From: David Lechner <david@lechnology.com>
To: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: David Lechner <david@lechnology.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Sekhar Nori <nsekhar@ti.com>,
Kevin Hilman <khilman@kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Adam Ford <aford173@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v11 06/27] ARM: davinci: da850: add new clock init using common clock framework
Date: Fri, 18 May 2018 11:48:08 -0500 [thread overview]
Message-ID: <20180518164829.27052-7-david@lechnology.com> (raw)
In-Reply-To: <20180518164829.27052-1-david@lechnology.com>
This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Some CFGCHIP macros were removed because we are now including
linux/mfd/da8xx-cfgchip.h which defines the same values.
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- register PLL in da850_init_time() instead of as platform device so that we
get the correct timer0 clock for davinci_timer_init()
v8 changes:
- add platform data for PLL clocks
v7 changes:
- add clock platform device declarations
- register platform devices instead of registering clocks directly
- clkdev lookup is moved to drivers/clk
- add davinci prefix to commit description
v6 changes:
- add blank lines between function calls
- include da8xx_register_cfgchip()
- add async1 and async2 clock domains
arch/arm/mach-davinci/board-da850-evm.c | 2 +
arch/arm/mach-davinci/board-mityomapl138.c | 2 +
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +
arch/arm/mach-davinci/da850.c | 155 ++++++++++++++++++--
arch/arm/mach-davinci/da8xx-dt.c | 2 +
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
6 files changed, 151 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e22fb40e34bc..442c16773f09 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1340,6 +1340,8 @@ static __init void da850_evm_init(void)
{
int ret;
+ da850_register_clocks();
+
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 37b3e48a21d1..2cce0d7d2f2a 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -503,6 +503,8 @@ static void __init mityomapl138_init(void)
{
int ret;
+ da850_register_clocks();
+
/* for now, no special EDMA channels are reserved */
ret = da850_register_edma(NULL);
if (ret)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index be8b892a6ea7..7653e9425d44 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -285,6 +285,8 @@ static __init void omapl138_hawk_init(void)
{
int ret;
+ da850_register_clocks();
+
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 1dbf01c4124b..9e00beb943c9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,39 +11,45 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
+#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/init.h>
-#include <linux/clk.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/platform_data/clk-da8xx-cfgchip.h>
+#include <linux/platform_data/clk-davinci-pll.h>
+#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
+#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
-#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
-#include "psc.h"
-#include <mach/irqs.h>
-#include <mach/cputype.h>
#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
#include <mach/cpufreq.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
#include <mach/pm.h>
+#include <mach/time.h>
-#include "clock.h"
#include "mux.h"
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
+
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
-#define CFGCHIP3_ASYNC3_CLKSRC BIT(4)
-#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5)
-#define CFGCHIP0_PLL_MASTER_LOCK BIT(4)
-
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate);
static int da850_round_armrate(struct clk *clk, unsigned long rate);
static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
@@ -583,6 +589,7 @@ static struct clk_lookup da850_clks[] = {
CLK("ecap.2", "fck", &ecap2_clk),
CLK(NULL, NULL, NULL),
};
+#endif
/*
* Device specific mux setup
@@ -1170,6 +1177,7 @@ int da850_register_cpufreq(char *async_clk)
return platform_device_register(&da850_cpufreq_device);
}
+#ifndef CONFIG_COMMON_CLK
static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
int ret = 0, diff;
@@ -1232,12 +1240,14 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
return 0;
}
+#endif /* CONFIG_COMMON_CLK */
#else
int __init da850_register_cpufreq(char *async_clk)
{
return 0;
}
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate)
{
return -EINVAL;
@@ -1252,6 +1262,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
return clk->rate;
}
+#endif /* CONFIG_COMMON_CLK */
#endif
/* VPIF resource, platform data */
@@ -1395,6 +1406,124 @@ void __init da850_init(void)
void __init da850_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll0;
+ struct regmap *cfgchip;
+ struct clk *clk;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
+
+ pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+ cfgchip = da8xx_get_cfgchip();
+
+ da850_pll0_init(NULL, pll0, cfgchip);
+
+ clk = clk_get(NULL, "timer0");
+
+ davinci_timer_init(clk);
+#else
davinci_clk_init(da850_clks);
davinci_timer_init(&timerp64_0_clk);
+#endif
+}
+
+static struct resource da850_pll1_resources[] = {
+ {
+ .start = DA850_PLL1_BASE,
+ .end = DA850_PLL1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct davinci_pll_platform_data da850_pll1_pdata;
+
+static struct platform_device da850_pll1_device = {
+ .name = "da850-pll1",
+ .id = -1,
+ .resource = da850_pll1_resources,
+ .num_resources = ARRAY_SIZE(da850_pll1_resources),
+ .dev = {
+ .platform_data = &da850_pll1_pdata,
+ },
+};
+
+static struct resource da850_psc0_resources[] = {
+ {
+ .start = DA8XX_PSC0_BASE,
+ .end = DA8XX_PSC0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da850_psc0_device = {
+ .name = "da850-psc0",
+ .id = -1,
+ .resource = da850_psc0_resources,
+ .num_resources = ARRAY_SIZE(da850_psc0_resources),
+};
+
+static struct resource da850_psc1_resources[] = {
+ {
+ .start = DA8XX_PSC1_BASE,
+ .end = DA8XX_PSC1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da850_psc1_device = {
+ .name = "da850-psc1",
+ .id = -1,
+ .resource = da850_psc1_resources,
+ .num_resources = ARRAY_SIZE(da850_psc1_resources),
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata;
+
+static struct platform_device da850_async1_clksrc_device = {
+ .name = "da850-async1-clksrc",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_async1_pdata,
+ },
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata;
+
+static struct platform_device da850_async3_clksrc_device = {
+ .name = "da850-async3-clksrc",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_async3_pdata,
+ },
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata;
+
+static struct platform_device da850_tbclksync_device = {
+ .name = "da830-tbclksync",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_tbclksync_pdata,
+ },
+};
+
+void __init da850_register_clocks(void)
+{
+ /* PLL0 is registered in da850_init_time() */
+
+ da850_pll1_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_pll1_device);
+
+ da850_async1_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_async1_clksrc_device);
+
+ da850_async3_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_async3_clksrc_device);
+
+ platform_device_register(&da850_psc0_device);
+
+ platform_device_register(&da850_psc1_device);
+
+ da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_tbclksync_device);
}
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index ab199f4b9ce4..91dd9cb6d113 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -67,6 +67,8 @@ static void __init da850_init_machine(void)
int ret;
+ da850_register_clocks();
+
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 64861ac6a9d4..612e45437cec 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -93,6 +93,7 @@ void da830_register_clocks(void);
void da850_init(void);
void da850_init_time(void);
+void da850_register_clocks(void);
int da830_register_edma(struct edma_rsv_info *rsv);
int da850_register_edma(struct edma_rsv_info *rsv[2]);
--
2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: david@lechnology.com (David Lechner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 06/27] ARM: davinci: da850: add new clock init using common clock framework
Date: Fri, 18 May 2018 11:48:08 -0500 [thread overview]
Message-ID: <20180518164829.27052-7-david@lechnology.com> (raw)
In-Reply-To: <20180518164829.27052-1-david@lechnology.com>
This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Also clean up the #includes since we are adding some here.
Some CFGCHIP macros were removed because we are now including
linux/mfd/da8xx-cfgchip.h which defines the same values.
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
---
v11 changes:
- none
v10 changes:
- none
v9 changes:
- register PLL in da850_init_time() instead of as platform device so that we
get the correct timer0 clock for davinci_timer_init()
v8 changes:
- add platform data for PLL clocks
v7 changes:
- add clock platform device declarations
- register platform devices instead of registering clocks directly
- clkdev lookup is moved to drivers/clk
- add davinci prefix to commit description
v6 changes:
- add blank lines between function calls
- include da8xx_register_cfgchip()
- add async1 and async2 clock domains
arch/arm/mach-davinci/board-da850-evm.c | 2 +
arch/arm/mach-davinci/board-mityomapl138.c | 2 +
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +
arch/arm/mach-davinci/da850.c | 155 ++++++++++++++++++--
arch/arm/mach-davinci/da8xx-dt.c | 2 +
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
6 files changed, 151 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e22fb40e34bc..442c16773f09 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1340,6 +1340,8 @@ static __init void da850_evm_init(void)
{
int ret;
+ da850_register_clocks();
+
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 37b3e48a21d1..2cce0d7d2f2a 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -503,6 +503,8 @@ static void __init mityomapl138_init(void)
{
int ret;
+ da850_register_clocks();
+
/* for now, no special EDMA channels are reserved */
ret = da850_register_edma(NULL);
if (ret)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index be8b892a6ea7..7653e9425d44 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -285,6 +285,8 @@ static __init void omapl138_hawk_init(void)
{
int ret;
+ da850_register_clocks();
+
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 1dbf01c4124b..9e00beb943c9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,39 +11,45 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
+#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/init.h>
-#include <linux/clk.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/platform_data/clk-da8xx-cfgchip.h>
+#include <linux/platform_data/clk-davinci-pll.h>
+#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
+#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
-#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
-#include "psc.h"
-#include <mach/irqs.h>
-#include <mach/cputype.h>
#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
#include <mach/cpufreq.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
#include <mach/pm.h>
+#include <mach/time.h>
-#include "clock.h"
#include "mux.h"
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
+
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
-#define CFGCHIP3_ASYNC3_CLKSRC BIT(4)
-#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5)
-#define CFGCHIP0_PLL_MASTER_LOCK BIT(4)
-
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate);
static int da850_round_armrate(struct clk *clk, unsigned long rate);
static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
@@ -583,6 +589,7 @@ static struct clk_lookup da850_clks[] = {
CLK("ecap.2", "fck", &ecap2_clk),
CLK(NULL, NULL, NULL),
};
+#endif
/*
* Device specific mux setup
@@ -1170,6 +1177,7 @@ int da850_register_cpufreq(char *async_clk)
return platform_device_register(&da850_cpufreq_device);
}
+#ifndef CONFIG_COMMON_CLK
static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
int ret = 0, diff;
@@ -1232,12 +1240,14 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
return 0;
}
+#endif /* CONFIG_COMMON_CLK */
#else
int __init da850_register_cpufreq(char *async_clk)
{
return 0;
}
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate)
{
return -EINVAL;
@@ -1252,6 +1262,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
return clk->rate;
}
+#endif /* CONFIG_COMMON_CLK */
#endif
/* VPIF resource, platform data */
@@ -1395,6 +1406,124 @@ void __init da850_init(void)
void __init da850_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll0;
+ struct regmap *cfgchip;
+ struct clk *clk;
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
+
+ pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+ cfgchip = da8xx_get_cfgchip();
+
+ da850_pll0_init(NULL, pll0, cfgchip);
+
+ clk = clk_get(NULL, "timer0");
+
+ davinci_timer_init(clk);
+#else
davinci_clk_init(da850_clks);
davinci_timer_init(&timerp64_0_clk);
+#endif
+}
+
+static struct resource da850_pll1_resources[] = {
+ {
+ .start = DA850_PLL1_BASE,
+ .end = DA850_PLL1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct davinci_pll_platform_data da850_pll1_pdata;
+
+static struct platform_device da850_pll1_device = {
+ .name = "da850-pll1",
+ .id = -1,
+ .resource = da850_pll1_resources,
+ .num_resources = ARRAY_SIZE(da850_pll1_resources),
+ .dev = {
+ .platform_data = &da850_pll1_pdata,
+ },
+};
+
+static struct resource da850_psc0_resources[] = {
+ {
+ .start = DA8XX_PSC0_BASE,
+ .end = DA8XX_PSC0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da850_psc0_device = {
+ .name = "da850-psc0",
+ .id = -1,
+ .resource = da850_psc0_resources,
+ .num_resources = ARRAY_SIZE(da850_psc0_resources),
+};
+
+static struct resource da850_psc1_resources[] = {
+ {
+ .start = DA8XX_PSC1_BASE,
+ .end = DA8XX_PSC1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da850_psc1_device = {
+ .name = "da850-psc1",
+ .id = -1,
+ .resource = da850_psc1_resources,
+ .num_resources = ARRAY_SIZE(da850_psc1_resources),
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata;
+
+static struct platform_device da850_async1_clksrc_device = {
+ .name = "da850-async1-clksrc",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_async1_pdata,
+ },
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata;
+
+static struct platform_device da850_async3_clksrc_device = {
+ .name = "da850-async3-clksrc",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_async3_pdata,
+ },
+};
+
+static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata;
+
+static struct platform_device da850_tbclksync_device = {
+ .name = "da830-tbclksync",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_tbclksync_pdata,
+ },
+};
+
+void __init da850_register_clocks(void)
+{
+ /* PLL0 is registered in da850_init_time() */
+
+ da850_pll1_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_pll1_device);
+
+ da850_async1_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_async1_clksrc_device);
+
+ da850_async3_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_async3_clksrc_device);
+
+ platform_device_register(&da850_psc0_device);
+
+ platform_device_register(&da850_psc1_device);
+
+ da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip();
+ platform_device_register(&da850_tbclksync_device);
}
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index ab199f4b9ce4..91dd9cb6d113 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -67,6 +67,8 @@ static void __init da850_init_machine(void)
int ret;
+ da850_register_clocks();
+
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 64861ac6a9d4..612e45437cec 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -93,6 +93,7 @@ void da830_register_clocks(void);
void da850_init(void);
void da850_init_time(void);
+void da850_register_clocks(void);
int da830_register_edma(struct edma_rsv_info *rsv);
int da850_register_edma(struct edma_rsv_info *rsv[2]);
--
2.17.0
next prev parent reply other threads:[~2018-05-18 16:48 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-18 16:48 [PATCH v11 00/27] ARM: davinci: convert to common clock framework David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 01/27] clk: davinci: pll: allow dev == NULL David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-22 8:43 ` Sekhar Nori
2018-05-22 8:43 ` Sekhar Nori
2018-05-22 8:43 ` Sekhar Nori
2018-05-18 16:48 ` [PATCH v11 02/27] clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 03/27] clk: davinci: psc: allow for dev == NULL David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-22 9:05 ` Sekhar Nori
2018-05-22 9:05 ` Sekhar Nori
2018-05-22 9:05 ` Sekhar Nori
2018-05-18 16:48 ` [PATCH v11 04/27] ARM: davinci: pass clock as parameter to davinci_timer_init() David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 05/27] ARM: davinci: da830: add new clock init using common clock framework David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` David Lechner [this message]
2018-05-18 16:48 ` [PATCH v11 06/27] ARM: davinci: da850: " David Lechner
2018-05-18 16:48 ` [PATCH v11 07/27] ARM: davinci: dm355: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 08/27] ARM: davinci: dm365: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 09/27] ARM: davinci: dm644x: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 10/27] ARM: davinci: dm646x: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 11/27] ARM: davinci: da8xx: add new USB PHY " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 12/27] ARM: davinci: da8xx: add new sata_refclk " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 13/27] ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 14/27] ARM: davinci_all_defconfig: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 15/27] ARM: davinci: switch to common clock framework David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 16/27] ARM: davinci: da830: Remove legacy clock init David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 17/27] ARM: davinci: da850: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 18/27] ARM: davinci: dm355: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 19/27] ARM: davinci: dm365: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 20/27] ARM: davinci: dm644x: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 21/27] ARM: davinci: dm646x: " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 22/27] ARM: davinci: da8xx: Remove legacy USB and SATA " David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 23/27] ARM: davinci: remove legacy clocks David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 24/27] dt-bindings: timer: new bindings for TI DaVinci timer David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 25/27] ARM: davinci: add device tree support to timer David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 26/27] ARM: davinci: da8xx-dt: switch to device tree clocks David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-18 16:48 ` [PATCH v11 27/27] ARM: dts: da850: Add clocks David Lechner
2018-05-18 16:48 ` David Lechner
2018-05-22 9:38 ` [PATCH v11 00/27] ARM: davinci: convert to common clock framework Sekhar Nori
2018-05-22 9:38 ` Sekhar Nori
2018-05-22 9:38 ` Sekhar Nori
2018-05-25 18:21 ` David Lechner
2018-05-25 18:21 ` David Lechner
2018-06-26 12:56 ` Sekhar Nori
2018-06-26 12:56 ` Sekhar Nori
2018-06-26 12:56 ` Sekhar Nori
2018-06-26 15:34 ` David Lechner
2018-06-26 15:34 ` David Lechner
2018-06-17 15:48 ` David Lechner
2018-06-17 15:48 ` David Lechner
2018-06-18 4:47 ` Sekhar Nori
2018-06-18 4:47 ` Sekhar Nori
2018-06-18 4:47 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180518164829.27052-7-david@lechnology.com \
--to=david@lechnology.com \
--cc=aford173@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.