All of lore.kernel.org
 help / color / mirror / Atom feed
From: jacopo mondi <jacopo@jmondi.org>
To: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	architt@codeaurora.org, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com, airlied@linux.ie,
	horms@verge.net.au, magnus.damm@gmail.com, geert@linux-m68k.org,
	niklas.soderlund@ragnatech.se,
	sergei.shtylyov@cogentembedded.com, robh+dt@kernel.org,
	mark.rutland@arm.com, dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
Date: Thu, 19 Apr 2018 12:32:07 +0200	[thread overview]
Message-ID: <20180419103207.GA4235@w540> (raw)
In-Reply-To: <29caaf6f-1783-9b01-5304-8748398d41c6@mentor.com>

[-- Attachment #1: Type: text/plain, Size: 2534 bytes --]

On Thu, Apr 19, 2018 at 12:44:32PM +0300, Vladimir Zapolskiy wrote:
Hi Vladimir,

> Hi Jacopo, Laurent,
>
> On 04/10/2018 01:53 PM, Jacopo Mondi wrote:
> > Document Thine THC63LVD1024 LVDS decoder device tree bindings.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
>
> > ---
> >  .../bindings/display/bridge/thine,thc63lvd1024.txt | 60 ++++++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> > new file mode 100644
> > index 0000000..0b23e70
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> > @@ -0,0 +1,60 @@
> > +Thine Electronics THC63LVD1024 LVDS decoder
> > +-------------------------------------------
> > +
> > +The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
> > +to parallel data outputs. The chip supports single/dual input/output modes,
> > +handling up to two LVDS input streams and up to two digital CMOS/TTL outputs.
> > +
> > +Single or dual operation mode, output data mapping and DDR output modes are
> > +configured through input signals and the chip does not expose any control bus.
> > +
> > +Required properties:
> > +- compatible: Shall be "thine,thc63lvd1024"
> > +- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
> > +  PPL and digital circuitry
> > +
> > +Optional properties:
> > +- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
>
> Thank you for the change.
>
> I would suggest to rename 'pwdn-gpios' property of THC63LVDM83D as well,
> as far as I understand it is only described in DT bindings documentation,
> and the property is unused in the driver or board DTS files at the moment.

Thanks for the suggestion, I'll do that!

>
> > +- oe-gpios: Output enable GPIO signal, pin name "OE". Active high
>
> Okay :)

Yeah, please see Rob's and Laurent's reply to v7, where I renamed this
to 'enable'.

Thanks
   j
>
> --
> With best wishes,
> Vladimir

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: jacopo mondi <jacopo@jmondi.org>
To: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	sergei.shtylyov@cogentembedded.com, airlied@linux.ie,
	dri-devel@lists.freedesktop.org, magnus.damm@gmail.com,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	linux-renesas-soc@vger.kernel.org, horms@verge.net.au,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	Laurent.pinchart@ideasonboard.com, niklas.soderlund@ragnatech.se,
	geert@linux-m68k.org
Subject: Re: [PATCH v8 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
Date: Thu, 19 Apr 2018 12:32:07 +0200	[thread overview]
Message-ID: <20180419103207.GA4235@w540> (raw)
In-Reply-To: <29caaf6f-1783-9b01-5304-8748398d41c6@mentor.com>


[-- Attachment #1.1: Type: text/plain, Size: 2534 bytes --]

On Thu, Apr 19, 2018 at 12:44:32PM +0300, Vladimir Zapolskiy wrote:
Hi Vladimir,

> Hi Jacopo, Laurent,
>
> On 04/10/2018 01:53 PM, Jacopo Mondi wrote:
> > Document Thine THC63LVD1024 LVDS decoder device tree bindings.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
>
> > ---
> >  .../bindings/display/bridge/thine,thc63lvd1024.txt | 60 ++++++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> > new file mode 100644
> > index 0000000..0b23e70
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> > @@ -0,0 +1,60 @@
> > +Thine Electronics THC63LVD1024 LVDS decoder
> > +-------------------------------------------
> > +
> > +The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
> > +to parallel data outputs. The chip supports single/dual input/output modes,
> > +handling up to two LVDS input streams and up to two digital CMOS/TTL outputs.
> > +
> > +Single or dual operation mode, output data mapping and DDR output modes are
> > +configured through input signals and the chip does not expose any control bus.
> > +
> > +Required properties:
> > +- compatible: Shall be "thine,thc63lvd1024"
> > +- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
> > +  PPL and digital circuitry
> > +
> > +Optional properties:
> > +- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
>
> Thank you for the change.
>
> I would suggest to rename 'pwdn-gpios' property of THC63LVDM83D as well,
> as far as I understand it is only described in DT bindings documentation,
> and the property is unused in the driver or board DTS files at the moment.

Thanks for the suggestion, I'll do that!

>
> > +- oe-gpios: Output enable GPIO signal, pin name "OE". Active high
>
> Okay :)

Yeah, please see Rob's and Laurent's reply to v7, where I renamed this
to 'enable'.

Thanks
   j
>
> --
> With best wishes,
> Vladimir

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2018-04-19 10:32 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-10 10:53 [PATCH v8 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
2018-04-10 10:53 ` [PATCH v8 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
2018-04-13 21:12   ` Rob Herring
2018-04-13 21:12     ` Rob Herring
2018-04-19  9:44   ` Vladimir Zapolskiy
2018-04-19  9:44     ` Vladimir Zapolskiy
2018-04-19  9:48     ` Vladimir Zapolskiy
2018-04-19  9:48       ` Vladimir Zapolskiy
2018-04-19 10:10       ` Vladimir Zapolskiy
2018-04-19 10:10         ` Vladimir Zapolskiy
2018-04-19 10:32     ` jacopo mondi [this message]
2018-04-19 10:32       ` jacopo mondi
2018-04-10 10:53 ` [PATCH v8 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver Jacopo Mondi
2018-04-13 16:28   ` jacopo mondi
2018-04-13 16:28     ` jacopo mondi
2018-04-19 11:18   ` Vladimir Zapolskiy
2018-04-19 11:18     ` Vladimir Zapolskiy
2018-04-19 12:33     ` jacopo mondi
2018-04-19 12:33       ` jacopo mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180419103207.GA4235@w540 \
    --to=jacopo@jmondi.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=architt@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=vladimir_zapolskiy@mentor.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.