From: Jonathan Cameron <jic23@kernel.org>
To: Brian Masney <masneyb@onstation.org>
Cc: linux-iio@vger.kernel.org, gregkh@linuxfoundation.org,
devel@driverdev.osuosl.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, linux-kernel@vger.kernel.org,
Jon.Brenner@ams.com
Subject: Re: [PATCH 10/13] staging: iio: tsl2x7x: rename prx to prox for consistency
Date: Sat, 21 Apr 2018 17:33:54 +0100 [thread overview]
Message-ID: <20180421173354.6a8ae0c1@archlinux> (raw)
In-Reply-To: <20180421004153.19073-11-masneyb@onstation.org>
On Fri, 20 Apr 2018 20:41:50 -0400
Brian Masney <masneyb@onstation.org> wrote:
> The driver mostly uses the 'prox' naming convention for most of the
> proximity settings, however prx_time and tsl2x7x_prx_gain was present.
> This patch renames these to prox_time and tsl2x7x_prox_gain for
> consistency with everything else in the driver.
>
> The kernel documentation for prx_gain is corrected to prox_gain so that
> it matches what is actually in the structure.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
Applied,
Thanks,
Jonathan
> ---
> drivers/staging/iio/light/tsl2x7x.c | 12 ++++++------
> drivers/staging/iio/light/tsl2x7x.h | 6 +++---
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
> index 87b99deef7a8..a7b4fcba7935 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -203,7 +203,7 @@ static const struct tsl2x7x_lux *tsl2x7x_default_lux_table_group[] = {
> static const struct tsl2x7x_settings tsl2x7x_default_settings = {
> .als_time = 219, /* 101 ms */
> .als_gain = 0,
> - .prx_time = 254, /* 5.4 ms */
> + .prox_time = 254, /* 5.4 ms */
> .prox_gain = 0,
> .wait_time = 245,
> .prox_config = 0,
> @@ -230,7 +230,7 @@ static const s16 tsl2x7x_als_gain[] = {
> 120
> };
>
> -static const s16 tsl2x7x_prx_gain[] = {
> +static const s16 tsl2x7x_prox_gain[] = {
> 1,
> 2,
> 4,
> @@ -594,7 +594,7 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
> u8 *dev_reg, reg_val;
>
> /* Non calculated parameters */
> - chip->tsl2x7x_config[TSL2X7X_PRX_TIME] = chip->settings.prx_time;
> + chip->tsl2x7x_config[TSL2X7X_PRX_TIME] = chip->settings.prox_time;
> chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] = chip->settings.wait_time;
> chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] = chip->settings.prox_config;
>
> @@ -1021,7 +1021,7 @@ static int tsl2x7x_write_event_value(struct iio_dev *indio_dev,
> if (chan->type == IIO_INTENSITY)
> time = chip->settings.als_time;
> else
> - time = chip->settings.prx_time;
> + time = chip->settings.prox_time;
>
> y = (TSL2X7X_MAX_TIMER_CNT - time) + 1;
> z = y * TSL2X7X_MIN_ITIME;
> @@ -1090,7 +1090,7 @@ static int tsl2x7x_read_event_value(struct iio_dev *indio_dev,
> time = chip->settings.als_time;
> mult = chip->settings.als_persistence;
> } else {
> - time = chip->settings.prx_time;
> + time = chip->settings.prox_time;
> mult = chip->settings.prox_persistence;
> }
>
> @@ -1153,7 +1153,7 @@ static int tsl2x7x_read_raw(struct iio_dev *indio_dev,
> if (chan->type == IIO_LIGHT)
> *val = tsl2x7x_als_gain[chip->settings.als_gain];
> else
> - *val = tsl2x7x_prx_gain[chip->settings.prox_gain];
> + *val = tsl2x7x_prox_gain[chip->settings.prox_gain];
> ret = IIO_VAL_INT;
> break;
> case IIO_CHAN_INFO_CALIBBIAS:
> diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h
> index 2c96f0b39b1e..408e5a89edb1 100644
> --- a/drivers/staging/iio/light/tsl2x7x.h
> +++ b/drivers/staging/iio/light/tsl2x7x.h
> @@ -44,9 +44,9 @@ struct tsl2x7x_lux {
> * aperture effects.
> * @wait_time: Time between PRX and ALS cycles
> * in 2.7 periods
> - * @prx_time: 5.2ms prox integration time -
> + * @prox_time: 5.2ms prox integration time -
> * decrease in 2.7ms periods
> - * @prx_gain: Proximity gain index
> + * @prox_gain: Proximity gain index
> * @prox_config: Prox configuration filters.
> * @als_cal_target: Known external ALS reading for
> * calibration.
> @@ -68,7 +68,7 @@ struct tsl2x7x_settings {
> int als_gain;
> int als_gain_trim;
> int wait_time;
> - int prx_time;
> + int prox_time;
> int prox_gain;
> int prox_config;
> int als_cal_target;
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jic23@kernel.org>
To: Brian Masney <masneyb@onstation.org>
Cc: devel@driverdev.osuosl.org, lars@metafoo.de,
linux-iio@vger.kernel.org, gregkh@linuxfoundation.org,
linux-kernel@vger.kernel.org, Jon.Brenner@ams.com,
pmeerw@pmeerw.net, knaack.h@gmx.de
Subject: Re: [PATCH 10/13] staging: iio: tsl2x7x: rename prx to prox for consistency
Date: Sat, 21 Apr 2018 17:33:54 +0100 [thread overview]
Message-ID: <20180421173354.6a8ae0c1@archlinux> (raw)
In-Reply-To: <20180421004153.19073-11-masneyb@onstation.org>
On Fri, 20 Apr 2018 20:41:50 -0400
Brian Masney <masneyb@onstation.org> wrote:
> The driver mostly uses the 'prox' naming convention for most of the
> proximity settings, however prx_time and tsl2x7x_prx_gain was present.
> This patch renames these to prox_time and tsl2x7x_prox_gain for
> consistency with everything else in the driver.
>
> The kernel documentation for prx_gain is corrected to prox_gain so that
> it matches what is actually in the structure.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
Applied,
Thanks,
Jonathan
> ---
> drivers/staging/iio/light/tsl2x7x.c | 12 ++++++------
> drivers/staging/iio/light/tsl2x7x.h | 6 +++---
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
> index 87b99deef7a8..a7b4fcba7935 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -203,7 +203,7 @@ static const struct tsl2x7x_lux *tsl2x7x_default_lux_table_group[] = {
> static const struct tsl2x7x_settings tsl2x7x_default_settings = {
> .als_time = 219, /* 101 ms */
> .als_gain = 0,
> - .prx_time = 254, /* 5.4 ms */
> + .prox_time = 254, /* 5.4 ms */
> .prox_gain = 0,
> .wait_time = 245,
> .prox_config = 0,
> @@ -230,7 +230,7 @@ static const s16 tsl2x7x_als_gain[] = {
> 120
> };
>
> -static const s16 tsl2x7x_prx_gain[] = {
> +static const s16 tsl2x7x_prox_gain[] = {
> 1,
> 2,
> 4,
> @@ -594,7 +594,7 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
> u8 *dev_reg, reg_val;
>
> /* Non calculated parameters */
> - chip->tsl2x7x_config[TSL2X7X_PRX_TIME] = chip->settings.prx_time;
> + chip->tsl2x7x_config[TSL2X7X_PRX_TIME] = chip->settings.prox_time;
> chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] = chip->settings.wait_time;
> chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] = chip->settings.prox_config;
>
> @@ -1021,7 +1021,7 @@ static int tsl2x7x_write_event_value(struct iio_dev *indio_dev,
> if (chan->type == IIO_INTENSITY)
> time = chip->settings.als_time;
> else
> - time = chip->settings.prx_time;
> + time = chip->settings.prox_time;
>
> y = (TSL2X7X_MAX_TIMER_CNT - time) + 1;
> z = y * TSL2X7X_MIN_ITIME;
> @@ -1090,7 +1090,7 @@ static int tsl2x7x_read_event_value(struct iio_dev *indio_dev,
> time = chip->settings.als_time;
> mult = chip->settings.als_persistence;
> } else {
> - time = chip->settings.prx_time;
> + time = chip->settings.prox_time;
> mult = chip->settings.prox_persistence;
> }
>
> @@ -1153,7 +1153,7 @@ static int tsl2x7x_read_raw(struct iio_dev *indio_dev,
> if (chan->type == IIO_LIGHT)
> *val = tsl2x7x_als_gain[chip->settings.als_gain];
> else
> - *val = tsl2x7x_prx_gain[chip->settings.prox_gain];
> + *val = tsl2x7x_prox_gain[chip->settings.prox_gain];
> ret = IIO_VAL_INT;
> break;
> case IIO_CHAN_INFO_CALIBBIAS:
> diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h
> index 2c96f0b39b1e..408e5a89edb1 100644
> --- a/drivers/staging/iio/light/tsl2x7x.h
> +++ b/drivers/staging/iio/light/tsl2x7x.h
> @@ -44,9 +44,9 @@ struct tsl2x7x_lux {
> * aperture effects.
> * @wait_time: Time between PRX and ALS cycles
> * in 2.7 periods
> - * @prx_time: 5.2ms prox integration time -
> + * @prox_time: 5.2ms prox integration time -
> * decrease in 2.7ms periods
> - * @prx_gain: Proximity gain index
> + * @prox_gain: Proximity gain index
> * @prox_config: Prox configuration filters.
> * @als_cal_target: Known external ALS reading for
> * calibration.
> @@ -68,7 +68,7 @@ struct tsl2x7x_settings {
> int als_gain;
> int als_gain_trim;
> int wait_time;
> - int prx_time;
> + int prox_time;
> int prox_gain;
> int prox_config;
> int als_cal_target;
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2018-04-21 16:34 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-21 0:41 [PATCH 00/13] iio: tsl2x7x: staging cleanups Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 0:41 ` [PATCH 01/13] staging: iio: tsl2x7x: move integration_time* attributes to IIO_INTENSITY channel Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:13 ` Jonathan Cameron
2018-04-21 16:13 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 02/13] staging: iio: tsl2x7x: use GPL-2.0+ SPDX license identifier Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:16 ` Jonathan Cameron
2018-04-21 16:16 ` Jonathan Cameron
2018-04-21 17:04 ` Brian Masney
2018-04-21 17:04 ` Brian Masney
2018-04-21 0:41 ` [PATCH 03/13] staging: iio: tsl2x7x: don't return error in IRQ handler Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:18 ` Jonathan Cameron
2018-04-21 16:18 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 04/13] staging: iio: tsl2x7x: simplify tsl2x7x_clear_interrupts function Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:20 ` Jonathan Cameron
2018-04-21 16:20 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 05/13] staging: iio: tsl2x7x: remove unnecessary chip status checks in suspend/resume Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:23 ` Jonathan Cameron
2018-04-21 16:23 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 06/13] staging: iio: tsl2x7x: simplify tsl2x7x_write_interrupt_config return Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:25 ` Jonathan Cameron
2018-04-21 16:25 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 07/13] staging: iio: tsl2x7x: simplify device id verification Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:26 ` Jonathan Cameron
2018-04-21 16:26 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 08/13] staging: iio: tsl2x7x: add range checking to three sysfs attributes Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:31 ` Jonathan Cameron
2018-04-21 16:31 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 09/13] staging: iio: tsl2x7x: move power and diode settings into header file Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:33 ` Jonathan Cameron
2018-04-21 16:33 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 10/13] staging: iio: tsl2x7x: rename prx to prox for consistency Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:33 ` Jonathan Cameron [this message]
2018-04-21 16:33 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 11/13] staging: iio: tsl2x7x: use device defaults for als_time, prox_time and wait_time Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:39 ` Jonathan Cameron
2018-04-21 16:39 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 12/13] staging: iio: tsl2x7x: various comment cleanups Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:37 ` Jonathan Cameron
2018-04-21 16:37 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 13/13] staging: iio: tsl2x7x: rename prox_config to als_prox_config Brian Masney
2018-04-21 0:41 ` Brian Masney
2018-04-21 16:38 ` Jonathan Cameron
2018-04-21 16:38 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180421173354.6a8ae0c1@archlinux \
--to=jic23@kernel.org \
--cc=Jon.Brenner@ams.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=masneyb@onstation.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.