From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/2] ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMU
Date: Mon, 16 Apr 2018 20:11:25 +0200 [thread overview]
Message-ID: <20180416181126.15629-1-krzk@kernel.org> (raw)
The PMU node is the actual block responsible for power management,
including typical Exynos on/off/restart procedures. Therefore the
syscon poweroff and restart nodes logically belong to it.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Previously was "Fix missing missing reg warning for syscon restart
nodes" to fix DTC warnings like:
arch/arm/boot/dts/exynos4412-trats2.dtb: Warning (simple_bus_reg):
Node /soc/syscon-poweroff missing or empty reg/ranges property
arch/arm/boot/dts/exynos4412-trats2.dtb: Warning (simple_bus_reg):
Node /soc/syscon-reboot missing or empty reg/ranges property
but this warnings are gone in v4.17-rc1 since 9130ba884640
("scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987")
---
arch/arm/boot/dts/exynos-syscon-restart.dtsi | 28 ++++++++++++----------------
arch/arm/boot/dts/exynos3250.dtsi | 2 +-
arch/arm/boot/dts/exynos4.dtsi | 3 ++-
arch/arm/boot/dts/exynos5.dtsi | 1 -
arch/arm/boot/dts/exynos5250.dtsi | 1 +
arch/arm/boot/dts/exynos5410.dtsi | 1 +
arch/arm/boot/dts/exynos5420.dtsi | 1 +
7 files changed, 18 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
index 4b3dd0549a54..ecf416690a15 100644
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -3,22 +3,18 @@
* Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
*/
-/ {
- soc {
- compatible = "simple-bus";
-
- poweroff: syscon-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&pmu_system_controller>;
- offset = <0x330C>; /* PS_HOLD_CONTROL */
- mask = <0x5200>; /* reset value */
- };
+&pmu_system_controller {
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x0400>; /* SWRESET */
- mask = <0x1>;
- };
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
};
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 0a5f989d963b..962af97c1883 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -15,7 +15,6 @@
*/
#include "exynos4-cpu-thermal.dtsi"
-#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos3250.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -919,3 +918,4 @@
};
#include "exynos3250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 909a9f2bf5be..dfe41b698745 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -20,7 +20,6 @@
#include <dt-bindings/clock/exynos-audss-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos-syscon-restart.dtsi"
/ {
interrupt-parent = <&gic>;
@@ -1025,3 +1024,5 @@
};
};
};
+
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index f8d7de1144f1..359f49bdd4e2 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -12,7 +12,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos-syscon-restart.dtsi"
/ {
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 45283a6c5eee..85bfa8909af3 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1117,3 +1117,4 @@
};
#include "exynos5250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 55509c690328..20e789ea136f 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -439,3 +439,4 @@
};
#include "exynos5410-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 2f3cb2a97f71..71e2b154a244 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1531,3 +1531,4 @@
};
#include "exynos5420-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMU
Date: Mon, 16 Apr 2018 20:11:25 +0200 [thread overview]
Message-ID: <20180416181126.15629-1-krzk@kernel.org> (raw)
The PMU node is the actual block responsible for power management,
including typical Exynos on/off/restart procedures. Therefore the
syscon poweroff and restart nodes logically belong to it.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Previously was "Fix missing missing reg warning for syscon restart
nodes" to fix DTC warnings like:
arch/arm/boot/dts/exynos4412-trats2.dtb: Warning (simple_bus_reg):
Node /soc/syscon-poweroff missing or empty reg/ranges property
arch/arm/boot/dts/exynos4412-trats2.dtb: Warning (simple_bus_reg):
Node /soc/syscon-reboot missing or empty reg/ranges property
but this warnings are gone in v4.17-rc1 since 9130ba884640
("scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987")
---
arch/arm/boot/dts/exynos-syscon-restart.dtsi | 28 ++++++++++++----------------
arch/arm/boot/dts/exynos3250.dtsi | 2 +-
arch/arm/boot/dts/exynos4.dtsi | 3 ++-
arch/arm/boot/dts/exynos5.dtsi | 1 -
arch/arm/boot/dts/exynos5250.dtsi | 1 +
arch/arm/boot/dts/exynos5410.dtsi | 1 +
arch/arm/boot/dts/exynos5420.dtsi | 1 +
7 files changed, 18 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
index 4b3dd0549a54..ecf416690a15 100644
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -3,22 +3,18 @@
* Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
*/
-/ {
- soc {
- compatible = "simple-bus";
-
- poweroff: syscon-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&pmu_system_controller>;
- offset = <0x330C>; /* PS_HOLD_CONTROL */
- mask = <0x5200>; /* reset value */
- };
+&pmu_system_controller {
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x0400>; /* SWRESET */
- mask = <0x1>;
- };
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
};
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 0a5f989d963b..962af97c1883 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -15,7 +15,6 @@
*/
#include "exynos4-cpu-thermal.dtsi"
-#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos3250.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -919,3 +918,4 @@
};
#include "exynos3250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 909a9f2bf5be..dfe41b698745 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -20,7 +20,6 @@
#include <dt-bindings/clock/exynos-audss-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos-syscon-restart.dtsi"
/ {
interrupt-parent = <&gic>;
@@ -1025,3 +1024,5 @@
};
};
};
+
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index f8d7de1144f1..359f49bdd4e2 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -12,7 +12,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos-syscon-restart.dtsi"
/ {
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 45283a6c5eee..85bfa8909af3 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1117,3 +1117,4 @@
};
#include "exynos5250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 55509c690328..20e789ea136f 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -439,3 +439,4 @@
};
#include "exynos5410-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 2f3cb2a97f71..71e2b154a244 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1531,3 +1531,4 @@
};
#include "exynos5420-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
--
2.14.1
next reply other threads:[~2018-04-16 18:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-16 18:11 Krzysztof Kozlowski [this message]
2018-04-16 18:11 ` [PATCH v3 1/2] ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMU Krzysztof Kozlowski
2018-04-16 18:11 ` [PATCH v3 2/2] arm64: " Krzysztof Kozlowski
2018-04-16 18:11 ` Krzysztof Kozlowski
2018-04-16 18:14 ` Krzysztof Kozlowski
2018-04-16 18:14 ` Krzysztof Kozlowski
2018-04-16 18:13 ` [PATCH v3 1/2] ARM: " Krzysztof Kozlowski
2018-04-16 18:13 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180416181126.15629-1-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.