From: Daniel Mack <daniel@zonque.org>
To: dmitry.torokhov@gmail.com, robh+dt@kernel.org,
mark.rutland@arm.com, shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com
Cc: devicetree@vger.kernel.org, Daniel Mack <daniel@zonque.org>,
linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org
Subject: [PATCH 1/2] ARM: dts: imx6: make edt-ft5x06 a wakeup source for imx6 boards
Date: Wed, 23 May 2018 10:30:12 +0200 [thread overview]
Message-ID: <20180523083013.7570-1-daniel@zonque.org> (raw)
The touchscreen driver no longer configures the device as wakeup source by
default. A "wakeup-source" property is needed.
Signed-off-by: Daniel Mack <daniel@zonque.org>
---
arch/arm/boot/dts/imx6q-var-dt6customboard.dts | 1 +
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 1 +
5 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index e0728d475f6f..7537d77b3415 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -179,6 +179,7 @@
touchscreen-size-y = <480>;
touchscreen-inverted-x;
touchscreen-inverted-y;
+ wakeup-source;
};
rtc@68 {
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index aab088f318e8..aef4a756ca81 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -292,6 +292,7 @@
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
};
rtc@6f {
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 87ca6ead4098..9cb464b65be1 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -442,6 +442,7 @@
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index f5b763d39285..5e4da6d6fcff 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -360,6 +360,7 @@
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 596866b0a0d2..a14872436c5e 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -370,6 +370,7 @@
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
};
};
--
2.14.3
WARNING: multiple messages have this Message-ID (diff)
From: daniel@zonque.org (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: imx6: make edt-ft5x06 a wakeup source for imx6 boards
Date: Wed, 23 May 2018 10:30:12 +0200 [thread overview]
Message-ID: <20180523083013.7570-1-daniel@zonque.org> (raw)
The touchscreen driver no longer configures the device as wakeup source by
default. A "wakeup-source" property is needed.
Signed-off-by: Daniel Mack <daniel@zonque.org>
---
arch/arm/boot/dts/imx6q-var-dt6customboard.dts | 1 +
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 1 +
5 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index e0728d475f6f..7537d77b3415 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -179,6 +179,7 @@
touchscreen-size-y = <480>;
touchscreen-inverted-x;
touchscreen-inverted-y;
+ wakeup-source;
};
rtc at 68 {
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index aab088f318e8..aef4a756ca81 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -292,6 +292,7 @@
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
};
rtc at 6f {
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 87ca6ead4098..9cb464b65be1 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -442,6 +442,7 @@
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index f5b763d39285..5e4da6d6fcff 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -360,6 +360,7 @@
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 596866b0a0d2..a14872436c5e 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -370,6 +370,7 @@
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
};
};
--
2.14.3
next reply other threads:[~2018-05-23 8:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 8:30 Daniel Mack [this message]
2018-05-23 8:30 ` [PATCH 1/2] ARM: dts: imx6: make edt-ft5x06 a wakeup source for imx6 boards Daniel Mack
2018-05-23 8:30 ` [PATCH 2/2] ARM: dts: am437x: " Daniel Mack
2018-05-23 8:30 ` Daniel Mack
2018-06-11 7:44 ` Shawn Guo
2018-06-11 7:44 ` Shawn Guo
2018-06-11 7:56 ` Tony Lindgren
2018-06-11 7:56 ` Tony Lindgren
2018-06-11 7:42 ` [PATCH 1/2] ARM: dts: imx6: " Shawn Guo
2018-06-11 7:42 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180523083013.7570-1-daniel@zonque.org \
--to=daniel@zonque.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.