From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: honghui.zhang@mediatek.com
Cc: marc.zyngier@arm.com, bhelgaas@google.com,
matthias.bgg@gmail.com, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
yingjoe.chen@mediatek.com, eddie.huang@mediatek.com,
ryder.lee@mediatek.com, hongkun.cao@mediatek.com,
youlin.pei@mediatek.com, yong.wu@mediatek.com,
yt.shen@mediatek.com, sean.wang@mediatek.com, rjw@rjwysocki.net,
khilman@kernel.org, ulf.hansson@linaro.org
Subject: Re: [PATCH v3 3/4] PCI: mediatek: Add system pm support for MT2712 and MT7622
Date: Tue, 17 Jul 2018 18:15:43 +0100 [thread overview]
Message-ID: <20180717171543.GA20991@red-moon> (raw)
In-Reply-To: <1530518264-6125-4-git-send-email-honghui.zhang@mediatek.com>
[+Rafael, Kevin, Ulf]
On Mon, Jul 02, 2018 at 03:57:43PM +0800, honghui.zhang@mediatek.com wrote:
> From: Honghui Zhang <honghui.zhang@mediatek.com>
>
> The MTCMOS of PCIe Host for MT2712 and MT7622 will be off when system
> suspend, and all the internal control register will be reset after system
> resume. The PCIe link should be re-established and the related control
> register values should be re-set after system resume.
>
> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> drivers/pci/controller/pcie-mediatek.c | 67 ++++++++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
> index 86918d4..175d7b6 100644
> --- a/drivers/pci/controller/pcie-mediatek.c
> +++ b/drivers/pci/controller/pcie-mediatek.c
> @@ -134,12 +134,14 @@ struct mtk_pcie_port;
> /**
> * struct mtk_pcie_soc - differentiate between host generations
> * @need_fix_class_id: whether this host's class ID needed to be fixed or not
> + * @pm_support: whether the host's MTCMOS will be off when suspend
> * @ops: pointer to configuration access functions
> * @startup: pointer to controller setting functions
> * @setup_irq: pointer to initialize IRQ functions
> */
> struct mtk_pcie_soc {
> bool need_fix_class_id;
> + bool pm_support;
> struct pci_ops *ops;
> int (*startup)(struct mtk_pcie_port *port);
> int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
> @@ -1197,12 +1199,75 @@ static int mtk_pcie_probe(struct platform_device *pdev)
> return err;
> }
>
> +static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
> +{
> + struct mtk_pcie *pcie = dev_get_drvdata(dev);
> + const struct mtk_pcie_soc *soc = pcie->soc;
> + struct mtk_pcie_port *port;
> +
> + if (!soc->pm_support)
> + return 0;
> +
> + if (list_empty(&pcie->ports))
> + return 0;
> +
> + list_for_each_entry(port, &pcie->ports, list) {
> + clk_disable_unprepare(port->pipe_ck);
> + clk_disable_unprepare(port->obff_ck);
> + clk_disable_unprepare(port->axi_ck);
> + clk_disable_unprepare(port->aux_ck);
> + clk_disable_unprepare(port->ahb_ck);
> + clk_disable_unprepare(port->sys_ck);
> + phy_power_off(port->phy);
> + phy_exit(port->phy);
> + }
> +
> + mtk_pcie_subsys_powerdown(pcie);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused mtk_pcie_resume_noirq(struct device *dev)
> +{
> + struct mtk_pcie *pcie = dev_get_drvdata(dev);
> + const struct mtk_pcie_soc *soc = pcie->soc;
> + struct mtk_pcie_port *port, *tmp;
> +
> + if (!soc->pm_support)
> + return 0;
> +
> + if (list_empty(&pcie->ports))
> + return 0;
> +
> + if (dev->pm_domain) {
> + pm_runtime_enable(dev);
> + pm_runtime_get_sync(dev);
> + }
Are these runtime PM calls needed/abused here ?
Mind explaining the logic ?
There is certainly an asymmetry with the suspend callback which made me
suspicious, I am pretty certain Rafael/Kevin/Ulf can help me clarify so
that we can make progress with this patch.
Lorenzo
> +
> + clk_prepare_enable(pcie->free_ck);
> +
> + list_for_each_entry_safe(port, tmp, &pcie->ports, list)
> + mtk_pcie_enable_port(port);
> +
> + /* In case of EP was removed while system suspend. */
> + if (list_empty(&pcie->ports))
> + mtk_pcie_subsys_powerdown(pcie);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops mtk_pcie_pm_ops = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mtk_pcie_suspend_noirq,
> + mtk_pcie_resume_noirq)
> +};
> +
> static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
> .ops = &mtk_pcie_ops,
> .startup = mtk_pcie_startup_port,
> };
>
> static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
> + .pm_support = true,
> .ops = &mtk_pcie_ops_v2,
> .startup = mtk_pcie_startup_port_v2,
> .setup_irq = mtk_pcie_setup_irq,
> @@ -1210,6 +1275,7 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
>
> static const struct mtk_pcie_soc mtk_pcie_soc_mt7622 = {
> .need_fix_class_id = true,
> + .pm_support = true,
> .ops = &mtk_pcie_ops_v2,
> .startup = mtk_pcie_startup_port_v2,
> .setup_irq = mtk_pcie_setup_irq,
> @@ -1229,6 +1295,7 @@ static struct platform_driver mtk_pcie_driver = {
> .name = "mtk-pcie",
> .of_match_table = mtk_pcie_ids,
> .suppress_bind_attrs = true,
> + .pm = &mtk_pcie_pm_ops,
> },
> };
> builtin_platform_driver(mtk_pcie_driver);
> --
> 2.6.4
>
WARNING: multiple messages have this Message-ID (diff)
From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/4] PCI: mediatek: Add system pm support for MT2712 and MT7622
Date: Tue, 17 Jul 2018 18:15:43 +0100 [thread overview]
Message-ID: <20180717171543.GA20991@red-moon> (raw)
In-Reply-To: <1530518264-6125-4-git-send-email-honghui.zhang@mediatek.com>
[+Rafael, Kevin, Ulf]
On Mon, Jul 02, 2018 at 03:57:43PM +0800, honghui.zhang at mediatek.com wrote:
> From: Honghui Zhang <honghui.zhang@mediatek.com>
>
> The MTCMOS of PCIe Host for MT2712 and MT7622 will be off when system
> suspend, and all the internal control register will be reset after system
> resume. The PCIe link should be re-established and the related control
> register values should be re-set after system resume.
>
> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> drivers/pci/controller/pcie-mediatek.c | 67 ++++++++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
> index 86918d4..175d7b6 100644
> --- a/drivers/pci/controller/pcie-mediatek.c
> +++ b/drivers/pci/controller/pcie-mediatek.c
> @@ -134,12 +134,14 @@ struct mtk_pcie_port;
> /**
> * struct mtk_pcie_soc - differentiate between host generations
> * @need_fix_class_id: whether this host's class ID needed to be fixed or not
> + * @pm_support: whether the host's MTCMOS will be off when suspend
> * @ops: pointer to configuration access functions
> * @startup: pointer to controller setting functions
> * @setup_irq: pointer to initialize IRQ functions
> */
> struct mtk_pcie_soc {
> bool need_fix_class_id;
> + bool pm_support;
> struct pci_ops *ops;
> int (*startup)(struct mtk_pcie_port *port);
> int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
> @@ -1197,12 +1199,75 @@ static int mtk_pcie_probe(struct platform_device *pdev)
> return err;
> }
>
> +static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
> +{
> + struct mtk_pcie *pcie = dev_get_drvdata(dev);
> + const struct mtk_pcie_soc *soc = pcie->soc;
> + struct mtk_pcie_port *port;
> +
> + if (!soc->pm_support)
> + return 0;
> +
> + if (list_empty(&pcie->ports))
> + return 0;
> +
> + list_for_each_entry(port, &pcie->ports, list) {
> + clk_disable_unprepare(port->pipe_ck);
> + clk_disable_unprepare(port->obff_ck);
> + clk_disable_unprepare(port->axi_ck);
> + clk_disable_unprepare(port->aux_ck);
> + clk_disable_unprepare(port->ahb_ck);
> + clk_disable_unprepare(port->sys_ck);
> + phy_power_off(port->phy);
> + phy_exit(port->phy);
> + }
> +
> + mtk_pcie_subsys_powerdown(pcie);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused mtk_pcie_resume_noirq(struct device *dev)
> +{
> + struct mtk_pcie *pcie = dev_get_drvdata(dev);
> + const struct mtk_pcie_soc *soc = pcie->soc;
> + struct mtk_pcie_port *port, *tmp;
> +
> + if (!soc->pm_support)
> + return 0;
> +
> + if (list_empty(&pcie->ports))
> + return 0;
> +
> + if (dev->pm_domain) {
> + pm_runtime_enable(dev);
> + pm_runtime_get_sync(dev);
> + }
Are these runtime PM calls needed/abused here ?
Mind explaining the logic ?
There is certainly an asymmetry with the suspend callback which made me
suspicious, I am pretty certain Rafael/Kevin/Ulf can help me clarify so
that we can make progress with this patch.
Lorenzo
> +
> + clk_prepare_enable(pcie->free_ck);
> +
> + list_for_each_entry_safe(port, tmp, &pcie->ports, list)
> + mtk_pcie_enable_port(port);
> +
> + /* In case of EP was removed while system suspend. */
> + if (list_empty(&pcie->ports))
> + mtk_pcie_subsys_powerdown(pcie);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops mtk_pcie_pm_ops = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mtk_pcie_suspend_noirq,
> + mtk_pcie_resume_noirq)
> +};
> +
> static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
> .ops = &mtk_pcie_ops,
> .startup = mtk_pcie_startup_port,
> };
>
> static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
> + .pm_support = true,
> .ops = &mtk_pcie_ops_v2,
> .startup = mtk_pcie_startup_port_v2,
> .setup_irq = mtk_pcie_setup_irq,
> @@ -1210,6 +1275,7 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
>
> static const struct mtk_pcie_soc mtk_pcie_soc_mt7622 = {
> .need_fix_class_id = true,
> + .pm_support = true,
> .ops = &mtk_pcie_ops_v2,
> .startup = mtk_pcie_startup_port_v2,
> .setup_irq = mtk_pcie_setup_irq,
> @@ -1229,6 +1295,7 @@ static struct platform_driver mtk_pcie_driver = {
> .name = "mtk-pcie",
> .of_match_table = mtk_pcie_ids,
> .suppress_bind_attrs = true,
> + .pm = &mtk_pcie_pm_ops,
> },
> };
> builtin_platform_driver(mtk_pcie_driver);
> --
> 2.6.4
>
next prev parent reply other threads:[~2018-07-17 17:15 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-02 7:57 [PATCH v3 0/4] PCI: mediatek: fixup find_port, enable_msi and add pm, module support honghui.zhang
2018-07-02 7:57 ` honghui.zhang
2018-07-02 7:57 ` honghui.zhang at mediatek.com
2018-07-02 7:57 ` honghui.zhang
2018-07-02 7:57 ` [PATCH v3 1/4] PCI: mediatek: fixup mtk_pcie_find_port logical honghui.zhang
2018-07-02 7:57 ` honghui.zhang
2018-07-02 7:57 ` honghui.zhang at mediatek.com
2018-07-02 7:57 ` honghui.zhang
2018-07-02 7:57 ` [PATCH v3 2/4] PCI: mediatek: enable msi after clock enabled honghui.zhang
2018-07-02 7:57 ` honghui.zhang at mediatek.com
2018-07-02 7:57 ` honghui.zhang
2018-07-02 7:57 ` [PATCH v3 3/4] PCI: mediatek: Add system pm support for MT2712 and MT7622 honghui.zhang
2018-07-02 7:57 ` honghui.zhang
2018-07-02 7:57 ` honghui.zhang at mediatek.com
2018-07-02 7:57 ` honghui.zhang
2018-07-17 17:15 ` Lorenzo Pieralisi [this message]
2018-07-17 17:15 ` Lorenzo Pieralisi
2018-07-18 6:02 ` Honghui Zhang
2018-07-18 6:02 ` Honghui Zhang
2018-07-18 6:02 ` Honghui Zhang
2018-07-18 6:02 ` Honghui Zhang
2018-07-18 9:49 ` Lorenzo Pieralisi
2018-07-18 9:49 ` Lorenzo Pieralisi
2018-07-18 9:49 ` Lorenzo Pieralisi
2018-09-07 9:43 ` Honghui Zhang
2018-09-07 9:43 ` Honghui Zhang
2018-09-07 9:43 ` Honghui Zhang
2018-09-07 9:43 ` Honghui Zhang
[not found] ` <1530518264-6125-4-git-send-email-honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2018-09-07 12:33 ` Ulf Hansson
2018-09-07 12:33 ` Ulf Hansson
[not found] ` <CAPDyKFpFpR_NhtNW6rChMFw4KLweut8zC3x2V1ZBbdrV05iuTQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-09-10 9:42 ` Honghui Zhang
2018-09-10 9:42 ` Honghui Zhang
2018-09-10 11:25 ` Ulf Hansson
2018-09-10 11:25 ` Ulf Hansson
[not found] ` <CAPDyKFqvs6St1oTvx=_0dYSOXweW03PUZ=EAkgpL3XP-Sgg-sw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-09-11 10:23 ` Honghui Zhang
2018-09-11 10:23 ` Honghui Zhang
2018-09-21 17:10 ` Lorenzo Pieralisi
2018-09-21 17:10 ` Lorenzo Pieralisi
[not found] ` <20180921171033.GB27651-4tUPXFaYRHv6sAKXYmQ0tx/iLCjYCKR+VpNB7YpNyf8@public.gmane.org>
2018-09-26 9:14 ` Honghui Zhang
2018-09-26 9:14 ` Honghui Zhang
2018-07-02 7:57 ` [PATCH v3 4/4] PCI: mediatek: Add loadable kernel module support honghui.zhang
2018-07-02 7:57 ` honghui.zhang at mediatek.com
2018-07-02 7:57 ` honghui.zhang
2018-07-16 3:35 ` [PATCH v3 0/4] PCI: mediatek: fixup find_port, enable_msi and add pm, " Honghui Zhang
2018-07-16 3:35 ` Honghui Zhang
2018-07-16 3:35 ` Honghui Zhang
2018-07-16 3:35 ` Honghui Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180717171543.GA20991@red-moon \
--to=lorenzo.pieralisi@arm.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=honghui.zhang@mediatek.com \
--cc=hongkun.cao@mediatek.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=rjw@rjwysocki.net \
--cc=ryder.lee@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=ulf.hansson@linaro.org \
--cc=yingjoe.chen@mediatek.com \
--cc=yong.wu@mediatek.com \
--cc=youlin.pei@mediatek.com \
--cc=yt.shen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.