diff for duplicates of <20180502090110.GI3443@dragon>

diff --git a/a/1.txt b/N1/1.txt
index b8e7510..7ee4c37 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -4,24 +4,29 @@ On Thu, Apr 19, 2018 at 01:19:39PM +0200, Stefan Wahren wrote:
 > 
 > The bits for the i.MX6UL:
 > 
-> 000 CSI_DATA03_ALT8 ? Selecting Pad: CSI_DATA03 for Mode: ALT8
-> 001 GPIO1_IO08_ALT8 ? Selecting Pad: GPIO1_IO08 for Mode: ALT8
-> 010 GPIO1_IO09_ALT8 ? Selecting Pad: GPIO1_IO09 for Mode: ALT8
-> 011 ENET1_RX_EN_ALT1 ? Selecting Pad: ENET1_RX_EN for Mode: ALT1
-> 100 ENET1_TX_DATA0_ALT1 ? Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1
-> 101 CSI_DATA02_ALT8 ? Selecting Pad: CSI_DATA02 for Mode: ALT8
+> 000 CSI_DATA03_ALT8 — Selecting Pad: CSI_DATA03 for Mode: ALT8
+> 001 GPIO1_IO08_ALT8 — Selecting Pad: GPIO1_IO08 for Mode: ALT8
+> 010 GPIO1_IO09_ALT8 — Selecting Pad: GPIO1_IO09 for Mode: ALT8
+> 011 ENET1_RX_EN_ALT1 — Selecting Pad: ENET1_RX_EN for Mode: ALT1
+> 100 ENET1_TX_DATA0_ALT1 — Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1
+> 101 CSI_DATA02_ALT8 — Selecting Pad: CSI_DATA02 for Mode: ALT8
 > 
 > But for the i.MX6ULL:
 > 
-> 000 CSI_DATA03_ALT8 ? Selecting Pad: CSI_DATA03 for Mode: ALT8
-> 001 GPIO1_IO08_ALT8 ? Selecting Pad: GPIO1_IO08 for Mode: ALT8
-> 010 GPIO1_IO09_ALT8 ? Selecting Pad: GPIO1_IO09 for Mode: ALT8
-> 011 UART1_CTS_B_ALT9 ? Selecting Pad: UART1_CTS_B for Mode: ALT9
-> 100 UART1_RTS_B_ALT9 ? Selecting Pad: UART1_RTS_B for Mode: ALT9
-> 101 ENET1_RX_EN_ALT1 ? Selecting Pad: ENET1_RX_EN for Mode: ALT1
-> 110 ENET1_TX_DATA0_ALT1 ? Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1
-> 111 CSI_DATA02_ALT8 ? Selecting Pad: CSI_DATA02 for Mode: ALT8
+> 000 CSI_DATA03_ALT8 — Selecting Pad: CSI_DATA03 for Mode: ALT8
+> 001 GPIO1_IO08_ALT8 — Selecting Pad: GPIO1_IO08 for Mode: ALT8
+> 010 GPIO1_IO09_ALT8 — Selecting Pad: GPIO1_IO09 for Mode: ALT8
+> 011 UART1_CTS_B_ALT9 — Selecting Pad: UART1_CTS_B for Mode: ALT9
+> 100 UART1_RTS_B_ALT9 — Selecting Pad: UART1_RTS_B for Mode: ALT9
+> 101 ENET1_RX_EN_ALT1 — Selecting Pad: ENET1_RX_EN for Mode: ALT1
+> 110 ENET1_TX_DATA0_ALT1 — Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1
+> 111 CSI_DATA02_ALT8 — Selecting Pad: CSI_DATA02 for Mode: ALT8
 > 
 > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
 
 Applied, thanks.
+
+_______________________________________________
+linux-arm-kernel mailing list
+linux-arm-kernel@lists.infradead.org
+http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/a/content_digest b/N1/content_digest
index a3de41c..a88ff6b 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -1,8 +1,13 @@
  "ref\01524136779-13246-1-git-send-email-stefan.wahren@i2se.com\0"
- "From\0shawnguo@kernel.org (Shawn Guo)\0"
- "Subject\0[PATCH] ARM: dts: imx6ull: add UART5 RTS input select register\0"
+ "From\0Shawn Guo <shawnguo@kernel.org>\0"
+ "Subject\0Re: [PATCH] ARM: dts: imx6ull: add UART5 RTS input select register\0"
  "Date\0Wed, 2 May 2018 17:01:11 +0800\0"
- "To\0linux-arm-kernel@lists.infradead.org\0"
+ "To\0Stefan Wahren <stefan.wahren@i2se.com>\0"
+ "Cc\0Fabio Estevam <fabio.estevam@nxp.com>"
+  devicetree@vger.kernel.org
+  Greg Ungerer <gerg@linux-m68k.org>
+  Sascha Hauer <kernel@pengutronix.de>
+ " linux-arm-kernel@lists.infradead.org\0"
  "\00:1\0"
  "b\0"
  "On Thu, Apr 19, 2018 at 01:19:39PM +0200, Stefan Wahren wrote:\n"
@@ -11,26 +16,31 @@
  "> \n"
  "> The bits for the i.MX6UL:\n"
  "> \n"
- "> 000 CSI_DATA03_ALT8 ? Selecting Pad: CSI_DATA03 for Mode: ALT8\n"
- "> 001 GPIO1_IO08_ALT8 ? Selecting Pad: GPIO1_IO08 for Mode: ALT8\n"
- "> 010 GPIO1_IO09_ALT8 ? Selecting Pad: GPIO1_IO09 for Mode: ALT8\n"
- "> 011 ENET1_RX_EN_ALT1 ? Selecting Pad: ENET1_RX_EN for Mode: ALT1\n"
- "> 100 ENET1_TX_DATA0_ALT1 ? Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1\n"
- "> 101 CSI_DATA02_ALT8 ? Selecting Pad: CSI_DATA02 for Mode: ALT8\n"
+ "> 000 CSI_DATA03_ALT8 \342\200\224 Selecting Pad: CSI_DATA03 for Mode: ALT8\n"
+ "> 001 GPIO1_IO08_ALT8 \342\200\224 Selecting Pad: GPIO1_IO08 for Mode: ALT8\n"
+ "> 010 GPIO1_IO09_ALT8 \342\200\224 Selecting Pad: GPIO1_IO09 for Mode: ALT8\n"
+ "> 011 ENET1_RX_EN_ALT1 \342\200\224 Selecting Pad: ENET1_RX_EN for Mode: ALT1\n"
+ "> 100 ENET1_TX_DATA0_ALT1 \342\200\224 Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1\n"
+ "> 101 CSI_DATA02_ALT8 \342\200\224 Selecting Pad: CSI_DATA02 for Mode: ALT8\n"
  "> \n"
  "> But for the i.MX6ULL:\n"
  "> \n"
- "> 000 CSI_DATA03_ALT8 ? Selecting Pad: CSI_DATA03 for Mode: ALT8\n"
- "> 001 GPIO1_IO08_ALT8 ? Selecting Pad: GPIO1_IO08 for Mode: ALT8\n"
- "> 010 GPIO1_IO09_ALT8 ? Selecting Pad: GPIO1_IO09 for Mode: ALT8\n"
- "> 011 UART1_CTS_B_ALT9 ? Selecting Pad: UART1_CTS_B for Mode: ALT9\n"
- "> 100 UART1_RTS_B_ALT9 ? Selecting Pad: UART1_RTS_B for Mode: ALT9\n"
- "> 101 ENET1_RX_EN_ALT1 ? Selecting Pad: ENET1_RX_EN for Mode: ALT1\n"
- "> 110 ENET1_TX_DATA0_ALT1 ? Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1\n"
- "> 111 CSI_DATA02_ALT8 ? Selecting Pad: CSI_DATA02 for Mode: ALT8\n"
+ "> 000 CSI_DATA03_ALT8 \342\200\224 Selecting Pad: CSI_DATA03 for Mode: ALT8\n"
+ "> 001 GPIO1_IO08_ALT8 \342\200\224 Selecting Pad: GPIO1_IO08 for Mode: ALT8\n"
+ "> 010 GPIO1_IO09_ALT8 \342\200\224 Selecting Pad: GPIO1_IO09 for Mode: ALT8\n"
+ "> 011 UART1_CTS_B_ALT9 \342\200\224 Selecting Pad: UART1_CTS_B for Mode: ALT9\n"
+ "> 100 UART1_RTS_B_ALT9 \342\200\224 Selecting Pad: UART1_RTS_B for Mode: ALT9\n"
+ "> 101 ENET1_RX_EN_ALT1 \342\200\224 Selecting Pad: ENET1_RX_EN for Mode: ALT1\n"
+ "> 110 ENET1_TX_DATA0_ALT1 \342\200\224 Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1\n"
+ "> 111 CSI_DATA02_ALT8 \342\200\224 Selecting Pad: CSI_DATA02 for Mode: ALT8\n"
  "> \n"
  "> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>\n"
  "\n"
- Applied, thanks.
+ "Applied, thanks.\n"
+ "\n"
+ "_______________________________________________\n"
+ "linux-arm-kernel mailing list\n"
+ "linux-arm-kernel@lists.infradead.org\n"
+ http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
 
-9cd37f4e08aa3f10ac5e5703d01f883c9975d7a1689456003682eab2bf069239
+188f9407c0cc269d6ca60a7db27d9dcbdf66ced7a20674c7fe3c9a9cc8e9bbd6
