From: Sergey Suloev <ssuloev@orpaltech.com>
To: Mark Brown <broonie@kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>
Cc: linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Sergey Suloev <ssuloev@orpaltech.com>
Subject: [PATCH 6/6] spi: sun4i: add DMA transfers support
Date: Thu, 29 Mar 2018 21:59:07 +0300 [thread overview]
Message-ID: <20180329185907.27281-7-ssuloev@orpaltech.com> (raw)
In-Reply-To: <20180329185907.27281-1-ssuloev@orpaltech.com>
DMA transfers are now available for sun4i-family SoCs.
The DMA mode is used automatically as soon as requested
transfer length is more than FIFO length.
Signed-off-by: Sergey Suloev <ssuloev@orpaltech.com>
---
drivers/spi/spi-sun4i.c | 291 ++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 271 insertions(+), 20 deletions(-)
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index fc913d4..9928af7 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -14,6 +14,8 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -39,6 +41,7 @@
#define SUN4I_CTL_CPHA BIT(2)
#define SUN4I_CTL_CPOL BIT(3)
#define SUN4I_CTL_CS_ACTIVE_LOW BIT(4)
+#define SUN4I_CTL_DMA_DEDICATED BIT(5)
#define SUN4I_CTL_LMTF BIT(6)
#define SUN4I_CTL_TF_RST BIT(8)
#define SUN4I_CTL_RF_RST BIT(9)
@@ -58,6 +61,8 @@
#define SUN4I_INT_STA_REG 0x10
#define SUN4I_DMA_CTL_REG 0x14
+#define SUN4I_CTL_DMA_RF_READY BIT(0)
+#define SUN4I_CTL_DMA_TF_NOT_FULL BIT(10)
#define SUN4I_WAIT_REG 0x18
@@ -169,6 +174,13 @@ static inline void sun4i_spi_fill_fifo(struct sun4i_spi *sspi, int len)
}
}
+static bool sun4i_spi_can_dma(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ return tfr->len > SUN4I_FIFO_DEPTH;
+}
+
static void sun4i_spi_set_cs(struct spi_device *spi, bool enable)
{
struct sun4i_spi *sspi = spi_master_get_devdata(spi->master);
@@ -208,6 +220,11 @@ static void sun4i_spi_set_cs(struct spi_device *spi, bool enable)
static size_t sun4i_spi_max_transfer_size(struct spi_device *spi)
{
+ struct spi_master *master = spi->master;
+
+ if (master->can_dma)
+ return SUN4I_MAX_XFER_SIZE;
+
return SUN4I_FIFO_DEPTH;
}
@@ -235,6 +252,160 @@ static int sun4i_spi_wait_for_transfer(struct spi_device *spi,
return 0;
}
+static void sun4i_spi_dma_callback(void *param)
+{
+ struct spi_master *master = param;
+
+ dev_dbg(&master->dev, "DMA transfer complete\n");
+ spi_finalize_current_transfer(master);
+}
+
+static int sun4i_spi_dmap_prep_tx(struct spi_master *master,
+ struct spi_transfer *tfr,
+ dma_cookie_t *cookie)
+{
+ struct dma_async_tx_descriptor *chan_desc = NULL;
+
+ chan_desc = dmaengine_prep_slave_sg(master->dma_tx,
+ tfr->tx_sg.sgl, tfr->tx_sg.nents,
+ DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!chan_desc) {
+ dev_err(&master->dev,
+ "Couldn't prepare TX DMA slave\n");
+ return -EIO;
+ }
+
+ chan_desc->callback = sun4i_spi_dma_callback;
+ chan_desc->callback_param = master;
+
+ *cookie = dmaengine_submit(chan_desc);
+ dma_async_issue_pending(master->dma_tx);
+
+ return 0;
+}
+
+static int sun4i_spi_dmap_prep_rx(struct spi_master *master,
+ struct spi_transfer *tfr,
+ dma_cookie_t *cookie)
+{
+ struct dma_async_tx_descriptor *chan_desc = NULL;
+
+ chan_desc = dmaengine_prep_slave_sg(master->dma_rx,
+ tfr->rx_sg.sgl, tfr->rx_sg.nents,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!chan_desc) {
+ dev_err(&master->dev,
+ "Couldn't prepare RX DMA slave\n");
+ return -EIO;
+ }
+
+ chan_desc->callback = sun4i_spi_dma_callback;
+ chan_desc->callback_param = master;
+
+ *cookie = dmaengine_submit(chan_desc);
+ dma_async_issue_pending(master->dma_rx);
+
+ return 0;
+}
+
+static int sun4i_spi_transfer_one_dma(struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct spi_master *master = spi->master;
+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
+ dma_cookie_t tx_cookie = 0, rx_cookie = 0;
+ enum dma_status status;
+ int ret;
+ u32 reg = 0;
+
+ dev_dbg(&master->dev, "Using DMA mode for transfer\n");
+
+ if (sspi->tx_buf) {
+ ret = sun4i_spi_dmap_prep_tx(master, tfr, &tx_cookie);
+ if (ret)
+ goto out;
+
+ reg |= SUN4I_CTL_DMA_TF_NOT_FULL;
+ }
+
+ if (sspi->rx_buf) {
+ ret = sun4i_spi_dmap_prep_rx(master, tfr, &rx_cookie);
+ if (ret)
+ goto out;
+
+ reg |= SUN4I_CTL_DMA_RF_READY;
+ }
+
+ sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG, reg);
+
+ /* Dedicated DMA requests */
+ sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_DMA_DEDICATED);
+
+ /* Start transfer */
+ sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_XCH);
+
+ /* Wait for completion */
+ ret = sun4i_spi_wait_for_transfer(spi, tfr);
+ if (ret)
+ goto out;
+
+ if (sspi->tx_buf && (status = dma_async_is_tx_complete(master->dma_tx,
+ tx_cookie, NULL, NULL))) {
+ dev_warn(&master->dev,
+ "DMA returned completion status of: %s\n",
+ status == DMA_ERROR ? "error" : "in progress");
+ }
+ if (sspi->rx_buf && (status = dma_async_is_tx_complete(master->dma_rx,
+ rx_cookie, NULL, NULL))) {
+ dev_warn(&master->dev,
+ "DMA returned completion status of: %s\n",
+ status == DMA_ERROR ? "error" : "in progress");
+ }
+
+out:
+ if (ret) {
+ dev_dbg(&master->dev, "DMA channel teardown\n");
+
+ if (sspi->tx_buf)
+ dmaengine_terminate_sync(master->dma_tx);
+ if (sspi->rx_buf)
+ dmaengine_terminate_sync(master->dma_rx);
+ }
+
+ sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
+
+ return ret;
+}
+
+static int sun4i_spi_transfer_one_pio(struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct spi_master *master = spi->master;
+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
+ int ret;
+
+ /* Explicit disable DMA requests */
+ sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG, 0);
+ sun4i_spi_unset(sspi, SUN4I_CTL_REG, SUN4I_CTL_DMA_DEDICATED);
+
+ /* Fill the TX FIFO */
+ sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
+
+ /* Enable transfer complete irq */
+ sun4i_spi_set(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);
+
+ /* Start transfer */
+ sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_XCH);
+
+ ret = sun4i_spi_wait_for_transfer(spi, tfr);
+
+ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
+
+ return ret;
+}
+
static int sun4i_spi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr)
@@ -242,13 +413,22 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
struct sun4i_spi *sspi = spi_master_get_devdata(master);
unsigned int mclk_rate, div;
unsigned int tx_len = 0;
- int ret = 0;
u32 reg;
- /* We don't support transfers larger than FIFO depth */
- if (tfr->len > SUN4I_FIFO_DEPTH)
+ /* A zero length transfer never finishes if programmed
+ in the hardware */
+ if (!tfr->len)
+ return 0;
+
+ if (tfr->len > SUN4I_MAX_XFER_SIZE)
return -EMSGSIZE;
+ if (!master->can_dma) {
+ /* Don't support transfer larger than the FIFO */
+ if (tfr->len > SUN4I_FIFO_DEPTH)
+ return -EMSGSIZE;
+ }
+
sspi->tx_buf = tfr->tx_buf;
sspi->rx_buf = tfr->rx_buf;
sspi->len = tfr->len;
@@ -335,22 +515,10 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len));
sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len));
- /*
- * Fill the TX FIFO
- */
- sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
-
- /* Enable transfer complete interrupt */
- sun4i_spi_set(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);
-
- /* Start the transfer */
- sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_XCH);
-
- ret = sun4i_spi_wait_for_transfer(spi, tfr);
-
- sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
+ if (sun4i_spi_can_dma(master, spi, tfr))
+ return sun4i_spi_transfer_one_dma(spi, tfr);
- return ret;
+ return sun4i_spi_transfer_one_pio(spi, tfr);
}
static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
@@ -363,8 +531,7 @@ static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
/* Transfer complete */
if (status & SUN4I_INT_CTL_TC) {
- sun4i_spi_write(sspi, SUN4I_INT_STA_REG,
- SUN4I_INT_CTL_TC);
+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC);
sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
spi_finalize_current_transfer(master);
return IRQ_HANDLED;
@@ -413,6 +580,76 @@ static int sun4i_spi_runtime_suspend(struct device *dev)
return 0;
}
+static int sun4i_spi_dma_setup(struct device *dev,
+ struct resource *res)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct dma_slave_config dma_sconf;
+ int ret;
+
+ master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(master->dma_tx)) {
+ dev_err(dev, "Unable to acquire DMA TX channel\n");
+ ret = PTR_ERR(master->dma_tx);
+ goto out;
+ }
+
+ dma_sconf.direction = DMA_MEM_TO_DEV;
+ dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconf.dst_addr = res->start + SUN4I_TXDATA_REG;
+ dma_sconf.dst_maxburst = 1;
+ dma_sconf.src_maxburst = 1;
+
+ ret = dmaengine_slave_config(master->dma_tx, &dma_sconf);
+ if (ret) {
+ dev_err(dev, "Unable to configure DMA TX slave\n");
+ goto err_rel_tx;
+ }
+
+ master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR(master->dma_rx)) {
+ dev_err(dev, "Unable to acquire DMA RX channel\n");
+ ret = PTR_ERR(master->dma_rx);
+ goto err_rel_tx;
+ }
+
+ dma_sconf.direction = DMA_DEV_TO_MEM;
+ dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconf.src_addr = res->start + SUN4I_RXDATA_REG;
+ dma_sconf.src_maxburst = 1;
+ dma_sconf.dst_maxburst = 1;
+
+ ret = dmaengine_slave_config(master->dma_rx, &dma_sconf);
+ if (ret) {
+ dev_err(dev, "Unable to configure DMA RX slave\n");
+ goto err_rel_rx;
+ }
+
+ /* don't set can_dma unless both channels are valid*/
+ master->can_dma = sun4i_spi_can_dma;
+
+ return 0;
+
+err_rel_rx:
+ dma_release_channel(master->dma_rx);
+err_rel_tx:
+ dma_release_channel(master->dma_tx);
+out:
+ master->dma_tx = NULL;
+ master->dma_rx = NULL;
+ return ret;
+}
+
+static void sun4i_spi_dma_release(struct spi_master *master)
+{
+ if (master->can_dma) {
+ dma_release_channel(master->dma_rx);
+ dma_release_channel(master->dma_tx);
+ }
+}
+
static int sun4i_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
@@ -475,6 +712,15 @@ static int sun4i_spi_probe(struct platform_device *pdev)
goto err_free_master;
}
+ ret = sun4i_spi_dma_setup(&pdev->dev, res);
+ if (ret) {
+ if (ret == -EPROBE_DEFER) {
+ /* wait for the dma driver to load */
+ goto err_free_master;
+ }
+ dev_warn(&pdev->dev, "DMA transfer not supported\n");
+ }
+
/*
* This wake-up/shutdown pattern is to be able to have the
* device woken up, even if runtime_pm is disabled
@@ -501,14 +747,19 @@ err_pm_disable:
pm_runtime_disable(&pdev->dev);
sun4i_spi_runtime_suspend(&pdev->dev);
err_free_master:
+ sun4i_spi_dma_release(master);
spi_master_put(master);
return ret;
}
static int sun4i_spi_remove(struct platform_device *pdev)
{
+ struct spi_master *master = platform_get_drvdata(pdev);
+
pm_runtime_force_suspend(&pdev->dev);
+ sun4i_spi_dma_release(master);
+
return 0;
}
--
2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: ssuloev@orpaltech.com (Sergey Suloev)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] spi: sun4i: add DMA transfers support
Date: Thu, 29 Mar 2018 21:59:07 +0300 [thread overview]
Message-ID: <20180329185907.27281-7-ssuloev@orpaltech.com> (raw)
In-Reply-To: <20180329185907.27281-1-ssuloev@orpaltech.com>
DMA transfers are now available for sun4i-family SoCs.
The DMA mode is used automatically as soon as requested
transfer length is more than FIFO length.
Signed-off-by: Sergey Suloev <ssuloev@orpaltech.com>
---
drivers/spi/spi-sun4i.c | 291 ++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 271 insertions(+), 20 deletions(-)
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index fc913d4..9928af7 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -14,6 +14,8 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -39,6 +41,7 @@
#define SUN4I_CTL_CPHA BIT(2)
#define SUN4I_CTL_CPOL BIT(3)
#define SUN4I_CTL_CS_ACTIVE_LOW BIT(4)
+#define SUN4I_CTL_DMA_DEDICATED BIT(5)
#define SUN4I_CTL_LMTF BIT(6)
#define SUN4I_CTL_TF_RST BIT(8)
#define SUN4I_CTL_RF_RST BIT(9)
@@ -58,6 +61,8 @@
#define SUN4I_INT_STA_REG 0x10
#define SUN4I_DMA_CTL_REG 0x14
+#define SUN4I_CTL_DMA_RF_READY BIT(0)
+#define SUN4I_CTL_DMA_TF_NOT_FULL BIT(10)
#define SUN4I_WAIT_REG 0x18
@@ -169,6 +174,13 @@ static inline void sun4i_spi_fill_fifo(struct sun4i_spi *sspi, int len)
}
}
+static bool sun4i_spi_can_dma(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ return tfr->len > SUN4I_FIFO_DEPTH;
+}
+
static void sun4i_spi_set_cs(struct spi_device *spi, bool enable)
{
struct sun4i_spi *sspi = spi_master_get_devdata(spi->master);
@@ -208,6 +220,11 @@ static void sun4i_spi_set_cs(struct spi_device *spi, bool enable)
static size_t sun4i_spi_max_transfer_size(struct spi_device *spi)
{
+ struct spi_master *master = spi->master;
+
+ if (master->can_dma)
+ return SUN4I_MAX_XFER_SIZE;
+
return SUN4I_FIFO_DEPTH;
}
@@ -235,6 +252,160 @@ static int sun4i_spi_wait_for_transfer(struct spi_device *spi,
return 0;
}
+static void sun4i_spi_dma_callback(void *param)
+{
+ struct spi_master *master = param;
+
+ dev_dbg(&master->dev, "DMA transfer complete\n");
+ spi_finalize_current_transfer(master);
+}
+
+static int sun4i_spi_dmap_prep_tx(struct spi_master *master,
+ struct spi_transfer *tfr,
+ dma_cookie_t *cookie)
+{
+ struct dma_async_tx_descriptor *chan_desc = NULL;
+
+ chan_desc = dmaengine_prep_slave_sg(master->dma_tx,
+ tfr->tx_sg.sgl, tfr->tx_sg.nents,
+ DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!chan_desc) {
+ dev_err(&master->dev,
+ "Couldn't prepare TX DMA slave\n");
+ return -EIO;
+ }
+
+ chan_desc->callback = sun4i_spi_dma_callback;
+ chan_desc->callback_param = master;
+
+ *cookie = dmaengine_submit(chan_desc);
+ dma_async_issue_pending(master->dma_tx);
+
+ return 0;
+}
+
+static int sun4i_spi_dmap_prep_rx(struct spi_master *master,
+ struct spi_transfer *tfr,
+ dma_cookie_t *cookie)
+{
+ struct dma_async_tx_descriptor *chan_desc = NULL;
+
+ chan_desc = dmaengine_prep_slave_sg(master->dma_rx,
+ tfr->rx_sg.sgl, tfr->rx_sg.nents,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!chan_desc) {
+ dev_err(&master->dev,
+ "Couldn't prepare RX DMA slave\n");
+ return -EIO;
+ }
+
+ chan_desc->callback = sun4i_spi_dma_callback;
+ chan_desc->callback_param = master;
+
+ *cookie = dmaengine_submit(chan_desc);
+ dma_async_issue_pending(master->dma_rx);
+
+ return 0;
+}
+
+static int sun4i_spi_transfer_one_dma(struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct spi_master *master = spi->master;
+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
+ dma_cookie_t tx_cookie = 0, rx_cookie = 0;
+ enum dma_status status;
+ int ret;
+ u32 reg = 0;
+
+ dev_dbg(&master->dev, "Using DMA mode for transfer\n");
+
+ if (sspi->tx_buf) {
+ ret = sun4i_spi_dmap_prep_tx(master, tfr, &tx_cookie);
+ if (ret)
+ goto out;
+
+ reg |= SUN4I_CTL_DMA_TF_NOT_FULL;
+ }
+
+ if (sspi->rx_buf) {
+ ret = sun4i_spi_dmap_prep_rx(master, tfr, &rx_cookie);
+ if (ret)
+ goto out;
+
+ reg |= SUN4I_CTL_DMA_RF_READY;
+ }
+
+ sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG, reg);
+
+ /* Dedicated DMA requests */
+ sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_DMA_DEDICATED);
+
+ /* Start transfer */
+ sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_XCH);
+
+ /* Wait for completion */
+ ret = sun4i_spi_wait_for_transfer(spi, tfr);
+ if (ret)
+ goto out;
+
+ if (sspi->tx_buf && (status = dma_async_is_tx_complete(master->dma_tx,
+ tx_cookie, NULL, NULL))) {
+ dev_warn(&master->dev,
+ "DMA returned completion status of: %s\n",
+ status == DMA_ERROR ? "error" : "in progress");
+ }
+ if (sspi->rx_buf && (status = dma_async_is_tx_complete(master->dma_rx,
+ rx_cookie, NULL, NULL))) {
+ dev_warn(&master->dev,
+ "DMA returned completion status of: %s\n",
+ status == DMA_ERROR ? "error" : "in progress");
+ }
+
+out:
+ if (ret) {
+ dev_dbg(&master->dev, "DMA channel teardown\n");
+
+ if (sspi->tx_buf)
+ dmaengine_terminate_sync(master->dma_tx);
+ if (sspi->rx_buf)
+ dmaengine_terminate_sync(master->dma_rx);
+ }
+
+ sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
+
+ return ret;
+}
+
+static int sun4i_spi_transfer_one_pio(struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct spi_master *master = spi->master;
+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
+ int ret;
+
+ /* Explicit disable DMA requests */
+ sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG, 0);
+ sun4i_spi_unset(sspi, SUN4I_CTL_REG, SUN4I_CTL_DMA_DEDICATED);
+
+ /* Fill the TX FIFO */
+ sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
+
+ /* Enable transfer complete irq */
+ sun4i_spi_set(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);
+
+ /* Start transfer */
+ sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_XCH);
+
+ ret = sun4i_spi_wait_for_transfer(spi, tfr);
+
+ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
+
+ return ret;
+}
+
static int sun4i_spi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr)
@@ -242,13 +413,22 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
struct sun4i_spi *sspi = spi_master_get_devdata(master);
unsigned int mclk_rate, div;
unsigned int tx_len = 0;
- int ret = 0;
u32 reg;
- /* We don't support transfers larger than FIFO depth */
- if (tfr->len > SUN4I_FIFO_DEPTH)
+ /* A zero length transfer never finishes if programmed
+ in the hardware */
+ if (!tfr->len)
+ return 0;
+
+ if (tfr->len > SUN4I_MAX_XFER_SIZE)
return -EMSGSIZE;
+ if (!master->can_dma) {
+ /* Don't support transfer larger than the FIFO */
+ if (tfr->len > SUN4I_FIFO_DEPTH)
+ return -EMSGSIZE;
+ }
+
sspi->tx_buf = tfr->tx_buf;
sspi->rx_buf = tfr->rx_buf;
sspi->len = tfr->len;
@@ -335,22 +515,10 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len));
sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len));
- /*
- * Fill the TX FIFO
- */
- sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
-
- /* Enable transfer complete interrupt */
- sun4i_spi_set(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);
-
- /* Start the transfer */
- sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_XCH);
-
- ret = sun4i_spi_wait_for_transfer(spi, tfr);
-
- sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
+ if (sun4i_spi_can_dma(master, spi, tfr))
+ return sun4i_spi_transfer_one_dma(spi, tfr);
- return ret;
+ return sun4i_spi_transfer_one_pio(spi, tfr);
}
static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
@@ -363,8 +531,7 @@ static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
/* Transfer complete */
if (status & SUN4I_INT_CTL_TC) {
- sun4i_spi_write(sspi, SUN4I_INT_STA_REG,
- SUN4I_INT_CTL_TC);
+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC);
sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
spi_finalize_current_transfer(master);
return IRQ_HANDLED;
@@ -413,6 +580,76 @@ static int sun4i_spi_runtime_suspend(struct device *dev)
return 0;
}
+static int sun4i_spi_dma_setup(struct device *dev,
+ struct resource *res)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct dma_slave_config dma_sconf;
+ int ret;
+
+ master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(master->dma_tx)) {
+ dev_err(dev, "Unable to acquire DMA TX channel\n");
+ ret = PTR_ERR(master->dma_tx);
+ goto out;
+ }
+
+ dma_sconf.direction = DMA_MEM_TO_DEV;
+ dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconf.dst_addr = res->start + SUN4I_TXDATA_REG;
+ dma_sconf.dst_maxburst = 1;
+ dma_sconf.src_maxburst = 1;
+
+ ret = dmaengine_slave_config(master->dma_tx, &dma_sconf);
+ if (ret) {
+ dev_err(dev, "Unable to configure DMA TX slave\n");
+ goto err_rel_tx;
+ }
+
+ master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR(master->dma_rx)) {
+ dev_err(dev, "Unable to acquire DMA RX channel\n");
+ ret = PTR_ERR(master->dma_rx);
+ goto err_rel_tx;
+ }
+
+ dma_sconf.direction = DMA_DEV_TO_MEM;
+ dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconf.src_addr = res->start + SUN4I_RXDATA_REG;
+ dma_sconf.src_maxburst = 1;
+ dma_sconf.dst_maxburst = 1;
+
+ ret = dmaengine_slave_config(master->dma_rx, &dma_sconf);
+ if (ret) {
+ dev_err(dev, "Unable to configure DMA RX slave\n");
+ goto err_rel_rx;
+ }
+
+ /* don't set can_dma unless both channels are valid*/
+ master->can_dma = sun4i_spi_can_dma;
+
+ return 0;
+
+err_rel_rx:
+ dma_release_channel(master->dma_rx);
+err_rel_tx:
+ dma_release_channel(master->dma_tx);
+out:
+ master->dma_tx = NULL;
+ master->dma_rx = NULL;
+ return ret;
+}
+
+static void sun4i_spi_dma_release(struct spi_master *master)
+{
+ if (master->can_dma) {
+ dma_release_channel(master->dma_rx);
+ dma_release_channel(master->dma_tx);
+ }
+}
+
static int sun4i_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
@@ -475,6 +712,15 @@ static int sun4i_spi_probe(struct platform_device *pdev)
goto err_free_master;
}
+ ret = sun4i_spi_dma_setup(&pdev->dev, res);
+ if (ret) {
+ if (ret == -EPROBE_DEFER) {
+ /* wait for the dma driver to load */
+ goto err_free_master;
+ }
+ dev_warn(&pdev->dev, "DMA transfer not supported\n");
+ }
+
/*
* This wake-up/shutdown pattern is to be able to have the
* device woken up, even if runtime_pm is disabled
@@ -501,14 +747,19 @@ err_pm_disable:
pm_runtime_disable(&pdev->dev);
sun4i_spi_runtime_suspend(&pdev->dev);
err_free_master:
+ sun4i_spi_dma_release(master);
spi_master_put(master);
return ret;
}
static int sun4i_spi_remove(struct platform_device *pdev)
{
+ struct spi_master *master = platform_get_drvdata(pdev);
+
pm_runtime_force_suspend(&pdev->dev);
+ sun4i_spi_dma_release(master);
+
return 0;
}
--
2.16.2
next prev parent reply other threads:[~2018-03-29 18:59 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-29 18:59 [PATCH 0/6] spi: Add support for DMA transfers in sun4i SPI driver Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 1/6] spi: core: handle timeout error from transfer_one() Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 2/6] spi: sun4i: restrict transfer length in PIO-mode Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-04-03 8:10 ` Maxime Ripard
2018-04-03 8:10 ` Maxime Ripard
2018-04-03 10:26 ` Sergey Suloev
2018-04-03 10:26 ` Sergey Suloev
2018-04-03 11:08 ` Sergey Suloev
2018-04-03 11:08 ` Sergey Suloev
2018-04-03 11:08 ` Sergey Suloev
2018-04-03 11:40 ` Maxime Ripard
2018-04-03 11:40 ` Maxime Ripard
2018-04-03 12:12 ` Sergey Suloev
2018-04-03 12:12 ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 3/6] spi: sun4i: coding style/readability improvements Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 4/6] spi: sun4i: use completion provided by SPI core driver Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 5/6] spi: sun4i: introduce register set/unset helpers Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev
2018-04-03 8:14 ` Maxime Ripard
2018-04-03 8:14 ` Maxime Ripard
2018-04-03 10:27 ` Sergey Suloev
2018-04-03 10:27 ` Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev [this message]
2018-03-29 18:59 ` [PATCH 6/6] spi: sun4i: add DMA transfers support Sergey Suloev
2018-04-03 8:17 ` Maxime Ripard
2018-04-03 8:17 ` Maxime Ripard
2018-04-03 13:03 ` Sergey Suloev
2018-04-03 13:03 ` Sergey Suloev
2018-04-04 6:27 ` Maxime Ripard
2018-04-04 6:27 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180329185907.27281-7-ssuloev@orpaltech.com \
--to=ssuloev@orpaltech.com \
--cc=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=maxime.ripard@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.