[PATCH 1/2] USB: serial: kl5kusb105: remove KLSI device id

[Johan Hovold <johan@kernel.org>]

This driver was apparently never tested with an actual KLSI device. In
fact, even the device-id entry which was supposed to allow for this had
a typo in it.

Tests now reveal that the predicted firmware differences with the
PalmConnect adapters are real and that the driver does not support KLSI
devices with PID 0x000c, so let's remove the broken entry.

Reported-by: Chris Jakob <chris.jakob@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/kl5kusb105.c | 1 -
 drivers/usb/serial/kl5kusb105.h | 3 ---
 2 files changed, 4 deletions(-)

diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 5046ffd53cde..5ee48b0650c4 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -67,7 +67,6 @@ static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
  */
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
-	{ USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
 	{ }		/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/kl5kusb105.h b/drivers/usb/serial/kl5kusb105.h
index 41c9bf60fbf0..dbe98d85ca8e 100644
--- a/drivers/usb/serial/kl5kusb105.h
+++ b/drivers/usb/serial/kl5kusb105.h
@@ -7,9 +7,6 @@
 #define PALMCONNECT_VID		0x0830
 #define PALMCONNECT_PID		0x0080
 
-#define KLSI_VID		0x05e9
-#define KLSI_KL5KUSB105D_PID	0x00c0
-
 /* Vendor commands: */
 
 
-- 
2.18.0

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html