From: David Lechner <david@lechnology.com>
To: linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: "David Lechner" <david@lechnology.com>,
"Ohad Ben-Cohen" <ohad@wizery.com>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Sekhar Nori" <nsekhar@ti.com>,
"Kevin Hilman" <khilman@kernel.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/8] ARM: OMAP2+: add pdata quirks for PRUSS reset
Date: Sat, 23 Jun 2018 16:08:05 -0500 [thread overview]
Message-ID: <20180623210810.21232-4-david@lechnology.com> (raw)
In-Reply-To: <20180623210810.21232-1-david@lechnology.com>
This adds platform data for the PRUSS reset on OMAP2+. This is following
the pattern used by several other platform devices on these SoCs since
there is not a proper reset controller.
Signed-off-by: David Lechner <david@lechnology.com>
---
arch/arm/mach-omap2/pdata-quirks.c | 9 +++++++++
include/linux/platform_data/ti-pruss.h | 18 ++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 include/linux/platform_data/ti-pruss.h
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 7f02743edbe4..8ea35d6cded5 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -25,6 +25,7 @@
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/ti-sysc.h>
+#include <linux/platform_data/ti-pruss.h>
#include <linux/platform_data/wkup_m3.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
@@ -424,6 +425,12 @@ static struct wkup_m3_platform_data wkup_m3_data = {
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
+
+static struct ti_pruss_platform_data pruss_data = {
+ .reset_name = "pruss",
+ .assert_reset = omap_device_assert_hardreset,
+ .deassert_reset = omap_device_deassert_hardreset,
+};
#endif
#ifdef CONFIG_SOC_OMAP5
@@ -568,6 +575,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
#ifdef CONFIG_SOC_AM33XX
OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
+ OF_DEV_AUXDATA("ti,am3352-pru-rproc", 0x4a300000, "4a300000.cpu",
+ &pruss_data),
#endif
#ifdef CONFIG_SOC_AM43XX
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
diff --git a/include/linux/platform_data/ti-pruss.h b/include/linux/platform_data/ti-pruss.h
new file mode 100644
index 000000000000..e401e621ebdf
--- /dev/null
+++ b/include/linux/platform_data/ti-pruss.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI PRU remote processor platform data
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_TI_PRU_H
+#define _LINUX_PLATFORM_DATA_TI_PRU_H
+
+struct platform_device;
+
+struct ti_pruss_platform_data {
+ const char *reset_name;
+
+ int (*assert_reset)(struct platform_device *pdev, const char *name);
+ int (*deassert_reset)(struct platform_device *pdev, const char *name);
+};
+
+#endif /* _LINUX_PLATFORM_DATA_TI_PRU_H */
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: david@lechnology.com (David Lechner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] ARM: OMAP2+: add pdata quirks for PRUSS reset
Date: Sat, 23 Jun 2018 16:08:05 -0500 [thread overview]
Message-ID: <20180623210810.21232-4-david@lechnology.com> (raw)
In-Reply-To: <20180623210810.21232-1-david@lechnology.com>
This adds platform data for the PRUSS reset on OMAP2+. This is following
the pattern used by several other platform devices on these SoCs since
there is not a proper reset controller.
Signed-off-by: David Lechner <david@lechnology.com>
---
arch/arm/mach-omap2/pdata-quirks.c | 9 +++++++++
include/linux/platform_data/ti-pruss.h | 18 ++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 include/linux/platform_data/ti-pruss.h
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 7f02743edbe4..8ea35d6cded5 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -25,6 +25,7 @@
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/ti-sysc.h>
+#include <linux/platform_data/ti-pruss.h>
#include <linux/platform_data/wkup_m3.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
@@ -424,6 +425,12 @@ static struct wkup_m3_platform_data wkup_m3_data = {
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
+
+static struct ti_pruss_platform_data pruss_data = {
+ .reset_name = "pruss",
+ .assert_reset = omap_device_assert_hardreset,
+ .deassert_reset = omap_device_deassert_hardreset,
+};
#endif
#ifdef CONFIG_SOC_OMAP5
@@ -568,6 +575,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
#ifdef CONFIG_SOC_AM33XX
OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
+ OF_DEV_AUXDATA("ti,am3352-pru-rproc", 0x4a300000, "4a300000.cpu",
+ &pruss_data),
#endif
#ifdef CONFIG_SOC_AM43XX
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
diff --git a/include/linux/platform_data/ti-pruss.h b/include/linux/platform_data/ti-pruss.h
new file mode 100644
index 000000000000..e401e621ebdf
--- /dev/null
+++ b/include/linux/platform_data/ti-pruss.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI PRU remote processor platform data
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_TI_PRU_H
+#define _LINUX_PLATFORM_DATA_TI_PRU_H
+
+struct platform_device;
+
+struct ti_pruss_platform_data {
+ const char *reset_name;
+
+ int (*assert_reset)(struct platform_device *pdev, const char *name);
+ int (*deassert_reset)(struct platform_device *pdev, const char *name);
+};
+
+#endif /* _LINUX_PLATFORM_DATA_TI_PRU_H */
--
2.17.1
next prev parent reply other threads:[~2018-06-23 21:08 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-23 21:08 (unknown), David Lechner
2018-06-23 21:08 ` No subject David Lechner
2018-06-23 21:08 ` David Lechner
2018-06-23 21:08 ` [PATCH 1/8] remoteproc: add map parameter to da_to_va David Lechner
2018-06-23 21:08 ` David Lechner
2018-06-23 21:08 ` [PATCH 2/8] remoteproc: add page lookup for TI PRU to ELF loader David Lechner
2018-06-23 21:08 ` David Lechner
2018-06-23 21:08 ` David Lechner
2018-06-23 21:08 ` David Lechner [this message]
2018-06-23 21:08 ` [PATCH 3/8] ARM: OMAP2+: add pdata quirks for PRUSS reset David Lechner
2018-06-23 21:08 ` [PATCH 4/8] dt-bindings: add bindings for TI PRU as remoteproc David Lechner
2018-06-23 21:08 ` David Lechner
2018-07-03 20:59 ` Rob Herring
2018-07-03 20:59 ` Rob Herring
2018-06-23 21:08 ` [PATCH 5/8] remoteproc: new driver for TI PRU David Lechner
2018-06-23 21:08 ` David Lechner
2018-06-29 10:14 ` Roger Quadros
2018-06-29 10:14 ` Roger Quadros
2018-06-30 19:02 ` Derald Woods
2018-07-02 8:05 ` Roger Quadros
2018-07-02 8:05 ` Roger Quadros
2018-06-23 21:08 ` [PATCH 6/8] ARM: davinci_all_defconfig: enable PRU remoteproc module David Lechner
2018-06-23 21:08 ` David Lechner
2018-06-23 21:08 ` [PATCH 7/8] ARM: dts: da850: add node for PRUSS David Lechner
2018-06-23 21:08 ` David Lechner
2018-06-23 21:08 ` [PATCH 8/8] ARM: dts: am33xx: add node for PRU remoteproc David Lechner
2018-06-23 21:08 ` David Lechner
2018-06-29 9:58 ` New remoteproc driver for TI PRU Roger Quadros
2018-06-29 17:44 ` David Lechner
2018-06-29 17:44 ` David Lechner
2018-06-30 0:17 ` Suman Anna
2018-06-30 0:17 ` Suman Anna
2018-06-30 0:17 ` Suman Anna
2018-08-06 16:32 ` David Lechner
2018-08-06 16:32 ` David Lechner
2018-08-07 1:39 ` Suman Anna
2018-08-07 1:39 ` Suman Anna
2018-08-07 1:39 ` Suman Anna
2018-07-02 8:17 ` Roger Quadros
2018-07-02 8:17 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180623210810.21232-4-david@lechnology.com \
--to=david@lechnology.com \
--cc=bcousson@baylibre.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.