All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eugeniu Rosca <roscaeugeniu@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 6/6] test: dm: Fix wrong aliases property names
Date: Fri, 25 May 2018 00:04:38 +0200	[thread overview]
Message-ID: <20180524220438.GA14935@example.com> (raw)
In-Reply-To: <CAPnjgZ2XhwORUhbrsg1EB4=xafPKgLOU=oXxM=r-kwJMnCo7Pw@mail.gmail.com>

Hi Simon,

On Tue, May 22, 2018 at 05:30:40PM -0600, Simon Glass wrote:
> Hi Eugeniu,
> 
> On 19 May 2018 at 06:13, Eugeniu Rosca <roscaeugeniu@gmail.com> wrote:

--snip--

> > v2->v3:
> > * Fixed an issue in the test code (test/dm/test-fdt.c) generated by the
> >   DTS update (arch/sandbox/dts/test.dts) in [PATCH v2].
> > * Changed commit summary line, to cover test/dm/test-fdt.c.
> > * Added: Reported-by: Petr Vorel <pvorel@suse.cz>
> > * [Due to update] Dropped: Reviewed-by: Simon Glass <sjg@chromium.org>
> >
> > v1->v2:
> > * Newly pushed
> >
> >  arch/sandbox/dts/test.dts | 8 ++++----
> >  test/dm/test-fdt.c        | 2 +-
> >  2 files changed, 5 insertions(+), 5 deletions(-)
> >
> 
> Reviewed-by: Simon Glass <sjg@chromium.org>
> 
> See below
> 
> > diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
> > index 683b1970e0af..3e87c5c0f3fd 100644
> > --- a/arch/sandbox/dts/test.dts
> > +++ b/arch/sandbox/dts/test.dts
> > @@ -27,10 +27,10 @@
> >                 testfdt3 = "/b-test";
> >                 testfdt5 = "/some-bus/c-test at 5";
> >                 testfdt8 = "/a-test";
> > -               fdt_dummy0 = "/translation-test at 8000/dev at 0,0";
> > -               fdt_dummy1 = "/translation-test at 8000/dev at 1,100";
> > -               fdt_dummy2 = "/translation-test at 8000/dev at 2,200";
> > -               fdt_dummy3 = "/translation-test at 8000/noxlatebus at 3,300/dev at 42";
> > +               fdt-dummy0 = "/translation-test at 8000/dev at 0,0";
> > +               fdt-dummy1 = "/translation-test at 8000/dev at 1,100";
> > +               fdt-dummy2 = "/translation-test at 8000/dev at 2,200";
> > +               fdt-dummy3 = "/translation-test at 8000/noxlatebus at 3,300/dev at 42";
> >                 usb0 = &usb_0;
> >                 usb1 = &usb_1;
> >                 usb2 = &usb_2;
> > diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
> > index 8196844e89a7..66d0df5629a2 100644
> > --- a/test/dm/test-fdt.c
> > +++ b/test/dm/test-fdt.c
> > @@ -425,7 +425,7 @@ static const struct udevice_id fdt_dummy_ids[] = {
> >  };
> >
> >  UCLASS_DRIVER(fdt_dummy) = {
> > -       .name           = "fdt_dummy",
> > +       .name           = "fdt-dummy",
> 
> You should not need to change this one, and I worry that it is
> confusing since this is the driver name, not a compatible string.

I am not familiar with the in-tree U-boot unit tests, but doing a small
experiment I get clear evidence that there is a tight
relationship/dependency between the name of the entries in the aliases
DTS node and the "name" field of UCLASS_DRIVER using that DTS.

The experiment is running 'ut dm' in sandbox before and after below
patch (I also had to fix two null pointer dereferences in
test/dm/bus.c to avoid segmentation faults with the patch applied):

diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
index 8196844e89a7..5b715e965269 100644
--- a/test/dm/test-fdt.c
+++ b/test/dm/test-fdt.c
@@ -94,7 +94,7 @@ int testfdt_ping(struct udevice *dev, int pingval, int *pingret)
 }
 
 UCLASS_DRIVER(testfdt) = {
-	.name		= "testfdt",
+	.name		= "test_fdt",
 	.id		= UCLASS_TEST_FDT,
 	.flags		= DM_UC_FLAG_SEQ_ALIAS,
 };

Before the patch, I get: Failures: 9 
After the patch, I get: Failures: 25

So, while the aliases entries are certainly not compatible strings,
not keeping them aligned to UCLASS_DRIVER->name values leads to test
failures. I am not sure if this is something specific to architecture of
the tests or applies generically to any driver which fetches its
configuration from DTS. I was hoping to get an assessment from somebody
with more experience in this area.

Besides the above, it is not clear to me if your Reviewed-by applies to
to this patch partially (since you expressed some concerns) or applies
globally, in which case the concerns are not major?

> 
> >         .id             = UCLASS_TEST_DUMMY,
> >         .flags          = DM_UC_FLAG_SEQ_ALIAS,
> >  };
> > --
> > 2.17.0
> >
> 
> Regards,
> Simon

Best regards,
Eugeniu.

  reply	other threads:[~2018-05-24 22:04 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-19 12:13 [U-Boot] [PATCH v3 1/6] kconfig: re-sync with Linux 4.17-rc4 Eugeniu Rosca
2018-05-19 12:13 ` [U-Boot] [PATCH v3 2/6] board: eets: pdu001: Fix wrong default value in Kconfig Eugeniu Rosca
2018-05-22  8:07   ` Felix Brack
2018-05-22  8:29     ` Eugeniu Rosca
2018-05-31 18:16   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-05-19 12:13 ` [U-Boot] [PATCH v3 3/6] scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 Eugeniu Rosca
2018-05-31 18:16   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-05-19 12:13 ` [U-Boot] [PATCH v3 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987 Eugeniu Rosca
2018-05-31 18:16   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-05-19 12:13 ` [U-Boot] [PATCH v3 5/6] scripts/dtc: Re-sync with Linux 4.17-rc4 Eugeniu Rosca
2018-05-31 18:16   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-05-19 12:13 ` [U-Boot] [PATCH v3 6/6] test: dm: Fix wrong aliases property names Eugeniu Rosca
2018-05-22 23:30   ` Simon Glass
2018-05-24 22:04     ` Eugeniu Rosca [this message]
2018-05-26  2:07       ` Simon Glass
2018-05-26 11:04         ` Eugeniu Rosca
2018-05-27  0:53           ` Simon Glass
2018-05-31 18:16   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-05-21 10:59 ` [U-Boot] [PATCH v3 1/6] kconfig: re-sync with Linux 4.17-rc4 Petr Vorel
2018-05-21 14:29   ` Eugeniu Rosca
2018-05-31 18:16 ` [U-Boot] [U-Boot,v3,1/6] " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180524220438.GA14935@example.com \
    --to=roscaeugeniu@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.