From: Andrew Randrianasulu <randrianasulu@gmail.com>
To: Bart Van Assche <Bart.VanAssche@wdc.com>
Cc: "rdunlap@infradead.org" <rdunlap@infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
"hch@lst.de" <hch@lst.de>,
"linux-block@vger.kernel.org" <linux-block@vger.kernel.org>
Subject: Re: kernel BUG at drivers/scsi/scsi_error.c:197! - git 4.17.0-x64-08428-g7d3bf613e99a
Date: Wed, 13 Jun 2018 04:28:53 +0300 [thread overview]
Message-ID: <201806130428.54491.randrianasulu@gmail.com> (raw)
In-Reply-To: <40617b19667b3c1302f8a903c19f2fa2f409b12a.camel@wdc.com>
=D0=92 =D1=81=D0=BE=D0=BE=D0=B1=D1=89=D0=B5=D0=BD=D0=B8=D0=B8 =D0=BE=D1=82 =
Tuesday 12 June 2018 18:28:03 Bart Van Assche =D0=BD=D0=B0=D0=BF=D0=B8=D1=
=81=D0=B0=D0=BB(=D0=B0):
> On Sat, 2018-06-09 at 08:02 -0700, Randy Dunlap wrote:
> > On 06/09/2018 06:06 AM, Andrew Randrianasulu wrote:
> > > Hello, everyone!
> > >
> > > I was trying to test not-yet-completed 4.18-rc1, and run into this bu=
g,
> > > probably due to HAL (yes, I still use this) trying to poll empty DVD-=
RW
> > > drive:
> > >
> > > [ 35.040167] ------------[ cut here ]------------
> > > [ 35.040171] kernel BUG at drivers/scsi/scsi_error.c:197!
> > > [ 35.040196] invalid opcode: 0000 [#1] SMP NOPTI
> > > [ 35.040210] CPU: 2 PID: 117 Comm: kworker/2:1H Not tainted
> > > 4.17.0-x64-08428-g7d3bf613e99a-dirty #18
> > > [ 35.040225] Hardware name: MSI MS-7693/970A-G46 (MS-7693), BIOS V2=
=2E8
> > > 01/08/2016
> > > [ 35.040244] Workqueue: kblockd blk_mq_timeout_work
> > > [ 35.040283] RIP: 0010:scsi_times_out+0xe9/0x1a6 [scsi_mod]
> > > [ 35.040287] Code: 03 76 18 48 c7 c2 f9 c2 01 a0 48 89 ee 48 c7 c7 =
14
> > > be 01 a0 31 c0 e8 76 ad 00 00 48 8b 83 98 01 00 00 a8 01 0f 84 a5 00 =
00
> > > 00 <0f> 0b 49 8b 7c 24 38 e8 8f ba 4b e1 41 83 bc 24 2c 01
> > > 00 00 ff 74
> > > [ 35.040312] RSP: 0018:ffffc90000293d98 EFLAGS: 00010202
> > > [ 35.040318] RAX: ffff88031f240605 RBX: ffff88031eed8500 RCX:
> > > 00000000fffefd40 [ 35.040323] RDX: ffffc90000293e80 RSI:
> > > 0000000000002007 RDI: ffff88031eed8638 [ 35.040327] RBP:
> > > ffff88031eed8638 R08: ffff88031eed85d8 R09: 0000000000000000 [ =20
> > > 35.040332] R10: 0000000000000040 R11: fefefefefefefeff R12:
> > > ffff88031f2a8800 [ 35.040336] R13: ffff88031f2a8800 R14:
> > > ffff88031f29e910 R15: 0000000000000001 [ 35.040341] FS:=20
> > > 0000000000000000(0000) GS:ffff88032ed00000(0000) knlGS:00000000000000=
00
> > > [ 35.040346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 35.040350] CR2: 00000000f7ea83c0 CR3: 000000031e194000 CR4:
> > > 00000000000406e0 [ 35.040354] Call Trace:
> > > [ 35.040360] blk_mq_check_expired+0xdc/0x10c
> > > [ 35.040365] bt_iter+0x42/0x45
> > > [ 35.040369] __sbitmap_for_each_set.constprop.12+0x83/0xac
> > > [ 35.040374] ? blk_mq_update_nr_requests+0xad/0xad
> > > [ 35.040595] ? blk_mq_exit_hctx+0xda/0xda
> > > [ 35.041595] blk_mq_queue_tag_busy_iter+0xa3/0xb4
> > > [ 35.042578] ? blk_mq_exit_hctx+0xda/0xda
> > > [ 35.043550] blk_mq_timeout_work+0x6b/0xca
> > > [ 35.044505] process_one_work+0x17c/0x2a6
> > > [ 35.045445] worker_thread+0x19f/0x243
> > > [ 35.046393] ? rescuer_thread+0x262/0x262
> > > [ 35.047346] kthread+0x100/0x108
> > > [ 35.048290] ? kthread_destroy_worker+0x3e/0x3e
> > > [ 35.049242] ret_from_fork+0x27/0x50
> > > [ 35.050192] Modules linked in: bridge stp llc bnep rfcomm hidp
> > > snd_aloop ipv6 pcmcia pcmcia_core xfs libcrc32c lp parport f71882fg
> > > input_leds mousedev hid_generic usbhid hid btusb btintel btbcm btrtl
> > > bluetooth nouveau ecdh_generic rfkill morus1280_sse2 morus1280_glue
> > > morus640_sse2 morus640_glue ttm drm_kms_helper ghash_clmulni_intel drm
> > > crct10dif_pclmul crc32_pclmul drm_panel_orientation_quirks crc32c_int=
el
> > > aegis256_aesni cfbcopyarea fb_sys_fops sysimgblt pcbc sysfillrect
> > > cfbimgblt syscopyarea cfbfillrect aesni_intel glue_helper i2c_algo_bit
> > > crypto_simd aes_x86_64 ohci_pci snd_hda_codec_realtek aegis128l_aesni
> > > pktcdvd aegis128_aesni agpgart ohci_hcd snd_hda_codec_generic cryptd
> > > xhci_pci kvm_amd xhci_hcd ehci_pci snd_hda_intel ehci_hcd snd_hda_cod=
ec
> > > kvm usbcore led_class snd_hda_core video usb_common [ 35.055814]=20
> > > backlight irqbypass fb snd_hwdep snd_pcm mxm_wmi r8169 fbdev mac_hid
> > > fam15h_power k10temp mii snd_timer ccp evdev snd rng_core hwmon wmi
> > > i2c_piix4 sha1_generic sha256_generic button soundcore font sr_mod
> > > acpi_cpufreq rtc_cmos sg i2c_core cdrom edac_mce_amd sd_mod ahci
> > > libahci libata scsi_mod [last unloaded: pcmcia_core]
> > > [ 35.058426] ---[ end trace fdc9e8c678138a75 ]---
> > > [ 35.059725] RIP: 0010:scsi_times_out+0xe9/0x1a6 [scsi_mod]
> > > [ 35.059726] Code: 03 76 18 48 c7 c2 f9 c2 01 a0 48 89 ee 48 c7 c7 =
14
> > > be 01 a0 31 c0 e8 76 ad 00 00 48 8b 83 98 01 00 00 a8 01 0f 84 a5 00 =
00
> > > 00 <0f> 0b 49 8b 7c 24 38 e8 8f ba 4b e1 41 83 bc 24 2c 01 00 00 ff 74
> > > [ 35.063794] RSP: 0018:ffffc90000293d98 EFLAGS: 00010202
> > > [ 35.063796] RAX: ffff88031f240605 RBX: ffff88031eed8500 RCX:
> > > 00000000fffefd40 [ 35.063797] RDX: ffffc90000293e80 RSI:
> > > 0000000000002007 RDI: ffff88031eed8638 [ 35.063798] RBP:
> > > ffff88031eed8638 R08: ffff88031eed85d8 R09: 0000000000000000 [ =20
> > > 35.069198] R10: 0000000000000040 R11: fefefefefefefeff R12:
> > > ffff88031f2a8800 [ 35.069198] R13: ffff88031f2a8800 R14:
> > > ffff88031f29e910 R15: 0000000000000001 [ 35.069200] FS:=20
> > > 0000000000000000(0000) GS:ffff88032ed00000(0000) knlGS:00000000000000=
00
> > > [ 35.073191] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 35.073192] CR2: 00000000f7ea83c0 CR3: 000000031e194000 CR4:
> > > 00000000000406e0
> > >
> > >
> > > and this resulted later on in failure to enter suspend-to-ram:
> > >
> > > [ 181.912985] PM: suspend entry (deep)
> > > [ 181.912993] PM: Syncing filesystems ... done.
> > > [ 182.026561] Freezing user space processes ...
> > > [ 202.029084] Freezing of tasks failed after 20.002 seconds (1 tasks
> > > refusing to freeze, wq_busy=3D0):
> > > [ 202.029106] hald-addon-stor D 0 909 849 0x20020004
> > > [ 202.029113] Call Trace:
> > > [ 202.029128] ? __schedule+0x37f/0x57f
> > > [ 202.029134] ? usleep_range+0x51/0x51
> > > [ 202.029139] schedule+0x7f/0x89
> > > [ 202.029144] schedule_timeout+0x21/0xc7
> > > [ 202.029151] ? check_preempt_curr+0x2e/0x68
> > > [ 202.029157] do_wait_for_common+0x102/0x133
> > > [ 202.029163] ? wake_up_q+0x47/0x47
> > > [ 202.029169] wait_for_common+0x36/0x4e
> > > [ 202.029174] flush_work+0x12e/0x14b
> > > [ 202.029179] ? wake_up_worker+0x25/0x25
> > > [ 202.029185] __cancel_work_timer+0xfb/0x14f
> > > [ 202.029190] ? kobj_lookup+0xfc/0x130
> > > [ 202.029196] disk_block_events+0x5f/0x78
> > > [ 202.029202] __blkdev_get+0xaa/0x3f7
> > > [ 202.029207] blkdev_get+0x83/0x2a3
> > > [ 202.029211] ? bdgrab+0x12/0x17
> > > [ 202.029216] ? bd_acquire+0x3a/0xad
> > > [ 202.029220] ? bd_acquire+0xad/0xad
> > > [ 202.029226] do_dentry_open.isra.22+0x16b/0x22d
> > > [ 202.029232] path_openat+0x98f/0xb27
> > > [ 202.029238] ? _raw_spin_unlock_irqrestore+0x18/0x23
> > > [ 202.029243] do_filp_open+0x4d/0xa3
> > > [ 202.029249] ? __blkdev_put+0x154/0x170
> > > [ 202.029254] ? _cond_resched+0x25/0x29
> > > [ 202.029260] ? slab_pre_alloc_hook+0x2d/0x53
> > > [ 202.029265] ? slab_post_alloc_hook.isra.62+0xa/0x1a
> > > [ 202.029270] ? kmem_cache_alloc+0xa0/0x10b
> > > [ 202.029277] ? do_sys_open+0x6a/0xef
> > > [ 202.029281] do_sys_open+0x6a/0xef
> > > [ 202.029287] do_int80_syscall_32+0x52/0x5f
> > > [ 202.029293] entry_INT80_compat+0x85/0x90
> > > [ 202.029316] OOM killer enabled.
> > > [ 202.029318] Restarting tasks ... done.
> > > [ 202.035210] PM: suspend exit
> > >
> > > full dmesg attached
> >
> > [add linux-scsi m-l]
>
> (added linux-block)
>
> Is this something that happens systematically or sporadically?
> Additionally, have you verified whether or not this can be triggered with
> kernel v4.17? I'm wondering whether or not this is a regression that was
> introduced in the merge window.
same system boots ok with 4.17.1-x64
will re-try mainline git soon ....
>
> Thanks,
>
> Bart.
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Randrianasulu <randrianasulu@gmail.com>
To: Bart Van Assche <Bart.VanAssche@wdc.com>
Cc: "rdunlap@infradead.org" <rdunlap@infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
"hch@lst.de" <hch@lst.de>,
"linux-block@vger.kernel.org" <linux-block@vger.kernel.org>
Subject: Re: kernel BUG at drivers/scsi/scsi_error.c:197! - git 4.17.0-x64-08428-g7d3bf613e99a
Date: Wed, 13 Jun 2018 04:28:53 +0300 [thread overview]
Message-ID: <201806130428.54491.randrianasulu@gmail.com> (raw)
In-Reply-To: <40617b19667b3c1302f8a903c19f2fa2f409b12a.camel@wdc.com>
В сообщении от Tuesday 12 June 2018 18:28:03 Bart Van Assche написал(а):
> On Sat, 2018-06-09 at 08:02 -0700, Randy Dunlap wrote:
> > On 06/09/2018 06:06 AM, Andrew Randrianasulu wrote:
> > > Hello, everyone!
> > >
> > > I was trying to test not-yet-completed 4.18-rc1, and run into this bug,
> > > probably due to HAL (yes, I still use this) trying to poll empty DVD-RW
> > > drive:
> > >
> > > [ 35.040167] ------------[ cut here ]------------
> > > [ 35.040171] kernel BUG at drivers/scsi/scsi_error.c:197!
> > > [ 35.040196] invalid opcode: 0000 [#1] SMP NOPTI
> > > [ 35.040210] CPU: 2 PID: 117 Comm: kworker/2:1H Not tainted
> > > 4.17.0-x64-08428-g7d3bf613e99a-dirty #18
> > > [ 35.040225] Hardware name: MSI MS-7693/970A-G46 (MS-7693), BIOS V2.8
> > > 01/08/2016
> > > [ 35.040244] Workqueue: kblockd blk_mq_timeout_work
> > > [ 35.040283] RIP: 0010:scsi_times_out+0xe9/0x1a6 [scsi_mod]
> > > [ 35.040287] Code: 03 76 18 48 c7 c2 f9 c2 01 a0 48 89 ee 48 c7 c7 14
> > > be 01 a0 31 c0 e8 76 ad 00 00 48 8b 83 98 01 00 00 a8 01 0f 84 a5 00 00
> > > 00 <0f> 0b 49 8b 7c 24 38 e8 8f ba 4b e1 41 83 bc 24 2c 01
> > > 00 00 ff 74
> > > [ 35.040312] RSP: 0018:ffffc90000293d98 EFLAGS: 00010202
> > > [ 35.040318] RAX: ffff88031f240605 RBX: ffff88031eed8500 RCX:
> > > 00000000fffefd40 [ 35.040323] RDX: ffffc90000293e80 RSI:
> > > 0000000000002007 RDI: ffff88031eed8638 [ 35.040327] RBP:
> > > ffff88031eed8638 R08: ffff88031eed85d8 R09: 0000000000000000 [
> > > 35.040332] R10: 0000000000000040 R11: fefefefefefefeff R12:
> > > ffff88031f2a8800 [ 35.040336] R13: ffff88031f2a8800 R14:
> > > ffff88031f29e910 R15: 0000000000000001 [ 35.040341] FS:
> > > 0000000000000000(0000) GS:ffff88032ed00000(0000) knlGS:0000000000000000
> > > [ 35.040346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 35.040350] CR2: 00000000f7ea83c0 CR3: 000000031e194000 CR4:
> > > 00000000000406e0 [ 35.040354] Call Trace:
> > > [ 35.040360] blk_mq_check_expired+0xdc/0x10c
> > > [ 35.040365] bt_iter+0x42/0x45
> > > [ 35.040369] __sbitmap_for_each_set.constprop.12+0x83/0xac
> > > [ 35.040374] ? blk_mq_update_nr_requests+0xad/0xad
> > > [ 35.040595] ? blk_mq_exit_hctx+0xda/0xda
> > > [ 35.041595] blk_mq_queue_tag_busy_iter+0xa3/0xb4
> > > [ 35.042578] ? blk_mq_exit_hctx+0xda/0xda
> > > [ 35.043550] blk_mq_timeout_work+0x6b/0xca
> > > [ 35.044505] process_one_work+0x17c/0x2a6
> > > [ 35.045445] worker_thread+0x19f/0x243
> > > [ 35.046393] ? rescuer_thread+0x262/0x262
> > > [ 35.047346] kthread+0x100/0x108
> > > [ 35.048290] ? kthread_destroy_worker+0x3e/0x3e
> > > [ 35.049242] ret_from_fork+0x27/0x50
> > > [ 35.050192] Modules linked in: bridge stp llc bnep rfcomm hidp
> > > snd_aloop ipv6 pcmcia pcmcia_core xfs libcrc32c lp parport f71882fg
> > > input_leds mousedev hid_generic usbhid hid btusb btintel btbcm btrtl
> > > bluetooth nouveau ecdh_generic rfkill morus1280_sse2 morus1280_glue
> > > morus640_sse2 morus640_glue ttm drm_kms_helper ghash_clmulni_intel drm
> > > crct10dif_pclmul crc32_pclmul drm_panel_orientation_quirks crc32c_intel
> > > aegis256_aesni cfbcopyarea fb_sys_fops sysimgblt pcbc sysfillrect
> > > cfbimgblt syscopyarea cfbfillrect aesni_intel glue_helper i2c_algo_bit
> > > crypto_simd aes_x86_64 ohci_pci snd_hda_codec_realtek aegis128l_aesni
> > > pktcdvd aegis128_aesni agpgart ohci_hcd snd_hda_codec_generic cryptd
> > > xhci_pci kvm_amd xhci_hcd ehci_pci snd_hda_intel ehci_hcd snd_hda_codec
> > > kvm usbcore led_class snd_hda_core video usb_common [ 35.055814]
> > > backlight irqbypass fb snd_hwdep snd_pcm mxm_wmi r8169 fbdev mac_hid
> > > fam15h_power k10temp mii snd_timer ccp evdev snd rng_core hwmon wmi
> > > i2c_piix4 sha1_generic sha256_generic button soundcore font sr_mod
> > > acpi_cpufreq rtc_cmos sg i2c_core cdrom edac_mce_amd sd_mod ahci
> > > libahci libata scsi_mod [last unloaded: pcmcia_core]
> > > [ 35.058426] ---[ end trace fdc9e8c678138a75 ]---
> > > [ 35.059725] RIP: 0010:scsi_times_out+0xe9/0x1a6 [scsi_mod]
> > > [ 35.059726] Code: 03 76 18 48 c7 c2 f9 c2 01 a0 48 89 ee 48 c7 c7 14
> > > be 01 a0 31 c0 e8 76 ad 00 00 48 8b 83 98 01 00 00 a8 01 0f 84 a5 00 00
> > > 00 <0f> 0b 49 8b 7c 24 38 e8 8f ba 4b e1 41 83 bc 24 2c 01 00 00 ff 74
> > > [ 35.063794] RSP: 0018:ffffc90000293d98 EFLAGS: 00010202
> > > [ 35.063796] RAX: ffff88031f240605 RBX: ffff88031eed8500 RCX:
> > > 00000000fffefd40 [ 35.063797] RDX: ffffc90000293e80 RSI:
> > > 0000000000002007 RDI: ffff88031eed8638 [ 35.063798] RBP:
> > > ffff88031eed8638 R08: ffff88031eed85d8 R09: 0000000000000000 [
> > > 35.069198] R10: 0000000000000040 R11: fefefefefefefeff R12:
> > > ffff88031f2a8800 [ 35.069198] R13: ffff88031f2a8800 R14:
> > > ffff88031f29e910 R15: 0000000000000001 [ 35.069200] FS:
> > > 0000000000000000(0000) GS:ffff88032ed00000(0000) knlGS:0000000000000000
> > > [ 35.073191] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 35.073192] CR2: 00000000f7ea83c0 CR3: 000000031e194000 CR4:
> > > 00000000000406e0
> > >
> > >
> > > and this resulted later on in failure to enter suspend-to-ram:
> > >
> > > [ 181.912985] PM: suspend entry (deep)
> > > [ 181.912993] PM: Syncing filesystems ... done.
> > > [ 182.026561] Freezing user space processes ...
> > > [ 202.029084] Freezing of tasks failed after 20.002 seconds (1 tasks
> > > refusing to freeze, wq_busy=0):
> > > [ 202.029106] hald-addon-stor D 0 909 849 0x20020004
> > > [ 202.029113] Call Trace:
> > > [ 202.029128] ? __schedule+0x37f/0x57f
> > > [ 202.029134] ? usleep_range+0x51/0x51
> > > [ 202.029139] schedule+0x7f/0x89
> > > [ 202.029144] schedule_timeout+0x21/0xc7
> > > [ 202.029151] ? check_preempt_curr+0x2e/0x68
> > > [ 202.029157] do_wait_for_common+0x102/0x133
> > > [ 202.029163] ? wake_up_q+0x47/0x47
> > > [ 202.029169] wait_for_common+0x36/0x4e
> > > [ 202.029174] flush_work+0x12e/0x14b
> > > [ 202.029179] ? wake_up_worker+0x25/0x25
> > > [ 202.029185] __cancel_work_timer+0xfb/0x14f
> > > [ 202.029190] ? kobj_lookup+0xfc/0x130
> > > [ 202.029196] disk_block_events+0x5f/0x78
> > > [ 202.029202] __blkdev_get+0xaa/0x3f7
> > > [ 202.029207] blkdev_get+0x83/0x2a3
> > > [ 202.029211] ? bdgrab+0x12/0x17
> > > [ 202.029216] ? bd_acquire+0x3a/0xad
> > > [ 202.029220] ? bd_acquire+0xad/0xad
> > > [ 202.029226] do_dentry_open.isra.22+0x16b/0x22d
> > > [ 202.029232] path_openat+0x98f/0xb27
> > > [ 202.029238] ? _raw_spin_unlock_irqrestore+0x18/0x23
> > > [ 202.029243] do_filp_open+0x4d/0xa3
> > > [ 202.029249] ? __blkdev_put+0x154/0x170
> > > [ 202.029254] ? _cond_resched+0x25/0x29
> > > [ 202.029260] ? slab_pre_alloc_hook+0x2d/0x53
> > > [ 202.029265] ? slab_post_alloc_hook.isra.62+0xa/0x1a
> > > [ 202.029270] ? kmem_cache_alloc+0xa0/0x10b
> > > [ 202.029277] ? do_sys_open+0x6a/0xef
> > > [ 202.029281] do_sys_open+0x6a/0xef
> > > [ 202.029287] do_int80_syscall_32+0x52/0x5f
> > > [ 202.029293] entry_INT80_compat+0x85/0x90
> > > [ 202.029316] OOM killer enabled.
> > > [ 202.029318] Restarting tasks ... done.
> > > [ 202.035210] PM: suspend exit
> > >
> > > full dmesg attached
> >
> > [add linux-scsi m-l]
>
> (added linux-block)
>
> Is this something that happens systematically or sporadically?
> Additionally, have you verified whether or not this can be triggered with
> kernel v4.17? I'm wondering whether or not this is a regression that was
> introduced in the merge window.
same system boots ok with 4.17.1-x64
will re-try mainline git soon ....
>
> Thanks,
>
> Bart.
next prev parent reply other threads:[~2018-06-13 1:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-09 13:06 kernel BUG at drivers/scsi/scsi_error.c:197! - git 4.17.0-x64-08428-g7d3bf613e99a Andrew Randrianasulu
2018-06-09 15:02 ` Randy Dunlap
2018-06-12 15:28 ` Bart Van Assche
2018-06-12 15:28 ` Bart Van Assche
2018-06-13 1:28 ` Andrew Randrianasulu [this message]
2018-06-13 1:28 ` Andrew Randrianasulu
2018-06-13 4:03 ` jianchao.wang
2018-06-13 4:03 ` jianchao.wang
2018-06-13 7:38 ` Andrew Randrianasulu
2018-06-13 14:04 ` hch
2018-06-13 14:08 ` Bart Van Assche
2018-06-13 14:08 ` Bart Van Assche
2018-06-13 14:35 ` hch
2018-06-13 14:35 ` hch
2018-06-14 7:49 ` jianchao.wang
2018-06-14 7:49 ` jianchao.wang
2018-06-14 8:32 ` hch
2018-06-14 3:12 ` jianchao.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201806130428.54491.randrianasulu@gmail.com \
--to=randrianasulu@gmail.com \
--cc=Bart.VanAssche@wdc.com \
--cc=hch@lst.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=rdunlap@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.