[PATCH 0/3] Optimize use of DBuf slices

[PATCH 0/3] Optimize use of DBuf slices

[Mahesh Kumar]

Patches in this series were originally part of series:
https://patchwork.freedesktop.org/series/36993/

Reposting it here after rebase
use kernel types u8/u16 etc instead of uint8_t

Mahesh Kumar (3):
  drm/i915/icl: track dbuf slice-2 status
  drm/i915/icl: Enable 2nd DBuf slice only when needed
  drm/i915/icl: update ddb entry start/end mask during hw ddb readout

 drivers/gpu/drm/i915/i915_drv.h         |  1 +
 drivers/gpu/drm/i915/i915_reg.h         |  3 ++
 drivers/gpu/drm/i915/intel_display.c    | 15 ++++++
 drivers/gpu/drm/i915/intel_drv.h        |  6 +++
 drivers/gpu/drm/i915/intel_pm.c         | 95 +++++++++++++++++++++++++++------
 drivers/gpu/drm/i915/intel_runtime_pm.c | 69 +++++++++++++++++++-----
 6 files changed, 160 insertions(+), 29 deletions(-)

-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 1/3] drm/i915/icl: track dbuf slice-2 status

[Mahesh Kumar]

This patch adds support to start tracking status of DBUF slices.
This is foundation to introduce support for enabling/disabling second
DBUF slice dynamically for ICL.

Changes Since V1:
 - use kernel type u8 over uint8_t

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h         |  1 +
 drivers/gpu/drm/i915/intel_display.c    |  5 +++++
 drivers/gpu/drm/i915/intel_pm.c         | 20 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_runtime_pm.c |  4 ++++
 4 files changed, 30 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 5373b171bb96..4cefdb849760 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1184,6 +1184,7 @@ static inline bool skl_ddb_entry_equal(const struct skl_ddb_entry *e1,
 struct skl_ddb_allocation {
 	struct skl_ddb_entry plane[I915_MAX_PIPES][I915_MAX_PLANES]; /* packed/uv */
 	struct skl_ddb_entry y_plane[I915_MAX_PIPES][I915_MAX_PLANES];
+	u8 enabled_slices; /* GEN11 has configurable 2 slices */
 };
 
 struct skl_wm_values {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 415fb8cf2cf4..96a1e6a7f69e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11385,6 +11385,11 @@ static void verify_wm_state(struct drm_crtc *crtc,
 	skl_ddb_get_hw_state(dev_priv, &hw_ddb);
 	sw_ddb = &dev_priv->wm.skl_hw.ddb;
 
+	if (INTEL_GEN(dev_priv) >= 11)
+		if (hw_ddb.enabled_slices != sw_ddb->enabled_slices)
+			DRM_ERROR("mismatch in DBUF Slices (expected %u, got %u)\n",
+				  sw_ddb->enabled_slices,
+				  hw_ddb.enabled_slices);
 	/* planes */
 	for_each_universal_plane(dev_priv, pipe, plane) {
 		hw_plane_wm = &hw_wm.planes[plane];
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 19e82aaa9863..7341f4af3151 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3567,6 +3567,23 @@ bool ilk_disable_lp_wm(struct drm_device *dev)
 	return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL);
 }
 
+static u8 intel_enabled_dbuf_slices_num(struct drm_i915_private *dev_priv)
+{
+	u8 enabled_slices;
+
+	/* Slice 1 will always be enabled */
+	enabled_slices = 1;
+
+	/* Gen prior to GEN11 have only one DBuf slice */
+	if (INTEL_GEN(dev_priv) < 11)
+		return enabled_slices;
+
+	if (I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE)
+		enabled_slices++;
+
+	return enabled_slices;
+}
+
 /*
  * FIXME: We still don't have the proper code detect if we need to apply the WA,
  * so assume we'll always need it in order to avoid underruns.
@@ -3832,6 +3849,8 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
 
 	memset(ddb, 0, sizeof(*ddb));
 
+	ddb->enabled_slices = intel_enabled_dbuf_slices_num(dev_priv);
+
 	for_each_intel_crtc(&dev_priv->drm, crtc) {
 		enum intel_display_power_domain power_domain;
 		enum plane_id plane_id;
@@ -5050,6 +5069,7 @@ skl_copy_wm_for_pipe(struct skl_wm_values *dst,
 	       sizeof(dst->ddb.y_plane[pipe]));
 	memcpy(dst->ddb.plane[pipe], src->ddb.plane[pipe],
 	       sizeof(dst->ddb.plane[pipe]));
+	dst->ddb.enabled_slices = src->ddb.enabled_slices;
 }
 
 static void
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 53ea564f971e..58be542d660b 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -2664,6 +2664,8 @@ static void icl_dbuf_enable(struct drm_i915_private *dev_priv)
 	if (!(I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE) ||
 	    !(I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE))
 		DRM_ERROR("DBuf power enable timeout\n");
+	else
+		dev_priv->wm.skl_hw.ddb.enabled_slices = 2;
 }
 
 static void icl_dbuf_disable(struct drm_i915_private *dev_priv)
@@ -2677,6 +2679,8 @@ static void icl_dbuf_disable(struct drm_i915_private *dev_priv)
 	if ((I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE) ||
 	    (I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE))
 		DRM_ERROR("DBuf power disable timeout!\n");
+	else
+		dev_priv->wm.skl_hw.ddb.enabled_slices = 0;
 }
 
 static void icl_mbus_init(struct drm_i915_private *dev_priv)
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 2/3] drm/i915/icl: Enable 2nd DBuf slice only when needed

[Mahesh Kumar]

ICL has two slices of DBuf, each slice of size 1024 blocks.
We should not always enable slice-2. It should be enabled only if
display total required BW is > 12GBps OR more than 1 pipes are enabled.

Changes since V1:
 - typecast total_data_rate to u64 before multiplication to solve any
   possible overflow (Rodrigo)
 - fix where skl_wm_get_hw_state was memsetting ddb, resulting
   enabled_slices to become zero
 - Fix the logic of calculating ddb_size
Changes since V2:
 - If no-crtc is part of commit required_slices will have value "0",
   don't try to disable DBuf slice.
Changes since V3:
 - Create a generic helper to enable/disable slice
 - don't return early if total_data_rate is 0, it may be cursor only
   commit, or atomic modeset without any plane.
Changes since V3:
 - Solve checkpatch warnings
 - use kernel types u8/u64 instead of uint8_t/uint64_t

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c    | 10 +++++
 drivers/gpu/drm/i915/intel_drv.h        |  6 +++
 drivers/gpu/drm/i915/intel_pm.c         | 57 +++++++++++++++++++++++------
 drivers/gpu/drm/i915/intel_runtime_pm.c | 65 ++++++++++++++++++++++++++-------
 4 files changed, 113 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 96a1e6a7f69e..dfd7288b9484 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12196,6 +12196,8 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
 	bool progress;
 	enum pipe pipe;
 	int i;
+	u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
+	u8 required_slices = intel_state->wm_results.ddb.enabled_slices;
 
 	const struct skl_ddb_entry *entries[I915_MAX_PIPES] = {};
 
@@ -12204,6 +12206,10 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
 		if (new_crtc_state->active)
 			entries[i] = &to_intel_crtc_state(old_crtc_state)->wm.skl.ddb;
 
+	/* If 2nd DBuf slice required, enable it here */
+	if (INTEL_GEN(dev_priv) >= 11 && required_slices > hw_enabled_slices)
+		icl_dbuf_slices_update(dev_priv, required_slices);
+
 	/*
 	 * Whenever the number of active pipes changes, we need to make sure we
 	 * update the pipes in the right order so that their ddb allocations
@@ -12254,6 +12260,10 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
 			progress = true;
 		}
 	} while (progress);
+
+	/* If 2nd DBuf slice is no more required disable it */
+	if (INTEL_GEN(dev_priv) >= 11 && required_slices < hw_enabled_slices)
+		icl_dbuf_slices_update(dev_priv, required_slices);
 }
 
 static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d1452fd2a58d..13b9d9ce2c51 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -140,6 +140,10 @@
 #define KHz(x) (1000 * (x))
 #define MHz(x) KHz(1000 * (x))
 
+#define KBps(x) (1000 * (x))
+#define MBps(x) KBps(1000 * (x))
+#define GBps(x) ((u64)1000 * MBps((x)))
+
 /*
  * Display related stuff
  */
@@ -1914,6 +1918,8 @@ bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv,
 					enum intel_display_power_domain domain);
 void intel_display_power_put(struct drm_i915_private *dev_priv,
 			     enum intel_display_power_domain domain);
+void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
+			    u8 req_slices);
 
 static inline void
 assert_rpm_device_not_suspended(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 7341f4af3151..615a084736f3 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3771,9 +3771,42 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)
 	return true;
 }
 
+static unsigned int intel_get_ddb_size(struct drm_i915_private *dev_priv,
+				       const struct intel_crtc_state *cstate,
+				       const unsigned int total_data_rate,
+				       const int num_active,
+				       struct skl_ddb_allocation *ddb)
+{
+	const struct drm_display_mode *adjusted_mode;
+	u64 total_data_bw;
+	u16 ddb_size = INTEL_INFO(dev_priv)->ddb_size;
+
+	WARN_ON(ddb_size == 0);
+
+	if (INTEL_GEN(dev_priv) < 11)
+		return ddb_size - 4; /* 4 blocks for bypass path allocation */
+
+	adjusted_mode = &cstate->base.adjusted_mode;
+	total_data_bw = (u64)total_data_rate * drm_mode_vrefresh(adjusted_mode);
+
+	/*
+	 * 12GB/s is maximum BW supported by single DBuf slice.
+	 */
+	if (total_data_bw >= GBps(12) || num_active > 1) {
+		ddb->enabled_slices = 2;
+	} else {
+		ddb->enabled_slices = 1;
+		ddb_size /= 2;
+	}
+
+	return ddb_size;
+}
+
 static void
 skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
 				   const struct intel_crtc_state *cstate,
+				   const unsigned int total_data_rate,
+				   struct skl_ddb_allocation *ddb,
 				   struct skl_ddb_entry *alloc, /* out */
 				   int *num_active /* out */)
 {
@@ -3796,11 +3829,8 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
 	else
 		*num_active = hweight32(dev_priv->active_crtcs);
 
-	ddb_size = INTEL_INFO(dev_priv)->ddb_size;
-	WARN_ON(ddb_size == 0);
-
-	if (INTEL_GEN(dev_priv) < 11)
-		ddb_size -= 4; /* 4 blocks for bypass path allocation */
+	ddb_size = intel_get_ddb_size(dev_priv, cstate, total_data_rate,
+				      *num_active, ddb);
 
 	/*
 	 * If the state doesn't change the active CRTC's, then there's
@@ -4239,7 +4269,11 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
 		return 0;
 	}
 
-	skl_ddb_get_pipe_allocation_limits(dev, cstate, alloc, &num_active);
+	total_data_rate = skl_get_total_relative_data_rate(cstate,
+							   plane_data_rate,
+							   plane_y_data_rate);
+	skl_ddb_get_pipe_allocation_limits(dev, cstate, total_data_rate, ddb,
+					   alloc, &num_active);
 	alloc_size = skl_ddb_entry_size(alloc);
 	if (alloc_size == 0)
 		return 0;
@@ -4274,9 +4308,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
 	 *
 	 * FIXME: we may not allocate every single block here.
 	 */
-	total_data_rate = skl_get_total_relative_data_rate(cstate,
-							   plane_data_rate,
-							   plane_y_data_rate);
 	if (total_data_rate == 0)
 		return 0;
 
@@ -5382,8 +5413,12 @@ void skl_wm_get_hw_state(struct drm_device *dev)
 		/* Fully recompute DDB on first atomic commit */
 		dev_priv->wm.distrust_bios_wm = true;
 	} else {
-		/* Easy/common case; just sanitize DDB now if everything off */
-		memset(ddb, 0, sizeof(*ddb));
+		/*
+		 * Easy/common case; just sanitize DDB now if everything off
+		 * Keep dbuf slice info intact
+		 */
+		memset(ddb->plane, 0, sizeof(ddb->plane));
+		memset(ddb->y_plane, 0, sizeof(ddb->y_plane));
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 58be542d660b..06c111ca177e 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -2627,32 +2627,69 @@ static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
 	mutex_unlock(&power_domains->lock);
 }
 
-static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
+static inline
+bool intel_dbuf_slice_set(struct drm_i915_private *dev_priv,
+			  i915_reg_t reg, bool enable)
 {
-	I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
-	POSTING_READ(DBUF_CTL);
+	u32 val, status;
 
+	val = I915_READ(reg);
+	val = enable ? (val | DBUF_POWER_REQUEST) : (val & ~DBUF_POWER_REQUEST);
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
 	udelay(10);
 
-	if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
-		DRM_ERROR("DBuf power enable timeout\n");
+	status = I915_READ(reg) & DBUF_POWER_STATE;
+	if ((enable && !status) || (!enable && status)) {
+		DRM_ERROR("DBus power %s timeout!\n",
+			  enable ? "enable" : "disable");
+		return false;
+	}
+	return true;
+}
+
+static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
+{
+	intel_dbuf_slice_set(dev_priv, DBUF_CTL, true);
 }
 
 static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
 {
-	I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
-	POSTING_READ(DBUF_CTL);
+	intel_dbuf_slice_set(dev_priv, DBUF_CTL, false);
+}
 
-	udelay(10);
+static u8 intel_dbuf_max_slices(struct drm_i915_private *dev_priv)
+{
+	if (INTEL_GEN(dev_priv) < 11)
+		return 1;
+	return 2;
+}
 
-	if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
-		DRM_ERROR("DBuf power disable timeout!\n");
+void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
+			    u8 req_slices)
+{
+	u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
+	u32 val;
+	bool ret;
+
+	if (req_slices > intel_dbuf_max_slices(dev_priv)) {
+		DRM_ERROR("Invalid number of dbuf slices requested\n");
+		return;
+	}
+
+	if (req_slices == hw_enabled_slices || req_slices == 0)
+		return;
+
+	val = I915_READ(DBUF_CTL_S2);
+	if (req_slices > hw_enabled_slices)
+		ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, true);
+	else
+		ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, false);
+
+	if (ret)
+		dev_priv->wm.skl_hw.ddb.enabled_slices = req_slices;
 }
 
-/*
- * TODO: we shouldn't always enable DBUF_CTL_S2, we should only enable it when
- * needed and keep it disabled as much as possible.
- */
 static void icl_dbuf_enable(struct drm_i915_private *dev_priv)
 {
 	I915_WRITE(DBUF_CTL_S1, I915_READ(DBUF_CTL_S1) | DBUF_POWER_REQUEST);
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/3] drm/i915/icl: Enable 2nd DBuf slice only when needed

[Rodrigo Vivi]

On Thu, Apr 05, 2018 at 02:47:55PM +0530, Mahesh Kumar wrote:
> ICL has two slices of DBuf, each slice of size 1024 blocks.
> We should not always enable slice-2. It should be enabled only if
> display total required BW is > 12GBps OR more than 1 pipes are enabled.
>
> Changes since V1:
>  - typecast total_data_rate to u64 before multiplication to solve any
>    possible overflow (Rodrigo)
>  - fix where skl_wm_get_hw_state was memsetting ddb, resulting
>    enabled_slices to become zero
>  - Fix the logic of calculating ddb_size
> Changes since V2:
>  - If no-crtc is part of commit required_slices will have value "0",
>    don't try to disable DBuf slice.
> Changes since V3:
>  - Create a generic helper to enable/disable slice
>  - don't return early if total_data_rate is 0, it may be cursor only
>    commit, or atomic modeset without any plane.
> Changes since V3:
>  - Solve checkpatch warnings
>  - use kernel types u8/u64 instead of uint8_t/uint64_t

Paulo warned me that I reviewed the wrong one.

rv-b stays with this change.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

>
> Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c    | 10 +++++
>  drivers/gpu/drm/i915/intel_drv.h        |  6 +++
>  drivers/gpu/drm/i915/intel_pm.c         | 57 +++++++++++++++++++++++------
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 65 ++++++++++++++++++++++++++-------
>  4 files changed, 113 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 96a1e6a7f69e..dfd7288b9484 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -12196,6 +12196,8 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
>  	bool progress;
>  	enum pipe pipe;
>  	int i;
> +	u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
> +	u8 required_slices = intel_state->wm_results.ddb.enabled_slices;
>
>  	const struct skl_ddb_entry *entries[I915_MAX_PIPES] = {};
>
> @@ -12204,6 +12206,10 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
>  		if (new_crtc_state->active)
>  			entries[i] = &to_intel_crtc_state(old_crtc_state)->wm.skl.ddb;
>
> +	/* If 2nd DBuf slice required, enable it here */
> +	if (INTEL_GEN(dev_priv) >= 11 && required_slices > hw_enabled_slices)
> +		icl_dbuf_slices_update(dev_priv, required_slices);
> +
>  	/*
>  	 * Whenever the number of active pipes changes, we need to make sure we
>  	 * update the pipes in the right order so that their ddb allocations
> @@ -12254,6 +12260,10 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
>  			progress = true;
>  		}
>  	} while (progress);
> +
> +	/* If 2nd DBuf slice is no more required disable it */
> +	if (INTEL_GEN(dev_priv) >= 11 && required_slices < hw_enabled_slices)
> +		icl_dbuf_slices_update(dev_priv, required_slices);
>  }
>
>  static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index d1452fd2a58d..13b9d9ce2c51 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -140,6 +140,10 @@
>  #define KHz(x) (1000 * (x))
>  #define MHz(x) KHz(1000 * (x))
>
> +#define KBps(x) (1000 * (x))
> +#define MBps(x) KBps(1000 * (x))
> +#define GBps(x) ((u64)1000 * MBps((x)))
> +
>  /*
>   * Display related stuff
>   */
> @@ -1914,6 +1918,8 @@ bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv,
>  					enum intel_display_power_domain domain);
>  void intel_display_power_put(struct drm_i915_private *dev_priv,
>  			     enum intel_display_power_domain domain);
> +void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
> +			    u8 req_slices);
>
>  static inline void
>  assert_rpm_device_not_suspended(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 7341f4af3151..615a084736f3 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3771,9 +3771,42 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)
>  	return true;
>  }
>
> +static unsigned int intel_get_ddb_size(struct drm_i915_private *dev_priv,
> +				       const struct intel_crtc_state *cstate,
> +				       const unsigned int total_data_rate,
> +				       const int num_active,
> +				       struct skl_ddb_allocation *ddb)
> +{
> +	const struct drm_display_mode *adjusted_mode;
> +	u64 total_data_bw;
> +	u16 ddb_size = INTEL_INFO(dev_priv)->ddb_size;
> +
> +	WARN_ON(ddb_size == 0);
> +
> +	if (INTEL_GEN(dev_priv) < 11)
> +		return ddb_size - 4; /* 4 blocks for bypass path allocation */
> +
> +	adjusted_mode = &cstate->base.adjusted_mode;
> +	total_data_bw = (u64)total_data_rate * drm_mode_vrefresh(adjusted_mode);
> +
> +	/*
> +	 * 12GB/s is maximum BW supported by single DBuf slice.
> +	 */
> +	if (total_data_bw >= GBps(12) || num_active > 1) {
> +		ddb->enabled_slices = 2;
> +	} else {
> +		ddb->enabled_slices = 1;
> +		ddb_size /= 2;
> +	}
> +
> +	return ddb_size;
> +}
> +
>  static void
>  skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
>  				   const struct intel_crtc_state *cstate,
> +				   const unsigned int total_data_rate,
> +				   struct skl_ddb_allocation *ddb,
>  				   struct skl_ddb_entry *alloc, /* out */
>  				   int *num_active /* out */)
>  {
> @@ -3796,11 +3829,8 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
>  	else
>  		*num_active = hweight32(dev_priv->active_crtcs);
>
> -	ddb_size = INTEL_INFO(dev_priv)->ddb_size;
> -	WARN_ON(ddb_size == 0);
> -
> -	if (INTEL_GEN(dev_priv) < 11)
> -		ddb_size -= 4; /* 4 blocks for bypass path allocation */
> +	ddb_size = intel_get_ddb_size(dev_priv, cstate, total_data_rate,
> +				      *num_active, ddb);
>
>  	/*
>  	 * If the state doesn't change the active CRTC's, then there's
> @@ -4239,7 +4269,11 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
>  		return 0;
>  	}
>
> -	skl_ddb_get_pipe_allocation_limits(dev, cstate, alloc, &num_active);
> +	total_data_rate = skl_get_total_relative_data_rate(cstate,
> +							   plane_data_rate,
> +							   plane_y_data_rate);
> +	skl_ddb_get_pipe_allocation_limits(dev, cstate, total_data_rate, ddb,
> +					   alloc, &num_active);
>  	alloc_size = skl_ddb_entry_size(alloc);
>  	if (alloc_size == 0)
>  		return 0;
> @@ -4274,9 +4308,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
>  	 *
>  	 * FIXME: we may not allocate every single block here.
>  	 */
> -	total_data_rate = skl_get_total_relative_data_rate(cstate,
> -							   plane_data_rate,
> -							   plane_y_data_rate);
>  	if (total_data_rate == 0)
>  		return 0;
>
> @@ -5382,8 +5413,12 @@ void skl_wm_get_hw_state(struct drm_device *dev)
>  		/* Fully recompute DDB on first atomic commit */
>  		dev_priv->wm.distrust_bios_wm = true;
>  	} else {
> -		/* Easy/common case; just sanitize DDB now if everything off */
> -		memset(ddb, 0, sizeof(*ddb));
> +		/*
> +		 * Easy/common case; just sanitize DDB now if everything off
> +		 * Keep dbuf slice info intact
> +		 */
> +		memset(ddb->plane, 0, sizeof(ddb->plane));
> +		memset(ddb->y_plane, 0, sizeof(ddb->y_plane));
>  	}
>  }
>
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 58be542d660b..06c111ca177e 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -2627,32 +2627,69 @@ static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
>  	mutex_unlock(&power_domains->lock);
>  }
>
> -static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
> +static inline
> +bool intel_dbuf_slice_set(struct drm_i915_private *dev_priv,
> +			  i915_reg_t reg, bool enable)
>  {
> -	I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
> -	POSTING_READ(DBUF_CTL);
> +	u32 val, status;
>
> +	val = I915_READ(reg);
> +	val = enable ? (val | DBUF_POWER_REQUEST) : (val & ~DBUF_POWER_REQUEST);
> +	I915_WRITE(reg, val);
> +	POSTING_READ(reg);
>  	udelay(10);
>
> -	if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
> -		DRM_ERROR("DBuf power enable timeout\n");
> +	status = I915_READ(reg) & DBUF_POWER_STATE;
> +	if ((enable && !status) || (!enable && status)) {
> +		DRM_ERROR("DBus power %s timeout!\n",
> +			  enable ? "enable" : "disable");
> +		return false;
> +	}
> +	return true;
> +}
> +
> +static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
> +{
> +	intel_dbuf_slice_set(dev_priv, DBUF_CTL, true);
>  }
>
>  static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
>  {
> -	I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
> -	POSTING_READ(DBUF_CTL);
> +	intel_dbuf_slice_set(dev_priv, DBUF_CTL, false);
> +}
>
> -	udelay(10);
> +static u8 intel_dbuf_max_slices(struct drm_i915_private *dev_priv)
> +{
> +	if (INTEL_GEN(dev_priv) < 11)
> +		return 1;
> +	return 2;
> +}
>
> -	if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
> -		DRM_ERROR("DBuf power disable timeout!\n");
> +void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
> +			    u8 req_slices)
> +{
> +	u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
> +	u32 val;
> +	bool ret;
> +
> +	if (req_slices > intel_dbuf_max_slices(dev_priv)) {
> +		DRM_ERROR("Invalid number of dbuf slices requested\n");
> +		return;
> +	}
> +
> +	if (req_slices == hw_enabled_slices || req_slices == 0)
> +		return;
> +
> +	val = I915_READ(DBUF_CTL_S2);
> +	if (req_slices > hw_enabled_slices)
> +		ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, true);
> +	else
> +		ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, false);
> +
> +	if (ret)
> +		dev_priv->wm.skl_hw.ddb.enabled_slices = req_slices;
>  }
>
> -/*
> - * TODO: we shouldn't always enable DBUF_CTL_S2, we should only enable it when
> - * needed and keep it disabled as much as possible.
> - */
>  static void icl_dbuf_enable(struct drm_i915_private *dev_priv)
>  {
>  	I915_WRITE(DBUF_CTL_S1, I915_READ(DBUF_CTL_S1) | DBUF_POWER_REQUEST);
> --
> 2.16.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 3/3] drm/i915/icl: update ddb entry start/end mask during hw ddb readout

[Mahesh Kumar]

Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to
11 bits. This patch make changes to use proper mask for ICL+ during
hardware ddb value readout.

Changes since V1:
 - Use _MASK & _SHIFT macro (James)
Changes since V2:
 - use kernel type u8 instead of uint8_t

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h |  3 +++
 drivers/gpu/drm/i915/intel_pm.c | 18 ++++++++++++++----
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 176dca6554f4..e3a6c535617d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6459,6 +6459,9 @@ enum {
 
 #define _PLANE_BUF_CFG_1_B			0x7127c
 #define _PLANE_BUF_CFG_2_B			0x7137c
+#define  SKL_DDB_ENTRY_MASK			0x3FF
+#define  ICL_DDB_ENTRY_MASK			0x7FF
+#define  DDB_ENTRY_END_SHIFT			16
 #define _PLANE_BUF_CFG_1(pipe)	\
 	_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
 #define _PLANE_BUF_CFG_2(pipe)	\
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 615a084736f3..f7522b268494 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3864,10 +3864,18 @@ static unsigned int skl_cursor_allocation(int num_active)
 	return 8;
 }
 
-static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
+static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
+				       struct skl_ddb_entry *entry, u32 reg)
 {
-	entry->start = reg & 0x3ff;
-	entry->end = (reg >> 16) & 0x3ff;
+	u16 mask;
+
+	if (INTEL_GEN(dev_priv) >= 11)
+		mask = ICL_DDB_ENTRY_MASK;
+	else
+		mask = SKL_DDB_ENTRY_MASK;
+	entry->start = reg & mask;
+	entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
+
 	if (entry->end)
 		entry->end += 1;
 }
@@ -3898,7 +3906,9 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
 			else
 				val = I915_READ(CUR_BUF_CFG(pipe));
 
-			skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
+			skl_ddb_entry_init_from_hw(dev_priv,
+						   &ddb->plane[pipe][plane_id],
+						   val);
 		}
 
 		intel_display_power_put(dev_priv, power_domain);
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 3/3] drm/i915/icl: update ddb entry start/end mask during hw ddb readout

[Lucas De Marchi]

On Thu, Apr 05, 2018 at 02:47:56PM +0530, Mahesh Kumar wrote:
> Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to
> 11 bits. This patch make changes to use proper mask for ICL+ during
> hardware ddb value readout.
> 
> Changes since V1:
>  - Use _MASK & _SHIFT macro (James)
> Changes since V2:
>  - use kernel type u8 instead of uint8_t
> 
> Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>

This is independent of the other patches and could be applied even if
they need a new iteration.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

Lucas De Marchi

> ---
>  drivers/gpu/drm/i915/i915_reg.h |  3 +++
>  drivers/gpu/drm/i915/intel_pm.c | 18 ++++++++++++++----
>  2 files changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 176dca6554f4..e3a6c535617d 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6459,6 +6459,9 @@ enum {
>  
>  #define _PLANE_BUF_CFG_1_B			0x7127c
>  #define _PLANE_BUF_CFG_2_B			0x7137c
> +#define  SKL_DDB_ENTRY_MASK			0x3FF
> +#define  ICL_DDB_ENTRY_MASK			0x7FF
> +#define  DDB_ENTRY_END_SHIFT			16
>  #define _PLANE_BUF_CFG_1(pipe)	\
>  	_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
>  #define _PLANE_BUF_CFG_2(pipe)	\
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 615a084736f3..f7522b268494 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3864,10 +3864,18 @@ static unsigned int skl_cursor_allocation(int num_active)
>  	return 8;
>  }
>  
> -static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
> +static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
> +				       struct skl_ddb_entry *entry, u32 reg)
>  {
> -	entry->start = reg & 0x3ff;
> -	entry->end = (reg >> 16) & 0x3ff;
> +	u16 mask;
> +
> +	if (INTEL_GEN(dev_priv) >= 11)
> +		mask = ICL_DDB_ENTRY_MASK;
> +	else
> +		mask = SKL_DDB_ENTRY_MASK;
> +	entry->start = reg & mask;
> +	entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
> +
>  	if (entry->end)
>  		entry->end += 1;
>  }
> @@ -3898,7 +3906,9 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
>  			else
>  				val = I915_READ(CUR_BUF_CFG(pipe));
>  
> -			skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
> +			skl_ddb_entry_init_from_hw(dev_priv,
> +						   &ddb->plane[pipe][plane_id],
> +						   val);
>  		}
>  
>  		intel_display_power_put(dev_priv, power_domain);
> -- 
> 2.16.2
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 3/3] drm/i915/icl: update ddb entry start/end mask during hw ddb readout

[Rodrigo Vivi]

On Thu, Apr 05, 2018 at 02:47:56PM +0530, Mahesh Kumar wrote:
> Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to
> 11 bits. This patch make changes to use proper mask for ICL+ during
> hardware ddb value readout.
> 
> Changes since V1:
>  - Use _MASK & _SHIFT macro (James)
> Changes since V2:
>  - use kernel type u8 instead of uint8_t

Paulo warned me that I reviewed the wrong one.

rv-b stays with this change.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>



> 
> Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h |  3 +++
>  drivers/gpu/drm/i915/intel_pm.c | 18 ++++++++++++++----
>  2 files changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 176dca6554f4..e3a6c535617d 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6459,6 +6459,9 @@ enum {
>  
>  #define _PLANE_BUF_CFG_1_B			0x7127c
>  #define _PLANE_BUF_CFG_2_B			0x7137c
> +#define  SKL_DDB_ENTRY_MASK			0x3FF
> +#define  ICL_DDB_ENTRY_MASK			0x7FF
> +#define  DDB_ENTRY_END_SHIFT			16
>  #define _PLANE_BUF_CFG_1(pipe)	\
>  	_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
>  #define _PLANE_BUF_CFG_2(pipe)	\
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 615a084736f3..f7522b268494 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3864,10 +3864,18 @@ static unsigned int skl_cursor_allocation(int num_active)
>  	return 8;
>  }
>  
> -static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
> +static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
> +				       struct skl_ddb_entry *entry, u32 reg)
>  {
> -	entry->start = reg & 0x3ff;
> -	entry->end = (reg >> 16) & 0x3ff;
> +	u16 mask;
> +
> +	if (INTEL_GEN(dev_priv) >= 11)
> +		mask = ICL_DDB_ENTRY_MASK;
> +	else
> +		mask = SKL_DDB_ENTRY_MASK;
> +	entry->start = reg & mask;
> +	entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
> +
>  	if (entry->end)
>  		entry->end += 1;
>  }
> @@ -3898,7 +3906,9 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
>  			else
>  				val = I915_READ(CUR_BUF_CFG(pipe));
>  
> -			skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
> +			skl_ddb_entry_init_from_hw(dev_priv,
> +						   &ddb->plane[pipe][plane_id],
> +						   val);
>  		}
>  
>  		intel_display_power_put(dev_priv, power_domain);
> -- 
> 2.16.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for Optimize use of DBuf slices (rev2)

[Patchwork]

== Series Details ==

Series: Optimize use of DBuf slices (rev2)
URL   : https://patchwork.freedesktop.org/series/41180/
State : success

== Summary ==

Series 41180v2 Optimize use of DBuf slices
https://patchwork.freedesktop.org/api/1.0/series/41180/revisions/2/mbox/

---- Known issues:

Test gem_exec_suspend:
        Subgroup basic-s3:
                dmesg-warn -> PASS       (fi-glk-j4005) fdo#103359
Test gem_mmap_gtt:
        Subgroup basic-small-bo-tiledx:
                fail       -> PASS       (fi-gdg-551) fdo#102575

fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575

fi-bdw-5557u     total:285  pass:264  dwarn:0   dfail:0   fail:0   skip:21  time:429s
fi-bdw-gvtdvm    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:443s
fi-blb-e6850     total:285  pass:220  dwarn:1   dfail:0   fail:0   skip:64  time:382s
fi-bsw-n3050     total:285  pass:239  dwarn:0   dfail:0   fail:0   skip:46  time:542s
fi-bwr-2160      total:285  pass:180  dwarn:0   dfail:0   fail:0   skip:105 time:298s
fi-bxt-dsi       total:285  pass:255  dwarn:0   dfail:0   fail:0   skip:30  time:519s
fi-bxt-j4205     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:513s
fi-byt-j1900     total:285  pass:250  dwarn:0   dfail:0   fail:0   skip:35  time:518s
fi-byt-n2820     total:285  pass:246  dwarn:0   dfail:0   fail:0   skip:39  time:509s
fi-cfl-8700k     total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:409s
fi-cfl-s3        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:558s
fi-cfl-u         total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:513s
fi-cnl-y3        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:578s
fi-elk-e7500     total:285  pass:226  dwarn:0   dfail:0   fail:0   skip:59  time:423s
fi-gdg-551       total:285  pass:177  dwarn:0   dfail:0   fail:0   skip:108 time:314s
fi-glk-1         total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:541s
fi-glk-j4005     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:488s
fi-hsw-4770      total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:404s
fi-ilk-650       total:285  pass:225  dwarn:0   dfail:0   fail:0   skip:60  time:420s
fi-ivb-3520m     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:472s
fi-ivb-3770      total:285  pass:252  dwarn:0   dfail:0   fail:0   skip:33  time:438s
fi-kbl-7500u     total:285  pass:260  dwarn:1   dfail:0   fail:0   skip:24  time:473s
fi-kbl-7567u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:459s
fi-kbl-r         total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:511s
fi-skl-6260u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:444s
fi-skl-6600u     total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:532s
fi-skl-6700k2    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:509s
fi-skl-6770hq    total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:495s
fi-skl-guc       total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:432s
fi-skl-gvtdvm    total:285  pass:262  dwarn:0   dfail:0   fail:0   skip:23  time:446s
fi-snb-2520m     total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:569s
fi-snb-2600      total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:406s
Blacklisted hosts:
fi-cnl-psr       total:285  pass:256  dwarn:3   dfail:0   fail:0   skip:26  time:520s

e29a10513429cca404e9847a399efbdbb4bdd4bf drm-tip: 2018y-04m-04d-20h-47m-24s UTC integration manifest
22482dd69e4d drm/i915/icl: update ddb entry start/end mask during hw ddb readout
ccfacc054d50 drm/i915/icl: Enable 2nd DBuf slice only when needed
51b65036a7e8 drm/i915/icl: track dbuf slice-2 status

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8588/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.IGT: failure for Optimize use of DBuf slices (rev2)

[Patchwork]

== Series Details ==

Series: Optimize use of DBuf slices (rev2)
URL   : https://patchwork.freedesktop.org/series/41180/
State : failure

== Summary ==

---- Possible new issues:

Test kms_chv_cursor_fail:
        Subgroup pipe-c-128x128-top-edge:
                pass       -> FAIL       (shard-apl)

---- Known issues:

Test kms_flip:
        Subgroup 2x-flip-vs-expired-vblank-interruptible:
                fail       -> PASS       (shard-hsw) fdo#102887 +1
        Subgroup flip-vs-blocking-wf-vblank:
                fail       -> PASS       (shard-hsw) fdo#100368 +2
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-offscren-pri-shrfb-draw-pwrite:
                dmesg-fail -> PASS       (shard-apl) fdo#105685
Test kms_plane_multiple:
        Subgroup atomic-pipe-a-tiling-x:
                pass       -> FAIL       (shard-snb) fdo#103166
Test kms_rotation_crc:
        Subgroup primary-rotation-180:
                pass       -> FAIL       (shard-snb) fdo#103925
Test perf:
        Subgroup polling:
                pass       -> FAIL       (shard-hsw) fdo#102252

fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#105685 https://bugs.freedesktop.org/show_bug.cgi?id=105685
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252

shard-apl        total:2680 pass:1834 dwarn:1   dfail:0   fail:8   skip:836 time:12642s
shard-hsw        total:2680 pass:1784 dwarn:1   dfail:0   fail:3   skip:891 time:11518s
shard-snb        total:2680 pass:1376 dwarn:1   dfail:0   fail:4   skip:1299 time:6923s
Blacklisted hosts:
shard-kbl        total:2680 pass:1942 dwarn:21  dfail:0   fail:7   skip:710 time:9235s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8588/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.BAT: failure for Optimize use of DBuf slices (rev2)

[Patchwork]

== Series Details ==

Series: Optimize use of DBuf slices (rev2)
URL   : https://patchwork.freedesktop.org/series/41180/
State : failure

== Summary ==

Applying: drm/i915/icl: track dbuf slice-2 status
error: Failed to merge in the changes.
Using index info to reconstruct a base tree...
M	drivers/gpu/drm/i915/i915_drv.h
M	drivers/gpu/drm/i915/intel_display.c
M	drivers/gpu/drm/i915/intel_pm.c
M	drivers/gpu/drm/i915/intel_runtime_pm.c
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/intel_runtime_pm.c
Auto-merging drivers/gpu/drm/i915/intel_pm.c
Auto-merging drivers/gpu/drm/i915/intel_display.c
Auto-merging drivers/gpu/drm/i915/i915_drv.h
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_drv.h
Patch failed at 0001 drm/i915/icl: track dbuf slice-2 status
The copy of the patch that failed is found in: .git/rebase-apply/patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8588/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: ✗ Fi.CI.BAT: failure for Optimize use of DBuf slices (rev2)

[Rodrigo Vivi]

On Wed, Apr 25, 2018 at 09:46:23PM -0000, Patchwork wrote:
> == Series Details ==
> 
> Series: Optimize use of DBuf slices (rev2)
> URL   : https://patchwork.freedesktop.org/series/41180/
> State : failure
> 
> == Summary ==
> 
> Applying: drm/i915/icl: track dbuf slice-2 status
> error: Failed to merge in the changes.
> Using index info to reconstruct a base tree...
> M	drivers/gpu/drm/i915/i915_drv.h
> M	drivers/gpu/drm/i915/intel_display.c
> M	drivers/gpu/drm/i915/intel_pm.c
> M	drivers/gpu/drm/i915/intel_runtime_pm.c
> Falling back to patching base and 3-way merge...
> Auto-merging drivers/gpu/drm/i915/intel_runtime_pm.c
> Auto-merging drivers/gpu/drm/i915/intel_pm.c
> Auto-merging drivers/gpu/drm/i915/intel_display.c
> Auto-merging drivers/gpu/drm/i915/i915_drv.h
> CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_drv.h
> Patch failed at 0001 drm/i915/icl: track dbuf slice-2 status
> The copy of the patch that failed is found in: .git/rebase-apply/patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".

Mahesh, I'm really sorry for taking so long to review these patches....

Could you please send a rebased version so after CI giving the okay we push it.

Thanks in advance,
Rodrigo.

> 
> == Logs ==
> 
> For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8588/issues.html
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: ✗ Fi.CI.BAT: failure for Optimize use of DBuf slices (rev2)

[Kumar, Mahesh]

Hi,


On 4/26/2018 3:24 AM, Rodrigo Vivi wrote:
> On Wed, Apr 25, 2018 at 09:46:23PM -0000, Patchwork wrote:
>> == Series Details ==
>>
>> Series: Optimize use of DBuf slices (rev2)
>> URL   : https://patchwork.freedesktop.org/series/41180/
>> State : failure
>>
>> == Summary ==
>>
>> Applying: drm/i915/icl: track dbuf slice-2 status
>> error: Failed to merge in the changes.
>> Using index info to reconstruct a base tree...
>> M	drivers/gpu/drm/i915/i915_drv.h
>> M	drivers/gpu/drm/i915/intel_display.c
>> M	drivers/gpu/drm/i915/intel_pm.c
>> M	drivers/gpu/drm/i915/intel_runtime_pm.c
>> Falling back to patching base and 3-way merge...
>> Auto-merging drivers/gpu/drm/i915/intel_runtime_pm.c
>> Auto-merging drivers/gpu/drm/i915/intel_pm.c
>> Auto-merging drivers/gpu/drm/i915/intel_display.c
>> Auto-merging drivers/gpu/drm/i915/i915_drv.h
>> CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_drv.h
>> Patch failed at 0001 drm/i915/icl: track dbuf slice-2 status
>> The copy of the patch that failed is found in: .git/rebase-apply/patch
>> When you have resolved this problem, run "git am --continue".
>> If you prefer to skip this patch, run "git am --skip" instead.
>> To restore the original branch and stop patching, run "git am --abort".
> Mahesh, I'm really sorry for taking so long to review these patches....
>
> Could you please send a rebased version so after CI giving the okay we push it.
Thanks for review, Will resend the series after rebase.

Regards,
-Mahesh
>
> Thanks in advance,
> Rodrigo.
>
>> == Logs ==
>>
>> For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8588/issues.html
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx