SX > void enable_ipu_clock(void) > { > struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; > @@ -1328,8 +1328,8 @@ void enable_ipu_clock(void) > } > #endif > > -#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \ > - defined(CONFIG_MX6S) > +#if defined(CONFIG_SOC_IMX6Q) || defined(CONFIG_SOC_IMX6D) || \ > + defined(CONFIG_SOC_IMX6DL) || defined(CONFIG_SOC_IMX6S) > static void disable_ldb_di_clock_sources(void) > { > struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; > diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c > index 43b77cfa41..f8f50b2bf9 100644 > --- a/arch/arm/mach-imx/mx6/ddr.c > +++ b/arch/arm/mach-imx/mx6/ddr.c > @@ -572,8 +572,8 @@ int mmdc_do_dqs_calibration(struct mx6_ddr_sysinfo const *sysinfo) > } > #endif > > -#if defined(CONFIG_MX6SX) > -/* Configure MX6SX mmdc iomux */ > +#if defined(CONFIG_SOC_IMX6SX) > +/* Configure i.MX6SX mmdc iomux */ > void mx6sx_dram_iocfg(unsigned width, > const struct mx6sx_iomux_ddr_regs *ddr, > const struct mx6sx_iomux_grp_regs *grp) > @@ -631,7 +631,7 @@ void mx6sx_dram_iocfg(unsigned width, > } > #endif > > -#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#if defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) > void mx6ul_dram_iocfg(unsigned width, > const struct mx6ul_iomux_ddr_regs *ddr, > const struct mx6ul_iomux_grp_regs *grp) > @@ -675,7 +675,7 @@ void mx6ul_dram_iocfg(unsigned width, > } > #endif > > -#if defined(CONFIG_MX6SL) > +#if defined(CONFIG_SOC_IMX6SL) > void mx6sl_dram_iocfg(unsigned width, > const struct mx6sl_iomux_ddr_regs *ddr, > const struct mx6sl_iomux_grp_regs *grp) > @@ -730,7 +730,8 @@ void mx6sl_dram_iocfg(unsigned width, > } > #endif > > -#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) > +#if defined(CONFIG_SOC_IMX6QDL) || defined(CONFIG_SOC_IMX6Q) || \ > + defined(CONFIG_SOC_IMX6D) > /* Configure MX6DQ mmdc iomux */ > void mx6dq_dram_iocfg(unsigned width, > const struct mx6dq_iomux_ddr_regs *ddr, > @@ -808,7 +809,8 @@ void mx6dq_dram_iocfg(unsigned width, > } > #endif > > -#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) > +#if defined(CONFIG_SOC_IMX6QDL) || defined(CONFIG_SOC_IMX6DL) || \ > + defined(CONFIG_SOC_IMX6S) > /* Configure MX6SDL mmdc iomux */ > void mx6sdl_dram_iocfg(unsigned width, > const struct mx6sdl_iomux_ddr_regs *ddr, > @@ -1218,14 +1220,14 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, > if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl()) > mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR; > > - /* Limit mem_speed for MX6D/MX6Q */ > + /* Limit mem_speed for i.MX6D/i.MX6Q */ > if (is_mx6dq() || is_mx6dqp()) { > if (mem_speed > 1066) > mem_speed = 1066; /* 1066 MT/s */ > > tcwl = 4; > } > - /* Limit mem_speed for MX6S/MX6DL */ > + /* Limit mem_speed for i.MX6S/i.MX6DL */ > else { > if (mem_speed > 800) > mem_speed = 800; /* 800 MT/s */ > @@ -1235,7 +1237,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, > > clock = mem_speed / 2; > /* > - * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports > + * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but i.MX6D/Q supports > * up to 528 MHz, so reduce the clock to fit chip specs > */ > if (is_mx6dq() || is_mx6dqp()) { > diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c > index 9b3d8f69b2..1b9f26270f 100644 > --- a/arch/arm/mach-imx/mx6/soc.c > +++ b/arch/arm/mach-imx/mx6/soc.c > @@ -528,7 +528,7 @@ int board_postclk_init(void) > const struct boot_mode soc_boot_modes[] = { > {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, > /* reserved value should start rom usb */ > -#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#if defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) > {"usb", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, > #else > {"usb", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)}, > @@ -565,9 +565,9 @@ void s_init(void) > if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sll()) > return; > > - /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs > + /* Due to hardware limitation, on i.MX6Q we need to gate/ungate all PFDs > * to make sure PFD is working right, otherwise, PFDs may > - * not output clock after reset, MX6DL and MX6SL have added 396M pfd > + * not output clock after reset, i.MX6DL and i.MX6SL have added 396M pfd > * workaround in ROM code, as bus clock need it > */ > > diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c > index b2521b2101..c084acb1ca 100644 > --- a/arch/arm/mach-imx/spl.c > +++ b/arch/arm/mach-imx/spl.c > @@ -19,7 +19,7 @@ > > DECLARE_GLOBAL_DATA_PTR; > > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > /* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */ > u32 spl_boot_device(void) > { > @@ -61,7 +61,7 @@ u32 spl_boot_device(void) > case IMX6_BMODE_RESERVED: > return BOOT_DEVICE_BOARD; > /* SATA: See 8.5.4, Table 8-20 */ > -#if !defined(CONFIG_MX6UL) && !defined(CONFIG_MX6ULL) > +#if !defined(CONFIG_SOC_IMX6UL) && !defined(CONFIG_SOC_IMX6ULL) > case IMX6_BMODE_SATA: > return BOOT_DEVICE_SATA; > #endif > @@ -121,7 +121,7 @@ u32 spl_boot_device(void) > return BOOT_DEVICE_NONE; > } > } > -#endif /* CONFIG_MX6 || CONFIG_MX7 || CONFIG_MX8M */ > +#endif /* CONFIG_SOC_IMX6 || CONFIG_MX7 || CONFIG_MX8M */ > > #ifdef CONFIG_SPL_USB_GADGET_SUPPORT > int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) > @@ -213,7 +213,7 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) > > #endif > > -#if defined(CONFIG_MX6) && defined(CONFIG_SPL_OS_BOOT) > +#if defined(CONFIG_SOC_IMX6) && defined(CONFIG_SPL_OS_BOOT) > int dram_init_banksize(void) > { > gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; > diff --git a/arch/arm/mach-imx/timer.c b/arch/arm/mach-imx/timer.c > index 69dbf3c2ce..ced5c9e961 100644 > --- a/arch/arm/mach-imx/timer.c > +++ b/arch/arm/mach-imx/timer.c > @@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR; > > static inline int gpt_has_clk_source_osc(void) > { > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) || > is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() || > is_mx6ull() || is_mx6sll()) > diff --git a/board/bachmann/ot1200/ot1200_spl.c b/board/bachmann/ot1200/ot1200_spl.c > index f3dff95710..62c5e3fa5d 100644 > --- a/board/bachmann/ot1200/ot1200_spl.c > +++ b/board/bachmann/ot1200/ot1200_spl.c > @@ -10,7 +10,7 @@ > > DECLARE_GLOBAL_DATA_PTR; > > -/* Configure MX6Q/DUAL mmdc DDR io registers */ > +/* Configure i.MX6Q/DUAL mmdc DDR io registers */ > static struct mx6dq_iomux_ddr_regs ot1200_ddr_ioregs = { > /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 48ohm */ > .dram_sdclk_0 = 0x00000028, > @@ -46,7 +46,7 @@ static struct mx6dq_iomux_ddr_regs ot1200_ddr_ioregs = { > .dram_dqm7 = 0x00000028, > }; > > -/* Configure MX6Q/DUAL mmdc GRP io registers */ > +/* Configure i.MX6Q/DUAL mmdc GRP io registers */ > static struct mx6dq_iomux_grp_regs ot1200_grp_ioregs = { > /* DDR3 */ > .grp_ddr_type = 0x000c0000, > diff --git a/board/barco/platinum/spl_picon.c b/board/barco/platinum/spl_picon.c > index f49adf0329..182e5db708 100644 > --- a/board/barco/platinum/spl_picon.c > +++ b/board/barco/platinum/spl_picon.c > @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR; > > #undef RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */ > > -/* Configure MX6Q/DUAL mmdc DDR io registers */ > +/* Configure i.MX6Q/DUAL mmdc DDR io registers */ > struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { > /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ > .dram_sdclk_0 = 0x00020030, > @@ -61,7 +61,7 @@ struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { > .dram_dqm7 = 0x00020030, > }; > > -/* Configure MX6Q/DUAL mmdc GRP io registers */ > +/* Configure i.MX6Q/DUAL mmdc GRP io registers */ > struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { > /* DDR3 */ > .grp_ddr_type = 0x000c0000, > diff --git a/board/barco/platinum/spl_titanium.c b/board/barco/platinum/spl_titanium.c > index c27fb4836a..77117abd7a 100644 > --- a/board/barco/platinum/spl_titanium.c > +++ b/board/barco/platinum/spl_titanium.c > @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR; > > #undef RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */ > > -/* Configure MX6Q/DUAL mmdc DDR io registers */ > +/* Configure i.MX6Q/DUAL mmdc DDR io registers */ > struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ > .dram_sdclk_0 = 0x00020030, > @@ -61,7 +61,7 @@ struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_dqm7 = 0x00020030, > }; > > -/* Configure MX6Q/DUAL mmdc GRP io registers */ > +/* Configure i.MX6Q/DUAL mmdc GRP io registers */ > struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { > /* DDR3 */ > .grp_ddr_type = 0x000c0000, > diff --git a/board/boundary/nitrogen6x/ddr-setup.cfg b/board/boundary/nitrogen6x/ddr-setup.cfg > index 2748d40084..a018bbacb4 100644 > --- a/board/boundary/nitrogen6x/ddr-setup.cfg > +++ b/board/boundary/nitrogen6x/ddr-setup.cfg > @@ -16,10 +16,10 @@ > > /* > * DDR3 settings > - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), > - * memory bus width: 64 bits x16/x32/x64 > - * MX6DL ddr is limited to 800 MHz(400 MHz clock) > - * memory bus width: 64 bits x16/x32/x64 > + * SOC_IMX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), > + * memory bus width: 64 bits x16/x32/x64 > + * SOC_IMX6DL ddr is limited to 800 MHz(400 MHz clock) > + * memory bus width: 64 bits x16/x32/x64 > * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) > * memory bus width: 32 bits x16/x32 > */ > diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c > index 673de03071..9dc6bd4785 100644 > --- a/board/compulab/cm_fx6/cm_fx6.c > +++ b/board/compulab/cm_fx6/cm_fx6.c > @@ -607,7 +607,7 @@ int board_init(void) > > cm_fx6_setup_display(); > > - /* This should be done in the MMC driver when MX6 has a clock driver */ > + /* This should be done in the MMC driver when i.MX6 has a clock driver */ > #ifdef CONFIG_FSL_ESDHC > if (IS_ENABLED(CONFIG_BLK)) { > int i; > @@ -628,9 +628,9 @@ int board_late_init(void) > int err; > > if (is_mx6dq()) > - env_set("board_rev", "MX6Q"); > + env_set("board_rev", "i.MX6Q"); > else if (is_mx6dl()) > - env_set("board_rev", "MX6DL"); > + env_set("board_rev", "i.MX6DL"); > > err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0); > if (err) > diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c > index 1647b61100..47900e85c1 100644 > --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c > +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c > @@ -756,9 +756,9 @@ int board_late_init(void) > { > #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > if (is_mx6dq()) > - env_set("board_rev", "MX6Q"); > + env_set("board_rev", "i.MX6Q"); > else > - env_set("board_rev", "MX6DL"); > + env_set("board_rev", "i.MX6DL"); > #endif > > return 0; > diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c > index b00d0e4b6d..19e8ed7223 100644 > --- a/board/dhelectronics/dh_imx6/dh_imx6.c > +++ b/board/dhelectronics/dh_imx6/dh_imx6.c > @@ -245,8 +245,8 @@ int board_mmc_init(bd_t *bis) > static void setup_usb(void) > { > /* > - * Set daisy chain for otg_pin_id on MX6Q. > - * For MX6DL, this bit is reserved. > + * Set daisy chain for otg_pin_id on i.MX6Q. > + * For i.MX6DL, this bit is reserved. > */ > imx_iomux_set_gpr_register(1, 13, 1, 0); > } > diff --git a/board/engicam/common/spl.c b/board/engicam/common/spl.c > index 6e2389dd4b..1f50348c36 100644 > --- a/board/engicam/common/spl.c > +++ b/board/engicam/common/spl.c > @@ -30,10 +30,10 @@ DECLARE_GLOBAL_DATA_PTR; > PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) > > static iomux_v3_cfg_t const uart_pads[] = { > -#ifdef CONFIG_MX6QDL > +#ifdef CONFIG_SOC_IMX6QDL > IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), > IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), > -#elif CONFIG_MX6UL > +#elif CONFIG_SOC_IMX6UL > IOMUX_PADS(PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL)), > IOMUX_PADS(PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL)), > #endif > @@ -92,7 +92,7 @@ int spl_start_uboot(void) > } > #endif > > -#ifdef CONFIG_MX6QDL > +#ifdef CONFIG_SOC_IMX6QDL > /* > * Driving strength: > * 0x30 == 40 Ohm > @@ -101,7 +101,7 @@ int spl_start_uboot(void) > #define IMX6DQ_DRIVE_STRENGTH 0x30 > #define IMX6SDL_DRIVE_STRENGTH 0x28 > > -/* configure MX6Q/DUAL mmdc DDR io registers */ > +/* configure i.MX6Q/DUAL mmdc DDR io registers */ > static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH, > .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH, > @@ -131,7 +131,7 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH, > }; > > -/* configure MX6Q/DUAL mmdc GRP io registers */ > +/* configure i.MX6Q/DUAL mmdc GRP io registers */ > static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { > .grp_b0ds = IMX6DQ_DRIVE_STRENGTH, > .grp_b1ds = IMX6DQ_DRIVE_STRENGTH, > @@ -293,9 +293,9 @@ static struct mx6_ddr_sysinfo mem_s = { > .rst_to_cke = 0x23, > .sde_to_rst = 0x10, > }; > -#endif /* CONFIG_MX6QDL */ > +#endif /* CONFIG_SOC_IMX6QDL */ > > -#ifdef CONFIG_MX6UL > +#ifdef CONFIG_SOC_IMX6UL > static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { > .grp_addds = 0x00000030, > .grp_ddrmode_ctl = 0x00020000, > @@ -360,13 +360,13 @@ static struct mx6_ddr3_cfg mem_ddr = { > .trcmin = 4875, > .trasmin = 3500, > }; > -#endif /* CONFIG_MX6UL */ > +#endif /* CONFIG_SOC_IMX6UL */ > > static void ccgr_init(void) > { > struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; > > -#ifdef CONFIG_MX6QDL > +#ifdef CONFIG_SOC_IMX6QDL > writel(0x00003F3F, &ccm->CCGR0); > writel(0x0030FC00, &ccm->CCGR1); > writel(0x000FC000, &ccm->CCGR2); > @@ -374,7 +374,7 @@ static void ccgr_init(void) > writel(0xFF00F300, &ccm->CCGR4); > writel(0x0F0000C3, &ccm->CCGR5); > writel(0x000003CC, &ccm->CCGR6); > -#elif CONFIG_MX6UL > +#elif CONFIG_SOC_IMX6UL > writel(0x00c03f3f, &ccm->CCGR0); > writel(0xfcffff00, &ccm->CCGR1); > writel(0x0cffffcc, &ccm->CCGR2); > @@ -387,7 +387,7 @@ static void ccgr_init(void) > > static void spl_dram_init(void) > { > -#ifdef CONFIG_MX6QDL > +#ifdef CONFIG_SOC_IMX6QDL > if (is_mx6solo()) { > mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs); > mx6_dram_cfg(&mem_s, &mx6dl_mmdc_calib, &mt41j256); > @@ -398,7 +398,7 @@ static void spl_dram_init(void) > mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs); > mx6_dram_cfg(&mem_q, &mx6dq_mmdc_calib, &mt41j256); > } > -#elif CONFIG_MX6UL > +#elif CONFIG_SOC_IMX6UL > mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); > mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr); > #endif > diff --git a/board/freescale/mx6memcal/spl.c b/board/freescale/mx6memcal/spl.c > index b4b50db772..b08def69aa 100644 > --- a/board/freescale/mx6memcal/spl.c > +++ b/board/freescale/mx6memcal/spl.c > @@ -54,7 +54,7 @@ static iomux_v3_cfg_t const uart_pads[] = { > #define DRAM_DRIVE_STRENGTH \ > (CONFIG_DRAM_DRIVE_STRENGTH << 3) > > -/* configure MX6Q/DUAL mmdc DDR io registers */ > +/* configure i.MX6Q/DUAL mmdc DDR io registers */ > static struct mx6dq_iomux_ddr_regs const mx6dq_ddr_ioregs = { > /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ > .dram_sdclk_0 = DDR_ODT + DRAM_DRIVE_STRENGTH, > @@ -91,7 +91,7 @@ static struct mx6dq_iomux_ddr_regs const mx6dq_ddr_ioregs = { > .dram_dqm7 = DDR_ODT + DRAM_DRIVE_STRENGTH, > }; > > -/* configure MX6Q/DUAL mmdc GRP io registers */ > +/* configure i.MX6Q/DUAL mmdc GRP io registers */ > static struct mx6dq_iomux_grp_regs const mx6dq_grp_ioregs = { > /* DDR3 */ > .grp_ddr_type = GRP_DDRTYPE, > @@ -426,7 +426,7 @@ void board_init_f(ulong dummy) > reset_cpu(0); > } > } > -#ifdef CONFIG_MX6SL > +#ifdef CONFIG_SOC_IMX6SL > mx6sl_dram_iocfg(CONFIG_DDRWIDTH, &mx6sl_ddr_ioregs, > &mx6sl_grp_ioregs); > #else > diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c > index 8cb5ac5940..22aaa5ebac 100644 > --- a/board/freescale/mx6qarm2/mx6qarm2.c > +++ b/board/freescale/mx6qarm2/mx6qarm2.c > @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; > > int dram_init(void) > { > -#if defined(CONFIG_MX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \ > +#if defined(CONFIG_SOC_IMX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \ > defined(CONFIG_DDR_32BIT) > gd->ram_size = ((phys_size_t)CONFIG_DDR_MB * 1024 * 1024) / 2; > #else > @@ -278,10 +278,10 @@ int board_init(void) > > int checkboard(void) > { > -#ifdef CONFIG_MX6DL > - puts("Board: MX6DL-Armadillo2\n"); > +#ifdef CONFIG_SOC_IMX6DL > + puts("Board: i.MX6DL-Armadillo2\n"); > #else > - puts("Board: MX6Q-Armadillo2\n"); > + puts("Board: i.MX6Q-Armadillo2\n"); > #endif > > return 0; > diff --git a/board/freescale/mx6sabreauto/mx6sabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c > index 52b016b91d..d168c8348a 100644 > --- a/board/freescale/mx6sabreauto/mx6sabreauto.c > +++ b/board/freescale/mx6sabreauto/mx6sabreauto.c > @@ -661,11 +661,11 @@ int board_late_init(void) > env_set("board_name", "SABREAUTO"); > > if (is_mx6dqp()) > - env_set("board_rev", "MX6QP"); > + env_set("board_rev", "i.MX6QP"); > else if (is_mx6dq()) > - env_set("board_rev", "MX6Q"); > + env_set("board_rev", "i.MX6Q"); > else if (is_mx6sdl()) > - env_set("board_rev", "MX6DL"); > + env_set("board_rev", "i.MX6DL"); > #endif > > return 0; > @@ -673,7 +673,7 @@ int board_late_init(void) > > int checkboard(void) > { > - printf("Board: MX6Q-Sabreauto rev%c\n", nxp_board_rev_string()); > + printf("Board: i.MX6Q-Sabreauto rev%c\n", nxp_board_rev_string()); > > return 0; > } > diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c > index d75dd88dbc..d98ce42497 100644 > --- a/board/freescale/mx6sabresd/mx6sabresd.c > +++ b/board/freescale/mx6sabresd/mx6sabresd.c > @@ -706,11 +706,11 @@ int board_late_init(void) > env_set("board_name", "SABRESD"); > > if (is_mx6dqp()) > - env_set("board_rev", "MX6QP"); > + env_set("board_rev", "i.MX6QP"); > else if (is_mx6dq()) > - env_set("board_rev", "MX6Q"); > + env_set("board_rev", "i.MX6Q"); > else if (is_mx6sdl()) > - env_set("board_rev", "MX6DL"); > + env_set("board_rev", "i.MX6DL"); > #endif > > return 0; > @@ -718,7 +718,7 @@ int board_late_init(void) > > int checkboard(void) > { > - puts("Board: MX6-SabreSD\n"); > + puts("Board: i.MX6-SabreSD\n"); > return 0; > } > > diff --git a/board/freescale/mx6sllevk/mx6sllevk.c b/board/freescale/mx6sllevk/mx6sllevk.c > index 33aada179f..8873413739 100644 > --- a/board/freescale/mx6sllevk/mx6sllevk.c > +++ b/board/freescale/mx6sllevk/mx6sllevk.c > @@ -115,7 +115,7 @@ int board_late_init(void) > > int checkboard(void) > { > - puts("Board: MX6SLL EVK\n"); > + puts("Board: i.MX6SLL EVK\n"); > > return 0; > } > diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c > index 83473d80b0..b60892a730 100644 > --- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c > +++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c > @@ -356,7 +356,7 @@ int board_late_init(void) > > int checkboard(void) > { > - puts("Board: MX6SX SABRE AUTO\n"); > + puts("Board: i.MX6SX SABRE AUTO\n"); > > return 0; > } > diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c > index 6c135130c9..9d82d68a43 100644 > --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c > +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c > @@ -341,7 +341,7 @@ int board_late_init(void) > > int checkboard(void) > { > - printf("Board: MX6SX SABRE SDB rev%c\n", nxp_board_rev_string()); > + printf("Board: i.MX6SX SABRE SDB rev%c\n", nxp_board_rev_string()); > > return 0; > } > diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README > index 1edccf688c..902d048dbc 100644 > --- a/board/freescale/mx6ul_14x14_evk/README > +++ b/board/freescale/mx6ul_14x14_evk/README > @@ -1,7 +1,7 @@ > -How to use U-Boot on Freescale MX6UL 14x14 EVK > ------------------------------------------------ > +How to use U-Boot on Freescale i.MX6UL 14x14 EVK > +------------------------------------------------ > > -- Build U-Boot for MX6UL 14x14 EVK: > +- Build U-Boot for i.MX6UL 14x14 EVK: > > $ make mrproper > $ make mx6ul_14x14_evk_defconfig > diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c > index a7b0fa86e0..071e60c6df 100644 > --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c > +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c > @@ -688,9 +688,9 @@ int board_late_init(void) > int checkboard(void) > { > if (is_mx6ul_9x9_evk()) > - puts("Board: MX6UL 9x9 EVK\n"); > + puts("Board: i.MX6UL 9x9 EVK\n"); > else > - puts("Board: MX6UL 14x14 EVK\n"); > + puts("Board: i.MX6UL 14x14 EVK\n"); > > return 0; > } > diff --git a/board/freescale/mx6ullevk/README b/board/freescale/mx6ullevk/README > index d5c8770863..786adbb8b5 100644 > --- a/board/freescale/mx6ullevk/README > +++ b/board/freescale/mx6ullevk/README > @@ -1,11 +1,11 @@ > -How to use U-Boot on Freescale MX6ULL 14x14 EVK > ----------------------------------------------- > +How to use U-Boot on Freescale i.MX6ULL 14x14 EVK > +------------------------------------------------- > > - First make sure you have installed the dtc package (device tree compiler): > > $ sudo apt-get install device-tree-compiler > > -- Build U-Boot for MX6ULL 14x14 EVK: > +- Build U-Boot for i.MX6ULL 14x14 EVK: > > $ make mrproper > $ make mx6ull_14x14_evk_defconfig > diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c > index cebcec738f..dc9e30bb3e 100644 > --- a/board/freescale/mx6ullevk/mx6ullevk.c > +++ b/board/freescale/mx6ullevk/mx6ullevk.c > @@ -93,7 +93,7 @@ int board_late_init(void) > > int checkboard(void) > { > - puts("Board: MX6ULL 14x14 EVK\n"); > + puts("Board: i.MX6ULL 14x14 EVK\n"); > > return 0; > } > diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c > index bdbe5e7027..724466c9f0 100644 > --- a/board/gateworks/gw_ventana/gw_ventana_spl.c > +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c > @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; > #define GSC_EEPROM_DDR_SIZE 0x2B /* enum (512,1024,2048) MB */ > #define GSC_EEPROM_DDR_WIDTH 0x2D /* enum (32,64) bit */ > > -/* configure MX6Q/DUAL mmdc DDR io registers */ > +/* configure i.MX6Q/DUAL mmdc DDR io registers */ > struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ > .dram_sdclk_0 = 0x00020030, > @@ -64,7 +64,7 @@ struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_dqm7 = 0x00020030, > }; > > -/* configure MX6Q/DUAL mmdc GRP io registers */ > +/* configure i.MX6Q/DUAL mmdc GRP io registers */ > struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { > /* DDR3 */ > .grp_ddr_type = 0x000c0000, > diff --git a/board/kosagi/novena/novena_spl.c b/board/kosagi/novena/novena_spl.c > index b4a68da88f..a99d794f69 100644 > --- a/board/kosagi/novena/novena_spl.c > +++ b/board/kosagi/novena/novena_spl.c > @@ -425,7 +425,7 @@ int board_mmc_init(bd_t *bis) > } > #endif > > -/* Configure MX6Q/DUAL mmdc DDR io registers */ > +/* Configure i.MX6Q/DUAL mmdc DDR io registers */ > static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = { > /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ > .dram_sdclk_0 = 0x00020038, > @@ -462,7 +462,7 @@ static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = { > .dram_dqm7 = 0x00000038, > }; > > -/* Configure MX6Q/DUAL mmdc GRP io registers */ > +/* Configure i.MX6Q/DUAL mmdc GRP io registers */ > static struct mx6dq_iomux_grp_regs novena_grp_ioregs = { > /* DDR3 */ > .grp_ddr_type = 0x000c0000, > diff --git a/board/liebherr/mccmon6/spl.c b/board/liebherr/mccmon6/spl.c > index 196da46df9..d975be64c5 100644 > --- a/board/liebherr/mccmon6/spl.c > +++ b/board/liebherr/mccmon6/spl.c > @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; > #define IMX6DQ_DRIVE_STRENGTH 0x30 > #define IMX6SDL_DRIVE_STRENGTH 0x28 > > -/* configure MX6Q/DUAL mmdc DDR io registers */ > +/* configure i.MX6Q/DUAL mmdc DDR io registers */ > static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, > .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, > @@ -63,7 +63,7 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, > }; > > -/* configure MX6Q/DUAL mmdc GRP io registers */ > +/* configure i.MX6Q/DUAL mmdc GRP io registers */ > static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { > .grp_ddr_type = 0x000c0000, > .grp_ddrmode_ctl = 0x00020000, > diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c > index 1f3e378ffc..5e5f1674b8 100644 > --- a/board/logicpd/imx6/imx6logic.c > +++ b/board/logicpd/imx6/imx6logic.c > @@ -177,7 +177,7 @@ int board_late_init(void) > env_set("board_name", "imx6logic"); > > if (is_mx6dq()) { > - env_set("board_rev", "MX6DQ"); > + env_set("board_rev", "i.MX6DQ"); > env_set("fdt_file", "imx6q-logicpd.dtb"); > } > > diff --git a/board/seco/Kconfig b/board/seco/Kconfig > index af1669733f..0a37f5d5bb 100644 > --- a/board/seco/Kconfig > +++ b/board/seco/Kconfig > @@ -21,15 +21,15 @@ choice > > config SECOMX6Q > bool "i.MX6Q" > - select MX6Q > + select SOC_IMX6Q > > config SECOMX6DL > bool "i.MX6DL" > - select MX6DL > + select SOC_IMX6DL > > config SECOMX6S > bool "i.MX6S" > - select MX6S > + select SOC_IMX6S > > endchoice > > diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c > index ee9e4f7c01..d2cccd3935 100644 > --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c > +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c > @@ -393,11 +393,11 @@ static bool is_hummingboard2(void) > int checkboard(void) > { > if (is_hummingboard2()) > - puts("Board: MX6 Hummingboard2\n"); > + puts("Board: i.MX6 Hummingboard2\n"); > else if (is_hummingboard()) > - puts("Board: MX6 Hummingboard\n"); > + puts("Board: i.MX6 Hummingboard\n"); > else > - puts("Board: MX6 Cubox-i\n"); > + puts("Board: i.MX6 Cubox-i\n"); > > return 0; > } > @@ -413,9 +413,9 @@ int board_late_init(void) > env_set("board_name", "CUBOXI"); > > if (is_mx6dq()) > - env_set("board_rev", "MX6Q"); > + env_set("board_rev", "i.MX6Q"); > else > - env_set("board_rev", "MX6DL"); > + env_set("board_rev", "i.MX6DL"); > #endif > > return 0; > diff --git a/board/tbs/tbs2910/Kconfig b/board/tbs/tbs2910/Kconfig > index 2e5e1d492a..09e14e1b59 100644 > --- a/board/tbs/tbs2910/Kconfig > +++ b/board/tbs/tbs2910/Kconfig > @@ -9,7 +9,7 @@ config SYS_VENDOR > config SYS_CONFIG_NAME > default "tbs2910" > > -config MX6Q > +config SOC_IMX6Q > default y > > config IMX_CONFIG > diff --git a/board/toradex/apalis_imx6/ddr-setup.cfg b/board/toradex/apalis_imx6/ddr-setup.cfg > index de7cdd6d63..301138645a 100644 > --- a/board/toradex/apalis_imx6/ddr-setup.cfg > +++ b/board/toradex/apalis_imx6/ddr-setup.cfg > @@ -17,10 +17,10 @@ > > /* > * DDR3 settings > - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), > - * memory bus width: 64 bits x16/x32/x64 > - * MX6DL ddr is limited to 800 MHz(400 MHz clock) > - * memory bus width: 64 bits x16/x32/x64 > + * SOC_IMX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), > + * memory bus width: 64 bits x16/x32/x64 > + * SOC_IMX6DL ddr is limited to 800 MHz(400 MHz clock) > + * memory bus width: 64 bits x16/x32/x64 > * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) > * memory bus width: 32 bits x16/x32 > */ > diff --git a/board/toradex/colibri_imx6/ddr-setup.cfg b/board/toradex/colibri_imx6/ddr-setup.cfg > index f46ae55ced..5ad87588bd 100644 > --- a/board/toradex/colibri_imx6/ddr-setup.cfg > +++ b/board/toradex/colibri_imx6/ddr-setup.cfg > @@ -17,10 +17,10 @@ > > /* > * DDR3 settings > - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), > - * memory bus width: 64 bits x16/x32/x64 > - * MX6DL ddr is limited to 800 MHz(400 MHz clock) > - * memory bus width: 64 bits x16/x32/x64 > + * SOC_IMX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), > + * memory bus width: 64 bits x16/x32/x64 > + * SOC_IMX6DL ddr is limited to 800 MHz(400 MHz clock) > + * memory bus width: 64 bits x16/x32/x64 > * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) > * memory bus width: 32 bits x16/x32 > */ > diff --git a/board/tqc/tqma6/Kconfig b/board/tqc/tqma6/Kconfig > index 6df4134286..f140ad6908 100644 > --- a/board/tqc/tqma6/Kconfig > +++ b/board/tqc/tqma6/Kconfig > @@ -18,19 +18,19 @@ choice > > config TQMA6Q > bool "TQMa6Q / TQMa6D" > - select MX6Q > + select SOC_IMX6Q > help > select TQMa6Q / TQMa6D with i.MX6Q/D and 1GiB DRAM > > config TQMA6DL > bool "TQMa6DL" > - select MX6DL > + select SOC_IMX6DL > help > select TQMa6DL with i.MX6DL and 1GiB DRAM > > config TQMA6S > bool "TQMa6S" > - select MX6S > + select SOC_IMX6S > help > select TQMa6S with i.MX6S and 512 MiB DRAM > > diff --git a/board/udoo/README b/board/udoo/README > index 6fbcc598f7..3d47e1348e 100644 > --- a/board/udoo/README > +++ b/board/udoo/README > @@ -1,7 +1,7 @@ > -How to use U-Boot on MX6Q/DL Udoo boards > +How to use U-Boot on i.MX6Q/DL Udoo boards > ---------------------------------------- > > -- Build U-Boot for MX6Q/DL Udoo boards: > +- Build U-Boot for i.MX6Q/DL Udoo boards: > > $ make mrproper > $ make udoo_defconfig > diff --git a/board/udoo/udoo.c b/board/udoo/udoo.c > index 562f0d863e..ad1877fa79 100644 > --- a/board/udoo/udoo.c > +++ b/board/udoo/udoo.c > @@ -254,9 +254,9 @@ int board_late_init(void) > { > #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > if (is_cpu_type(MXC_CPU_MX6Q)) > - env_set("board_rev", "MX6Q"); > + env_set("board_rev", "i.MX6Q"); > else > - env_set("board_rev", "MX6DL"); > + env_set("board_rev", "i.MX6DL"); > #endif > return 0; > } > diff --git a/board/udoo/udoo_spl.c b/board/udoo/udoo_spl.c > index 694055bd2e..daf453ff43 100644 > --- a/board/udoo/udoo_spl.c > +++ b/board/udoo/udoo_spl.c > @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; > #define IMX6DQ_DRIVE_STRENGTH 0x30 > #define IMX6SDL_DRIVE_STRENGTH 0x28 > > -/* configure MX6Q/DUAL mmdc DDR io registers */ > +/* configure i.MX6Q/DUAL mmdc DDR io registers */ > static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, > .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, > @@ -64,7 +64,7 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, > }; > > -/* configure MX6Q/DUAL mmdc GRP io registers */ > +/* configure i.MX6Q/DUAL mmdc GRP io registers */ > static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { > .grp_ddr_type = 0x000c0000, > .grp_ddrmode_ctl = 0x00020000, > diff --git a/board/wandboard/spl.c b/board/wandboard/spl.c > index 5b9622e75e..5f4f00ae03 100644 > --- a/board/wandboard/spl.c > +++ b/board/wandboard/spl.c > @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; > #define IMX6SDL_DRIVE_STRENGTH 0x28 > #define IMX6QP_DRIVE_STRENGTH 0x28 > > -/* configure MX6Q/DUAL mmdc DDR io registers */ > +/* configure i.MX6Q/DUAL mmdc DDR io registers */ > static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, > .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, > @@ -64,7 +64,7 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { > .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, > }; > > -/* configure MX6QP mmdc DDR io registers */ > +/* configure i.MX6QP mmdc DDR io registers */ > static struct mx6dq_iomux_ddr_regs mx6qp_ddr_ioregs = { > .dram_sdclk_0 = IMX6QP_DRIVE_STRENGTH, > .dram_sdclk_1 = IMX6QP_DRIVE_STRENGTH, > @@ -94,7 +94,7 @@ static struct mx6dq_iomux_ddr_regs mx6qp_ddr_ioregs = { > .dram_dqm7 = IMX6QP_DRIVE_STRENGTH, > }; > > -/* configure MX6Q/DUAL mmdc GRP io registers */ > +/* configure i.MX6Q/DUAL mmdc GRP io registers */ > static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { > .grp_ddr_type = 0x000c0000, > .grp_ddrmode_ctl = 0x00020000, > @@ -112,7 +112,7 @@ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { > .grp_b7ds = IMX6DQ_DRIVE_STRENGTH, > }; > > -/* configure MX6QP mmdc GRP io registers */ > +/* configure i.MX6QP mmdc GRP io registers */ > static struct mx6dq_iomux_grp_regs mx6qp_grp_ioregs = { > .grp_ddr_type = 0x000c0000, > .grp_ddrmode_ctl = 0x00020000, > diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c > index 1e7c11e670..b9972d44a7 100644 > --- a/board/wandboard/wandboard.c > +++ b/board/wandboard/wandboard.c > @@ -511,11 +511,11 @@ int board_late_init(void) > > #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > if (is_mx6dqp()) > - env_set("board_rev", "MX6QP"); > + env_set("board_rev", "i.MX6QP"); > else if (is_mx6dq()) > - env_set("board_rev", "MX6Q"); > + env_set("board_rev", "i.MX6Q"); > else > - env_set("board_rev", "MX6DL"); > + env_set("board_rev", "i.MX6DL"); > > if (is_revd1()) > env_set("board_name", "D1"); > diff --git a/cmd/fastboot/Kconfig b/cmd/fastboot/Kconfig > index 0d2c2f131e..bba199b3ef 100644 > --- a/cmd/fastboot/Kconfig > +++ b/cmd/fastboot/Kconfig > @@ -30,7 +30,8 @@ if USB_FUNCTION_FASTBOOT > > config FASTBOOT_BUF_ADDR > hex "Define FASTBOOT buffer address" > - default 0x82000000 if MX6SX || MX6SL || MX6UL || MX6SLL > + default 0x82000000 if SOC_IMX6SX || SOC_IMX6SL || SOC_IMX6UL || \ > + SOC_IMX6SLL > default 0x81000000 if ARCH_OMAP2PLUS > default 0x42000000 if ARCH_SUNXI && !MACH_SUN9I > default 0x22000000 if ARCH_SUNXI && MACH_SUN9I > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > index b9b9e0f3a0..af27f2d7b7 100644 > --- a/common/spl/Kconfig > +++ b/common/spl/Kconfig > @@ -56,7 +56,7 @@ config SPL_BOOTROM_SUPPORT > > config SPL_RAW_IMAGE_SUPPORT > bool "Support SPL loading and booting of RAW images" > - default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT)) > + default n if (ARCH_IMX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT)) > default y if !TI_SECURE_DEVICE > help > SPL will support loading and booting a RAW image when this option > @@ -143,7 +143,7 @@ config SPL_DISPLAY_PRINT > > config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR > bool "MMC raw mode: by sector" > - default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER ||ARCH_MX6 || \ > + default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER ||ARCH_IMX6 || \ > ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \ > ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \ > OMAP44XX || OMAP54XX || AM33XX || AM43XX > @@ -156,7 +156,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR > depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR > default 0x50 if ARCH_SUNXI > default 0x75 if ARCH_DAVINCI > - default 0x8a if ARCH_MX6 > + default 0x8a if ARCH_IMX6 > default 0x100 if ARCH_UNIPHIER > default 0x140 if ARCH_MVEBU > default 0x200 if ARCH_SOCFPGA || ARCH_AT91 > diff --git a/common/spl/spl.c b/common/spl/spl.c > index b1ce56d0d0..c6fcaac15a 100644 > --- a/common/spl/spl.c > +++ b/common/spl/spl.c > @@ -399,7 +399,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) > if (spl_init()) > hang(); > } > -#if !defined(CONFIG_PPC) && !defined(CONFIG_ARCH_MX6) > +#if !defined(CONFIG_PPC) && !defined(CONFIG_ARCH_IMX6) > /* > * timer_init() does not exist on PPC systems. The timer is initialized > * and enabled (decrementer) in interrupt_init() here. > diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig > index 7b6adadc14..b27648b460 100644 > --- a/configs/apalis_imx6_defconfig > +++ b/configs/apalis_imx6_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -9,7 +9,7 @@ CONFIG_SPL_MMC_SUPPORT=y > CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_CMD_HDMIDETECT=y > CONFIG_ENV_VARS_UBOOT_CONFIG=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=1 > # CONFIG_CONSOLE_MUX is not set > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/apalis_imx6_nospl_com_defconfig b/configs/apalis_imx6_nospl_com_defconfig > index d6e3787221..eee36a21c5 100644 > --- a/configs/apalis_imx6_nospl_com_defconfig > +++ b/configs/apalis_imx6_nospl_com_defconfig > @@ -1,11 +1,11 @@ > CONFIG_ARM=y > CONFIG_SYS_THUMB_BUILD=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_APALIS_IMX6=y > CONFIG_CMD_HDMIDETECT=y > CONFIG_ENV_VARS_UBOOT_CONFIG=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=1024" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,SOC_IMX6Q,DDR_MB=1024" > CONFIG_BOOTDELAY=1 > # CONFIG_CONSOLE_MUX is not set > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/apalis_imx6_nospl_it_defconfig b/configs/apalis_imx6_nospl_it_defconfig > index 306f96763b..2d45b9107d 100644 > --- a/configs/apalis_imx6_nospl_it_defconfig > +++ b/configs/apalis_imx6_nospl_it_defconfig > @@ -1,11 +1,11 @@ > CONFIG_ARM=y > CONFIG_SYS_THUMB_BUILD=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_APALIS_IMX6=y > CONFIG_CMD_HDMIDETECT=y > CONFIG_ENV_VARS_UBOOT_CONFIG=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=2048" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,SOC_IMX6Q,DDR_MB=2048" > CONFIG_BOOTDELAY=1 > # CONFIG_CONSOLE_MUX is not set > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig > index 8343846e19..040f8613be 100644 > --- a/configs/aristainetos2_defconfig > +++ b/configs/aristainetos2_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_ARISTAINETOS2=y > CONFIG_FIT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,SOC_IMX6DL" > CONFIG_BOOTDELAY=3 > # CONFIG_CONSOLE_MUX is not set > CONFIG_SYS_CONSOLE_IS_IN_ENV=y > diff --git a/configs/aristainetos2b_defconfig b/configs/aristainetos2b_defconfig > index b49b1f24d0..f23b24596f 100644 > --- a/configs/aristainetos2b_defconfig > +++ b/configs/aristainetos2b_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_ARISTAINETOS2B=y > CONFIG_FIT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,SOC_IMX6DL" > CONFIG_BOOTDELAY=3 > # CONFIG_CONSOLE_MUX is not set > CONFIG_SYS_CONSOLE_IS_IN_ENV=y > diff --git a/configs/aristainetos_defconfig b/configs/aristainetos_defconfig > index cc713e29bd..80d22a5f17 100644 > --- a/configs/aristainetos_defconfig > +++ b/configs/aristainetos_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_ARISTAINETOS=y > CONFIG_FIT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,SOC_IMX6DL" > CONFIG_BOOTDELAY=3 > # CONFIG_CONSOLE_MUX is not set > CONFIG_SYS_CONSOLE_IS_IN_ENV=y > diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig > index 2ac0bac0b6..04644c3eaf 100644 > --- a/configs/cgtqmx6eval_defconfig > +++ b/configs/cgtqmx6eval_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig > index 183ad4282b..79b3529525 100644 > --- a/configs/cm_fx6_defconfig > +++ b/configs/cm_fx6_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig > index b982a5eae8..e908b543f9 100644 > --- a/configs/colibri_imx6_defconfig > +++ b/configs/colibri_imx6_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -9,7 +9,7 @@ CONFIG_SPL_MMC_SUPPORT=y > CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_CMD_HDMIDETECT=y > CONFIG_ENV_VARS_UBOOT_CONFIG=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6DL" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6DL" > CONFIG_BOOTDELAY=1 > # CONFIG_CONSOLE_MUX is not set > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/colibri_imx6_nospl_defconfig b/configs/colibri_imx6_nospl_defconfig > index c5088215e8..2f747c2e97 100644 > --- a/configs/colibri_imx6_nospl_defconfig > +++ b/configs/colibri_imx6_nospl_defconfig > @@ -1,11 +1,11 @@ > CONFIG_ARM=y > CONFIG_SYS_THUMB_BUILD=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_COLIBRI_IMX6=y > CONFIG_CMD_HDMIDETECT=y > CONFIG_ENV_VARS_UBOOT_CONFIG=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx6/colibri_imx6.cfg,MX6DL,DDR_MB=256" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx6/colibri_imx6.cfg,SOC_IMX6DL,DDR_MB=256" > CONFIG_BOOTDELAY=1 > # CONFIG_CONSOLE_MUX is not set > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig > index 2b4fe9c2c5..838fb7a1fe 100644 > --- a/configs/dh_imx6_defconfig > +++ b/configs/dh_imx6_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/display5_defconfig b/configs/display5_defconfig > index a0d9eaee97..7080849fa1 100644 > --- a/configs/display5_defconfig > +++ b/configs/display5_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -13,7 +13,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5" > CONFIG_FIT=y > CONFIG_SPL_LOAD_FIT=y > CONFIG_OF_BOARD_SETUP=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_SPL=y > # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set > diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig > index 632b32ac61..a0eca39956 100644 > --- a/configs/display5_factory_defconfig > +++ b/configs/display5_factory_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -10,7 +10,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y > CONFIG_SPL_SPI_SUPPORT=y > CONFIG_FIT=y > CONFIG_OF_BOARD_SETUP=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=3 > CONFIG_USE_BOOTCOMMAND=y > CONFIG_BOOTCOMMAND="run factory" > diff --git a/configs/dms-ba16-1g_defconfig b/configs/dms-ba16-1g_defconfig > index 40b317093f..ee365989b5 100644 > --- a/configs/dms-ba16-1g_defconfig > +++ b/configs/dms-ba16-1g_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_ADVANTECH_DMS_BA16=y > CONFIG_SYS_DDR_1G=y > diff --git a/configs/dms-ba16_defconfig b/configs/dms-ba16_defconfig > index 3519c5275c..1d2663e6e6 100644 > --- a/configs/dms-ba16_defconfig > +++ b/configs/dms-ba16_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_ADVANTECH_DMS_BA16=y > CONFIG_BOOTDELAY=1 > diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig > index 045380b6de..e6c6f86ce4 100644 > --- a/configs/ge_b450v3_defconfig > +++ b/configs/ge_b450v3_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_GE_B450V3=y > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig > index 9d4b8aeebe..720ac2ab1e 100644 > --- a/configs/ge_b650v3_defconfig > +++ b/configs/ge_b650v3_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_GE_B650V3=y > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig > index 94785681be..febce1481f 100644 > --- a/configs/ge_b850v3_defconfig > +++ b/configs/ge_b850v3_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_GE_B850V3=y > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig > index a6db1040b6..cf745dd62f 100644 > --- a/configs/gwventana_emmc_defconfig > +++ b/configs/gwventana_emmc_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig > index 41b93c8a07..2633a72473 100644 > --- a/configs/gwventana_gw5904_defconfig > +++ b/configs/gwventana_gw5904_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig > index e513289583..e58aeb459f 100644 > --- a/configs/gwventana_nand_defconfig > +++ b/configs/gwventana_nand_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig > index d17f9cfed9..282a23d090 100644 > --- a/configs/imx6dl_icore_nand_defconfig > +++ b/configs/imx6dl_icore_nand_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig > index 2a86059226..937b5e5236 100644 > --- a/configs/imx6q_icore_nand_defconfig > +++ b/configs/imx6q_icore_nand_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig > index e6b3264e94..f349554723 100644 > --- a/configs/imx6q_logic_defconfig > +++ b/configs/imx6q_logic_defconfig > @@ -1,10 +1,10 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_MX6LOGICPD=y > CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd" > CONFIG_DISTRO_DEFAULTS=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=3 > # CONFIG_USE_BOOTCOMMAND is not set > CONFIG_SYS_CONSOLE_IS_IN_ENV=y > diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig > index 6dc8d2fe13..4d8c07af0b 100644 > --- a/configs/imx6qdl_icore_mipi_defconfig > +++ b/configs/imx6qdl_icore_mipi_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig > index a3f5e8fc34..4eb68b21de 100644 > --- a/configs/imx6qdl_icore_mmc_defconfig > +++ b/configs/imx6qdl_icore_mmc_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig > index 2a86059226..937b5e5236 100644 > --- a/configs/imx6qdl_icore_nand_defconfig > +++ b/configs/imx6qdl_icore_nand_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig > index 6c8fb85ca2..f5d2067435 100644 > --- a/configs/imx6qdl_icore_rqs_defconfig > +++ b/configs/imx6qdl_icore_rqs_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig > index b6d8680b08..f4d71d28dc 100644 > --- a/configs/imx6ul_geam_mmc_defconfig > +++ b/configs/imx6ul_geam_mmc_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig > index a8eb08bf5d..9f60e9fb8c 100644 > --- a/configs/imx6ul_geam_nand_defconfig > +++ b/configs/imx6ul_geam_nand_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig > index a9bfbfd254..774cf4ebbf 100644 > --- a/configs/imx6ul_isiot_emmc_defconfig > +++ b/configs/imx6ul_isiot_emmc_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig > index ba898e6e16..d5b12e3709 100644 > --- a/configs/imx6ul_isiot_nand_defconfig > +++ b/configs/imx6ul_isiot_nand_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig > index 22872b3ece..98b2e02bef 100644 > --- a/configs/liteboard_defconfig > +++ b/configs/liteboard_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig > index 76b55df0c2..309b92a50d 100644 > --- a/configs/marsboard_defconfig > +++ b/configs/marsboard_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_EMBESTMX6BOARDS=y > CONFIG_DISTRO_DEFAULTS=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,SOC_IMX6Q,DDR_MB=1024" > CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" > # CONFIG_CONSOLE_MUX is not set > CONFIG_SYS_CONSOLE_IS_IN_ENV=y > diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig > index da1d502959..38200e7a76 100644 > --- a/configs/mccmon6_nor_defconfig > +++ b/configs/mccmon6_nor_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig > index cbfd125fb0..defbf82ec7 100644 > --- a/configs/mccmon6_sd_defconfig > +++ b/configs/mccmon6_sd_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig > index 14f128a96b..4b5b2d5bd8 100644 > --- a/configs/mx6cuboxi_defconfig > +++ b/configs/mx6cuboxi_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/mx6dlarm2_defconfig b/configs/mx6dlarm2_defconfig > index 1dc4e975ff..a7c3fa8c79 100644 > --- a/configs/mx6dlarm2_defconfig > +++ b/configs/mx6dlarm2_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_MX6QARM2=y > # CONFIG_CMD_BMODE is not set > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,DDR_MB=2048" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,SOC_IMX6DL,DDR_MB=2048" > CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/mx6dlarm2_lpddr2_defconfig b/configs/mx6dlarm2_lpddr2_defconfig > index 8f07f8feea..b6f2be823b 100644 > --- a/configs/mx6dlarm2_lpddr2_defconfig > +++ b/configs/mx6dlarm2_lpddr2_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_MX6QARM2=y > # CONFIG_CMD_BMODE is not set > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,MX6DL_LPDDR2,DDR_MB=512" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,SOC_IMX6DL,MX6DL_LPDDR2,DDR_MB=512" > CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig > index fdcef6b65b..ee5bca2963 100644 > --- a/configs/mx6memcal_defconfig > +++ b/configs/mx6memcal_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > @@ -7,7 +7,7 @@ CONFIG_MX6_DDRCAL=y > CONFIG_TARGET_MX6MEMCAL=y > CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_SPL_WATCHDOG_SUPPORT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,MX6QDL" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,SOC_IMX6QDL" > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_SPL=y > CONFIG_SPL_USB_HOST_SUPPORT=y > diff --git a/configs/mx6qarm2_defconfig b/configs/mx6qarm2_defconfig > index 925fc16d6c..db2a771b0d 100644 > --- a/configs/mx6qarm2_defconfig > +++ b/configs/mx6qarm2_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_MX6QARM2=y > # CONFIG_CMD_BMODE is not set > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,DDR_MB=2048" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,SOC_IMX6Q,DDR_MB=2048" > CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/mx6qarm2_lpddr2_defconfig b/configs/mx6qarm2_lpddr2_defconfig > index b907cb4225..d61bc73d4f 100644 > --- a/configs/mx6qarm2_lpddr2_defconfig > +++ b/configs/mx6qarm2_lpddr2_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_MX6QARM2=y > # CONFIG_CMD_BMODE is not set > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,MX6DQ_LPDDR2,DDR_MB=512" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,SOC_IMX6Q,MX6DQ_LPDDR2,DDR_MB=512" > CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig > index 2b45dc17fd..f6f1a60f11 100644 > --- a/configs/mx6qsabrelite_defconfig > +++ b/configs/mx6qsabrelite_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,SOC_IMX6Q,DDR_MB=1024,SABRELITE" > CONFIG_BOOTDELAY=3 > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig > index ee6ca57b00..114830c29f 100644 > --- a/configs/mx6sabreauto_defconfig > +++ b/configs/mx6sabreauto_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig > index 83b8bed52b..41c8984cad 100644 > --- a/configs/mx6sabresd_defconfig > +++ b/configs/mx6sabresd_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig > index a49e9cd72a..eeb98d63b0 100644 > --- a/configs/mx6slevk_defconfig > +++ b/configs/mx6slevk_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_MX6SLEVK=y > # CONFIG_CMD_BMODE is not set > diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig > index 76fc584055..6d3bb56ab8 100644 > --- a/configs/mx6slevk_spinor_defconfig > +++ b/configs/mx6slevk_spinor_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_MX6SLEVK=y > # CONFIG_CMD_BMODE is not set > diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig > index c021b39ba0..3101c393b3 100644 > --- a/configs/mx6slevk_spl_defconfig > +++ b/configs/mx6slevk_spl_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/mx6sllevk_defconfig b/configs/mx6sllevk_defconfig > index 39c1cef3ce..f6dad44279 100644 > --- a/configs/mx6sllevk_defconfig > +++ b/configs/mx6sllevk_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_MX6SLLEVK=y > # CONFIG_CMD_BMODE is not set > diff --git a/configs/mx6sllevk_plugin_defconfig b/configs/mx6sllevk_plugin_defconfig > index 86f5195805..2395dc5971 100644 > --- a/configs/mx6sllevk_plugin_defconfig > +++ b/configs/mx6sllevk_plugin_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_MX6SLLEVK=y > CONFIG_USE_IMXIMG_PLUGIN=y > diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig > index 2ea2877b5c..aa1d66ef0c 100644 > --- a/configs/mx6sxsabreauto_defconfig > +++ b/configs/mx6sxsabreauto_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_MX6SXSABREAUTO=y > # CONFIG_CMD_BMODE is not set > diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig > index 2856a7fd8a..e24a69c2dc 100644 > --- a/configs/mx6sxsabresd_defconfig > +++ b/configs/mx6sxsabresd_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_MX6SXSABRESD=y > # CONFIG_CMD_BMODE is not set > diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig > index 146c801404..ea8023d115 100644 > --- a/configs/mx6sxsabresd_spl_defconfig > +++ b/configs/mx6sxsabresd_spl_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig > index a9926859b7..78e570fecf 100644 > --- a/configs/mx6ul_14x14_evk_defconfig > +++ b/configs/mx6ul_14x14_evk_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/mx6ul_9x9_evk_defconfig b/configs/mx6ul_9x9_evk_defconfig > index a36a872bac..f484710118 100644 > --- a/configs/mx6ul_9x9_evk_defconfig > +++ b/configs/mx6ul_9x9_evk_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/mx6ull_14x14_evk_defconfig b/configs/mx6ull_14x14_evk_defconfig > index 375db54a75..711a436145 100644 > --- a/configs/mx6ull_14x14_evk_defconfig > +++ b/configs/mx6ull_14x14_evk_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_MX6ULL_14X14_EVK=y > CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk" > diff --git a/configs/mx6ull_14x14_evk_plugin_defconfig b/configs/mx6ull_14x14_evk_plugin_defconfig > index ce2271549e..b37b39cc58 100644 > --- a/configs/mx6ull_14x14_evk_plugin_defconfig > +++ b/configs/mx6ull_14x14_evk_plugin_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_MX6ULL_14X14_EVK=y > CONFIG_USE_IMXIMG_PLUGIN=y > diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig > index c109aa3b97..40db9a7127 100644 > --- a/configs/nitrogen6dl2g_defconfig > +++ b/configs/nitrogen6dl2g_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,SOC_IMX6DL,DDR_MB=2048" > CONFIG_BOOTDELAY=3 > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig > index 462229e159..d060ae3ffe 100644 > --- a/configs/nitrogen6dl_defconfig > +++ b/configs/nitrogen6dl_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,SOC_IMX6DL,DDR_MB=1024" > CONFIG_BOOTDELAY=3 > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig > index 79c8de3d8e..277f3211ea 100644 > --- a/configs/nitrogen6q2g_defconfig > +++ b/configs/nitrogen6q2g_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,SOC_IMX6Q,DDR_MB=2048" > CONFIG_BOOTDELAY=3 > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig > index 2895b6e958..70c3a9eb60 100644 > --- a/configs/nitrogen6q_defconfig > +++ b/configs/nitrogen6q_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,SOC_IMX6Q,DDR_MB=1024" > CONFIG_BOOTDELAY=3 > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig > index e7348af733..664ab44a04 100644 > --- a/configs/nitrogen6s1g_defconfig > +++ b/configs/nitrogen6s1g_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SOC_IMX6S,DDR_MB=1024" > CONFIG_BOOTDELAY=3 > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig > index e9e9f73176..81f97086c7 100644 > --- a/configs/nitrogen6s_defconfig > +++ b/configs/nitrogen6s_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,SOC_IMX6S,DDR_MB=512" > CONFIG_BOOTDELAY=3 > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > CONFIG_SUPPORT_RAW_INITRD=y > diff --git a/configs/novena_defconfig b/configs/novena_defconfig > index 75cc57b7e1..99055a4b96 100644 > --- a/configs/novena_defconfig > +++ b/configs/novena_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -14,7 +14,7 @@ CONFIG_SPL_FAT_SUPPORT=y > CONFIG_CMD_HDMIDETECT=y > CONFIG_DISTRO_DEFAULTS=y > CONFIG_FIT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_USE_BOOTARGS=y > CONFIG_BOOTARGS="console=ttymxc1,115200 " > CONFIG_BOOTCOMMAND="run distro_bootcmd ; run net_nfs" > diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig > index d4c8db23fd..448c6876f2 100644 > --- a/configs/opos6uldev_defconfig > +++ b/configs/opos6uldev_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > diff --git a/configs/ot1200_defconfig b/configs/ot1200_defconfig > index e5baed1ada..6851db14d6 100644 > --- a/configs/ot1200_defconfig > +++ b/configs/ot1200_defconfig > @@ -1,8 +1,8 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_OT1200=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/ot1200_spl_defconfig b/configs/ot1200_spl_defconfig > index 29bbb9d012..52affefbc6 100644 > --- a/configs/ot1200_spl_defconfig > +++ b/configs/ot1200_spl_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -9,7 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_SPL_SPI_FLASH_SUPPORT=y > CONFIG_SPL_SPI_SUPPORT=y > CONFIG_SPL_WATCHDOG_SUPPORT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig > index b52499d161..aae4ea6ec5 100644 > --- a/configs/pcm058_defconfig > +++ b/configs/pcm058_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -14,7 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y > CONFIG_CMD_HDMIDETECT=y > CONFIG_DISTRO_DEFAULTS=y > CONFIG_FIT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=3 > # CONFIG_USE_BOOTCOMMAND is not set > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/pfla02_defconfig b/configs/pfla02_defconfig > index c1ced48d9b..1af404cab1 100644 > --- a/configs/pfla02_defconfig > +++ b/configs/pfla02_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig > index c6fa11a9b4..67020dbfb4 100644 > --- a/configs/pico-imx6ul_defconfig > +++ b/configs/pico-imx6ul_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_PICO_IMX6UL=y > # CONFIG_CMD_BMODE is not set > diff --git a/configs/platinum_picon_defconfig b/configs/platinum_picon_defconfig > index c466d14db7..6cba40eb62 100644 > --- a/configs/platinum_picon_defconfig > +++ b/configs/platinum_picon_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -10,7 +10,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_SPL_LIBDISK_SUPPORT=y > CONFIG_SPL_NAND_SUPPORT=y > CONFIG_SPL_WATCHDOG_SUPPORT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6DL" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6DL" > CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/platinum_titanium_defconfig b/configs/platinum_titanium_defconfig > index 298261d26a..3866e031da 100644 > --- a/configs/platinum_titanium_defconfig > +++ b/configs/platinum_titanium_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -10,7 +10,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_SPL_LIBDISK_SUPPORT=y > CONFIG_SPL_NAND_SUPPORT=y > CONFIG_SPL_WATCHDOG_SUPPORT=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig > index dd7df83959..69701359f9 100644 > --- a/configs/riotboard_defconfig > +++ b/configs/riotboard_defconfig > @@ -1,9 +1,9 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_EMBESTMX6BOARDS=y > CONFIG_DISTRO_DEFAULTS=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SOC_IMX6S,DDR_MB=1024" > CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" > # CONFIG_CONSOLE_MUX is not set > CONFIG_SYS_CONSOLE_IS_IN_ENV=y > diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig > index f1136609c3..657a8fb7b0 100644 > --- a/configs/secomx6quq7_defconfig > +++ b/configs/secomx6quq7_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_SECOMX6=y > CONFIG_SECOMX6_UQ7=y > @@ -9,7 +9,7 @@ CONFIG_BOOTDELAY=3 > CONFIG_SUPPORT_RAW_INITRD=y > CONFIG_BOARD_EARLY_INIT_F=y > CONFIG_HUSH_PARSER=y > -CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > " > +CONFIG_SYS_PROMPT="SECO i.MX6Q uQ7 U-Boot > " > CONFIG_CMD_BOOTZ=y > # CONFIG_CMD_FLASH is not set > CONFIG_CMD_GPIO=y > diff --git a/configs/sksimx6_defconfig b/configs/sksimx6_defconfig > index c5cb7134f5..c32813cd16 100644 > --- a/configs/sksimx6_defconfig > +++ b/configs/sksimx6_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -14,7 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y > CONFIG_DISTRO_DEFAULTS=y > CONFIG_FIT=y > CONFIG_FIT_VERBOSE=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6QDL" > CONFIG_BOOTDELAY=1 > # CONFIG_USE_BOOTCOMMAND is not set > CONFIG_SILENT_CONSOLE=y > diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig > index 567f80be84..e52e8ab8d8 100644 > --- a/configs/tbs2910_defconfig > +++ b/configs/tbs2910_defconfig > @@ -1,6 +1,6 @@ > CONFIG_ARM=y > CONFIG_SYS_THUMB_BUILD=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_TBS2910=y > CONFIG_CMD_HDMIDETECT=y > diff --git a/configs/titanium_defconfig b/configs/titanium_defconfig > index 2267039363..360c04d6dd 100644 > --- a/configs/titanium_defconfig > +++ b/configs/titanium_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_TITANIUM=y > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/barco/titanium/imximage.cfg" > diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig > index 3a6a9f04c6..9ff81c690b 100644 > --- a/configs/tqma6dl_mba6_mmc_defconfig > +++ b/configs/tqma6dl_mba6_mmc_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x4fc00000 > CONFIG_TARGET_TQMA6=y > CONFIG_TQMA6DL=y > diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig > index 35f58a2642..9b14458563 100644 > --- a/configs/tqma6dl_mba6_spi_defconfig > +++ b/configs/tqma6dl_mba6_spi_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x4fc00000 > CONFIG_TARGET_TQMA6=y > CONFIG_TQMA6DL=y > diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig > index 4a4803d969..ea492ba27f 100644 > --- a/configs/tqma6q_mba6_mmc_defconfig > +++ b/configs/tqma6q_mba6_mmc_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x4fc00000 > CONFIG_TARGET_TQMA6=y > CONFIG_FIT=y > diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig > index a37ab54511..2e5f8dc5d0 100644 > --- a/configs/tqma6q_mba6_spi_defconfig > +++ b/configs/tqma6q_mba6_spi_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x4fc00000 > CONFIG_TARGET_TQMA6=y > CONFIG_TQMA6X_SPI_BOOT=y > diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig > index dec79e044f..e307c8631f 100644 > --- a/configs/tqma6s_mba6_mmc_defconfig > +++ b/configs/tqma6s_mba6_mmc_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x2fc00000 > CONFIG_TARGET_TQMA6=y > CONFIG_TQMA6S=y > diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig > index ba257b81d2..cac256b0c4 100644 > --- a/configs/tqma6s_mba6_spi_defconfig > +++ b/configs/tqma6s_mba6_spi_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x2fc00000 > CONFIG_TARGET_TQMA6=y > CONFIG_TQMA6S=y > diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig > index 995a1ced0f..d0600f53b9 100644 > --- a/configs/tqma6s_wru4_mmc_defconfig > +++ b/configs/tqma6s_wru4_mmc_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x2fc00000 > CONFIG_TARGET_TQMA6=y > CONFIG_TQMA6S=y > diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig > index 0e88f2b470..a88a2f788f 100644 > --- a/configs/udoo_defconfig > +++ b/configs/udoo_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig > index dff2896749..d3623c2150 100644 > --- a/configs/udoo_neo_defconfig > +++ b/configs/udoo_neo_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig > index 844809d8e6..b0784b5669 100644 > --- a/configs/vining_2000_defconfig > +++ b/configs/vining_2000_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_SAMTEC_VINING_2000=y > # CONFIG_CMD_BMODE is not set > diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig > index 2c739fae1c..bdd53f747a 100644 > --- a/configs/wandboard_defconfig > +++ b/configs/wandboard_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/warp_defconfig b/configs/warp_defconfig > index bddf4bcf1d..9996c4363a 100644 > --- a/configs/warp_defconfig > +++ b/configs/warp_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_WARP=y > # CONFIG_CMD_BMODE is not set > diff --git a/configs/xpress_defconfig b/configs/xpress_defconfig > index 4a3ddccd3c..05d9e3ee6f 100644 > --- a/configs/xpress_defconfig > +++ b/configs/xpress_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_TARGET_XPRESS=y > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ccv/xpress/imximage.cfg" > diff --git a/configs/xpress_spl_defconfig b/configs/xpress_spl_defconfig > index 3425d5325f..478ab27a13 100644 > --- a/configs/xpress_spl_defconfig > +++ b/configs/xpress_spl_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x87800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > diff --git a/configs/zc5202_defconfig b/configs/zc5202_defconfig > index 82e8fc33a8..ae489ad161 100644 > --- a/configs/zc5202_defconfig > +++ b/configs/zc5202_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -12,7 +12,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y > CONFIG_SPL_SPI_SUPPORT=y > CONFIG_SPL_WATCHDOG_SUPPORT=y > CONFIG_DISTRO_DEFAULTS=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=3 > CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" > CONFIG_DEFAULT_FDT_FILE="imx6q-zc5202.dtb" > diff --git a/configs/zc5601_defconfig b/configs/zc5601_defconfig > index cd2f5216c9..b643e2abfa 100644 > --- a/configs/zc5601_defconfig > +++ b/configs/zc5601_defconfig > @@ -1,5 +1,5 @@ > CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > +CONFIG_ARCH_IMX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > @@ -12,7 +12,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y > CONFIG_SPL_SPI_SUPPORT=y > CONFIG_SPL_WATCHDOG_SUPPORT=y > CONFIG_DISTRO_DEFAULTS=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SOC_IMX6Q" > CONFIG_BOOTDELAY=3 > CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" > CONFIG_DEFAULT_FDT_FILE="imx6q-zc5601.dtb" > diff --git a/doc/README.imx6 b/doc/README.imx6 > index b0644f8491..63a73f1bbf 100644 > --- a/doc/README.imx6 > +++ b/doc/README.imx6 > @@ -14,7 +14,7 @@ SoC. > > Example: > > -For reading the MAC address fuses on a MX6Q: > +For reading the MAC address fuses on a i.MX6Q: > > - The MAC address is stored in two fuse addresses (the fuse addresses are > described in the Fusemap Descriptions table from the mx6q Reference Manual): > diff --git a/doc/README.imximage b/doc/README.imximage > index 803682f558..9ae88bc337 100644 > --- a/doc/README.imximage > +++ b/doc/README.imximage > @@ -3,11 +3,11 @@ Imximage Boot Image generation using mkimage > --------------------------------------------- > > This document describes how to set up a U-Boot image that can be booted > -by Freescale MX25, MX35, MX51, MX53 and MX6 processors via internal boot > +by Freescale MX25, MX35, MX51, MX53 and i.MX6 processors via internal boot > mode. > > These processors can boot directly from NAND, SPI flash and SD card flash > -using its internal boot ROM support. MX6 processors additionally support > +using its internal boot ROM support. i.MX6 processors additionally support > boot from NOR flash and SATA disks. All processors can boot from an internal > UART, if booting from device media fails. > Booting from NOR flash does not require to use this image type. > diff --git a/drivers/ata/dwc_ahsata.c b/drivers/ata/dwc_ahsata.c > index 480ae115af..2c7714ab53 100644 > --- a/drivers/ata/dwc_ahsata.c > +++ b/drivers/ata/dwc_ahsata.c > @@ -885,7 +885,7 @@ int init_sata(int dev) > { > struct ahci_uc_priv *uc_priv = NULL; > > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > if (!is_mx6dq() && !is_mx6dqp()) > return 1; > #endif > diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c > index aadf851101..8ed1b4ea4a 100644 > --- a/drivers/crypto/fsl/jobdesc.c > +++ b/drivers/crypto/fsl/jobdesc.c > @@ -14,7 +14,7 @@ > #include "jobdesc.h" > #include "rsa_caam.h" > > -#if defined(CONFIG_MX6) || defined(CONFIG_MX7) > +#if defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7) > /*! > * Secure memory run command > * > diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig > index 4ee6afad35..e904e98cd3 100644 > --- a/drivers/dma/Kconfig > +++ b/drivers/dma/Kconfig > @@ -21,7 +21,7 @@ config TI_EDMA3 > > config APBH_DMA > bool "Support APBH DMA" > - depends on MX23 || MX28 || MX6 || MX7 > + depends on MX23 || MX28 || SOC_IMX6 || MX7 > help > Enable APBH DMA driver. > > diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c > index fea8767d7b..6365fb779d 100644 > --- a/drivers/dma/apbh_dma.c > +++ b/drivers/dma/apbh_dma.c > @@ -215,7 +215,7 @@ static int mxs_dma_reset(int channel) > #if defined(CONFIG_MX23) > uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set); > uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET; > -#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7)) > +#elif (defined(CONFIG_MX28) || defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set); > uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET; > #endif > diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c > index d0e365a54b..3ad08bf767 100644 > --- a/drivers/gpio/mxc_gpio.c > +++ b/drivers/gpio/mxc_gpio.c > @@ -40,19 +40,20 @@ static unsigned long gpio_ports[] = { > [1] = GPIO2_BASE_ADDR, > [2] = GPIO3_BASE_ADDR, > #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ > - defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ > + defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ > defined(CONFIG_MX7) || defined(CONFIG_MX8M) > [3] = GPIO4_BASE_ADDR, > #endif > -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ > +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ > defined(CONFIG_MX7) || defined(CONFIG_MX8M) > [4] = GPIO5_BASE_ADDR, > -#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_MX8M)) > +#if !(defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) || \ > + defined(CONFIG_MX8M)) > [5] = GPIO6_BASE_ADDR, > #endif > #endif > -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_MX7) > -#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#if defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7) > +#if !(defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) > [6] = GPIO7_BASE_ADDR, > #endif > #endif > @@ -349,18 +350,18 @@ static const struct mxc_gpio_plat mxc_plat[] = { > { 1, (struct gpio_regs *)GPIO2_BASE_ADDR }, > { 2, (struct gpio_regs *)GPIO3_BASE_ADDR }, > #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ > - defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ > + defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ > defined(CONFIG_MX8M) > { 3, (struct gpio_regs *)GPIO4_BASE_ADDR }, > #endif > -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ > +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ > defined(CONFIG_MX8M) > { 4, (struct gpio_regs *)GPIO5_BASE_ADDR }, > #ifndef CONFIG_MX8M > { 5, (struct gpio_regs *)GPIO6_BASE_ADDR }, > #endif > #endif > -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) > +#if defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) > { 6, (struct gpio_regs *)GPIO7_BASE_ADDR }, > #endif > }; > @@ -370,18 +371,18 @@ U_BOOT_DEVICES(mxc_gpios) = { > { "gpio_mxc", &mxc_plat[1] }, > { "gpio_mxc", &mxc_plat[2] }, > #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ > - defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ > + defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ > defined(CONFIG_MX8M) > { "gpio_mxc", &mxc_plat[3] }, > #endif > -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ > +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) || \ > defined(CONFIG_MX8M) > { "gpio_mxc", &mxc_plat[4] }, > #ifndef CONFIG_MX8M > { "gpio_mxc", &mxc_plat[5] }, > #endif > #endif > -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) > +#if defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6) > { "gpio_mxc", &mxc_plat[6] }, > #endif > }; > diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig > index 3299ef0fea..cd3ba8c7a4 100644 > --- a/drivers/i2c/Kconfig > +++ b/drivers/i2c/Kconfig > @@ -150,7 +150,7 @@ config SYS_I2C_MESON > > config SYS_I2C_MXC > bool "NXP i.MX I2C driver" > - depends on MX6 > + depends on SOC_IMX6 > help > Add support for the NXP i.MX I2C driver. This supports upto for bus > channels and operating on standard mode upto 100 kbits/s and fast > diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c > index 8662e82cfa..667e82bb21 100644 > --- a/drivers/misc/mxc_ocotp.c > +++ b/drivers/misc/mxc_ocotp.c > @@ -66,11 +66,11 @@ > > #define WRITE_POSTAMBLE_US 2 > > -#if defined(CONFIG_MX6) || defined(CONFIG_VF610) > +#if defined(CONFIG_SOC_IMX6) || defined(CONFIG_VF610) > #define FUSE_BANK_SIZE 0x80 > -#ifdef CONFIG_MX6SL > +#ifdef CONFIG_SOC_IMX6SL > #define FUSE_BANKS 8 > -#elif defined(CONFIG_MX6ULL) || defined(CONFIG_MX6SLL) > +#elif defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX6SLL) > #define FUSE_BANKS 9 > #else > #define FUSE_BANKS 16 > @@ -88,7 +88,7 @@ > #error "Unsupported architecture\n" > #endif > > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > > /* > * There is a hole in shadow registers address map of size 0x100 > diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig > index 5f67e336db..d92759bd26 100644 > --- a/drivers/mmc/Kconfig > +++ b/drivers/mmc/Kconfig > @@ -210,10 +210,10 @@ config MMC_MXC > > config MMC_MXS > bool "Freescale MXS Multimedia Card Interface support" > - depends on MX23 || MX28 || MX6 || MX7 > + depends on MX23 || MX28 || SOC_IMX6 || MX7 > select APBH_DMA > - select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 > - select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 > + select APBH_DMA_BURST if ARCH_IMX6 || ARCH_MX7 > + select APBH_DMA_BURST8 if ARCH_IMX6 || ARCH_MX7 > help > This selects the Freescale SSP MMC controller found on MXS based > platforms like mx23/28. > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig > index a820af61ce..19edb98f29 100644 > --- a/drivers/mtd/nand/Kconfig > +++ b/drivers/mtd/nand/Kconfig > @@ -140,11 +140,11 @@ config NAND_MXC > > config NAND_MXS > bool "MXS NAND support" > - depends on MX23 || MX28 || MX6 || MX7 > + depends on MX23 || MX28 || SOC_IMX6 || MX7 > imply CMD_NAND > select APBH_DMA > - select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 > - select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 > + select APBH_DMA_BURST if ARCH_IMX6 || ARCH_MX7 > + select APBH_DMA_BURST8 if ARCH_IMX6 || ARCH_MX7 > help > This enables NAND driver for the NAND flash controller on the > MXS processors. > diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c > index bed9b65ef4..20cd2f4056 100644 > --- a/drivers/mtd/nand/mxs_nand.c > +++ b/drivers/mtd/nand/mxs_nand.c > @@ -30,7 +30,7 @@ > #define MXS_NAND_DMA_DESCRIPTOR_COUNT 4 > > #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512 > -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) > +#if (defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 2 > #else > #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 0 > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index de1947ccc1..7c6e0a5cb3 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -149,7 +149,7 @@ config ETHOC > > config FEC_MXC > bool "FEC Ethernet controller" > - depends on MX5 || MX6 > + depends on MX5 || SOC_IMX6 > help > This driver supports the 10/100 Fast Ethernet controller for > NXP i.MX processors. > diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c > index ff7ad91116..8ab656d388 100644 > --- a/drivers/net/fec_mxc.c > +++ b/drivers/net/fec_mxc.c > @@ -454,7 +454,7 @@ static int fec_open(struct eth_device *edev) > writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN, > &fec->eth->ecntrl); > > -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) > +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6SL) > udelay(100); > > /* setup the MII gasket for RMII mode */ > diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h > index 43a7d7bed8..d0ef86d46d 100644 > --- a/drivers/net/fec_mxc.h > +++ b/drivers/net/fec_mxc.h > @@ -127,7 +127,7 @@ struct ethernet_regs { > > uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */ > > -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) > +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6SL) > uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */ > uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */ > uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */ > @@ -193,7 +193,7 @@ struct ethernet_regs { > #define FEC_X_DES_ACTIVE_TDAR 0x01000000 > #define FEC_R_DES_ACTIVE_RDAR 0x01000000 > > -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) > +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_SOC_IMX6SL) > /* defines for MIIGSK */ > /* RMII frequency control: 0=50MHz, 1=5MHz */ > #define MIIGSK_CFGR_FRCONT (1 << 6) > diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c > index ef66a1d3f4..969d03acce 100644 > --- a/drivers/pci/pcie_imx.c > +++ b/drivers/pci/pcie_imx.c > @@ -24,7 +24,7 @@ > #define PCI_ACCESS_READ 0 > #define PCI_ACCESS_WRITE 1 > > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > #define MX6_DBI_ADDR 0x08ffc000 > #define MX6_IO_ADDR 0x08000000 > #define MX6_MEM_ADDR 0x08100000 > @@ -438,10 +438,10 @@ static int imx6_pcie_assert_core_reset(bool prepare_for_boot) > if (is_mx6dqp()) > setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST); > > -#if defined(CONFIG_MX6SX) > +#if defined(CONFIG_SOC_IMX6SX) > struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR; > > - /* SSP_EN is not used on MX6SX anymore */ > + /* SSP_EN is not used on i.MX6SX anymore */ > setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); > /* Force PCIe PHY reset */ > setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); > @@ -452,7 +452,7 @@ static int imx6_pcie_assert_core_reset(bool prepare_for_boot) > * If the bootloader already enabled the link we need some special > * handling to get the core back into a state where it is safe to > * touch it for configuration. As there is no dedicated reset signal > - * wired up for MX6QDL, we need to manually force LTSSM into "detect" > + * wired up for i.MX6QDL, we need to manually force LTSSM into "detect" > * state before completely disabling LTSSM, which is a prerequisite > * for core configuration. > * > @@ -498,7 +498,7 @@ static int imx6_pcie_init_phy(void) > IOMUXC_GPR12_LOS_LEVEL_MASK, > IOMUXC_GPR12_LOS_LEVEL_9); > > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > clrsetbits_le32(&iomuxc_regs->gpr[12], > IOMUXC_GPR12_RX_EQ_MASK, > IOMUXC_GPR12_RX_EQ_2); > @@ -587,8 +587,8 @@ static int imx6_pcie_deassert_core_reset(void) > */ > mdelay(50); > > -#if defined(CONFIG_MX6SX) > - /* SSP_EN is not used on MX6SX anymore */ > +#if defined(CONFIG_SOC_IMX6SX) > + /* SSP_EN is not used on i.MX6SX anymore */ > clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); > /* Clear PCIe PHY reset bit */ > clrbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); > diff --git a/drivers/pinctrl/nxp/Kconfig b/drivers/pinctrl/nxp/Kconfig > index b668359a0b..5bcfb731dd 100644 > --- a/drivers/pinctrl/nxp/Kconfig > +++ b/drivers/pinctrl/nxp/Kconfig > @@ -17,7 +17,7 @@ config PINCTRL_IMX5 > > config PINCTRL_IMX6 > bool "IMX6 pinctrl driver" > - depends on ARCH_MX6 && PINCTRL_FULL > + depends on ARCH_IMX6 && PINCTRL_FULL > select DEVRES > select PINCTRL_IMX > help > diff --git a/drivers/pwm/pwm-imx-util.c b/drivers/pwm/pwm-imx-util.c > index 97ac0c8fc0..89f0a4b2c4 100644 > --- a/drivers/pwm/pwm-imx-util.c > +++ b/drivers/pwm/pwm-imx-util.c > @@ -23,13 +23,13 @@ struct pwm_regs *pwm_id_to_reg(int pwm_id) > return (struct pwm_regs *)PWM1_BASE_ADDR; > case 1: > return (struct pwm_regs *)PWM2_BASE_ADDR; > -#ifdef CONFIG_MX6 > +#ifdef CONFIG_SOC_IMX6 > case 2: > return (struct pwm_regs *)PWM3_BASE_ADDR; > case 3: > return (struct pwm_regs *)PWM4_BASE_ADDR; > #endif > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > case 4: > return (struct pwm_regs *)PWM5_BASE_ADDR; > case 5: > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig > index eb718a650f..c4b9f1de48 100644 > --- a/drivers/serial/Kconfig > +++ b/drivers/serial/Kconfig > @@ -469,7 +469,7 @@ config MVEBU_A3700_UART > > config MXC_UART > bool "IMX serial port support" > - depends on MX5 || MX6 > + depends on MX5 || SOC_IMX6 > help > If you have a machine based on a Motorola IMX CPU you > can enable its onboard serial port by enabling this option. > diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c > index 5dc69a6865..ae561456eb 100644 > --- a/drivers/spi/fsl_qspi.c > +++ b/drivers/spi/fsl_qspi.c > @@ -20,8 +20,8 @@ > DECLARE_GLOBAL_DATA_PTR; > > #define RX_BUFFER_SIZE 0x80 > -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \ > - defined(CONFIG_MX6ULL) || defined(CONFIG_MX7D) > +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX7D) > #define TX_BUFFER_SIZE 0x200 > #else > #define TX_BUFFER_SIZE 0x40 > @@ -269,10 +269,10 @@ static void qspi_set_lut(struct fsl_qspi_priv *priv) > INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | > PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); > #endif > -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \ > - defined(CONFIG_MX6ULL) || defined(CONFIG_MX7D) > +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL) || defined(CONFIG_SOC_IMX7D) > /* > - * To MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly. > + * To i.MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly. > * So, Use IDATSZ in IPCR to determine the size and here set 0. > */ > qspi_write32(priv->flags, ®s->lut[lut_base + 1], OPRND0(0) | > @@ -854,14 +854,14 @@ void qspi_cfg_smpr(struct fsl_qspi_priv *priv, u32 clear_bits, u32 set_bits) > #ifndef CONFIG_DM_SPI > static unsigned long spi_bases[] = { > QSPI0_BASE_ADDR, > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > QSPI1_BASE_ADDR, > #endif > }; > > static unsigned long amba_bases[] = { > QSPI0_AMBA_BASE, > -#ifdef CONFIG_MX6SX > +#ifdef CONFIG_SOC_IMX6SX > QSPI1_AMBA_BASE, > #endif > }; > @@ -909,7 +909,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > mcr_val = qspi_read32(qspi->priv.flags, ®s->mcr); > > /* Set endianness to LE for i.mx */ > - if (IS_ENABLED(CONFIG_MX6) || IS_ENABLED(CONFIG_MX7)) > + if (IS_ENABLED(CONFIG_SOC_IMX6) || IS_ENABLED(CONFIG_MX7)) > mcr_val = QSPI_MCR_END_CFD_LE; > > qspi_write32(qspi->priv.flags, ®s->mcr, > @@ -1032,7 +1032,7 @@ static int fsl_qspi_probe(struct udevice *bus) > mcr_val = qspi_read32(priv->flags, &priv->regs->mcr); > > /* Set endianness to LE for i.mx */ > - if (IS_ENABLED(CONFIG_MX6) || IS_ENABLED(CONFIG_MX7)) > + if (IS_ENABLED(CONFIG_SOC_IMX6) || IS_ENABLED(CONFIG_MX7)) > mcr_val = QSPI_MCR_END_CFD_LE; > > qspi_write32(priv->flags, &priv->regs->mcr, > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index a71b9be5fb..f288aedcef 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -10,7 +10,7 @@ if DM_THERMAL > > config IMX_THERMAL > bool "Temperature sensor driver for Freescale i.MX SoCs" > - depends on MX6 || MX7 > + depends on SOC_IMX6 || MX7 > help > Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs. > It supports one critical trip point and one passive trip point. The > diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c > index d137bfdca0..25196a53e2 100644 > --- a/drivers/thermal/imx_thermal.c > +++ b/drivers/thermal/imx_thermal.c > @@ -46,7 +46,7 @@ struct thermal_data { > int maxc; > }; > > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > static int read_cpu_temperature(struct udevice *dev) > { > int temperature; > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index a7249b7511..f2e85bec4b 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -89,7 +89,7 @@ endif # USB_XHCI_HCD > > config USB_EHCI_HCD > bool "EHCI HCD (USB 2.0) support" > - default y if ARCH_MX5 || ARCH_MX6 > + default y if ARCH_MX5 || ARCH_IMX6 > select USB_HOST > ---help--- > The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 > @@ -125,7 +125,7 @@ config USB_EHCI_MARVELL > > config USB_EHCI_MX6 > bool "Support for i.MX6 on-chip EHCI USB controller" > - depends on ARCH_MX6 > + depends on ARCH_IMX6 > default y > ---help--- > Enables support for the on-chip EHCI controller on i.MX6 SoCs. > diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c > index 2c8fc3c4b1..5f1731023b 100644 > --- a/drivers/usb/host/ehci-mx6.c > +++ b/drivers/usb/host/ehci-mx6.c > @@ -64,7 +64,7 @@ DECLARE_GLOBAL_DATA_PTR; > #define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ > #define UCMD_RESET (1 << 1) /* controller reset */ > > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > static const unsigned phy_bases[] = { > USB_PHY0_BASE_ADDR, > USB_PHY1_BASE_ADDR, > @@ -247,7 +247,7 @@ int usb_phy_mode(int port) > > static void usb_oc_config(int index) > { > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + > USB_OTHERREGS_OFFSET); > void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]); > @@ -328,7 +328,7 @@ int ehci_mx6_common_init(struct usb_ehci *ehci, int index) > usb_power_config(index); > usb_oc_config(index); > > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > usb_internal_phy_clock_gate(index, 1); > usb_phy_enable(index, ehci); > #endif > @@ -341,7 +341,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, > struct ehci_hccr **hccr, struct ehci_hcor **hcor) > { > enum usb_init_type type; > -#if defined(CONFIG_MX6) > +#if defined(CONFIG_SOC_IMX6) > u32 controller_spacing = 0x200; > #elif defined(CONFIG_MX7) > u32 controller_spacing = 0x10000; > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index 2fc0defcd0..31c4bcaafd 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -508,7 +508,7 @@ config VIDEO > > config VIDEO_IPUV3 > bool "i.MX IPUv3 Core video support" > - depends on VIDEO && MX6 > + depends on VIDEO && SOC_IMX6 > help > This enables framebuffer driver for i.MX processors working > on the IPUv3(Image Processing Unit) internal graphic processor. > diff --git a/drivers/video/ipu_regs.h b/drivers/video/ipu_regs.h > index 0d3fe069e9..ac3502cb04 100644 > --- a/drivers/video/ipu_regs.h > +++ b/drivers/video/ipu_regs.h > @@ -39,7 +39,7 @@ > #define IPU_TPM_REG_BASE 0x01060000 > #define IPU_DC_TMPL_REG_BASE 0x01080000 > #define IPU_ISP_TBPR_REG_BASE 0x010C0000 > -#elif defined(CONFIG_MX6) > +#elif defined(CONFIG_SOC_IMX6) > #define IPU_CPMEM_REG_BASE 0x00100000 > #define IPU_LUT_REG_BASE 0x00120000 > #define IPU_SRM_REG_BASE 0x00140000 > diff --git a/env/Kconfig b/env/Kconfig > index a3c6298273..9054c084a9 100644 > --- a/env/Kconfig > +++ b/env/Kconfig > @@ -154,7 +154,7 @@ config ENV_IS_IN_MMC > depends on MMC > default y if ARCH_SUNXI > default y if ARCH_EXYNOS4 > - default y if MX6SX || MX7D > + default y if SOC_IMX6SX || MX7D > default y if TEGRA30 || TEGRA124 > default y if TEGRA_ARMV8_COMMON > help > diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h > index afc0bae167..5d6a1e9df0 100644 > --- a/include/configs/cgtqmx6eval.h > +++ b/include/configs/cgtqmx6eval.h > @@ -153,9 +153,9 @@ > "bootz; " \ > "fi;\0" \ > "findfdt="\ > - "if test $board_rev = MX6Q ; then " \ > + "if test $board_rev = i.MX6Q ; then " \ > "setenv fdtfile imx6q-qmx6.dtb; fi; " \ > - "if test $board_rev = MX6DL ; then " \ > + "if test $board_rev = i.MX6DL ; then " \ > "setenv fdtfile imx6dl-qmx6.dtb; fi; " \ > "if test $fdtfile = undefined; then " \ > "echo WARNING: Could not determine dtb to use; fi; \0" \ > diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h > index 4f36930a94..e65cc7b44b 100644 > --- a/include/configs/cm_fx6.h > +++ b/include/configs/cm_fx6.h > @@ -151,7 +151,7 @@ > "run setupnandboot;" \ > "run nandboot;\0" \ > "findfdt="\ > - "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \ > + "if test $board_name = Utilite && test $board_rev = i.MX6Q ; then " \ > "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \ > "if test $fdtfile = undefined; then " \ > "echo WARNING: Could not determine dtb to use; fi; \0" \ > diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h > index 8a0ac618e8..c9d60fdd39 100644 > --- a/include/configs/ge_bx50v3.h > +++ b/include/configs/ge_bx50v3.h > @@ -4,7 +4,7 @@ > * Copyright (C) 2014 Advantech > * Copyright (C) 2012 Freescale Semiconductor, Inc. > * > - * Configuration settings for the GE MX6Q Bx50v3 boards. > + * Configuration settings for the GE i.MX6Q Bx50v3 boards. > * > * SPDX-License-Identifier: GPL-2.0+ > */ > diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h > index 246a636ef0..be89b66e88 100644 > --- a/include/configs/imx6-engicam.h > +++ b/include/configs/imx6-engicam.h > @@ -109,7 +109,7 @@ > #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR > #define CONFIG_SYS_HZ 1000 > > -#ifdef CONFIG_MX6UL > +#ifdef CONFIG_SOC_IMX6UL > # define DRAM_OFFSET(x) 0x87##x > # define FDT_ADDR __stringify(DRAM_OFFSET(800000)) > #else > @@ -137,7 +137,7 @@ > > /* UART */ > #ifdef CONFIG_MXC_UART > -# ifdef CONFIG_MX6UL > +# ifdef CONFIG_SOC_IMX6UL > # define CONFIG_MXC_UART_BASE UART1_BASE > # else > # define CONFIG_MXC_UART_BASE UART4_BASE > diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h > index 5a062260fe..fe8d22c47d 100644 > --- a/include/configs/imx6_spl.h > +++ b/include/configs/imx6_spl.h > @@ -52,8 +52,8 @@ > # endif > #endif > > -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \ > - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#if defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6SL) || \ > + defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL) > #define CONFIG_SPL_BSS_START_ADDR 0x88200000 > #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ > #define CONFIG_SYS_SPL_MALLOC_START 0x88300000 > diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h > index 3245f001e8..d503e97fd5 100644 > --- a/include/configs/mx6_common.h > +++ b/include/configs/mx6_common.h > @@ -7,7 +7,7 @@ > #ifndef __MX6_COMMON_H > #define __MX6_COMMON_H > > -#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) > +#if (defined(CONFIG_SOC_IMX6UL) || defined(CONFIG_SOC_IMX6ULL)) > #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ > #define COUNTER_FREQUENCY CONFIG_SC_TIMER_CLK > #else > @@ -27,8 +27,8 @@ > #include <asm/arch/imx-regs.h> > #include <asm/mach-imx/gpio.h> > > -#ifndef CONFIG_MX6 > -#define CONFIG_MX6 > +#ifndef CONFIG_SOC_IMX6 > +#define CONFIG_SOC_IMX6 > #endif > > #define CONFIG_SYS_FSL_CLK > @@ -40,9 +40,9 @@ > #define CONFIG_REVISION_TAG > > /* Boot options */ > -#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ > - defined(CONFIG_MX6SX) || \ > - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) > +#if defined(CONFIG_SOC_IMX6SL) || defined(CONFIG_SOC_IMX6SLL) || \ > + defined(CONFIG_SOC_IMX6SX) || defined(CONFIG_SOC_IMX6UL) || \ > + defined(CONFIG_SOC_IMX6ULL) > #define CONFIG_LOADADDR 0x82000000 > #else > #define CONFIG_LOADADDR 0x12000000 > diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h > index 0e1d18cad8..7e99b33c96 100644 > --- a/include/configs/mx6cuboxi.h > +++ b/include/configs/mx6cuboxi.h > @@ -103,17 +103,17 @@ > "fi; " \ > "fi\0" \ > "findfdt="\ > - "if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \ > + "if test $board_name = HUMMINGBOARD2 && test $board_rev = i.MX6Q ; then " \ > "setenv fdtfile imx6q-hummingboard2.dtb; fi; " \ > - "if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \ > + "if test $board_name = HUMMINGBOARD2 && test $board_rev = i.MX6DL ; then " \ > "setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \ > - "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \ > + "if test $board_name = HUMMINGBOARD && test $board_rev = i.MX6Q ; then " \ > "setenv fdtfile imx6q-hummingboard.dtb; fi; " \ > - "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \ > + "if test $board_name = HUMMINGBOARD && test $board_rev = i.MX6DL ; then " \ > "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \ > - "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \ > + "if test $board_name = CUBOXI && test $board_rev = i.MX6Q ; then " \ > "setenv fdtfile imx6q-cubox-i.dtb; fi; " \ > - "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \ > + "if test $board_name = CUBOXI && test $board_rev = i.MX6DL ; then " \ > "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \ > "if test $fdtfile = undefined; then " \ > "echo WARNING: Could not determine dtb to use; fi; \0" \ > diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h > index 5be8ce419d..2758887c03 100644 > --- a/include/configs/mx6memcal.h > +++ b/include/configs/mx6memcal.h > @@ -26,7 +26,7 @@ > > #define CONFIG_MXC_UART > #ifdef CONFIG_SERIAL_CONSOLE_UART1 > -#if defined(CONFIG_MX6SL) > +#if defined(CONFIG_SOC_IMX6SL) > #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR > #else > #define CONFIG_MXC_UART_BASE UART1_BASE > diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h > index d976e77aef..4f707dde4e 100644 > --- a/include/configs/mx6sabre_common.h > +++ b/include/configs/mx6sabre_common.h > @@ -140,17 +140,17 @@ > "fi;\0" \ > "findfdt="\ > "if test $fdt_file = undefined; then " \ > - "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \ > + "if test $board_name = SABREAUTO && test $board_rev = i.MX6QP; then " \ > "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \ > - "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \ > + "if test $board_name = SABREAUTO && test $board_rev = i.MX6Q; then " \ > "setenv fdt_file imx6q-sabreauto.dtb; fi; " \ > - "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \ > + "if test $board_name = SABREAUTO && test $board_rev = i.MX6DL; then " \ > "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \ > - "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \ > + "if test $board_name = SABRESD && test $board_rev = i.MX6QP; then " \ > "setenv fdt_file imx6qp-sabresd.dtb; fi; " \ > - "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \ > + "if test $board_name = SABRESD && test $board_rev = i.MX6Q; then " \ > "setenv fdt_file imx6q-sabresd.dtb; fi; " \ > - "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \ > + "if test $board_name = SABRESD && test $board_rev = i.MX6DL; then " \ > "setenv fdt_file imx6dl-sabresd.dtb; fi; " \ > "if test $fdt_file = undefined; then " \ > "echo WARNING: Could not determine dtb to use; fi; " \ > diff --git a/include/configs/titanium.h b/include/configs/titanium.h > index 0fe40ee72f..f2e6bc480e 100644 > --- a/include/configs/titanium.h > +++ b/include/configs/titanium.h > @@ -15,7 +15,7 @@ > > #include "mx6_common.h" > > -#define CONFIG_MX6Q > +#define CONFIG_SOC_IMX6Q > > /* Provide the MACH_TYPE value that the vendor kernel requires. */ > #define CONFIG_MACH_TYPE 3769 > diff --git a/include/configs/udoo.h b/include/configs/udoo.h > index 989014a177..0b0ff12331 100644 > --- a/include/configs/udoo.h > +++ b/include/configs/udoo.h > @@ -124,9 +124,9 @@ > "bootz; " \ > "fi;\0" \ > "findfdt=" \ > - "if test $board_rev = MX6Q ; then " \ > + "if test $board_rev = i.MX6Q ; then " \ > "setenv fdt_file imx6q-udoo.dtb; fi; " \ > - "if test $board_rev = MX6DL ; then " \ > + "if test $board_rev = i.MX6DL ; then " \ > "setenv fdt_file imx6dl-udoo.dtb; fi; " \ > "if test $fdt_file = undefined; then " \ > "echo WARNING: Could not determine dtb to use; fi; \0" > diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h > index 487cb1f5df..36a342b9ab 100644 > --- a/include/configs/wandboard.h > +++ b/include/configs/wandboard.h > @@ -106,19 +106,19 @@ > "fi; " \ > "fi\0" \ > "findfdt="\ > - "if test $board_name = D1 && test $board_rev = MX6QP ; then " \ > + "if test $board_name = D1 && test $board_rev = i.MX6QP ; then " \ > "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \ > - "if test $board_name = D1 && test $board_rev = MX6Q ; then " \ > + "if test $board_name = D1 && test $board_rev = i.MX6Q ; then " \ > "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \ > - "if test $board_name = D1 && test $board_rev = MX6DL ; then " \ > + "if test $board_name = D1 && test $board_rev = i.MX6DL ; then " \ > "setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \ > - "if test $board_name = C1 && test $board_rev = MX6Q ; then " \ > + "if test $board_name = C1 && test $board_rev = i.MX6Q ; then " \ > "setenv fdtfile imx6q-wandboard.dtb; fi; " \ > - "if test $board_name = C1 && test $board_rev = MX6DL ; then " \ > + "if test $board_name = C1 && test $board_rev = i.MX6DL ; then " \ > "setenv fdtfile imx6dl-wandboard.dtb; fi; " \ > - "if test $board_name = B1 && test $board_rev = MX6Q ; then " \ > + "if test $board_name = B1 && test $board_rev = i.MX6Q ; then " \ > "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \ > - "if test $board_name = B1 && test $board_rev = MX6DL ; then " \ > + "if test $board_name = B1 && test $board_rev = i.MX6DL ; then " \ > "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \ > "if test $fdtfile = undefined; then " \ > "echo WARNING: Could not determine dtb to use; fi; \0" \ > diff --git a/include/fsl_sec.h b/include/fsl_sec.h > index 4cbdb2d65a..e561768961 100644 > --- a/include/fsl_sec.h > +++ b/include/fsl_sec.h > @@ -152,7 +152,7 @@ typedef struct ccsr_sec { > > struct jr_regs { > #if defined(CONFIG_SYS_FSL_SEC_LE) && \ > - !(defined(CONFIG_MX6) || defined(CONFIG_MX7)) > + !(defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > u32 irba_l; > u32 irba_h; > #else > @@ -166,7 +166,7 @@ struct jr_regs { > u32 rsvd3; > u32 irja; > #if defined(CONFIG_SYS_FSL_SEC_LE) && \ > - !(defined(CONFIG_MX6) || defined(CONFIG_MX7)) > + !(defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > u32 orba_l; > u32 orba_h; > #else > @@ -199,7 +199,7 @@ struct jr_regs { > */ > struct sg_entry { > #if defined(CONFIG_SYS_FSL_SEC_LE) && \ > - !(defined(CONFIG_MX6) || defined(CONFIG_MX7)) > + !(defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7)) > uint32_t addr_lo; /* Memory Address - lo */ > uint32_t addr_hi; /* Memory Address of start of buffer - hi */ > #else > @@ -220,7 +220,7 @@ struct sg_entry { > > #define BLOB_SIZE(x) ((x) + 32 + 16) /* Blob buffer size */ > > -#if defined(CONFIG_MX6) || defined(CONFIG_MX7) > +#if defined(CONFIG_SOC_IMX6) || defined(CONFIG_MX7) > /* Job Ring Base Address */ > #define JR_BASE_ADDR(x) (CONFIG_SYS_FSL_SEC_ADDR + 0x1000 * (x + 1)) > /* Secure Memory Offset varies accross versions */ > diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig > index fde1ac108d..6c4b86edb8 100644 > --- a/lib/rsa/Kconfig > +++ b/lib/rsa/Kconfig > @@ -1,6 +1,6 @@ > config RSA > bool "Use RSA Library" > - select RSA_FREESCALE_EXP if FSL_CAAM && !ARCH_MX7 && !ARCH_MX6 && !ARCH_MX5 > + select RSA_FREESCALE_EXP if FSL_CAAM && !ARCH_MX7 && !ARCH_IMX6 && !ARCH_MX5 > select RSA_SOFTWARE_EXP if !RSA_FREESCALE_EXP > help > RSA support. This enables the RSA algorithm used for FIT image > @@ -29,7 +29,7 @@ config RSA_SOFTWARE_EXP > > config RSA_FREESCALE_EXP > bool "Enable RSA Modular Exponentiation with FSL crypto accelerator" > - depends on DM && RSA && FSL_CAAM && !ARCH_MX7 && !ARCH_MX6 && !ARCH_MX5 > + depends on DM && RSA && FSL_CAAM && !ARCH_MX7 && !ARCH_IMX6 && !ARCH_MX5 > help > Enables driver for RSA modular exponentiation using Freescale cryptographic > accelerator - CAAM. > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures 2018-03-26 12:16 ` [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures Jagan Teki 2018-03-26 12:37 ` Stefano Babic @ 2018-03-26 12:39 ` Stefano Babic 2018-03-29 7:27 ` Jagan Teki 1 sibling, 1 reply; 10+ messages in thread From: Stefano Babic @ 2018-03-26 12:39 UTC (permalink / raw) To: u-boot Hi Jagan, sorry, I see patch is already V3, I have missed the previous ones. Anyway: On 26/03/2018 14:16, Jagan Teki wrote: > ARCH_MX6 -> ARCH_IMX6 > MX6 -> SOC_IMX6 > MX6D -> SOC_IMX6D > MX6DL -> SOC_IMX6DL > MX6Q -> SOC_IMX6Q > MX6S -> SOC_IMX6S I do not understand which is the added value for this patchset, except that it could potentially break many boards. I can understand if there would be a name conflict with some other SOCs, but there is not. Why should we soo in this way ? > MX6SL -> SOC_IMX6SL > MX6Sx -> SOC_IMX6SX > MX6SLL -> SOC_IMX6SLL > MX6UL -> SOC_IMX6UL > MX6UL_LITESOM -> SOC_IMX6UL_LITESOM > MX6UL_OPOS6UL -> SOC_IMX6UL_OPOS6UL Well, and this is completely wrong. LITESOM is a SOM, not a SOC. So to be honest, we should have the hierarchy SOC (MX6UL) ==> SOM (LITESOM). But we have already, because both MX6UL and MX6UL_LITESOM are defined. IMHO this change would like to clean up, but it adds more confusion. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures 2018-03-26 12:39 ` Stefano Babic @ 2018-03-29 7:27 ` Jagan Teki 0 siblings, 0 replies; 10+ messages in thread From: Jagan Teki @ 2018-03-29 7:27 UTC (permalink / raw) To: u-boot Hi Stefano, On Mon, Mar 26, 2018 at 6:09 PM, Stefano Babic <sbabic@denx.de> wrote: > Hi Jagan, > > sorry, I see patch is already V3, I have missed the previous ones. Anyway: > > On 26/03/2018 14:16, Jagan Teki wrote: >> ARCH_MX6 -> ARCH_IMX6 >> MX6 -> SOC_IMX6 >> MX6D -> SOC_IMX6D >> MX6DL -> SOC_IMX6DL >> MX6Q -> SOC_IMX6Q >> MX6S -> SOC_IMX6S > > > I do not understand which is the added value for this patchset, except > that it could potentially break many boards. I can understand if there > would be a name conflict with some other SOCs, but there is not. For me CONFIG_MX6 doesn't look like SOC macro, until if we specify SOC on it, and rest of architectures do follow the same and if you see Linux about naming convention on imx6 this change way to sync that. If we follow better naming and able to sync other arch along with Linux and make no confusion with user, this change can applicable? > > Why should we soo in this way ? > >> MX6SL -> SOC_IMX6SL >> MX6Sx -> SOC_IMX6SX >> MX6SLL -> SOC_IMX6SLL >> MX6UL -> SOC_IMX6UL >> MX6UL_LITESOM -> SOC_IMX6UL_LITESOM >> MX6UL_OPOS6UL -> SOC_IMX6UL_OPOS6UL > > Well, and this is completely wrong. LITESOM is a SOM, not a SOC. So to > be honest, we should have the hierarchy SOC (MX6UL) ==> SOM (LITESOM). > But we have already, because both MX6UL and MX6UL_LITESOM are defined. > > IMHO this change would like to clean up, but it adds more confusion. If your OK, I will split this change and send separate patches. Jagan. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 2/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl 2018-03-26 12:16 [U-Boot] [PATCH v3 0/5] ARM: i.MX6: Add proper CONFIG names Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures Jagan Teki @ 2018-03-26 12:16 ` Jagan Teki 2018-03-27 6:32 ` Lothar Waßmann 2018-03-26 12:16 ` [U-Boot] [PATCH v3 3/5] ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi Jagan Teki ` (2 subsequent siblings) 4 siblings, 1 reply; 10+ messages in thread From: Jagan Teki @ 2018-03-26 12:16 UTC (permalink / raw) To: u-boot u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6QDL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi | 11 +++++++++++ arch/arm/dts/imx6dl-icore-mipi.dts | 1 - arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi | 7 +++++++ arch/arm/dts/imx6dl-icore-u-boot.dtsi | 7 +++++++ arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi | 11 +++++++++++ arch/arm/dts/imx6q-icore-mipi.dts | 1 - arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi | 7 +++++++ arch/arm/dts/imx6q-icore-u-boot.dtsi | 7 +++++++ arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi | 23 +++++++++++++++++++++++ arch/arm/dts/imx6qdl-icore-rqs.dtsi | 4 ---- arch/arm/dts/imx6qdl-icore-u-boot.dtsi | 19 +++++++++++++++++++ arch/arm/dts/imx6qdl-icore.dtsi | 3 --- arch/arm/dts/imx6qdl-u-boot.dtsi | 27 +++++++++++++++++++++++++++ arch/arm/dts/imx6qdl.dtsi | 5 ----- board/engicam/imx6q/MAINTAINERS | 11 ++++++++++- 15 files changed, 129 insertions(+), 15 deletions(-) create mode 100644 arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-icore-u-boot.dtsi create mode 100644 arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi create mode 100644 arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi create mode 100644 arch/arm/dts/imx6q-icore-u-boot.dtsi create mode 100644 arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi create mode 100644 arch/arm/dts/imx6qdl-icore-u-boot.dtsi create mode 100644 arch/arm/dts/imx6qdl-u-boot.dtsi diff --git a/arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi b/arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi new file mode 100644 index 0000000000..86e8da761d --- /dev/null +++ b/arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi @@ -0,0 +1,11 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-icore-u-boot.dtsi" + +&usdhc3 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx6dl-icore-mipi.dts b/arch/arm/dts/imx6dl-icore-mipi.dts index 3a444c0d98..39bdf2d55b 100644 --- a/arch/arm/dts/imx6dl-icore-mipi.dts +++ b/arch/arm/dts/imx6dl-icore-mipi.dts @@ -16,6 +16,5 @@ }; &usdhc3 { - u-boot,dm-spl; status = "okay"; }; diff --git a/arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi b/arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi new file mode 100644 index 0000000000..210b930264 --- /dev/null +++ b/arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi @@ -0,0 +1,7 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-icore-rqs-u-boot.dtsi" diff --git a/arch/arm/dts/imx6dl-icore-u-boot.dtsi b/arch/arm/dts/imx6dl-icore-u-boot.dtsi new file mode 100644 index 0000000000..5bd3df96f5 --- /dev/null +++ b/arch/arm/dts/imx6dl-icore-u-boot.dtsi @@ -0,0 +1,7 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-icore-u-boot.dtsi" diff --git a/arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi b/arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi new file mode 100644 index 0000000000..86e8da761d --- /dev/null +++ b/arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi @@ -0,0 +1,11 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-icore-u-boot.dtsi" + +&usdhc3 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx6q-icore-mipi.dts b/arch/arm/dts/imx6q-icore-mipi.dts index 527f52c886..e7c5616a63 100644 --- a/arch/arm/dts/imx6q-icore-mipi.dts +++ b/arch/arm/dts/imx6q-icore-mipi.dts @@ -16,6 +16,5 @@ }; &usdhc3 { - u-boot,dm-spl; status = "okay"; }; diff --git a/arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi b/arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi new file mode 100644 index 0000000000..210b930264 --- /dev/null +++ b/arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi @@ -0,0 +1,7 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-icore-rqs-u-boot.dtsi" diff --git a/arch/arm/dts/imx6q-icore-u-boot.dtsi b/arch/arm/dts/imx6q-icore-u-boot.dtsi new file mode 100644 index 0000000000..5bd3df96f5 --- /dev/null +++ b/arch/arm/dts/imx6q-icore-u-boot.dtsi @@ -0,0 +1,7 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-icore-u-boot.dtsi" diff --git a/arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi b/arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi new file mode 100644 index 0000000000..458debfbab --- /dev/null +++ b/arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-u-boot.dtsi" + +&usdhc3 { + u-boot,dm-spl; +}; + +&usdhc4 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc4 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi index 4f7f10203d..d797a034f7 100644 --- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi @@ -105,7 +105,6 @@ }; &usdhc3 { - u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -114,7 +113,6 @@ }; &usdhc4 { - u-boot,dm-spl; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc4>; pinctrl-1 = <&pinctrl_usdhc4_100mhz>; @@ -176,7 +174,6 @@ }; pinctrl_usdhc3: usdhc3grp { - u-boot,dm-spl; fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070 @@ -188,7 +185,6 @@ }; pinctrl_usdhc4: usdhc4grp { - u-boot,dm-spl; fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17070 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10070 diff --git a/arch/arm/dts/imx6qdl-icore-u-boot.dtsi b/arch/arm/dts/imx6qdl-icore-u-boot.dtsi new file mode 100644 index 0000000000..d45c20b10c --- /dev/null +++ b/arch/arm/dts/imx6qdl-icore-u-boot.dtsi @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-u-boot.dtsi" + +&usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx6qdl-icore.dtsi b/arch/arm/dts/imx6qdl-icore.dtsi index 913dc99c54..5eccda800d 100644 --- a/arch/arm/dts/imx6qdl-icore.dtsi +++ b/arch/arm/dts/imx6qdl-icore.dtsi @@ -122,7 +122,6 @@ }; &usdhc1 { - u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -221,7 +220,6 @@ }; pinctrl_usdhc1: usdhc1grp { - u-boot,dm-spl; fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10070 @@ -233,7 +231,6 @@ }; pinctrl_usdhc3: usdhc3grp { - u-boot,dm-spl; fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 diff --git a/arch/arm/dts/imx6qdl-u-boot.dtsi b/arch/arm/dts/imx6qdl-u-boot.dtsi new file mode 100644 index 0000000000..e6363aa1c1 --- /dev/null +++ b/arch/arm/dts/imx6qdl-u-boot.dtsi @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + soc { + u-boot,dm-spl; + + aips-bus at 02000000 { + u-boot,dm-spl; + }; + + aips-bus at 02100000 { + u-boot,dm-spl; + }; + }; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi index e04b57089a..b13b0b2db8 100644 --- a/arch/arm/dts/imx6qdl.dtsi +++ b/arch/arm/dts/imx6qdl.dtsi @@ -77,7 +77,6 @@ compatible = "simple-bus"; interrupt-parent = <&gpc>; ranges; - u-boot,dm-spl; dma_apbh: dma-apbh at 00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; @@ -226,7 +225,6 @@ #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - u-boot,dm-spl; spba-bus at 02000000 { compatible = "fsl,spba-bus", "simple-bus"; @@ -518,7 +516,6 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - u-boot,dm-spl; }; gpio2: gpio at 020a0000 { @@ -808,7 +805,6 @@ iomuxc: iomuxc at 020e0000 { compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; - u-boot,dm-spl; }; ldb: ldb at 020e0008 { @@ -893,7 +889,6 @@ #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - u-boot,dm-spl; crypto: caam at 2100000 { compatible = "fsl,sec-v4.0"; diff --git a/board/engicam/imx6q/MAINTAINERS b/board/engicam/imx6q/MAINTAINERS index 71f794586f..eb6f8adf6b 100644 --- a/board/engicam/imx6q/MAINTAINERS +++ b/board/engicam/imx6q/MAINTAINERS @@ -9,12 +9,21 @@ F: configs/imx6dl_icore_nand_defconfig F: configs/imx6qdl_icore_rqs_defconfig F: configs/imx6qdl_icore_mipi_defconfig F: configs/imx6qdl_icore_nand_defconfig +F: arch/arm/dts/imx6qdl.dtsi +F: arch/arm/dts/imx6qdl-u-boot.dtsi F: arch/arm/dts/imx6qdl-icore.dtsi +F: arch/arm/dts/imx6qdl-icore-u-boot.dtsi F: arch/arm/dts/imx6q-icore.dts +F: arch/arm/dts/imx6q-icore-u-boot.dtsi F: arch/arm/dts/imx6dl-icore.dts +F: arch/arm/dts/imx6dl-icore-u-boot.dtsi F: arch/arm/dts/imx6qdl-icore-rqs.dtsi +F: arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi F: arch/arm/dts/imx6q-icore-rqs.dts +F: arch/arm/dts/imx6q-icore-rqs-u-boot.dtis F: arch/arm/dts/imx6dl-icore-rqs.dts +F: arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi F: arch/arm/dts/imx6dl-icore-mipi.dts +F: arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi F: arch/arm/dts/imx6q-icore-mipi.dts -F: arch/arm/dts/imx6qdl-icore.dtsi +F: arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi -- 2.14.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 2/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl 2018-03-26 12:16 ` [U-Boot] [PATCH v3 2/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl Jagan Teki @ 2018-03-27 6:32 ` Lothar Waßmann 0 siblings, 0 replies; 10+ messages in thread From: Lothar Waßmann @ 2018-03-27 6:32 UTC (permalink / raw) To: u-boot Hi, On Mon, 26 Mar 2018 17:46:52 +0530 Jagan Teki wrote: > u-boot,dm-spl property is specific to U-Boot, so move it into > *u-boot.dtsi files for relevant i.MX6QDL files. > > This make syncing Linux dts files straight forward. > > Also update the MAINTAINERS file for dts files. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi | 11 +++++++++++ > arch/arm/dts/imx6dl-icore-mipi.dts | 1 - > arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi | 7 +++++++ > arch/arm/dts/imx6dl-icore-u-boot.dtsi | 7 +++++++ > arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi | 11 +++++++++++ > arch/arm/dts/imx6q-icore-mipi.dts | 1 - > arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi | 7 +++++++ > arch/arm/dts/imx6q-icore-u-boot.dtsi | 7 +++++++ > arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi | 23 +++++++++++++++++++++++ > arch/arm/dts/imx6qdl-icore-rqs.dtsi | 4 ---- > arch/arm/dts/imx6qdl-icore-u-boot.dtsi | 19 +++++++++++++++++++ > arch/arm/dts/imx6qdl-icore.dtsi | 3 --- > arch/arm/dts/imx6qdl-u-boot.dtsi | 27 +++++++++++++++++++++++++++ > arch/arm/dts/imx6qdl.dtsi | 5 ----- > board/engicam/imx6q/MAINTAINERS | 11 ++++++++++- > 15 files changed, 129 insertions(+), 15 deletions(-) > create mode 100644 arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6dl-icore-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6q-icore-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6qdl-icore-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6qdl-u-boot.dtsi > [...] > diff --git a/board/engicam/imx6q/MAINTAINERS b/board/engicam/imx6q/MAINTAINERS > index 71f794586f..eb6f8adf6b 100644 > --- a/board/engicam/imx6q/MAINTAINERS > +++ b/board/engicam/imx6q/MAINTAINERS > @@ -9,12 +9,21 @@ F: configs/imx6dl_icore_nand_defconfig > F: configs/imx6qdl_icore_rqs_defconfig > F: configs/imx6qdl_icore_mipi_defconfig > F: configs/imx6qdl_icore_nand_defconfig > +F: arch/arm/dts/imx6qdl.dtsi > +F: arch/arm/dts/imx6qdl-u-boot.dtsi > F: arch/arm/dts/imx6qdl-icore.dtsi > +F: arch/arm/dts/imx6qdl-icore-u-boot.dtsi > F: arch/arm/dts/imx6q-icore.dts > +F: arch/arm/dts/imx6q-icore-u-boot.dtsi > F: arch/arm/dts/imx6dl-icore.dts > +F: arch/arm/dts/imx6dl-icore-u-boot.dtsi > F: arch/arm/dts/imx6qdl-icore-rqs.dtsi > +F: arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi > F: arch/arm/dts/imx6q-icore-rqs.dts > +F: arch/arm/dts/imx6q-icore-rqs-u-boot.dtis > s/dtis/dtsi/ Lothar Waßmann ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 3/5] ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi 2018-03-26 12:16 [U-Boot] [PATCH v3 0/5] ARM: i.MX6: Add proper CONFIG names Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 2/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl Jagan Teki @ 2018-03-26 12:16 ` Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 4/5] ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 5/5] ARM: i.MX6: dts: Build dtb based on SOC type Jagan Teki 4 siblings, 0 replies; 10+ messages in thread From: Jagan Teki @ 2018-03-26 12:16 UTC (permalink / raw) To: u-boot Move usdhc2 node along with pinctrl to imx6ul-isiot.dts from imx6ul-isiot-emmc.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/dts/imx6ul-isiot-emmc.dts | 24 ------------------------ arch/arm/dts/imx6ul-isiot.dtsi | 26 ++++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 24 deletions(-) diff --git a/arch/arm/dts/imx6ul-isiot-emmc.dts b/arch/arm/dts/imx6ul-isiot-emmc.dts index a611e3bba5..588bebac47 100644 --- a/arch/arm/dts/imx6ul-isiot-emmc.dts +++ b/arch/arm/dts/imx6ul-isiot-emmc.dts @@ -51,29 +51,5 @@ &usdhc2 { u-boot,dm-spl; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - bus-width = <8>; - no-1-8-v; status = "okay"; }; - -&iomuxc { - pinctrl_usdhc2: usdhc2grp { - u-boot,dm-spl; - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 - MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 - MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 - MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 - MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 - MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 - >; - }; -}; diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi index 5007a88f45..e645c1265f 100644 --- a/arch/arm/dts/imx6ul-isiot.dtsi +++ b/arch/arm/dts/imx6ul-isiot.dtsi @@ -91,6 +91,15 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; + bus-width = <8>; + no-1-8-v; + status = "disabled"; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < @@ -139,4 +148,21 @@ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 >; }; + + pinctrl_usdhc2: usdhc2grp { + u-boot,dm-spl; + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 + >; + }; }; -- 2.14.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 4/5] ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl 2018-03-26 12:16 [U-Boot] [PATCH v3 0/5] ARM: i.MX6: Add proper CONFIG names Jagan Teki ` (2 preceding siblings ...) 2018-03-26 12:16 ` [U-Boot] [PATCH v3 3/5] ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi Jagan Teki @ 2018-03-26 12:16 ` Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 5/5] ARM: i.MX6: dts: Build dtb based on SOC type Jagan Teki 4 siblings, 0 replies; 10+ messages in thread From: Jagan Teki @ 2018-03-26 12:16 UTC (permalink / raw) To: u-boot u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6UL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi | 25 ++++++++++++++++++++++++ arch/arm/dts/imx6ul-geam-kit.dts | 4 ---- arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi | 11 +++++++++++ arch/arm/dts/imx6ul-isiot-emmc.dts | 1 + arch/arm/dts/imx6ul-isiot-nand.dts | 1 + arch/arm/dts/imx6ul-isiot-u-boot.dtsi | 19 ++++++++++++++++++ arch/arm/dts/imx6ul-isiot.dtsi | 3 --- arch/arm/dts/imx6ul-u-boot.dtsi | 31 ++++++++++++++++++++++++++++++ arch/arm/dts/imx6ul.dtsi | 6 ------ board/engicam/imx6ul/MAINTAINERS | 5 +++++ 10 files changed, 93 insertions(+), 13 deletions(-) create mode 100644 arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-isiot-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-u-boot.dtsi diff --git a/arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi b/arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi new file mode 100644 index 0000000000..d1b77ba295 --- /dev/null +++ b/arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6ul-u-boot.dtsi" + +&usdhc1 { + u-boot,dm-spl; +}; + +&iomuxc { + pinctrl_usdhc1: usdhc1grp { + u-boot,dm-spl; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + u-boot,dm-spl; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + u-boot,dm-spl; + }; +}; diff --git a/arch/arm/dts/imx6ul-geam-kit.dts b/arch/arm/dts/imx6ul-geam-kit.dts index 15e3f94153..07c21cb0a2 100644 --- a/arch/arm/dts/imx6ul-geam-kit.dts +++ b/arch/arm/dts/imx6ul-geam-kit.dts @@ -87,7 +87,6 @@ }; &usdhc1 { - u-boot,dm-spl; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -135,7 +134,6 @@ }; pinctrl_usdhc1: usdhc1grp { - u-boot,dm-spl; fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 @@ -147,7 +145,6 @@ }; pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - u-boot,dm-spl; fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -159,7 +156,6 @@ }; pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - u-boot,dm-spl; fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi b/arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi new file mode 100644 index 0000000000..7d0cc154cf --- /dev/null +++ b/arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi @@ -0,0 +1,11 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6ul-isiot-u-boot.dtsi" + +&usdhc2 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx6ul-isiot-emmc.dts b/arch/arm/dts/imx6ul-isiot-emmc.dts index 588bebac47..50ce2d798e 100644 --- a/arch/arm/dts/imx6ul-isiot-emmc.dts +++ b/arch/arm/dts/imx6ul-isiot-emmc.dts @@ -42,6 +42,7 @@ /dts-v1/; +#include "imx6ul.dtsi" #include "imx6ul-isiot.dtsi" / { diff --git a/arch/arm/dts/imx6ul-isiot-nand.dts b/arch/arm/dts/imx6ul-isiot-nand.dts index 12a3528428..ffdaf34efb 100644 --- a/arch/arm/dts/imx6ul-isiot-nand.dts +++ b/arch/arm/dts/imx6ul-isiot-nand.dts @@ -42,6 +42,7 @@ /dts-v1/; +#include "imx6ul.dtsi" #include "imx6ul-isiot.dtsi" / { diff --git a/arch/arm/dts/imx6ul-isiot-u-boot.dtsi b/arch/arm/dts/imx6ul-isiot-u-boot.dtsi new file mode 100644 index 0000000000..f98c395747 --- /dev/null +++ b/arch/arm/dts/imx6ul-isiot-u-boot.dtsi @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6ul-u-boot.dtsi" + +&usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi index e645c1265f..4ed7313683 100644 --- a/arch/arm/dts/imx6ul-isiot.dtsi +++ b/arch/arm/dts/imx6ul-isiot.dtsi @@ -42,7 +42,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include "imx6ul.dtsi" / { memory { @@ -82,7 +81,6 @@ }; &usdhc1 { - u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; @@ -138,7 +136,6 @@ }; pinctrl_usdhc1: usdhc1grp { - u-boot,dm-spl; fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 diff --git a/arch/arm/dts/imx6ul-u-boot.dtsi b/arch/arm/dts/imx6ul-u-boot.dtsi new file mode 100644 index 0000000000..08d7747e1c --- /dev/null +++ b/arch/arm/dts/imx6ul-u-boot.dtsi @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + soc { + u-boot,dm-spl; + }; +}; + +&aips1 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&aips2 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi index 7affab866f..def5f8cac9 100644 --- a/arch/arm/dts/imx6ul.dtsi +++ b/arch/arm/dts/imx6ul.dtsi @@ -134,7 +134,6 @@ compatible = "simple-bus"; interrupt-parent = <&gpc>; ranges; - u-boot,dm-spl; pmu { compatible = "arm,cortex-a7-pmu"; @@ -186,7 +185,6 @@ #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - u-boot,dm-spl; spba-bus at 02000000 { compatible = "fsl,spba-bus", "simple-bus"; @@ -417,7 +415,6 @@ #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 23 10>, <&iomuxc 10 17 6>, <&iomuxc 16 33 16>; - u-boot,dm-spl; }; gpio2: gpio at 020a0000 { @@ -454,7 +451,6 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>; - u-boot,dm-spl; }; gpio5: gpio at 020ac000 { @@ -653,7 +649,6 @@ iomuxc: iomuxc at 020e0000 { compatible = "fsl,imx6ul-iomuxc"; reg = <0x020e0000 0x4000>; - u-boot,dm-spl; }; gpr: iomuxc-gpr at 020e4000 { @@ -734,7 +729,6 @@ #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - u-boot,dm-spl; usbotg1: usb at 02184000 { compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; diff --git a/board/engicam/imx6ul/MAINTAINERS b/board/engicam/imx6ul/MAINTAINERS index 73dbec88e2..88db309aec 100644 --- a/board/engicam/imx6ul/MAINTAINERS +++ b/board/engicam/imx6ul/MAINTAINERS @@ -8,7 +8,12 @@ F: configs/imx6ul_geam_nand_defconfig F: configs/imx6ul_isiot_emmc_defconfig F: configs/imx6ul_isiot_mmc_defconfig F: configs/imx6ul_isiot_nand_defconfig +F: arch/arm/dts/imx6ul.dtsi +F: arch/arm/dts/imx6ul-u-boot.dtsi F: arch/arm/dts/imx6ul-geam-kit.dts +F: arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi F: arch/arm/dts/imx6ul-isiot.dtsi +F: arch/arm/dts/imx6ul-isiot-u-boot.dtsi F: arch/arm/dts/imx6ul-isiot-emmc.dts +F: arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi F: arch/arm/dts/imx6ul-isiot-nand.dts -- 2.14.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 5/5] ARM: i.MX6: dts: Build dtb based on SOC type 2018-03-26 12:16 [U-Boot] [PATCH v3 0/5] ARM: i.MX6: Add proper CONFIG names Jagan Teki ` (3 preceding siblings ...) 2018-03-26 12:16 ` [U-Boot] [PATCH v3 4/5] ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl Jagan Teki @ 2018-03-26 12:16 ` Jagan Teki 4 siblings, 0 replies; 10+ messages in thread From: Jagan Teki @ 2018-03-26 12:16 UTC (permalink / raw) To: u-boot Now, we have proper CONFIG_SOC_ names for i.MX6 SOC types, so use the same for building dtbs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/dts/Makefile | 44 ++++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 18 deletions(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7a5f0a36a3..e03ad0427c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -385,24 +385,6 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb -dtb-$(CONFIG_SOC_IMX6) += imx6ull-14x14-evk.dtb \ - imx6sl-evk.dtb \ - imx6sll-evk.dtb \ - imx6dl-icore.dtb \ - imx6dl-icore-mipi.dtb \ - imx6dl-icore-rqs.dtb \ - imx6q-cm-fx6.dtb \ - imx6q-icore.dtb \ - imx6q-icore-mipi.dtb \ - imx6q-icore-rqs.dtb \ - imx6q-logicpd.dtb \ - imx6sx-sabreauto.dtb \ - imx6sx-sdb.dtb \ - imx6ul-geam-kit.dtb \ - imx6ul-isiot-emmc.dtb \ - imx6ul-isiot-nand.dtb \ - imx6ul-opos6uldev.dtb - dtb-$(CONFIG_MX7) += imx7-colibri.dtb \ imx7d-sdb.dtb @@ -417,6 +399,32 @@ dtb-$(CONFIG_RCAR_GEN3) += \ r8a77970-eagle.dtb \ r8a77995-draak.dtb +dtb-$(CONFIG_SOC_IMX6QDL) += \ + imx6dl-icore.dtb \ + imx6dl-icore-mipi.dtb \ + imx6dl-icore-rqs.dtb \ + imx6q-cm-fx6.dtb \ + imx6q-icore.dtb \ + imx6q-icore-mipi.dtb \ + imx6q-icore-rqs.dtb \ + imx6q-logicpd.dtb + +dtb-$(CONFIG_SOC_IMX6SL) += imx6sl-evk.dtb + +dtb-$(CONFIG_SOC_IMX6SL) += imx6sll-evk.dtb + +dtb-$(CONFIG_SOC_IMX6SX) += \ + imx6sx-sabreauto.dtb \ + imx6sx-sdb.dtb + +dtb-$(CONFIG_SOC_IMX6UL) += \ + imx6ul-geam-kit.dtb \ + imx6ul-isiot-emmc.dtb \ + imx6ul-isiot-nand.dtb \ + imx6ul-opos6uldev.dtb + +dtb-$(CONFIG_SOC_IMX6ULL) += imx6ull-14x14-evk.dtb + dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ keystone-k2e-evm.dtb \ -- 2.14.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-03-29 7:27 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-03-26 12:16 [U-Boot] [PATCH v3 0/5] ARM: i.MX6: Add proper CONFIG names Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures Jagan Teki 2018-03-26 12:37 ` Stefano Babic 2018-03-26 12:39 ` Stefano Babic 2018-03-29 7:27 ` Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 2/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl Jagan Teki 2018-03-27 6:32 ` Lothar Waßmann 2018-03-26 12:16 ` [U-Boot] [PATCH v3 3/5] ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 4/5] ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl Jagan Teki 2018-03-26 12:16 ` [U-Boot] [PATCH v3 5/5] ARM: i.MX6: dts: Build dtb based on SOC type Jagan Teki
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.