From: David Lechner <david@lechnology.com>
To: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Sekhar Nori <nsekhar@ti.com>,
Kevin Hilman <khilman@kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Adam Ford <aford173@gmail.com>,
linux-kernel@vger.kernel.org,
David Lechner <david@lechnology.com>
Subject: [PATCH v9 11/27] ARM: davinci: da8xx: add new USB PHY clock init using common clock framework
Date: Thu, 26 Apr 2018 19:17:29 -0500 [thread overview]
Message-ID: <20180427001745.4116-12-david@lechnology.com> (raw)
In-Reply-To: <20180427001745.4116-1-david@lechnology.com>
This adds the new USB PHY clock init in mach-davinci/usb-da8xx.c using
the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Signed-off-by: David Lechner <david@lechnology.com>
---
v9 changes:
- none
v8 changes:
- rebased on "ARM: davinci: DA8XX: fix oops in USB PHY driver due to stack
allocated platform platform_data"
v7 changes:
- register platform device instead of registering clocks directly
- USB PHY clocks now treated as single device instead of registering them
separately
v6 changes:
- rename stuff to match changes in "clk: davinci: New driver for TI DA8XX USB
PHY clocks"
- take advantage of syscon lookup changes in "mfd: syscon: Add syscon_register()
function"
arch/arm/mach-davinci/board-da830-evm.c | 8 ++++++-
arch/arm/mach-davinci/board-omapl138-hawk.c | 9 +++++--
arch/arm/mach-davinci/da8xx-dt.c | 8 ++++++-
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
arch/arm/mach-davinci/usb-da8xx.c | 26 +++++++++++++++++++--
5 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 3973124e5f1d..6e77c458ec8e 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -110,6 +110,12 @@ static __init void da830_evm_usb_init(void)
{
int ret;
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
/* USB_REFCLKIN is not used. */
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
@@ -120,7 +126,7 @@ static __init void da830_evm_usb_init(void)
if (ret)
pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
__func__, ret);
-
+#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index eb09e333b6cd..6a866d29b114 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -231,7 +231,12 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
-
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
@@ -241,7 +246,7 @@ static __init void omapl138_hawk_usb_init(void)
if (ret)
pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
__func__, ret);
-
+#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 91dd9cb6d113..c4edf051ef9b 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -69,6 +69,12 @@ static void __init da850_init_machine(void)
da850_register_clocks();
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
@@ -77,7 +83,7 @@ static void __init da850_init_machine(void)
if (ret)
pr_warn("%s: registering USB 1.1 PHY clock failed: %d",
__func__, ret);
-
+#endif
ret = da850_register_sata_refclk(sata_refclkpn);
if (ret)
pr_warn("%s: registering SATA REFCLK failed: %d",
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 612e45437cec..5d7b1de9aa7e 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -106,6 +106,7 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
int da8xx_register_usb_refclkin(int rate);
int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
+int da8xx_register_usb_phy_clocks(void);
int da850_register_sata_refclk(int rate);
int da8xx_register_emac(void);
int da8xx_register_uio_pruss(void);
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index 50445f0e98de..c8d2f3075e69 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -2,29 +2,35 @@
/*
* DA8xx USB
*/
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
#include <linux/phy/phy.h>
+#include <linux/platform_data/clk-da8xx-cfgchip.h>
#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
-#include <mach/clock.h>
#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/da8xx.h>
#include <mach/irqs.h>
+#ifndef CONFIG_COMMON_CLK
+#include <mach/clock.h>
#include "clock.h"
+#endif
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
+#ifndef CONFIG_COMMON_CLK
static struct clk *usb20_clk;
+#endif
static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
@@ -134,6 +140,7 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
return platform_device_register(&da8xx_usb11_device);
}
+#ifndef CONFIG_COMMON_CLK
static struct clk usb_refclkin = {
.name = "usb_refclkin",
.set_rate = davinci_simple_set_rate,
@@ -360,3 +367,18 @@ int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
return ret;
}
+#endif
+static struct platform_device da8xx_usb_phy_clks_device = {
+ .name = "da830-usb-phy-clks",
+ .id = -1,
+};
+
+int __init da8xx_register_usb_phy_clocks(void)
+{
+ struct da8xx_cfgchip_clk_platform_data pdata;
+
+ pdata.cfgchip = da8xx_get_cfgchip();
+ da8xx_usb_phy_clks_device.dev.platform_data = &pdata;
+
+ return platform_device_register(&da8xx_usb_phy_clks_device);
+}
--
2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: david@lechnology.com (David Lechner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 11/27] ARM: davinci: da8xx: add new USB PHY clock init using common clock framework
Date: Thu, 26 Apr 2018 19:17:29 -0500 [thread overview]
Message-ID: <20180427001745.4116-12-david@lechnology.com> (raw)
In-Reply-To: <20180427001745.4116-1-david@lechnology.com>
This adds the new USB PHY clock init in mach-davinci/usb-da8xx.c using
the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Signed-off-by: David Lechner <david@lechnology.com>
---
v9 changes:
- none
v8 changes:
- rebased on "ARM: davinci: DA8XX: fix oops in USB PHY driver due to stack
allocated platform platform_data"
v7 changes:
- register platform device instead of registering clocks directly
- USB PHY clocks now treated as single device instead of registering them
separately
v6 changes:
- rename stuff to match changes in "clk: davinci: New driver for TI DA8XX USB
PHY clocks"
- take advantage of syscon lookup changes in "mfd: syscon: Add syscon_register()
function"
arch/arm/mach-davinci/board-da830-evm.c | 8 ++++++-
arch/arm/mach-davinci/board-omapl138-hawk.c | 9 +++++--
arch/arm/mach-davinci/da8xx-dt.c | 8 ++++++-
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
arch/arm/mach-davinci/usb-da8xx.c | 26 +++++++++++++++++++--
5 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 3973124e5f1d..6e77c458ec8e 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -110,6 +110,12 @@ static __init void da830_evm_usb_init(void)
{
int ret;
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
/* USB_REFCLKIN is not used. */
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
@@ -120,7 +126,7 @@ static __init void da830_evm_usb_init(void)
if (ret)
pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
__func__, ret);
-
+#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index eb09e333b6cd..6a866d29b114 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -231,7 +231,12 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
-
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
@@ -241,7 +246,7 @@ static __init void omapl138_hawk_usb_init(void)
if (ret)
pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
__func__, ret);
-
+#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 91dd9cb6d113..c4edf051ef9b 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -69,6 +69,12 @@ static void __init da850_init_machine(void)
da850_register_clocks();
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
@@ -77,7 +83,7 @@ static void __init da850_init_machine(void)
if (ret)
pr_warn("%s: registering USB 1.1 PHY clock failed: %d",
__func__, ret);
-
+#endif
ret = da850_register_sata_refclk(sata_refclkpn);
if (ret)
pr_warn("%s: registering SATA REFCLK failed: %d",
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 612e45437cec..5d7b1de9aa7e 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -106,6 +106,7 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
int da8xx_register_usb_refclkin(int rate);
int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
+int da8xx_register_usb_phy_clocks(void);
int da850_register_sata_refclk(int rate);
int da8xx_register_emac(void);
int da8xx_register_uio_pruss(void);
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index 50445f0e98de..c8d2f3075e69 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -2,29 +2,35 @@
/*
* DA8xx USB
*/
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
#include <linux/phy/phy.h>
+#include <linux/platform_data/clk-da8xx-cfgchip.h>
#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
-#include <mach/clock.h>
#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/da8xx.h>
#include <mach/irqs.h>
+#ifndef CONFIG_COMMON_CLK
+#include <mach/clock.h>
#include "clock.h"
+#endif
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
+#ifndef CONFIG_COMMON_CLK
static struct clk *usb20_clk;
+#endif
static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
@@ -134,6 +140,7 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
return platform_device_register(&da8xx_usb11_device);
}
+#ifndef CONFIG_COMMON_CLK
static struct clk usb_refclkin = {
.name = "usb_refclkin",
.set_rate = davinci_simple_set_rate,
@@ -360,3 +367,18 @@ int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
return ret;
}
+#endif
+static struct platform_device da8xx_usb_phy_clks_device = {
+ .name = "da830-usb-phy-clks",
+ .id = -1,
+};
+
+int __init da8xx_register_usb_phy_clocks(void)
+{
+ struct da8xx_cfgchip_clk_platform_data pdata;
+
+ pdata.cfgchip = da8xx_get_cfgchip();
+ da8xx_usb_phy_clks_device.dev.platform_data = &pdata;
+
+ return platform_device_register(&da8xx_usb_phy_clks_device);
+}
--
2.17.0
next prev parent reply other threads:[~2018-04-27 0:17 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-27 0:17 [PATCH v9 00/27] ARM: davinci: convert to common clock framework David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 01/27] clk: davinci: pll: allow dev == NULL David Lechner
2018-04-27 0:17 ` David Lechner
2018-05-01 13:27 ` Sekhar Nori
2018-05-01 13:27 ` Sekhar Nori
2018-05-01 13:27 ` Sekhar Nori
2018-05-02 1:44 ` David Lechner
2018-05-02 1:44 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 02/27] clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` David Lechner
2018-05-01 13:46 ` Sekhar Nori
2018-05-01 13:46 ` Sekhar Nori
2018-05-01 13:46 ` Sekhar Nori
2018-05-02 1:46 ` David Lechner
2018-05-02 1:46 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 03/27] clk: davinci: psc: allow for dev == NULL David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` David Lechner
2018-05-01 14:02 ` Sekhar Nori
2018-05-01 14:02 ` Sekhar Nori
2018-05-01 14:02 ` Sekhar Nori
2018-05-02 1:49 ` David Lechner
2018-05-02 1:49 ` David Lechner
2018-05-02 15:08 ` Sekhar Nori
2018-05-02 15:08 ` Sekhar Nori
2018-05-02 15:08 ` Sekhar Nori
2018-04-27 0:17 ` [PATCH v9 04/27] ARM: davinci: pass clock as parameter to davinci_timer_init() David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` David Lechner
2018-05-01 14:09 ` Sekhar Nori
2018-05-01 14:09 ` Sekhar Nori
2018-05-01 14:09 ` Sekhar Nori
2018-04-27 0:17 ` [PATCH v9 05/27] ARM: davinci: da830: add new clock init using common clock framework David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` David Lechner
2018-05-01 14:13 ` Sekhar Nori
2018-05-01 14:13 ` Sekhar Nori
2018-05-01 14:13 ` Sekhar Nori
2018-04-27 0:17 ` [PATCH v9 06/27] ARM: davinci: da850: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-05-01 14:17 ` Sekhar Nori
2018-05-01 14:17 ` Sekhar Nori
2018-05-01 14:17 ` Sekhar Nori
2018-04-27 0:17 ` [PATCH v9 07/27] ARM: davinci: dm355: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` David Lechner
2018-05-03 15:34 ` Sekhar Nori
2018-05-03 15:34 ` Sekhar Nori
2018-05-03 15:34 ` Sekhar Nori
2018-05-03 15:44 ` David Lechner
2018-05-03 15:44 ` David Lechner
2018-05-04 10:01 ` Sekhar Nori
2018-05-04 10:01 ` Sekhar Nori
2018-05-04 10:01 ` Sekhar Nori
2018-05-04 14:26 ` David Lechner
2018-05-04 14:26 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 08/27] ARM: davinci: dm365: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 09/27] ARM: davinci: dm644x: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-05-03 13:18 ` Sekhar Nori
2018-05-03 13:18 ` Sekhar Nori
2018-05-03 13:18 ` Sekhar Nori
2018-04-27 0:17 ` [PATCH v9 10/27] ARM: davinci: dm646x: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` David Lechner [this message]
2018-04-27 0:17 ` [PATCH v9 11/27] ARM: davinci: da8xx: add new USB PHY " David Lechner
2018-04-27 0:17 ` [PATCH v9 12/27] ARM: davinci: da8xx: add new sata_refclk " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 13/27] ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 14/27] ARM: davinci_all_defconfig: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 15/27] ARM: davinci: switch to common clock framework David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 16/27] ARM: davinci: da830: Remove legacy clock init David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 17/27] ARM: davinci: da850: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 18/27] ARM: davinci: dm355: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 19/27] ARM: davinci: dm365: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 20/27] ARM: davinci: dm644x: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 21/27] ARM: davinci: dm646x: " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 22/27] ARM: davinci: da8xx: Remove legacy USB and SATA " David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 23/27] ARM: davinci: remove legacy clocks David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 24/27] dt-bindings: timer: new bindings for TI DaVinci timer David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 14:05 ` Rob Herring
2018-04-27 14:05 ` Rob Herring
2018-04-27 14:05 ` Rob Herring
2018-05-02 1:52 ` David Lechner
2018-05-02 1:52 ` David Lechner
2018-05-02 5:03 ` Sekhar Nori
2018-05-02 5:03 ` Sekhar Nori
2018-05-02 5:03 ` Sekhar Nori
2018-04-27 0:17 ` [PATCH v9 25/27] ARM: davinci: add device tree support to timer David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 0:17 ` [PATCH v9 26/27] ARM: davinci: da8xx-dt: switch to device tree clocks David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 9:53 ` Bartosz Golaszewski
2018-04-27 9:53 ` Bartosz Golaszewski
2018-04-27 0:17 ` [PATCH v9 27/27] ARM: dts: da850: Add clocks David Lechner
2018-04-27 0:17 ` David Lechner
2018-04-27 12:04 ` [PATCH v9 00/27] ARM: davinci: convert to common clock framework Bartosz Golaszewski
2018-04-27 12:04 ` Bartosz Golaszewski
2018-04-30 20:35 ` Bartosz Golaszewski
2018-04-30 20:35 ` Bartosz Golaszewski
2018-05-01 14:45 ` Sekhar Nori
2018-05-01 14:45 ` Sekhar Nori
2018-05-01 14:45 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180427001745.4116-12-david@lechnology.com \
--to=david@lechnology.com \
--cc=aford173@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.