All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH][next] pinctrl: pinctrl-single: add allocation failure checking of saved_vals
Date: Thu, 07 Jun 2018 07:35:43 +0000	[thread overview]
Message-ID: <20180607073543.GP13775@localhost> (raw)
In-Reply-To: <CAHp75Vd0Djw+nDN7u=-CLEfdDGA5QTsMueOb9EZLNnCDgso5fA@mail.gmail.com>

On Wed, Jun 06, 2018 at 07:02:03PM +0300, Andy Shevchenko wrote:
> On Wed, Jun 6, 2018 at 4:43 PM, Colin King <colin.king@canonical.com> wrote:
> > From: Colin Ian King <colin.king@canonical.com>
> >
> > Currently saved_vals is being allocated and there is no check for
> > failed allocation (which is more likely than normal when using
> > GFP_ATOMIC).  Fix this by checking for a failed allocation and
> > propagating this error return down the the caller chain.
> >
> > Detected by CoverityScan, CID#1469841 ("Dereference null return value")
> >
> > Fixes: 88a1dbdec682 ("pinctrl: pinctrl-single: Add functions to save and restore pinctrl context")
> > Signed-off-by: Colin Ian King <colin.king@canonical.com>
> > ---
> >  drivers/pinctrl/pinctrl-single.c | 14 +++++++++++---
> >  1 file changed, 11 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
> > index 9c3c00515aa0..0905ee002041 100644
> > --- a/drivers/pinctrl/pinctrl-single.c
> > +++ b/drivers/pinctrl/pinctrl-single.c
> > @@ -1588,8 +1588,11 @@ static int pcs_save_context(struct pcs_device *pcs)
> >
> >         mux_bytes = pcs->width / BITS_PER_BYTE;
> >
> > -       if (!pcs->saved_vals)
> > +       if (!pcs->saved_vals) {
> >                 pcs->saved_vals = devm_kzalloc(pcs->dev, pcs->size, GFP_ATOMIC);
> 
> > +               if (!pcs->saved_vals)
> > +                       return -ENOMEM;
> 
> Wouldn't make sense to move it out of the first condition?
> 
> Something like
> 
> if (!foo)
>  foo = ...malloc(...);
> if (!foo)
>  return ...

No, checking for NULL immediately after the allocation is more obvious
and easier to parse.

Johan

WARNING: multiple messages have this Message-ID (diff)
From: Johan Hovold <johan@kernel.org>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Colin King <colin.king@canonical.com>,
	Tony Lindgren <tony@atomide.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	kernel-janitors@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
	Haojian Zhuang <haojian.zhuang@linaro.org>,
	Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH][next] pinctrl: pinctrl-single: add allocation failure checking of saved_vals
Date: Thu, 7 Jun 2018 09:35:43 +0200	[thread overview]
Message-ID: <20180607073543.GP13775@localhost> (raw)
In-Reply-To: <CAHp75Vd0Djw+nDN7u=-CLEfdDGA5QTsMueOb9EZLNnCDgso5fA@mail.gmail.com>

On Wed, Jun 06, 2018 at 07:02:03PM +0300, Andy Shevchenko wrote:
> On Wed, Jun 6, 2018 at 4:43 PM, Colin King <colin.king@canonical.com> wrote:
> > From: Colin Ian King <colin.king@canonical.com>
> >
> > Currently saved_vals is being allocated and there is no check for
> > failed allocation (which is more likely than normal when using
> > GFP_ATOMIC).  Fix this by checking for a failed allocation and
> > propagating this error return down the the caller chain.
> >
> > Detected by CoverityScan, CID#1469841 ("Dereference null return value")
> >
> > Fixes: 88a1dbdec682 ("pinctrl: pinctrl-single: Add functions to save and restore pinctrl context")
> > Signed-off-by: Colin Ian King <colin.king@canonical.com>
> > ---
> >  drivers/pinctrl/pinctrl-single.c | 14 +++++++++++---
> >  1 file changed, 11 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
> > index 9c3c00515aa0..0905ee002041 100644
> > --- a/drivers/pinctrl/pinctrl-single.c
> > +++ b/drivers/pinctrl/pinctrl-single.c
> > @@ -1588,8 +1588,11 @@ static int pcs_save_context(struct pcs_device *pcs)
> >
> >         mux_bytes = pcs->width / BITS_PER_BYTE;
> >
> > -       if (!pcs->saved_vals)
> > +       if (!pcs->saved_vals) {
> >                 pcs->saved_vals = devm_kzalloc(pcs->dev, pcs->size, GFP_ATOMIC);
> 
> > +               if (!pcs->saved_vals)
> > +                       return -ENOMEM;
> 
> Wouldn't make sense to move it out of the first condition?
> 
> Something like
> 
> if (!foo)
>  foo = ...malloc(...);
> if (!foo)
>  return ...

No, checking for NULL immediately after the allocation is more obvious
and easier to parse.

Johan

WARNING: multiple messages have this Message-ID (diff)
From: johan@kernel.org (Johan Hovold)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH][next] pinctrl: pinctrl-single: add allocation failure checking of saved_vals
Date: Thu, 7 Jun 2018 09:35:43 +0200	[thread overview]
Message-ID: <20180607073543.GP13775@localhost> (raw)
In-Reply-To: <CAHp75Vd0Djw+nDN7u=-CLEfdDGA5QTsMueOb9EZLNnCDgso5fA@mail.gmail.com>

On Wed, Jun 06, 2018 at 07:02:03PM +0300, Andy Shevchenko wrote:
> On Wed, Jun 6, 2018 at 4:43 PM, Colin King <colin.king@canonical.com> wrote:
> > From: Colin Ian King <colin.king@canonical.com>
> >
> > Currently saved_vals is being allocated and there is no check for
> > failed allocation (which is more likely than normal when using
> > GFP_ATOMIC).  Fix this by checking for a failed allocation and
> > propagating this error return down the the caller chain.
> >
> > Detected by CoverityScan, CID#1469841 ("Dereference null return value")
> >
> > Fixes: 88a1dbdec682 ("pinctrl: pinctrl-single: Add functions to save and restore pinctrl context")
> > Signed-off-by: Colin Ian King <colin.king@canonical.com>
> > ---
> >  drivers/pinctrl/pinctrl-single.c | 14 +++++++++++---
> >  1 file changed, 11 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
> > index 9c3c00515aa0..0905ee002041 100644
> > --- a/drivers/pinctrl/pinctrl-single.c
> > +++ b/drivers/pinctrl/pinctrl-single.c
> > @@ -1588,8 +1588,11 @@ static int pcs_save_context(struct pcs_device *pcs)
> >
> >         mux_bytes = pcs->width / BITS_PER_BYTE;
> >
> > -       if (!pcs->saved_vals)
> > +       if (!pcs->saved_vals) {
> >                 pcs->saved_vals = devm_kzalloc(pcs->dev, pcs->size, GFP_ATOMIC);
> 
> > +               if (!pcs->saved_vals)
> > +                       return -ENOMEM;
> 
> Wouldn't make sense to move it out of the first condition?
> 
> Something like
> 
> if (!foo)
>  foo = ...malloc(...);
> if (!foo)
>  return ...

No, checking for NULL immediately after the allocation is more obvious
and easier to parse.

Johan

  reply	other threads:[~2018-06-07  7:35 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-06 13:43 [PATCH][next] pinctrl: pinctrl-single: add allocation failure checking of saved_vals Colin King
2018-06-06 13:43 ` Colin King
2018-06-06 13:43 ` Colin King
2018-06-06 16:02 ` Andy Shevchenko
2018-06-06 16:02   ` Andy Shevchenko
2018-06-06 16:02   ` Andy Shevchenko
2018-06-07  7:35   ` Johan Hovold [this message]
2018-06-07  7:35     ` Johan Hovold
2018-06-07  7:35     ` Johan Hovold
2018-06-07  8:26     ` Colin Ian King
2018-06-07  8:26       ` Colin Ian King
2018-06-07  8:26       ` Colin Ian King
2018-06-07  7:29 ` Johan Hovold
2018-06-07  7:29   ` Johan Hovold
2018-06-07  7:29   ` Johan Hovold
2018-06-08  6:23   ` Tony Lindgren
2018-06-08  6:23     ` Tony Lindgren
2018-06-08  6:23     ` Tony Lindgren
2018-06-14  8:31 ` Linus Walleij
2018-06-14  8:31   ` Linus Walleij
2018-06-14  8:31   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180607073543.GP13775@localhost \
    --to=johan@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.