From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: imx6ull: add UART5 RTS input select register
Date: Wed, 2 May 2018 17:01:11 +0800 [thread overview]
Message-ID: <20180502090110.GI3443@dragon> (raw)
In-Reply-To: <1524136779-13246-1-git-send-email-stefan.wahren@i2se.com>
On Thu, Apr 19, 2018 at 01:19:39PM +0200, Stefan Wahren wrote:
> The iMX6ULL UART5_RTS_B_DATA_SELECT_INPUT DAISY Register has some different
> bit definitions to that same register in the i.MX6UL.
>
> The bits for the i.MX6UL:
>
> 000 CSI_DATA03_ALT8 ? Selecting Pad: CSI_DATA03 for Mode: ALT8
> 001 GPIO1_IO08_ALT8 ? Selecting Pad: GPIO1_IO08 for Mode: ALT8
> 010 GPIO1_IO09_ALT8 ? Selecting Pad: GPIO1_IO09 for Mode: ALT8
> 011 ENET1_RX_EN_ALT1 ? Selecting Pad: ENET1_RX_EN for Mode: ALT1
> 100 ENET1_TX_DATA0_ALT1 ? Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1
> 101 CSI_DATA02_ALT8 ? Selecting Pad: CSI_DATA02 for Mode: ALT8
>
> But for the i.MX6ULL:
>
> 000 CSI_DATA03_ALT8 ? Selecting Pad: CSI_DATA03 for Mode: ALT8
> 001 GPIO1_IO08_ALT8 ? Selecting Pad: GPIO1_IO08 for Mode: ALT8
> 010 GPIO1_IO09_ALT8 ? Selecting Pad: GPIO1_IO09 for Mode: ALT8
> 011 UART1_CTS_B_ALT9 ? Selecting Pad: UART1_CTS_B for Mode: ALT9
> 100 UART1_RTS_B_ALT9 ? Selecting Pad: UART1_RTS_B for Mode: ALT9
> 101 ENET1_RX_EN_ALT1 ? Selecting Pad: ENET1_RX_EN for Mode: ALT1
> 110 ENET1_TX_DATA0_ALT1 ? Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1
> 111 CSI_DATA02_ALT8 ? Selecting Pad: CSI_DATA02 for Mode: ALT8
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Applied, thanks.
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>,
devicetree@vger.kernel.org, Greg Ungerer <gerg@linux-m68k.org>,
Sascha Hauer <kernel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: imx6ull: add UART5 RTS input select register
Date: Wed, 2 May 2018 17:01:11 +0800 [thread overview]
Message-ID: <20180502090110.GI3443@dragon> (raw)
In-Reply-To: <1524136779-13246-1-git-send-email-stefan.wahren@i2se.com>
On Thu, Apr 19, 2018 at 01:19:39PM +0200, Stefan Wahren wrote:
> The iMX6ULL UART5_RTS_B_DATA_SELECT_INPUT DAISY Register has some different
> bit definitions to that same register in the i.MX6UL.
>
> The bits for the i.MX6UL:
>
> 000 CSI_DATA03_ALT8 — Selecting Pad: CSI_DATA03 for Mode: ALT8
> 001 GPIO1_IO08_ALT8 — Selecting Pad: GPIO1_IO08 for Mode: ALT8
> 010 GPIO1_IO09_ALT8 — Selecting Pad: GPIO1_IO09 for Mode: ALT8
> 011 ENET1_RX_EN_ALT1 — Selecting Pad: ENET1_RX_EN for Mode: ALT1
> 100 ENET1_TX_DATA0_ALT1 — Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1
> 101 CSI_DATA02_ALT8 — Selecting Pad: CSI_DATA02 for Mode: ALT8
>
> But for the i.MX6ULL:
>
> 000 CSI_DATA03_ALT8 — Selecting Pad: CSI_DATA03 for Mode: ALT8
> 001 GPIO1_IO08_ALT8 — Selecting Pad: GPIO1_IO08 for Mode: ALT8
> 010 GPIO1_IO09_ALT8 — Selecting Pad: GPIO1_IO09 for Mode: ALT8
> 011 UART1_CTS_B_ALT9 — Selecting Pad: UART1_CTS_B for Mode: ALT9
> 100 UART1_RTS_B_ALT9 — Selecting Pad: UART1_RTS_B for Mode: ALT9
> 101 ENET1_RX_EN_ALT1 — Selecting Pad: ENET1_RX_EN for Mode: ALT1
> 110 ENET1_TX_DATA0_ALT1 — Selecting Pad: ENET1_TX_DATA0 for Mode: ALT1
> 111 CSI_DATA02_ALT8 — Selecting Pad: CSI_DATA02 for Mode: ALT8
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-05-02 9:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-19 11:19 [PATCH] ARM: dts: imx6ull: add UART5 RTS input select register Stefan Wahren
2018-04-19 11:19 ` Stefan Wahren
2018-04-25 15:22 ` Rob Herring
2018-04-25 15:22 ` Rob Herring
2018-05-02 9:01 ` Shawn Guo [this message]
2018-05-02 9:01 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180502090110.GI3443@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.