From: miquel.raynal@bootlin.com (Miquel Raynal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 12/17] irqchip/irq-mvebu-icu: add support for System Error Interrupts (SEI)
Date: Thu, 28 Jun 2018 19:12:19 +0200 [thread overview]
Message-ID: <20180628191219.51c84ecd@xps13> (raw)
In-Reply-To: <1bf99f2c-6cff-f5ee-4aa9-b122d1b4437a@arm.com>
Hi Marc,
Marc Zyngier <marc.zyngier@arm.com> wrote on Thu, 28 Jun 2018 17:49:55
+0100:
> On 22/06/18 16:14, Miquel Raynal wrote:
> > An SEI driver provides an MSI domain through which it is possible to
> > raise SEIs.
> >
> > Handle the NSR probe function in a more generic way to support other
> > type of interrupts (ie. the SEIs).
> >
> > For clarity we do not use tree IRQ domains for now but linear ones
> > instead, allocating the 207 ICU lines for each interrupt group.
>
> Is that still the truth? or just a stale comment?
Stale comment, will remove it.
>
> > Reallocating an ICU slot is prevented by the use of an ICU-wide bitmap.
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > ---
> > drivers/irqchip/irq-mvebu-icu.c | 152 ++++++++++++++++++++++++++++++++++------
> > 1 file changed, 129 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c
> > index f7c2ede9c222..bec506f0b1a9 100644
> > --- a/drivers/irqchip/irq-mvebu-icu.c
> > +++ b/drivers/irqchip/irq-mvebu-icu.c
> > @@ -28,6 +28,10 @@
> > #define ICU_SETSPI_NSR_AH 0x14
> > #define ICU_CLRSPI_NSR_AL 0x18
> > #define ICU_CLRSPI_NSR_AH 0x1c
> > +#define ICU_SET_SEI_AL 0x50
> > +#define ICU_SET_SEI_AH 0x54
> > +#define ICU_CLR_SEI_AL 0x58
> > +#define ICU_CLR_SEI_AH 0x5C
> > #define ICU_INT_CFG(x) (0x100 + 4 * (x))
> > #define ICU_INT_ENABLE BIT(24)
> > #define ICU_IS_EDGE BIT(28)
> > @@ -38,12 +42,28 @@
> > #define ICU_SATA0_ICU_ID 109
> > #define ICU_SATA1_ICU_ID 107
> >
> > +struct mvebu_icu_subset_data {
> > + unsigned int icu_group;
> > + unsigned int offset_set_ah;
> > + unsigned int offset_set_al;
> > + unsigned int offset_clr_ah;
> > + unsigned int offset_clr_al;
> > +};
> > +
> > struct mvebu_icu {
> > struct irq_chip irq_chip;
> > struct regmap *regmap;
> > struct device *dev;
> > - atomic_t initialized;
> > bool legacy_bindings;
> > + /* Lock on interrupt allocations/releases */
> > + struct mutex msi_lock;
> > + DECLARE_BITMAP(msi_bitmap, ICU_MAX_IRQS);
> > +};
> > +
> > +struct mvebu_icu_msi_data {
> > + struct mvebu_icu *icu;
> > + atomic_t initialized;
> > + const struct mvebu_icu_subset_data *subset_data;
>
> I'm a bit lost here. Can you have more than a single mvebu_icu_msi_data
> per subset_data? I though you'd only have one. If so, what's the benefit
> of having a separate structure? Am I missing something?
The reason for having a pointer on another structure is because I use
of_device_get_match_data() to retrieve a different structure per compatible
(ie. per subset).
>
> > };
> >
> > struct mvebu_icu_irq_data {
> > @@ -76,16 +96,25 @@ static struct mvebu_icu *mvebu_icu_dev_get_drvdata(struct platform_device *pdev)
> > return icu;
> > }
> >
> > -static void mvebu_icu_init(struct mvebu_icu *icu, struct msi_msg *msg)
> > +static void mvebu_icu_init(struct mvebu_icu *icu, struct irq_domain *d,
> > + struct msi_msg *msg)
> > {
> > - if (atomic_cmpxchg(&icu->initialized, false, true))
> > + struct mvebu_icu_msi_data *msi_data = platform_msi_get_host_data(d);
> > + const struct mvebu_icu_subset_data *subset = msi_data->subset_data;
>
> Since you don't use the domain for anything else than obtaining the
> subset_data, why don't you directly pass that subset_data as a
> parameter? Here, you are mixing two different abstraction levels, and
> that makes the whole thing really bizarre.
Indeed. Will edit this.
>
> > +
> > + if (atomic_cmpxchg(&msi_data->initialized, false, true))
> > + return;
> > +
> > + /* Set 'SET' ICU SPI message address in AP */
> > + regmap_write(icu->regmap, subset->offset_set_ah, msg[0].address_hi);
> > + regmap_write(icu->regmap, subset->offset_set_al, msg[0].address_lo);
> > +
> > + if (subset->icu_group != ICU_GRP_NSR)
> > return;
> >
> > - /* Set Clear/Set ICU SPI message address in AP */
> > - regmap_write(icu->regmap, ICU_SETSPI_NSR_AH, msg[0].address_hi);
> > - regmap_write(icu->regmap, ICU_SETSPI_NSR_AL, msg[0].address_lo);
> > - regmap_write(icu->regmap, ICU_CLRSPI_NSR_AH, msg[1].address_hi);
> > - regmap_write(icu->regmap, ICU_CLRSPI_NSR_AL, msg[1].address_lo);
> > + /* Set 'CLEAR' ICU SPI message address in AP (level-MSI only) */
> > + regmap_write(icu->regmap, subset->offset_clr_ah, msg[1].address_hi);
> > + regmap_write(icu->regmap, subset->offset_clr_al, msg[1].address_lo);
> > }
> >
> > static void mvebu_icu_write_msg(struct msi_desc *desc, struct msi_msg *msg)
> > @@ -96,8 +125,8 @@ static void mvebu_icu_write_msg(struct msi_desc *desc, struct msi_msg *msg)
> > unsigned int icu_int;
> >
> > if (msg->address_lo || msg->address_hi) {
> > - /* One off initialization */
> > - mvebu_icu_init(icu, msg);
> > + /* One off initialization per domain */
> > + mvebu_icu_init(icu, d->domain, msg);
> > /* Configure the ICU with irq number & type */
> > icu_int = msg->data | ICU_INT_ENABLE;
> > if (icu_irqd->type & IRQ_TYPE_EDGE_RISING)
> > @@ -131,7 +160,8 @@ static int
> > mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> > unsigned long *hwirq, unsigned int *type)
> > {
> > - struct mvebu_icu *icu = platform_msi_get_host_data(d);
> > + struct mvebu_icu_msi_data *msi_data = platform_msi_get_host_data(d);
> > + struct mvebu_icu *icu = msi_data->icu;
> > unsigned int param_count = icu->legacy_bindings ? 3 : 2;
> >
> > /* Check the count of the parameters in dt */
> > @@ -143,7 +173,7 @@ mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> >
> > if (icu->legacy_bindings) {
> > *hwirq = fwspec->param[1];
> > - *type = fwspec->param[2];
> > + *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
> > if (fwspec->param[0] != ICU_GRP_NSR) {
> > dev_err(icu->dev, "wrong ICU group type %x\n",
> > fwspec->param[0]);
> > @@ -151,7 +181,7 @@ mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> > }
> > } else {
> > *hwirq = fwspec->param[0];
> > - *type = fwspec->param[1];
> > + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> > }
> >
> > if (*hwirq >= ICU_MAX_IRQS) {
> > @@ -159,12 +189,36 @@ mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> > return -EINVAL;
> > }
> >
> > - /* Mask the type to prevent wrong DT configuration */
> > - *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
> > + /*
> > + * The ICU receives level-interrupts. MSI SEI are
> > + * edge-interrupts while MSI NSR are level-interrupts. Update the type
> > + * accordingly for the parent irqchip.
> > + */
> > + if (msi_data->subset_data->icu_group == ICU_GRP_SEI)
> > + *type = IRQ_TYPE_EDGE_RISING;
> >
> > return 0;
> > }
> >
> > +static int mvebu_icu_msi_bitmap_region_alloc(struct mvebu_icu *icu, int hwirq)
> > +{
> > + int ret;
> > +
> > + mutex_lock(&icu->msi_lock);
> > + ret = bitmap_allocate_region(icu->msi_bitmap, hwirq, 0);
> > + mutex_unlock(&icu->msi_lock);
> > +
> > + return ret;
> > +}
> > +
> > +static void mvebu_icu_msi_bitmap_region_release(struct mvebu_icu *icu,
> > + int hwirq)
> > +{
> > + mutex_lock(&icu->msi_lock);
> > + bitmap_release_region(icu->msi_bitmap, hwirq, 0);
> > + mutex_unlock(&icu->msi_lock);
> > +}
> > +
> > static int
> > mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> > unsigned int nr_irqs, void *args)
> > @@ -172,7 +226,9 @@ mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> > int err;
> > unsigned long hwirq;
> > struct irq_fwspec *fwspec = args;
> > - struct mvebu_icu *icu = platform_msi_get_host_data(domain);
> > + struct mvebu_icu_msi_data *msi_data =
> > + platform_msi_get_host_data(domain);
> > + struct mvebu_icu *icu = msi_data->icu;
> > struct mvebu_icu_irq_data *icu_irqd;
> >
> > icu_irqd = kmalloc(sizeof(*icu_irqd), GFP_KERNEL);
> > @@ -186,16 +242,20 @@ mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> > goto free_irqd;
> > }
> >
> > + err = mvebu_icu_msi_bitmap_region_alloc(icu, hwirq);
> > + if (err)
> > + goto free_irqd;
> > +
> > if (icu->legacy_bindings)
> > icu_irqd->icu_group = fwspec->param[0];
> > else
> > - icu_irqd->icu_group = ICU_GRP_NSR;
> > + icu_irqd->icu_group = msi_data->subset_data->icu_group;
> > icu_irqd->icu = icu;
> >
> > err = platform_msi_domain_alloc(domain, virq, nr_irqs);
> > if (err) {
> > dev_err(icu->dev, "failed to allocate ICU interrupt in parent domain\n");
> > - goto free_irqd;
> > + goto free_bitmap;
> > }
> >
> > /* Make sure there is no interrupt left pending by the firmware */
> > @@ -214,6 +274,8 @@ mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> >
> > free_msi:
> > platform_msi_domain_free(domain, virq, nr_irqs);
> > +free_bitmap:
> > + mvebu_icu_msi_bitmap_region_release(icu, hwirq);
> > free_irqd:
> > kfree(icu_irqd);
> > return err;
> > @@ -223,12 +285,17 @@ static void
> > mvebu_icu_irq_domain_free(struct irq_domain *domain, unsigned int virq,
> > unsigned int nr_irqs)
> > {
> > + struct mvebu_icu_msi_data *msi_data =
> > + platform_msi_get_host_data(domain);
> > + struct mvebu_icu *icu = msi_data->icu;
> > struct irq_data *d = irq_get_irq_data(virq);
> > struct mvebu_icu_irq_data *icu_irqd = d->chip_data;
> >
> > kfree(icu_irqd);
> >
> > platform_msi_domain_free(domain, virq, nr_irqs);
> > +
> > + mvebu_icu_msi_bitmap_region_release(icu, d->hwirq);
> > }
> >
> > static const struct irq_domain_ops mvebu_icu_domain_ops = {
> > @@ -239,14 +306,29 @@ static const struct irq_domain_ops mvebu_icu_domain_ops = {
> >
> > static int mvebu_icu_subset_probe(struct platform_device *pdev)
> > {
> > + const struct mvebu_icu_subset_data *subset;
> > + struct mvebu_icu_msi_data *msi_data;
> > struct device_node *msi_parent_dn;
> > struct irq_domain *irq_domain;
> > struct mvebu_icu *icu;
> >
> > + msi_data = devm_kzalloc(&pdev->dev, sizeof(*msi_data), GFP_KERNEL);
> > + if (!msi_data)
> > + return -ENOMEM;
> > +
> > icu = mvebu_icu_dev_get_drvdata(pdev);
> > if (IS_ERR(icu))
> > return PTR_ERR(icu);
> >
> > + subset = of_device_get_match_data(&pdev->dev);
> > + if (!subset) {
> > + dev_err(&pdev->dev, "Could not retrieve subset data\n");
> > + return -EINVAL;
> > + }
> > +
> > + msi_data->icu = icu;
> > + msi_data->subset_data = subset;
> > +
> > pdev->dev.msi_domain = of_msi_get_domain(&pdev->dev, pdev->dev.of_node,
> > DOMAIN_BUS_PLATFORM_MSI);
> > if (!pdev->dev.msi_domain)
> > @@ -256,10 +338,10 @@ static int mvebu_icu_subset_probe(struct platform_device *pdev)
> > if (!msi_parent_dn)
> > return -ENODEV;
> >
> > - irq_domain = platform_msi_create_device_domain(&pdev->dev, ICU_MAX_IRQS,
> > + irq_domain = platform_msi_create_device_domain(&pdev->dev, 0,
> > mvebu_icu_write_msg,
> > &mvebu_icu_domain_ops,
> > - icu);
> > + msi_data);
> > if (!irq_domain) {
> > dev_err(&pdev->dev, "Failed to create ICU MSI domain\n");
> > return -ENOMEM;
> > @@ -268,9 +350,28 @@ static int mvebu_icu_subset_probe(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static const struct mvebu_icu_subset_data mvebu_icu_nsr_subset_data = {
> > + .icu_group = ICU_GRP_NSR,
> > + .offset_set_ah = ICU_SETSPI_NSR_AH,
> > + .offset_set_al = ICU_SETSPI_NSR_AL,
> > + .offset_clr_ah = ICU_CLRSPI_NSR_AH,
> > + .offset_clr_al = ICU_CLRSPI_NSR_AL,
> > +};
> > +
> > +static const struct mvebu_icu_subset_data mvebu_icu_sei_subset_data = {
> > + .icu_group = ICU_GRP_SEI,
> > + .offset_set_ah = ICU_SET_SEI_AH,
> > + .offset_set_al = ICU_SET_SEI_AL,
> > +};
> > +
> > static const struct of_device_id mvebu_icu_subset_of_match[] = {
> > {
> > .compatible = "marvell,cp110-icu-nsr",
> > + .data = &mvebu_icu_nsr_subset_data,
> > + },
> > + {
> > + .compatible = "marvell,cp110-icu-sei",
> > + .data = &mvebu_icu_sei_subset_data,
> > },
> > {},
> > };
> > @@ -317,6 +418,8 @@ static int mvebu_icu_probe(struct platform_device *pdev)
> > if (IS_ERR(icu->regmap))
> > return PTR_ERR(icu->regmap);
> >
> > + mutex_init(&icu->msi_lock);
> > +
> > icu->irq_chip.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
> > "ICU.%x",
> > (unsigned int)res->start);
> > @@ -341,7 +444,7 @@ static int mvebu_icu_probe(struct platform_device *pdev)
> > #endif
> >
> > /*
> > - * Clean all ICU interrupts with type SPI_NSR, required to
> > + * Clean all ICU interrupts of type NSR and SEI, required to
> > * avoid unpredictable SPI assignments done by firmware.
> > */
> > for (i = 0 ; i < ICU_MAX_IRQS ; i++) {
> > @@ -350,7 +453,8 @@ static int mvebu_icu_probe(struct platform_device *pdev)
> > regmap_read(icu->regmap, ICU_INT_CFG(i), &icu_int);
> > icu_grp = icu_int >> ICU_GROUP_SHIFT;
> >
> > - if (icu_grp == ICU_GRP_NSR)
> > + if (icu_grp == ICU_GRP_NSR ||
> > + (icu_grp == ICU_GRP_SEI && !icu->legacy_bindings))
> > regmap_write(icu->regmap, ICU_INT_CFG(i), 0);
> > }
> >
> > @@ -363,7 +467,9 @@ static int mvebu_icu_probe(struct platform_device *pdev)
> > }
> >
> > static const struct of_device_id mvebu_icu_of_match[] = {
> > - { .compatible = "marvell,cp110-icu", },
> > + {
> > + .compatible = "marvell,cp110-icu",
> > + },
> > {},
> > };
> >
> >
>
> I'm close to loosing the plot with this driver, so I'll stop here and
> see what you have to say... ;-)
I'll check your previous comments tomorrow, I'll probably have a few
questions. Thanks for reviewing :-)
Regards,
Miqu?l
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>, Andrew Lunn <andrew@lunn.ch>,
Jason Cooper <jason@lakedaemon.net>,
devicetree@vger.kernel.org,
Antoine Tenart <antoine.tenart@bootlin.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Gregory Clement <gregory.clement@bootlin.com>,
Haim Boot <hayim@marvell.com>, Will Deacon <will.deacon@arm.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Nadav Haklai <nadavh@marvell.com>,
Rob Herring <robh+dt@kernel.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Thomas Gleixner <tglx@linutronix.de>,
Hanna Hawa <hannah@marvell.com>,
linux-arm-kernel@lists.infradead.org,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Subject: Re: [PATCH v3 12/17] irqchip/irq-mvebu-icu: add support for System Error Interrupts (SEI)
Date: Thu, 28 Jun 2018 19:12:19 +0200 [thread overview]
Message-ID: <20180628191219.51c84ecd@xps13> (raw)
In-Reply-To: <1bf99f2c-6cff-f5ee-4aa9-b122d1b4437a@arm.com>
Hi Marc,
Marc Zyngier <marc.zyngier@arm.com> wrote on Thu, 28 Jun 2018 17:49:55
+0100:
> On 22/06/18 16:14, Miquel Raynal wrote:
> > An SEI driver provides an MSI domain through which it is possible to
> > raise SEIs.
> >
> > Handle the NSR probe function in a more generic way to support other
> > type of interrupts (ie. the SEIs).
> >
> > For clarity we do not use tree IRQ domains for now but linear ones
> > instead, allocating the 207 ICU lines for each interrupt group.
>
> Is that still the truth? or just a stale comment?
Stale comment, will remove it.
>
> > Reallocating an ICU slot is prevented by the use of an ICU-wide bitmap.
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > ---
> > drivers/irqchip/irq-mvebu-icu.c | 152 ++++++++++++++++++++++++++++++++++------
> > 1 file changed, 129 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c
> > index f7c2ede9c222..bec506f0b1a9 100644
> > --- a/drivers/irqchip/irq-mvebu-icu.c
> > +++ b/drivers/irqchip/irq-mvebu-icu.c
> > @@ -28,6 +28,10 @@
> > #define ICU_SETSPI_NSR_AH 0x14
> > #define ICU_CLRSPI_NSR_AL 0x18
> > #define ICU_CLRSPI_NSR_AH 0x1c
> > +#define ICU_SET_SEI_AL 0x50
> > +#define ICU_SET_SEI_AH 0x54
> > +#define ICU_CLR_SEI_AL 0x58
> > +#define ICU_CLR_SEI_AH 0x5C
> > #define ICU_INT_CFG(x) (0x100 + 4 * (x))
> > #define ICU_INT_ENABLE BIT(24)
> > #define ICU_IS_EDGE BIT(28)
> > @@ -38,12 +42,28 @@
> > #define ICU_SATA0_ICU_ID 109
> > #define ICU_SATA1_ICU_ID 107
> >
> > +struct mvebu_icu_subset_data {
> > + unsigned int icu_group;
> > + unsigned int offset_set_ah;
> > + unsigned int offset_set_al;
> > + unsigned int offset_clr_ah;
> > + unsigned int offset_clr_al;
> > +};
> > +
> > struct mvebu_icu {
> > struct irq_chip irq_chip;
> > struct regmap *regmap;
> > struct device *dev;
> > - atomic_t initialized;
> > bool legacy_bindings;
> > + /* Lock on interrupt allocations/releases */
> > + struct mutex msi_lock;
> > + DECLARE_BITMAP(msi_bitmap, ICU_MAX_IRQS);
> > +};
> > +
> > +struct mvebu_icu_msi_data {
> > + struct mvebu_icu *icu;
> > + atomic_t initialized;
> > + const struct mvebu_icu_subset_data *subset_data;
>
> I'm a bit lost here. Can you have more than a single mvebu_icu_msi_data
> per subset_data? I though you'd only have one. If so, what's the benefit
> of having a separate structure? Am I missing something?
The reason for having a pointer on another structure is because I use
of_device_get_match_data() to retrieve a different structure per compatible
(ie. per subset).
>
> > };
> >
> > struct mvebu_icu_irq_data {
> > @@ -76,16 +96,25 @@ static struct mvebu_icu *mvebu_icu_dev_get_drvdata(struct platform_device *pdev)
> > return icu;
> > }
> >
> > -static void mvebu_icu_init(struct mvebu_icu *icu, struct msi_msg *msg)
> > +static void mvebu_icu_init(struct mvebu_icu *icu, struct irq_domain *d,
> > + struct msi_msg *msg)
> > {
> > - if (atomic_cmpxchg(&icu->initialized, false, true))
> > + struct mvebu_icu_msi_data *msi_data = platform_msi_get_host_data(d);
> > + const struct mvebu_icu_subset_data *subset = msi_data->subset_data;
>
> Since you don't use the domain for anything else than obtaining the
> subset_data, why don't you directly pass that subset_data as a
> parameter? Here, you are mixing two different abstraction levels, and
> that makes the whole thing really bizarre.
Indeed. Will edit this.
>
> > +
> > + if (atomic_cmpxchg(&msi_data->initialized, false, true))
> > + return;
> > +
> > + /* Set 'SET' ICU SPI message address in AP */
> > + regmap_write(icu->regmap, subset->offset_set_ah, msg[0].address_hi);
> > + regmap_write(icu->regmap, subset->offset_set_al, msg[0].address_lo);
> > +
> > + if (subset->icu_group != ICU_GRP_NSR)
> > return;
> >
> > - /* Set Clear/Set ICU SPI message address in AP */
> > - regmap_write(icu->regmap, ICU_SETSPI_NSR_AH, msg[0].address_hi);
> > - regmap_write(icu->regmap, ICU_SETSPI_NSR_AL, msg[0].address_lo);
> > - regmap_write(icu->regmap, ICU_CLRSPI_NSR_AH, msg[1].address_hi);
> > - regmap_write(icu->regmap, ICU_CLRSPI_NSR_AL, msg[1].address_lo);
> > + /* Set 'CLEAR' ICU SPI message address in AP (level-MSI only) */
> > + regmap_write(icu->regmap, subset->offset_clr_ah, msg[1].address_hi);
> > + regmap_write(icu->regmap, subset->offset_clr_al, msg[1].address_lo);
> > }
> >
> > static void mvebu_icu_write_msg(struct msi_desc *desc, struct msi_msg *msg)
> > @@ -96,8 +125,8 @@ static void mvebu_icu_write_msg(struct msi_desc *desc, struct msi_msg *msg)
> > unsigned int icu_int;
> >
> > if (msg->address_lo || msg->address_hi) {
> > - /* One off initialization */
> > - mvebu_icu_init(icu, msg);
> > + /* One off initialization per domain */
> > + mvebu_icu_init(icu, d->domain, msg);
> > /* Configure the ICU with irq number & type */
> > icu_int = msg->data | ICU_INT_ENABLE;
> > if (icu_irqd->type & IRQ_TYPE_EDGE_RISING)
> > @@ -131,7 +160,8 @@ static int
> > mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> > unsigned long *hwirq, unsigned int *type)
> > {
> > - struct mvebu_icu *icu = platform_msi_get_host_data(d);
> > + struct mvebu_icu_msi_data *msi_data = platform_msi_get_host_data(d);
> > + struct mvebu_icu *icu = msi_data->icu;
> > unsigned int param_count = icu->legacy_bindings ? 3 : 2;
> >
> > /* Check the count of the parameters in dt */
> > @@ -143,7 +173,7 @@ mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> >
> > if (icu->legacy_bindings) {
> > *hwirq = fwspec->param[1];
> > - *type = fwspec->param[2];
> > + *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
> > if (fwspec->param[0] != ICU_GRP_NSR) {
> > dev_err(icu->dev, "wrong ICU group type %x\n",
> > fwspec->param[0]);
> > @@ -151,7 +181,7 @@ mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> > }
> > } else {
> > *hwirq = fwspec->param[0];
> > - *type = fwspec->param[1];
> > + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> > }
> >
> > if (*hwirq >= ICU_MAX_IRQS) {
> > @@ -159,12 +189,36 @@ mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> > return -EINVAL;
> > }
> >
> > - /* Mask the type to prevent wrong DT configuration */
> > - *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
> > + /*
> > + * The ICU receives level-interrupts. MSI SEI are
> > + * edge-interrupts while MSI NSR are level-interrupts. Update the type
> > + * accordingly for the parent irqchip.
> > + */
> > + if (msi_data->subset_data->icu_group == ICU_GRP_SEI)
> > + *type = IRQ_TYPE_EDGE_RISING;
> >
> > return 0;
> > }
> >
> > +static int mvebu_icu_msi_bitmap_region_alloc(struct mvebu_icu *icu, int hwirq)
> > +{
> > + int ret;
> > +
> > + mutex_lock(&icu->msi_lock);
> > + ret = bitmap_allocate_region(icu->msi_bitmap, hwirq, 0);
> > + mutex_unlock(&icu->msi_lock);
> > +
> > + return ret;
> > +}
> > +
> > +static void mvebu_icu_msi_bitmap_region_release(struct mvebu_icu *icu,
> > + int hwirq)
> > +{
> > + mutex_lock(&icu->msi_lock);
> > + bitmap_release_region(icu->msi_bitmap, hwirq, 0);
> > + mutex_unlock(&icu->msi_lock);
> > +}
> > +
> > static int
> > mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> > unsigned int nr_irqs, void *args)
> > @@ -172,7 +226,9 @@ mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> > int err;
> > unsigned long hwirq;
> > struct irq_fwspec *fwspec = args;
> > - struct mvebu_icu *icu = platform_msi_get_host_data(domain);
> > + struct mvebu_icu_msi_data *msi_data =
> > + platform_msi_get_host_data(domain);
> > + struct mvebu_icu *icu = msi_data->icu;
> > struct mvebu_icu_irq_data *icu_irqd;
> >
> > icu_irqd = kmalloc(sizeof(*icu_irqd), GFP_KERNEL);
> > @@ -186,16 +242,20 @@ mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> > goto free_irqd;
> > }
> >
> > + err = mvebu_icu_msi_bitmap_region_alloc(icu, hwirq);
> > + if (err)
> > + goto free_irqd;
> > +
> > if (icu->legacy_bindings)
> > icu_irqd->icu_group = fwspec->param[0];
> > else
> > - icu_irqd->icu_group = ICU_GRP_NSR;
> > + icu_irqd->icu_group = msi_data->subset_data->icu_group;
> > icu_irqd->icu = icu;
> >
> > err = platform_msi_domain_alloc(domain, virq, nr_irqs);
> > if (err) {
> > dev_err(icu->dev, "failed to allocate ICU interrupt in parent domain\n");
> > - goto free_irqd;
> > + goto free_bitmap;
> > }
> >
> > /* Make sure there is no interrupt left pending by the firmware */
> > @@ -214,6 +274,8 @@ mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> >
> > free_msi:
> > platform_msi_domain_free(domain, virq, nr_irqs);
> > +free_bitmap:
> > + mvebu_icu_msi_bitmap_region_release(icu, hwirq);
> > free_irqd:
> > kfree(icu_irqd);
> > return err;
> > @@ -223,12 +285,17 @@ static void
> > mvebu_icu_irq_domain_free(struct irq_domain *domain, unsigned int virq,
> > unsigned int nr_irqs)
> > {
> > + struct mvebu_icu_msi_data *msi_data =
> > + platform_msi_get_host_data(domain);
> > + struct mvebu_icu *icu = msi_data->icu;
> > struct irq_data *d = irq_get_irq_data(virq);
> > struct mvebu_icu_irq_data *icu_irqd = d->chip_data;
> >
> > kfree(icu_irqd);
> >
> > platform_msi_domain_free(domain, virq, nr_irqs);
> > +
> > + mvebu_icu_msi_bitmap_region_release(icu, d->hwirq);
> > }
> >
> > static const struct irq_domain_ops mvebu_icu_domain_ops = {
> > @@ -239,14 +306,29 @@ static const struct irq_domain_ops mvebu_icu_domain_ops = {
> >
> > static int mvebu_icu_subset_probe(struct platform_device *pdev)
> > {
> > + const struct mvebu_icu_subset_data *subset;
> > + struct mvebu_icu_msi_data *msi_data;
> > struct device_node *msi_parent_dn;
> > struct irq_domain *irq_domain;
> > struct mvebu_icu *icu;
> >
> > + msi_data = devm_kzalloc(&pdev->dev, sizeof(*msi_data), GFP_KERNEL);
> > + if (!msi_data)
> > + return -ENOMEM;
> > +
> > icu = mvebu_icu_dev_get_drvdata(pdev);
> > if (IS_ERR(icu))
> > return PTR_ERR(icu);
> >
> > + subset = of_device_get_match_data(&pdev->dev);
> > + if (!subset) {
> > + dev_err(&pdev->dev, "Could not retrieve subset data\n");
> > + return -EINVAL;
> > + }
> > +
> > + msi_data->icu = icu;
> > + msi_data->subset_data = subset;
> > +
> > pdev->dev.msi_domain = of_msi_get_domain(&pdev->dev, pdev->dev.of_node,
> > DOMAIN_BUS_PLATFORM_MSI);
> > if (!pdev->dev.msi_domain)
> > @@ -256,10 +338,10 @@ static int mvebu_icu_subset_probe(struct platform_device *pdev)
> > if (!msi_parent_dn)
> > return -ENODEV;
> >
> > - irq_domain = platform_msi_create_device_domain(&pdev->dev, ICU_MAX_IRQS,
> > + irq_domain = platform_msi_create_device_domain(&pdev->dev, 0,
> > mvebu_icu_write_msg,
> > &mvebu_icu_domain_ops,
> > - icu);
> > + msi_data);
> > if (!irq_domain) {
> > dev_err(&pdev->dev, "Failed to create ICU MSI domain\n");
> > return -ENOMEM;
> > @@ -268,9 +350,28 @@ static int mvebu_icu_subset_probe(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static const struct mvebu_icu_subset_data mvebu_icu_nsr_subset_data = {
> > + .icu_group = ICU_GRP_NSR,
> > + .offset_set_ah = ICU_SETSPI_NSR_AH,
> > + .offset_set_al = ICU_SETSPI_NSR_AL,
> > + .offset_clr_ah = ICU_CLRSPI_NSR_AH,
> > + .offset_clr_al = ICU_CLRSPI_NSR_AL,
> > +};
> > +
> > +static const struct mvebu_icu_subset_data mvebu_icu_sei_subset_data = {
> > + .icu_group = ICU_GRP_SEI,
> > + .offset_set_ah = ICU_SET_SEI_AH,
> > + .offset_set_al = ICU_SET_SEI_AL,
> > +};
> > +
> > static const struct of_device_id mvebu_icu_subset_of_match[] = {
> > {
> > .compatible = "marvell,cp110-icu-nsr",
> > + .data = &mvebu_icu_nsr_subset_data,
> > + },
> > + {
> > + .compatible = "marvell,cp110-icu-sei",
> > + .data = &mvebu_icu_sei_subset_data,
> > },
> > {},
> > };
> > @@ -317,6 +418,8 @@ static int mvebu_icu_probe(struct platform_device *pdev)
> > if (IS_ERR(icu->regmap))
> > return PTR_ERR(icu->regmap);
> >
> > + mutex_init(&icu->msi_lock);
> > +
> > icu->irq_chip.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
> > "ICU.%x",
> > (unsigned int)res->start);
> > @@ -341,7 +444,7 @@ static int mvebu_icu_probe(struct platform_device *pdev)
> > #endif
> >
> > /*
> > - * Clean all ICU interrupts with type SPI_NSR, required to
> > + * Clean all ICU interrupts of type NSR and SEI, required to
> > * avoid unpredictable SPI assignments done by firmware.
> > */
> > for (i = 0 ; i < ICU_MAX_IRQS ; i++) {
> > @@ -350,7 +453,8 @@ static int mvebu_icu_probe(struct platform_device *pdev)
> > regmap_read(icu->regmap, ICU_INT_CFG(i), &icu_int);
> > icu_grp = icu_int >> ICU_GROUP_SHIFT;
> >
> > - if (icu_grp == ICU_GRP_NSR)
> > + if (icu_grp == ICU_GRP_NSR ||
> > + (icu_grp == ICU_GRP_SEI && !icu->legacy_bindings))
> > regmap_write(icu->regmap, ICU_INT_CFG(i), 0);
> > }
> >
> > @@ -363,7 +467,9 @@ static int mvebu_icu_probe(struct platform_device *pdev)
> > }
> >
> > static const struct of_device_id mvebu_icu_of_match[] = {
> > - { .compatible = "marvell,cp110-icu", },
> > + {
> > + .compatible = "marvell,cp110-icu",
> > + },
> > {},
> > };
> >
> >
>
> I'm close to loosing the plot with this driver, so I'll stop here and
> see what you have to say... ;-)
I'll check your previous comments tomorrow, I'll probably have a few
questions. Thanks for reviewing :-)
Regards,
Miquèl
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-06-28 17:12 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-22 15:14 [PATCH v3 00/17] Add System Error Interrupt support to Armada SoCs Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 01/17] platform-msi: allow creation of MSI domain without interrupt number Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-28 11:12 ` Marc Zyngier
2018-06-28 11:12 ` Marc Zyngier
2018-06-29 7:40 ` Miquel Raynal
2018-06-29 7:40 ` Miquel Raynal
2018-06-29 14:38 ` Marc Zyngier
2018-06-29 14:38 ` Marc Zyngier
2018-06-29 14:43 ` Miquel Raynal
2018-06-29 14:43 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 02/17] dt-bindings/interrupt-controller: fix Marvell ICU length in the example Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 03/17] arm64: dts: marvell: fix CP110 ICU node size Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-25 15:05 ` Gregory CLEMENT
2018-06-25 15:05 ` Gregory CLEMENT
2018-06-25 15:09 ` Miquel Raynal
2018-06-25 15:09 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 04/17] irqchip/irq-mvebu-icu: fix wrong private data retrieval Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 05/17] irqchip/irq-mvebu-icu: clarify the reset operation of configured interrupts Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 06/17] irqchip/irq-mvebu-icu: switch to regmap Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-28 12:05 ` Marc Zyngier
2018-06-28 12:05 ` Marc Zyngier
2018-06-29 15:27 ` Miquel Raynal
2018-06-29 15:27 ` Miquel Raynal
2018-06-29 17:17 ` Marc Zyngier
2018-06-29 17:17 ` Marc Zyngier
2018-06-29 18:20 ` Miquel Raynal
2018-06-29 18:20 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 07/17] irqchip/irq-mvebu-icu: make irq_domain local Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-28 12:10 ` Marc Zyngier
2018-06-28 12:10 ` Marc Zyngier
2018-06-29 12:32 ` Miquel Raynal
2018-06-29 12:32 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 08/17] irqchip/irq-mvebu-icu: disociate ICU and NSR Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-28 12:24 ` Marc Zyngier
2018-06-28 12:24 ` Marc Zyngier
2018-06-29 12:30 ` Miquel Raynal
2018-06-29 12:30 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 09/17] irqchip/irq-mvebu-icu: support ICU subnodes Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-28 12:45 ` Marc Zyngier
2018-06-28 12:45 ` Marc Zyngier
2018-06-29 12:34 ` Miquel Raynal
2018-06-29 12:34 ` Miquel Raynal
2018-07-04 9:09 ` Miquel Raynal
2018-07-04 9:09 ` Miquel Raynal
2018-07-04 12:43 ` Marc Zyngier
2018-07-04 12:43 ` Marc Zyngier
2018-07-04 15:16 ` Miquel Raynal
2018-07-04 15:16 ` Miquel Raynal
2018-07-05 8:19 ` Marc Zyngier
2018-07-05 8:19 ` Marc Zyngier
2018-06-22 15:14 ` [PATCH v3 10/17] irqchip/irq-mvebu-sei: add new driver for Marvell SEI Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-28 14:54 ` Marc Zyngier
2018-06-28 14:54 ` Marc Zyngier
2018-06-29 12:41 ` Miquel Raynal
2018-06-29 12:41 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 11/17] arm64: marvell: enable SEI driver Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 12/17] irqchip/irq-mvebu-icu: add support for System Error Interrupts (SEI) Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-28 16:49 ` Marc Zyngier
2018-06-28 16:49 ` Marc Zyngier
2018-06-28 17:12 ` Miquel Raynal [this message]
2018-06-28 17:12 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 13/17] dt-bindings/interrupt-controller: update Marvell ICU bindings Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 14/17] dt-bindings/interrupt-controller: add documentation for Marvell SEI controller Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 15/17] arm64: dts: marvell: add AP806 SEI subnode Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 16/17] arm64: dts: marvell: use new bindings for CP110 interrupts Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
2018-06-22 15:14 ` [PATCH v3 17/17] arm64: dts: marvell: add CP110 ICU SEI subnode Miquel Raynal
2018-06-22 15:14 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180628191219.51c84ecd@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.