[PATCH 4.4 00/31] 4.4.143-stable review

[PATCH 4.4 00/31] 4.4.143-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.143 release.
There are 31 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Jul 22 12:13:28 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.143-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.143-rc1

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.

Santosh Shilimkar <santosh.shilimkar@oracle.com>
    rds: avoid unenecessary cong_update in loop transport

Eric Biggers <ebiggers@google.com>
    KEYS: DNS: fix parsing multiple options

Florian Westphal <fw@strlen.de>
    netfilter: ebtables: reject non-bridge targets

Paul Burton <paul.burton@mips.com>
    MIPS: Use async IPIs for arch_trigger_cpumask_backtrace()

Paul Burton <paul.burton@mips.com>
    MIPS: Call dump_stack() from show_regs()

Ping-Ke Shih <pkshih@realtek.com>
    rtlwifi: rtl8821ae: fix firmware is not ready to run

Gustavo A. R. Silva <gustavo@embeddedor.com>
    net: cxgb3_main: fix potential Spectre v1

Alex Vesker <valex@mellanox.com>
    net/mlx5: Fix command interface race in polling mode

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    net_sched: blackhole: tell upper qdisc about dropped packets

Jason Wang <jasowang@redhat.com>
    vhost_net: validate sock before trying to put its fd

Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
    tcp: prevent bogus FRTO undos with non-SACK flows

Yuchung Cheng <ycheng@google.com>
    tcp: fix Fast Open key endianness

Jiri Slaby <jslaby@suse.cz>
    r8152: napi hangup fix after disconnect

Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com>
    qed: Limit msix vectors in kdump kernel to the minimum required count.

Eric Dumazet <edumazet@google.com>
    net: sungem: fix rx checksum support

Alex Vesker <valex@mellanox.com>
    net/mlx5: Fix incorrect raw command length parsing

Eric Dumazet <edumazet@google.com>
    net: dccp: switch rx_tstamp_last_feedback to monotonic clock

Eric Dumazet <edumazet@google.com>
    net: dccp: avoid crash in ccid3_hc_rx_send_feedback()

Gustavo A. R. Silva <gustavo@embeddedor.com>
    atm: zatm: Fix potential Spectre v1

Christian Lamparter <chunkeey@googlemail.com>
    crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak

Christian Lamparter <chunkeey@googlemail.com>
    crypto: crypto4xx - remove bad list_del

Jonas Gorski <jonas.gorski@gmail.com>
    bcm63xx_enet: do not write to random DMA channel on BCM6345

Jonas Gorski <jonas.gorski@gmail.com>
    bcm63xx_enet: correct clock usage

alex chen <alex.chen@huawei.com>
    ocfs2: subsystem.su_mutex is required while accessing the item->ci_parent

David S. Miller <davem@davemloft.net>
    Revert "sit: reload iphdr in ipip6_rcv"

H. Peter Anvin <hpa@linux.intel.com>
    x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h>

Nick Desaulniers <ndesaulniers@google.com>
    compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations

David Rientjes <rientjes@google.com>
    compiler, clang: always inline when CONFIG_OPTIMIZE_INLINING is disabled

Linus Torvalds <torvalds@linux-foundation.org>
    compiler, clang: properly override 'inline' for clang

David Rientjes <rientjes@google.com>
    compiler, clang: suppress warning for unused static inline functions


-------------

Diffstat:

 Makefile                                        |  4 +-
 arch/mips/kernel/process.c                      | 31 +++++++++++-
 arch/mips/kernel/traps.c                        |  1 +
 arch/x86/include/asm/asm.h                      | 59 +++++++++++++++++++++++
 drivers/atm/zatm.c                              |  2 +
 drivers/crypto/amcc/crypto4xx_core.c            | 23 +++++----
 drivers/net/ethernet/broadcom/bcm63xx_enet.c    | 34 +++++++++----
 drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c |  2 +
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c   |  8 ++--
 drivers/net/ethernet/qlogic/qed/qed_main.c      |  9 ++++
 drivers/net/ethernet/sun/sungem.c               | 22 +++++----
 drivers/net/usb/r8152.c                         |  3 +-
 drivers/net/wireless/realtek/rtlwifi/core.c     |  1 -
 drivers/vhost/net.c                             |  3 +-
 fs/ocfs2/cluster/nodemanager.c                  | 63 +++++++++++++++++++++----
 include/linux/compiler-gcc.h                    | 35 ++++++++++----
 net/bridge/netfilter/ebtables.c                 | 13 +++++
 net/dccp/ccids/ccid3.c                          | 16 ++++---
 net/dns_resolver/dns_key.c                      | 28 ++++++-----
 net/ipv4/sysctl_net_ipv4.c                      | 18 +++++--
 net/ipv4/tcp_input.c                            |  9 ++++
 net/ipv6/sit.c                                  |  1 -
 net/nfc/llcp_commands.c                         |  9 ++--
 net/rds/loop.c                                  |  1 +
 net/rds/rds.h                                   |  5 ++
 net/rds/recv.c                                  |  5 ++
 net/sched/sch_blackhole.c                       |  2 +-
 27 files changed, 320 insertions(+), 87 deletions(-)

[PATCH 4.4 01/31] compiler, clang: suppress warning for unused static inline functions

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Rientjes <rientjes@google.com>

commit abb2ea7dfd82451d85ce669b811310c05ab5ca46 upstream.

GCC explicitly does not warn for unused static inline functions for
-Wunused-function.  The manual states:

	Warn whenever a static function is declared but not defined or
	a non-inline static function is unused.

Clang does warn for static inline functions that are unused.

It turns out that suppressing the warnings avoids potentially complex
#ifdef directives, which also reduces LOC.

Suppress the warning for clang.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/compiler-clang.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/include/linux/compiler-clang.h
+++ b/include/linux/compiler-clang.h
@@ -15,3 +15,10 @@
  * with any version that can compile the kernel
  */
 #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
+
+/*
+ * GCC does not warn about unused static inline functions for
+ * -Wunused-function.  This turns out to avoid the need for complex #ifdef
+ * directives.  Suppress the warning in clang as well.
+ */
+#define inline inline __attribute__((unused))

[PATCH 4.4 02/31] compiler, clang: properly override inline for clang

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 6d53cefb18e4646fb4bf62ccb6098fb3808486df upstream.

Commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused
static inline functions") just caused more warnings due to re-defining
the 'inline' macro.

So undef it before re-defining it, and also add the 'notrace' attribute
like the gcc version that this is overriding does.

Maybe this makes clang happier.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/compiler-clang.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/include/linux/compiler-clang.h
+++ b/include/linux/compiler-clang.h
@@ -21,4 +21,5 @@
  * -Wunused-function.  This turns out to avoid the need for complex #ifdef
  * directives.  Suppress the warning in clang as well.
  */
-#define inline inline __attribute__((unused))
+#undef inline
+#define inline inline __attribute__((unused)) notrace

[PATCH 4.4 03/31] compiler, clang: always inline when CONFIG_OPTIMIZE_INLINING is disabled

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Rientjes <rientjes@google.com>

commit 9a04dbcfb33b4012d0ce8c0282f1e3ca694675b1 upstream.

The motivation for commit abb2ea7dfd82 ("compiler, clang: suppress
warning for unused static inline functions") was to suppress clang's
warnings about unused static inline functions.

For configs without CONFIG_OPTIMIZE_INLINING enabled, such as any non-x86
architecture, `inline' in the kernel implies that
__attribute__((always_inline)) is used.

Some code depends on that behavior, see
  https://lkml.org/lkml/2017/6/13/918:

  net/built-in.o: In function `__xchg_mb':
  arch/arm64/include/asm/cmpxchg.h:99: undefined reference to `__compiletime_assert_99'
  arch/arm64/include/asm/cmpxchg.h:99: undefined reference to `__compiletime_assert_99

The full fix would be to identify these breakages and annotate the
functions with __always_inline instead of `inline'.  But since we are
late in the 4.12-rc cycle, simply carry forward the forced inlining
behavior and work toward moving arm64, and other architectures, toward
CONFIG_OPTIMIZE_INLINING behavior.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706261552200.1075@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Sodagudi Prasad <psodagud@codeaurora.org>
Tested-by: Sodagudi Prasad <psodagud@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/compiler-clang.h |    8 --------
 include/linux/compiler-gcc.h   |   18 +++++++++++-------
 2 files changed, 11 insertions(+), 15 deletions(-)

--- a/include/linux/compiler-clang.h
+++ b/include/linux/compiler-clang.h
@@ -15,11 +15,3 @@
  * with any version that can compile the kernel
  */
 #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-
-/*
- * GCC does not warn about unused static inline functions for
- * -Wunused-function.  This turns out to avoid the need for complex #ifdef
- * directives.  Suppress the warning in clang as well.
- */
-#undef inline
-#define inline inline __attribute__((unused)) notrace
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -66,18 +66,22 @@
 
 /*
  * Force always-inline if the user requests it so via the .config,
- * or if gcc is too old:
+ * or if gcc is too old.
+ * GCC does not warn about unused static inline functions for
+ * -Wunused-function.  This turns out to avoid the need for complex #ifdef
+ * directives.  Suppress the warning in clang as well by using "unused"
+ * function attribute, which is redundant but not harmful for gcc.
  */
 #if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) ||		\
     !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-#define inline		inline		__attribute__((always_inline)) notrace
-#define __inline__	__inline__	__attribute__((always_inline)) notrace
-#define __inline	__inline	__attribute__((always_inline)) notrace
+#define inline inline		__attribute__((always_inline,unused)) notrace
+#define __inline__ __inline__	__attribute__((always_inline,unused)) notrace
+#define __inline __inline	__attribute__((always_inline,unused)) notrace
 #else
 /* A lot of inline functions can cause havoc with function tracing */
-#define inline		inline		notrace
-#define __inline__	__inline__	notrace
-#define __inline	__inline	notrace
+#define inline inline		__attribute__((unused)) notrace
+#define __inline__ __inline__	__attribute__((unused)) notrace
+#define __inline __inline	__attribute__((unused)) notrace
 #endif
 
 #define __always_inline	inline __attribute__((always_inline))

[PATCH 4.4 04/31] compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nick Desaulniers <ndesaulniers@google.com>

commit d03db2bc26f0e4a6849ad649a09c9c73fccdc656 upstream.

Functions marked extern inline do not emit an externally visible
function when the gnu89 C standard is used. Some KBUILD Makefiles
overwrite KBUILD_CFLAGS. This is an issue for GCC 5.1+ users as without
an explicit C standard specified, the default is gnu11. Since c99, the
semantics of extern inline have changed such that an externally visible
function is always emitted. This can lead to multiple definition errors
of extern inline functions at link time of compilation units whose build
files have removed an explicit C standard compiler flag for users of GCC
5.1+ or Clang.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: sedat.dilek@gmail.com
Cc: thomas.lendacky@amd.com
Cc: tstellar@redhat.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-2-ndesaulniers@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/compiler-gcc.h |   29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -65,25 +65,40 @@
 #endif
 
 /*
+ * Feature detection for gnu_inline (gnu89 extern inline semantics). Either
+ * __GNUC_STDC_INLINE__ is defined (not using gnu89 extern inline semantics,
+ * and we opt in to the gnu89 semantics), or __GNUC_STDC_INLINE__ is not
+ * defined so the gnu89 semantics are the default.
+ */
+#ifdef __GNUC_STDC_INLINE__
+# define __gnu_inline	__attribute__((gnu_inline))
+#else
+# define __gnu_inline
+#endif
+
+/*
  * Force always-inline if the user requests it so via the .config,
  * or if gcc is too old.
  * GCC does not warn about unused static inline functions for
  * -Wunused-function.  This turns out to avoid the need for complex #ifdef
  * directives.  Suppress the warning in clang as well by using "unused"
  * function attribute, which is redundant but not harmful for gcc.
+ * Prefer gnu_inline, so that extern inline functions do not emit an
+ * externally visible function. This makes extern inline behave as per gnu89
+ * semantics rather than c99. This prevents multiple symbol definition errors
+ * of extern inline functions at link time.
+ * A lot of inline functions can cause havoc with function tracing.
  */
 #if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) ||		\
     !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-#define inline inline		__attribute__((always_inline,unused)) notrace
-#define __inline__ __inline__	__attribute__((always_inline,unused)) notrace
-#define __inline __inline	__attribute__((always_inline,unused)) notrace
+#define inline \
+	inline __attribute__((always_inline, unused)) notrace __gnu_inline
 #else
-/* A lot of inline functions can cause havoc with function tracing */
-#define inline inline		__attribute__((unused)) notrace
-#define __inline__ __inline__	__attribute__((unused)) notrace
-#define __inline __inline	__attribute__((unused)) notrace
+#define inline inline		__attribute__((unused)) notrace __gnu_inline
 #endif
 
+#define __inline__ inline
+#define __inline inline
 #define __always_inline	inline __attribute__((always_inline))
 #define  noinline	__attribute__((noinline))

[PATCH 4.4 04/31] compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nick Desaulniers <ndesaulniers@google.com>

commit d03db2bc26f0e4a6849ad649a09c9c73fccdc656 upstream.

Functions marked extern inline do not emit an externally visible
function when the gnu89 C standard is used. Some KBUILD Makefiles
overwrite KBUILD_CFLAGS. This is an issue for GCC 5.1+ users as without
an explicit C standard specified, the default is gnu11. Since c99, the
semantics of extern inline have changed such that an externally visible
function is always emitted. This can lead to multiple definition errors
of extern inline functions at link time of compilation units whose build
files have removed an explicit C standard compiler flag for users of GCC
5.1+ or Clang.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: sedat.dilek@gmail.com
Cc: thomas.lendacky@amd.com
Cc: tstellar@redhat.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-2-ndesaulniers@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/compiler-gcc.h |   29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -65,25 +65,40 @@
 #endif
 
 /*
+ * Feature detection for gnu_inline (gnu89 extern inline semantics). Either
+ * __GNUC_STDC_INLINE__ is defined (not using gnu89 extern inline semantics,
+ * and we opt in to the gnu89 semantics), or __GNUC_STDC_INLINE__ is not
+ * defined so the gnu89 semantics are the default.
+ */
+#ifdef __GNUC_STDC_INLINE__
+# define __gnu_inline	__attribute__((gnu_inline))
+#else
+# define __gnu_inline
+#endif
+
+/*
  * Force always-inline if the user requests it so via the .config,
  * or if gcc is too old.
  * GCC does not warn about unused static inline functions for
  * -Wunused-function.  This turns out to avoid the need for complex #ifdef
  * directives.  Suppress the warning in clang as well by using "unused"
  * function attribute, which is redundant but not harmful for gcc.
+ * Prefer gnu_inline, so that extern inline functions do not emit an
+ * externally visible function. This makes extern inline behave as per gnu89
+ * semantics rather than c99. This prevents multiple symbol definition errors
+ * of extern inline functions at link time.
+ * A lot of inline functions can cause havoc with function tracing.
  */
 #if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) ||		\
     !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-#define inline inline		__attribute__((always_inline,unused)) notrace
-#define __inline__ __inline__	__attribute__((always_inline,unused)) notrace
-#define __inline __inline	__attribute__((always_inline,unused)) notrace
+#define inline \
+	inline __attribute__((always_inline, unused)) notrace __gnu_inline
 #else
-/* A lot of inline functions can cause havoc with function tracing */
-#define inline inline		__attribute__((unused)) notrace
-#define __inline__ __inline__	__attribute__((unused)) notrace
-#define __inline __inline	__attribute__((unused)) notrace
+#define inline inline		__attribute__((unused)) notrace __gnu_inline
 #endif
 
+#define __inline__ inline
+#define __inline inline
 #define __always_inline	inline __attribute__((always_inline))
 #define  noinline	__attribute__((noinline))
 

[PATCH 4.4 05/31] x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h>

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: H. Peter Anvin <hpa@linux.intel.com>

commit 0e2e160033283e20f688d8bad5b89460cc5bfcc4 upstream.

i386 and x86-64 uses different registers for arguments; make them
available so we don't have to #ifdef in the actual code.

Native size and specified size (q, l, w, b) versions are provided.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: joe@perches.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: thomas.lendacky@amd.com
Cc: tstellar@redhat.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-3-ndesaulniers@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/asm.h |   59 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -44,6 +44,65 @@
 #define _ASM_SI		__ASM_REG(si)
 #define _ASM_DI		__ASM_REG(di)
 
+#ifndef __x86_64__
+/* 32 bit */
+
+#define _ASM_ARG1	_ASM_AX
+#define _ASM_ARG2	_ASM_DX
+#define _ASM_ARG3	_ASM_CX
+
+#define _ASM_ARG1L	eax
+#define _ASM_ARG2L	edx
+#define _ASM_ARG3L	ecx
+
+#define _ASM_ARG1W	ax
+#define _ASM_ARG2W	dx
+#define _ASM_ARG3W	cx
+
+#define _ASM_ARG1B	al
+#define _ASM_ARG2B	dl
+#define _ASM_ARG3B	cl
+
+#else
+/* 64 bit */
+
+#define _ASM_ARG1	_ASM_DI
+#define _ASM_ARG2	_ASM_SI
+#define _ASM_ARG3	_ASM_DX
+#define _ASM_ARG4	_ASM_CX
+#define _ASM_ARG5	r8
+#define _ASM_ARG6	r9
+
+#define _ASM_ARG1Q	rdi
+#define _ASM_ARG2Q	rsi
+#define _ASM_ARG3Q	rdx
+#define _ASM_ARG4Q	rcx
+#define _ASM_ARG5Q	r8
+#define _ASM_ARG6Q	r9
+
+#define _ASM_ARG1L	edi
+#define _ASM_ARG2L	esi
+#define _ASM_ARG3L	edx
+#define _ASM_ARG4L	ecx
+#define _ASM_ARG5L	r8d
+#define _ASM_ARG6L	r9d
+
+#define _ASM_ARG1W	di
+#define _ASM_ARG2W	si
+#define _ASM_ARG3W	dx
+#define _ASM_ARG4W	cx
+#define _ASM_ARG5W	r8w
+#define _ASM_ARG6W	r9w
+
+#define _ASM_ARG1B	dil
+#define _ASM_ARG2B	sil
+#define _ASM_ARG3B	dl
+#define _ASM_ARG4B	cl
+#define _ASM_ARG5B	r8b
+#define _ASM_ARG6B	r9b
+
+#endif
+
 /* Exception table entry */
 #ifdef __ASSEMBLY__
 # define _ASM_EXTABLE(from,to)					\

[PATCH 4.4 05/31] x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h>

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: H. Peter Anvin <hpa@linux.intel.com>

commit 0e2e160033283e20f688d8bad5b89460cc5bfcc4 upstream.

i386 and x86-64 uses different registers for arguments; make them
available so we don't have to #ifdef in the actual code.

Native size and specified size (q, l, w, b) versions are provided.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: joe@perches.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: thomas.lendacky@amd.com
Cc: tstellar@redhat.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-3-ndesaulniers@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/asm.h |   59 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -44,6 +44,65 @@
 #define _ASM_SI		__ASM_REG(si)
 #define _ASM_DI		__ASM_REG(di)
 
+#ifndef __x86_64__
+/* 32 bit */
+
+#define _ASM_ARG1	_ASM_AX
+#define _ASM_ARG2	_ASM_DX
+#define _ASM_ARG3	_ASM_CX
+
+#define _ASM_ARG1L	eax
+#define _ASM_ARG2L	edx
+#define _ASM_ARG3L	ecx
+
+#define _ASM_ARG1W	ax
+#define _ASM_ARG2W	dx
+#define _ASM_ARG3W	cx
+
+#define _ASM_ARG1B	al
+#define _ASM_ARG2B	dl
+#define _ASM_ARG3B	cl
+
+#else
+/* 64 bit */
+
+#define _ASM_ARG1	_ASM_DI
+#define _ASM_ARG2	_ASM_SI
+#define _ASM_ARG3	_ASM_DX
+#define _ASM_ARG4	_ASM_CX
+#define _ASM_ARG5	r8
+#define _ASM_ARG6	r9
+
+#define _ASM_ARG1Q	rdi
+#define _ASM_ARG2Q	rsi
+#define _ASM_ARG3Q	rdx
+#define _ASM_ARG4Q	rcx
+#define _ASM_ARG5Q	r8
+#define _ASM_ARG6Q	r9
+
+#define _ASM_ARG1L	edi
+#define _ASM_ARG2L	esi
+#define _ASM_ARG3L	edx
+#define _ASM_ARG4L	ecx
+#define _ASM_ARG5L	r8d
+#define _ASM_ARG6L	r9d
+
+#define _ASM_ARG1W	di
+#define _ASM_ARG2W	si
+#define _ASM_ARG3W	dx
+#define _ASM_ARG4W	cx
+#define _ASM_ARG5W	r8w
+#define _ASM_ARG6W	r9w
+
+#define _ASM_ARG1B	dil
+#define _ASM_ARG2B	sil
+#define _ASM_ARG3B	dl
+#define _ASM_ARG4B	cl
+#define _ASM_ARG5B	r8b
+#define _ASM_ARG6B	r9b
+
+#endif
+
 /* Exception table entry */
 #ifdef __ASSEMBLY__
 # define _ASM_EXTABLE(from,to)					\

[PATCH 4.4 05/31] x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h>

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: H. Peter Anvin <hpa@linux.intel.com>

commit 0e2e160033283e20f688d8bad5b89460cc5bfcc4 upstream.

i386 and x86-64 uses different registers for arguments; make them
available so we don't have to #ifdef in the actual code.

Native size and specified size (q, l, w, b) versions are provided.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: joe@perches.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: thomas.lendacky@amd.com
Cc: tstellar@redhat.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-3-ndesaulniers@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/asm.h |   59 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -44,6 +44,65 @@
 #define _ASM_SI		__ASM_REG(si)
 #define _ASM_DI		__ASM_REG(di)
 
+#ifndef __x86_64__
+/* 32 bit */
+
+#define _ASM_ARG1	_ASM_AX
+#define _ASM_ARG2	_ASM_DX
+#define _ASM_ARG3	_ASM_CX
+
+#define _ASM_ARG1L	eax
+#define _ASM_ARG2L	edx
+#define _ASM_ARG3L	ecx
+
+#define _ASM_ARG1W	ax
+#define _ASM_ARG2W	dx
+#define _ASM_ARG3W	cx
+
+#define _ASM_ARG1B	al
+#define _ASM_ARG2B	dl
+#define _ASM_ARG3B	cl
+
+#else
+/* 64 bit */
+
+#define _ASM_ARG1	_ASM_DI
+#define _ASM_ARG2	_ASM_SI
+#define _ASM_ARG3	_ASM_DX
+#define _ASM_ARG4	_ASM_CX
+#define _ASM_ARG5	r8
+#define _ASM_ARG6	r9
+
+#define _ASM_ARG1Q	rdi
+#define _ASM_ARG2Q	rsi
+#define _ASM_ARG3Q	rdx
+#define _ASM_ARG4Q	rcx
+#define _ASM_ARG5Q	r8
+#define _ASM_ARG6Q	r9
+
+#define _ASM_ARG1L	edi
+#define _ASM_ARG2L	esi
+#define _ASM_ARG3L	edx
+#define _ASM_ARG4L	ecx
+#define _ASM_ARG5L	r8d
+#define _ASM_ARG6L	r9d
+
+#define _ASM_ARG1W	di
+#define _ASM_ARG2W	si
+#define _ASM_ARG3W	dx
+#define _ASM_ARG4W	cx
+#define _ASM_ARG5W	r8w
+#define _ASM_ARG6W	r9w
+
+#define _ASM_ARG1B	dil
+#define _ASM_ARG2B	sil
+#define _ASM_ARG3B	dl
+#define _ASM_ARG4B	cl
+#define _ASM_ARG5B	r8b
+#define _ASM_ARG6B	r9b
+
+#endif
+
 /* Exception table entry */
 #ifdef __ASSEMBLY__
 # define _ASM_EXTABLE(from,to)					\

[PATCH 4.4 06/31] Revert "sit: reload iphdr in ipip6_rcv"

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David S. Miller <davem@davemloft.net>

commit f4eb17e1efe538d4da7d574bedb00a8dafcc26b7 upstream.

This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9.

As per Eric Dumazet, the pskb_may_pull() is a NOP in this
particular case, so the 'iph' reload is unnecessary.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv6/sit.c |    1 -
 1 file changed, 1 deletion(-)

--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -692,7 +692,6 @@ static int ipip6_rcv(struct sk_buff *skb
 
 		if (iptunnel_pull_header(skb, 0, htons(ETH_P_IPV6)))
 			goto out;
-		iph = ip_hdr(skb);
 
 		err = IP_ECN_decapsulate(iph, skb);
 		if (unlikely(err)) {

[PATCH 4.4 07/31] ocfs2: subsystem.su_mutex is required while accessing the item->ci_parent

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: alex chen <alex.chen@huawei.com>

commit 853bc26a7ea39e354b9f8889ae7ad1492ffa28d2 upstream.

The subsystem.su_mutex is required while accessing the item->ci_parent,
otherwise, NULL pointer dereference to the item->ci_parent will be
triggered in the following situation:

add node                     delete node
sys_write
 vfs_write
  configfs_write_file
   o2nm_node_store
    o2nm_node_local_write
                             do_rmdir
                              vfs_rmdir
                               configfs_rmdir
                                mutex_lock(&subsys->su_mutex);
                                unlink_obj
                                 item->ci_group = NULL;
                                 item->ci_parent = NULL;
	 to_o2nm_cluster_from_node
	  node->nd_item.ci_parent->ci_parent
	  BUG since of NULL pointer dereference to nd_item.ci_parent

Moreover, the o2nm_cluster also should be protected by the
subsystem.su_mutex.

[alex.chen@huawei.com: v2]
  Link: http://lkml.kernel.org/r/59EEAA69.9080703@huawei.com
Link: http://lkml.kernel.org/r/59E9B36A.10700@huawei.com
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ocfs2/cluster/nodemanager.c |   63 +++++++++++++++++++++++++++++++++++------
 1 file changed, 55 insertions(+), 8 deletions(-)

--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -40,6 +40,9 @@ char *o2nm_fence_method_desc[O2NM_FENCE_
 		"panic",	/* O2NM_FENCE_PANIC */
 };
 
+static inline void o2nm_lock_subsystem(void);
+static inline void o2nm_unlock_subsystem(void);
+
 struct o2nm_node *o2nm_get_node_by_num(u8 node_num)
 {
 	struct o2nm_node *node = NULL;
@@ -181,7 +184,10 @@ static struct o2nm_cluster *to_o2nm_clus
 {
 	/* through the first node_set .parent
 	 * mycluster/nodes/mynode == o2nm_cluster->o2nm_node_group->o2nm_node */
-	return to_o2nm_cluster(node->nd_item.ci_parent->ci_parent);
+	if (node->nd_item.ci_parent)
+		return to_o2nm_cluster(node->nd_item.ci_parent->ci_parent);
+	else
+		return NULL;
 }
 
 enum {
@@ -194,7 +200,7 @@ static ssize_t o2nm_node_num_store(struc
 				   size_t count)
 {
 	struct o2nm_node *node = to_o2nm_node(item);
-	struct o2nm_cluster *cluster = to_o2nm_cluster_from_node(node);
+	struct o2nm_cluster *cluster;
 	unsigned long tmp;
 	char *p = (char *)page;
 	int ret = 0;
@@ -214,6 +220,13 @@ static ssize_t o2nm_node_num_store(struc
 	    !test_bit(O2NM_NODE_ATTR_PORT, &node->nd_set_attributes))
 		return -EINVAL; /* XXX */
 
+	o2nm_lock_subsystem();
+	cluster = to_o2nm_cluster_from_node(node);
+	if (!cluster) {
+		o2nm_unlock_subsystem();
+		return -EINVAL;
+	}
+
 	write_lock(&cluster->cl_nodes_lock);
 	if (cluster->cl_nodes[tmp])
 		ret = -EEXIST;
@@ -226,6 +239,8 @@ static ssize_t o2nm_node_num_store(struc
 		set_bit(tmp, cluster->cl_nodes_bitmap);
 	}
 	write_unlock(&cluster->cl_nodes_lock);
+	o2nm_unlock_subsystem();
+
 	if (ret)
 		return ret;
 
@@ -269,7 +284,7 @@ static ssize_t o2nm_node_ipv4_address_st
 					    size_t count)
 {
 	struct o2nm_node *node = to_o2nm_node(item);
-	struct o2nm_cluster *cluster = to_o2nm_cluster_from_node(node);
+	struct o2nm_cluster *cluster;
 	int ret, i;
 	struct rb_node **p, *parent;
 	unsigned int octets[4];
@@ -286,6 +301,13 @@ static ssize_t o2nm_node_ipv4_address_st
 		be32_add_cpu(&ipv4_addr, octets[i] << (i * 8));
 	}
 
+	o2nm_lock_subsystem();
+	cluster = to_o2nm_cluster_from_node(node);
+	if (!cluster) {
+		o2nm_unlock_subsystem();
+		return -EINVAL;
+	}
+
 	ret = 0;
 	write_lock(&cluster->cl_nodes_lock);
 	if (o2nm_node_ip_tree_lookup(cluster, ipv4_addr, &p, &parent))
@@ -298,6 +320,8 @@ static ssize_t o2nm_node_ipv4_address_st
 		rb_insert_color(&node->nd_ip_node, &cluster->cl_node_ip_tree);
 	}
 	write_unlock(&cluster->cl_nodes_lock);
+	o2nm_unlock_subsystem();
+
 	if (ret)
 		return ret;
 
@@ -315,7 +339,7 @@ static ssize_t o2nm_node_local_store(str
 				     size_t count)
 {
 	struct o2nm_node *node = to_o2nm_node(item);
-	struct o2nm_cluster *cluster = to_o2nm_cluster_from_node(node);
+	struct o2nm_cluster *cluster;
 	unsigned long tmp;
 	char *p = (char *)page;
 	ssize_t ret;
@@ -333,17 +357,26 @@ static ssize_t o2nm_node_local_store(str
 	    !test_bit(O2NM_NODE_ATTR_PORT, &node->nd_set_attributes))
 		return -EINVAL; /* XXX */
 
+	o2nm_lock_subsystem();
+	cluster = to_o2nm_cluster_from_node(node);
+	if (!cluster) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* the only failure case is trying to set a new local node
 	 * when a different one is already set */
 	if (tmp && tmp == cluster->cl_has_local &&
-	    cluster->cl_local_node != node->nd_num)
-		return -EBUSY;
+	    cluster->cl_local_node != node->nd_num) {
+		ret = -EBUSY;
+		goto out;
+	}
 
 	/* bring up the rx thread if we're setting the new local node. */
 	if (tmp && !cluster->cl_has_local) {
 		ret = o2net_start_listening(node);
 		if (ret)
-			return ret;
+			goto out;
 	}
 
 	if (!tmp && cluster->cl_has_local &&
@@ -358,7 +391,11 @@ static ssize_t o2nm_node_local_store(str
 		cluster->cl_local_node = node->nd_num;
 	}
 
-	return count;
+	ret = count;
+
+out:
+	o2nm_unlock_subsystem();
+	return ret;
 }
 
 CONFIGFS_ATTR(o2nm_node_, num);
@@ -750,6 +787,16 @@ static struct o2nm_cluster_group o2nm_cl
 	},
 };
 
+static inline void o2nm_lock_subsystem(void)
+{
+	mutex_lock(&o2nm_cluster_group.cs_subsys.su_mutex);
+}
+
+static inline void o2nm_unlock_subsystem(void)
+{
+	mutex_unlock(&o2nm_cluster_group.cs_subsys.su_mutex);
+}
+
 int o2nm_depend_item(struct config_item *item)
 {
 	return configfs_depend_item(&o2nm_cluster_group.cs_subsys, item);

[PATCH 4.4 08/31] bcm63xx_enet: correct clock usage

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonas Gorski <jonas.gorski@gmail.com>

commit 9c86b846ce02f7e35d7234cf090b80553eba5389 upstream.

Check the return code of prepare_enable and change one last instance of
enable only to prepare_enable. Also properly disable and release the
clock in error paths and on remove for enetsw.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/broadcom/bcm63xx_enet.c |   31 ++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1787,7 +1787,9 @@ static int bcm_enet_probe(struct platfor
 		ret = PTR_ERR(priv->mac_clk);
 		goto out;
 	}
-	clk_prepare_enable(priv->mac_clk);
+	ret = clk_prepare_enable(priv->mac_clk);
+	if (ret)
+		goto out_put_clk_mac;
 
 	/* initialize default and fetch platform data */
 	priv->rx_ring_size = BCMENET_DEF_RX_DESC;
@@ -1819,9 +1821,11 @@ static int bcm_enet_probe(struct platfor
 		if (IS_ERR(priv->phy_clk)) {
 			ret = PTR_ERR(priv->phy_clk);
 			priv->phy_clk = NULL;
-			goto out_put_clk_mac;
+			goto out_disable_clk_mac;
 		}
-		clk_prepare_enable(priv->phy_clk);
+		ret = clk_prepare_enable(priv->phy_clk);
+		if (ret)
+			goto out_put_clk_phy;
 	}
 
 	/* do minimal hardware init to be able to probe mii bus */
@@ -1921,13 +1925,16 @@ out_free_mdio:
 out_uninit_hw:
 	/* turn off mdc clock */
 	enet_writel(priv, 0, ENET_MIISC_REG);
-	if (priv->phy_clk) {
+	if (priv->phy_clk)
 		clk_disable_unprepare(priv->phy_clk);
+
+out_put_clk_phy:
+	if (priv->phy_clk)
 		clk_put(priv->phy_clk);
-	}
 
-out_put_clk_mac:
+out_disable_clk_mac:
 	clk_disable_unprepare(priv->mac_clk);
+out_put_clk_mac:
 	clk_put(priv->mac_clk);
 out:
 	free_netdev(dev);
@@ -2772,7 +2779,9 @@ static int bcm_enetsw_probe(struct platf
 		ret = PTR_ERR(priv->mac_clk);
 		goto out_unmap;
 	}
-	clk_enable(priv->mac_clk);
+	ret = clk_prepare_enable(priv->mac_clk);
+	if (ret)
+		goto out_put_clk;
 
 	priv->rx_chan = 0;
 	priv->tx_chan = 1;
@@ -2793,7 +2802,7 @@ static int bcm_enetsw_probe(struct platf
 
 	ret = register_netdev(dev);
 	if (ret)
-		goto out_put_clk;
+		goto out_disable_clk;
 
 	netif_carrier_off(dev);
 	platform_set_drvdata(pdev, dev);
@@ -2802,6 +2811,9 @@ static int bcm_enetsw_probe(struct platf
 
 	return 0;
 
+out_disable_clk:
+	clk_disable_unprepare(priv->mac_clk);
+
 out_put_clk:
 	clk_put(priv->mac_clk);
 
@@ -2833,6 +2845,9 @@ static int bcm_enetsw_remove(struct plat
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
+	clk_disable_unprepare(priv->mac_clk);
+	clk_put(priv->mac_clk);
+
 	free_netdev(dev);
 	return 0;
 }

[PATCH 4.4 09/31] bcm63xx_enet: do not write to random DMA channel on BCM6345

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonas Gorski <jonas.gorski@gmail.com>

commit d6213c1f2ad54a964b77471690264ed685718928 upstream.

The DMA controller regs actually point to DMA channel 0, so the write to
ENETDMA_CFG_REG will actually modify a random DMA channel.

Since DMA controller registers do not exist on BCM6345, guard the write
with the usual check for dma_has_sram.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/broadcom/bcm63xx_enet.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1063,7 +1063,8 @@ static int bcm_enet_open(struct net_devi
 	val = enet_readl(priv, ENET_CTL_REG);
 	val |= ENET_CTL_ENABLE_MASK;
 	enet_writel(priv, val, ENET_CTL_REG);
-	enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
+	if (priv->dma_has_sram)
+		enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
 	enet_dmac_writel(priv, priv->dma_chan_en_mask,
 			 ENETDMAC_CHANCFG, priv->rx_chan);
 

[PATCH 4.4 10/31] crypto: crypto4xx - remove bad list_del

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Lamparter <chunkeey@googlemail.com>

commit a728a196d253530f17da5c86dc7dfbe58c5f7094 upstream.

alg entries are only added to the list, after the registration
was successful. If the registration failed, it was never added
to the list in the first place.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/amcc/crypto4xx_core.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -1029,12 +1029,10 @@ int crypto4xx_register_alg(struct crypto
 			break;
 		}
 
-		if (rc) {
-			list_del(&alg->entry);
+		if (rc)
 			kfree(alg);
-		} else {
+		else
 			list_add_tail(&alg->entry, &sec_dev->alg_list);
-		}
 	}
 
 	return 0;

[PATCH 4.4 11/31] crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Lamparter <chunkeey@googlemail.com>

commit 5d59ad6eea82ef8df92b4109615a0dde9d8093e9 upstream.

If one of the later memory allocations in rypto4xx_build_pdr()
fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed.

crypto4xx_build_sdr() has the same issue with dev->sdr.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/amcc/crypto4xx_core.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -207,7 +207,7 @@ static u32 crypto4xx_build_pdr(struct cr
 				  dev->pdr_pa);
 		return -ENOMEM;
 	}
-	memset(dev->pdr, 0,  sizeof(struct ce_pd) * PPC4XX_NUM_PD);
+	memset(dev->pdr, 0, sizeof(struct ce_pd) * PPC4XX_NUM_PD);
 	dev->shadow_sa_pool = dma_alloc_coherent(dev->core_dev->device,
 				   256 * PPC4XX_NUM_PD,
 				   &dev->shadow_sa_pool_pa,
@@ -240,13 +240,15 @@ static u32 crypto4xx_build_pdr(struct cr
 
 static void crypto4xx_destroy_pdr(struct crypto4xx_device *dev)
 {
-	if (dev->pdr != NULL)
+	if (dev->pdr)
 		dma_free_coherent(dev->core_dev->device,
 				  sizeof(struct ce_pd) * PPC4XX_NUM_PD,
 				  dev->pdr, dev->pdr_pa);
+
 	if (dev->shadow_sa_pool)
 		dma_free_coherent(dev->core_dev->device, 256 * PPC4XX_NUM_PD,
 				  dev->shadow_sa_pool, dev->shadow_sa_pool_pa);
+
 	if (dev->shadow_sr_pool)
 		dma_free_coherent(dev->core_dev->device,
 			sizeof(struct sa_state_record) * PPC4XX_NUM_PD,
@@ -416,12 +418,12 @@ static u32 crypto4xx_build_sdr(struct cr
 
 static void crypto4xx_destroy_sdr(struct crypto4xx_device *dev)
 {
-	if (dev->sdr != NULL)
+	if (dev->sdr)
 		dma_free_coherent(dev->core_dev->device,
 				  sizeof(struct ce_sd) * PPC4XX_NUM_SD,
 				  dev->sdr, dev->sdr_pa);
 
-	if (dev->scatter_buffer_va != NULL)
+	if (dev->scatter_buffer_va)
 		dma_free_coherent(dev->core_dev->device,
 				  dev->scatter_buffer_size * PPC4XX_NUM_SD,
 				  dev->scatter_buffer_va,
@@ -1186,7 +1188,7 @@ static int crypto4xx_probe(struct platfo
 
 	rc = crypto4xx_build_gdr(core_dev->dev);
 	if (rc)
-		goto err_build_gdr;
+		goto err_build_pdr;
 
 	rc = crypto4xx_build_sdr(core_dev->dev);
 	if (rc)
@@ -1228,12 +1230,11 @@ err_iomap:
 err_request_irq:
 	irq_dispose_mapping(core_dev->irq);
 	tasklet_kill(&core_dev->tasklet);
-	crypto4xx_destroy_sdr(core_dev->dev);
 err_build_sdr:
+	crypto4xx_destroy_sdr(core_dev->dev);
 	crypto4xx_destroy_gdr(core_dev->dev);
-err_build_gdr:
-	crypto4xx_destroy_pdr(core_dev->dev);
 err_build_pdr:
+	crypto4xx_destroy_pdr(core_dev->dev);
 	kfree(core_dev->dev);
 err_alloc_dev:
 	kfree(core_dev);

[PATCH 4.4 12/31] atm: zatm: Fix potential Spectre v1

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit ced9e191501e52b95e1b57b8e0db00943869eed0 ]

pool can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/atm/zatm.c:1491 zatm_ioctl() warn: potential spectre issue
'zatm_dev->pool_info' (local cap)

Fix this by sanitizing pool before using it to index
zatm_dev->pool_info

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/atm/zatm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1481,6 +1481,8 @@ static int zatm_ioctl(struct atm_dev *de
 					return -EFAULT;
 				if (pool < 0 || pool > ZATM_LAST_POOL)
 					return -EINVAL;
+				pool = array_index_nospec(pool,
+							  ZATM_LAST_POOL + 1);
 				if (copy_from_user(&info,
 				    &((struct zatm_pool_req __user *) arg)->info,
 				    sizeof(info))) return -EFAULT;

[PATCH 4.4 15/31] net/mlx5: Fix incorrect raw command length parsing

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Vesker <valex@mellanox.com>

[ Upstream commit 603b7bcff824740500ddfa001d7a7168b0b38542 ]

The NULL character was not set correctly for the string containing
the command length, this caused failures reading the output of the
command due to a random length. The fix is to initialize the output
length string.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -1126,7 +1126,7 @@ static ssize_t outlen_write(struct file
 {
 	struct mlx5_core_dev *dev = filp->private_data;
 	struct mlx5_cmd_debug *dbg = &dev->cmd.dbg;
-	char outlen_str[8];
+	char outlen_str[8] = {0};
 	int outlen;
 	void *ptr;
 	int err;
@@ -1141,8 +1141,6 @@ static ssize_t outlen_write(struct file
 	if (copy_from_user(outlen_str, buf, count))
 		return -EFAULT;
 
-	outlen_str[7] = 0;
-
 	err = sscanf(outlen_str, "%d", &outlen);
 	if (err < 0)
 		return err;

[PATCH 4.4 16/31] net: sungem: fix rx checksum support

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 12b03558cef6d655d0d394f5e98a6fd07c1f6c0f ]

After commit 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE
are friends"), sungem owners reported the infamous "eth0: hw csum failure"
message.

CHECKSUM_COMPLETE has in fact never worked for this driver, but this
was masked by the fact that upper stacks had to strip the FCS, and
therefore skb->ip_summed was set back to CHECKSUM_NONE before
my recent change.

Driver configures a number of bytes to skip when the chip computes
the checksum, and for some reason only half of the Ethernet header
was skipped.

Then a second problem is that we should strip the FCS by default,
unless the driver is updated to eventually support NETIF_F_RXFCS in
the future.

Finally, a driver should check if NETIF_F_RXCSUM feature is enabled
or not, so that the admin can turn off rx checksum if wanted.

Many thanks to Andreas Schwab and Mathieu Malaterre for their
help in debugging this issue.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/sungem.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

--- a/drivers/net/ethernet/sun/sungem.c
+++ b/drivers/net/ethernet/sun/sungem.c
@@ -60,8 +60,7 @@
 #include <linux/sungem_phy.h>
 #include "sungem.h"
 
-/* Stripping FCS is causing problems, disabled for now */
-#undef STRIP_FCS
+#define STRIP_FCS
 
 #define DEFAULT_MSG	(NETIF_MSG_DRV		| \
 			 NETIF_MSG_PROBE	| \
@@ -435,7 +434,7 @@ static int gem_rxmac_reset(struct gem *g
 	writel(desc_dma & 0xffffffff, gp->regs + RXDMA_DBLOW);
 	writel(RX_RING_SIZE - 4, gp->regs + RXDMA_KICK);
 	val = (RXDMA_CFG_BASE | (RX_OFFSET << 10) |
-	       ((14 / 2) << 13) | RXDMA_CFG_FTHRESH_128);
+	       (ETH_HLEN << 13) | RXDMA_CFG_FTHRESH_128);
 	writel(val, gp->regs + RXDMA_CFG);
 	if (readl(gp->regs + GREG_BIFCFG) & GREG_BIFCFG_M66EN)
 		writel(((5 & RXDMA_BLANK_IPKTS) |
@@ -760,7 +759,6 @@ static int gem_rx(struct gem *gp, int wo
 	struct net_device *dev = gp->dev;
 	int entry, drops, work_done = 0;
 	u32 done;
-	__sum16 csum;
 
 	if (netif_msg_rx_status(gp))
 		printk(KERN_DEBUG "%s: rx interrupt, done: %d, rx_new: %d\n",
@@ -855,9 +853,13 @@ static int gem_rx(struct gem *gp, int wo
 			skb = copy_skb;
 		}
 
-		csum = (__force __sum16)htons((status & RXDCTRL_TCPCSUM) ^ 0xffff);
-		skb->csum = csum_unfold(csum);
-		skb->ip_summed = CHECKSUM_COMPLETE;
+		if (likely(dev->features & NETIF_F_RXCSUM)) {
+			__sum16 csum;
+
+			csum = (__force __sum16)htons((status & RXDCTRL_TCPCSUM) ^ 0xffff);
+			skb->csum = csum_unfold(csum);
+			skb->ip_summed = CHECKSUM_COMPLETE;
+		}
 		skb->protocol = eth_type_trans(skb, gp->dev);
 
 		napi_gro_receive(&gp->napi, skb);
@@ -1755,7 +1757,7 @@ static void gem_init_dma(struct gem *gp)
 	writel(0, gp->regs + TXDMA_KICK);
 
 	val = (RXDMA_CFG_BASE | (RX_OFFSET << 10) |
-	       ((14 / 2) << 13) | RXDMA_CFG_FTHRESH_128);
+	       (ETH_HLEN << 13) | RXDMA_CFG_FTHRESH_128);
 	writel(val, gp->regs + RXDMA_CFG);
 
 	writel(desc_dma >> 32, gp->regs + RXDMA_DBHI);
@@ -2973,8 +2975,8 @@ static int gem_init_one(struct pci_dev *
 	pci_set_drvdata(pdev, dev);
 
 	/* We can do scatter/gather and HW checksum */
-	dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM;
-	dev->features |= dev->hw_features | NETIF_F_RXCSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
+	dev->features = dev->hw_features;
 	if (pci_using_dac)
 		dev->features |= NETIF_F_HIGHDMA;
 

[PATCH 4.4 17/31] qed: Limit msix vectors in kdump kernel to the minimum required count.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com>

[ Upstream commit bb7858ba1102f82470a917e041fd23e6385c31be ]

Memory size is limited in the kdump kernel environment. Allocation of more
msix-vectors (or queues) consumes few tens of MBs of memory, which might
lead to the kdump kernel failure.
This patch adds changes to limit the number of MSI-X vectors in kdump
kernel to minimum required value (i.e., 2 per engine).

Fixes: fe56b9e6a ("qed: Add module with basic common support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -22,6 +22,7 @@
 #include <linux/etherdevice.h>
 #include <linux/vmalloc.h>
 #include <linux/qed/qed_if.h>
+#include <linux/crash_dump.h>
 
 #include "qed.h"
 #include "qed_sp.h"
@@ -634,6 +635,14 @@ static int qed_slowpath_setup_int(struct
 	/* We want a minimum of one slowpath and one fastpath vector per hwfn */
 	cdev->int_params.in.min_msix_cnt = cdev->num_hwfns * 2;
 
+	if (is_kdump_kernel()) {
+		DP_INFO(cdev,
+			"Kdump kernel: Limit the max number of requested MSI-X vectors to %hd\n",
+			cdev->int_params.in.min_msix_cnt);
+		cdev->int_params.in.num_vectors =
+			cdev->int_params.in.min_msix_cnt;
+	}
+
 	rc = qed_set_int_mode(cdev, false);
 	if (rc)  {
 		DP_ERR(cdev, "qed_slowpath_setup_int ERR\n");

[PATCH 4.4 19/31] tcp: fix Fast Open key endianness

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yuchung Cheng <ycheng@google.com>

[ Upstream commit c860e997e9170a6d68f9d1e6e2cf61f572191aaf ]

Fast Open key could be stored in different endian based on the CPU.
Previously hosts in different endianness in a server farm using
the same key config (sysctl value) would produce different cookies.
This patch fixes it by always storing it as little endian to keep
same API for LE hosts.

Reported-by: Daniele Iamartino <danielei@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/sysctl_net_ipv4.c |   18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -213,8 +213,9 @@ static int proc_tcp_fastopen_key(struct
 {
 	struct ctl_table tbl = { .maxlen = (TCP_FASTOPEN_KEY_LENGTH * 2 + 10) };
 	struct tcp_fastopen_context *ctxt;
-	int ret;
 	u32  user_key[4]; /* 16 bytes, matching TCP_FASTOPEN_KEY_LENGTH */
+	__le32 key[4];
+	int ret, i;
 
 	tbl.data = kmalloc(tbl.maxlen, GFP_KERNEL);
 	if (!tbl.data)
@@ -223,11 +224,14 @@ static int proc_tcp_fastopen_key(struct
 	rcu_read_lock();
 	ctxt = rcu_dereference(tcp_fastopen_ctx);
 	if (ctxt)
-		memcpy(user_key, ctxt->key, TCP_FASTOPEN_KEY_LENGTH);
+		memcpy(key, ctxt->key, TCP_FASTOPEN_KEY_LENGTH);
 	else
-		memset(user_key, 0, sizeof(user_key));
+		memset(key, 0, sizeof(key));
 	rcu_read_unlock();
 
+	for (i = 0; i < ARRAY_SIZE(key); i++)
+		user_key[i] = le32_to_cpu(key[i]);
+
 	snprintf(tbl.data, tbl.maxlen, "%08x-%08x-%08x-%08x",
 		user_key[0], user_key[1], user_key[2], user_key[3]);
 	ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
@@ -243,12 +247,16 @@ static int proc_tcp_fastopen_key(struct
 		 * first invocation of tcp_fastopen_cookie_gen
 		 */
 		tcp_fastopen_init_key_once(false);
-		tcp_fastopen_reset_cipher(user_key, TCP_FASTOPEN_KEY_LENGTH);
+
+		for (i = 0; i < ARRAY_SIZE(user_key); i++)
+			key[i] = cpu_to_le32(user_key[i]);
+
+		tcp_fastopen_reset_cipher(key, TCP_FASTOPEN_KEY_LENGTH);
 	}
 
 bad_key:
 	pr_debug("proc FO key set 0x%x-%x-%x-%x <- 0x%s: %u\n",
-	       user_key[0], user_key[1], user_key[2], user_key[3],
+		 user_key[0], user_key[1], user_key[2], user_key[3],
 	       (char *)tbl.data, ret);
 	kfree(tbl.data);
 	return ret;

[PATCH 4.4 21/31] vhost_net: validate sock before trying to put its fd

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit b8f1f65882f07913157c44673af7ec0b308d03eb ]

Sock will be NULL if we pass -1 to vhost_net_set_backend(), but when
we meet errors during ubuf allocation, the code does not check for
NULL before calling sockfd_put(), this will lead NULL
dereferencing. Fixing by checking sock pointer before.

Fixes: bab632d69ee4 ("vhost: vhost TX zero-copy support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -955,7 +955,8 @@ err_used:
 	if (ubufs)
 		vhost_net_ubuf_put_wait_and_free(ubufs);
 err_ubufs:
-	sockfd_put(sock);
+	if (sock)
+		sockfd_put(sock);
 err_vq:
 	mutex_unlock(&vq->mutex);
 err:

[PATCH 4.4 22/31] net_sched: blackhole: tell upper qdisc about dropped packets

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit 7e85dc8cb35abf16455f1511f0670b57c1a84608 ]

When blackhole is used on top of classful qdisc like hfsc it breaks
qlen and backlog counters because packets are disappear without notice.

In HFSC non-zero qlen while all classes are inactive triggers warning:
WARNING: ... at net/sched/sch_hfsc.c:1393 hfsc_dequeue+0xba4/0xe90 [sch_hfsc]
and schedules watchdog work endlessly.

This patch return __NET_XMIT_BYPASS in addition to NET_XMIT_SUCCESS,
this flag tells upper layer: this packet is gone and isn't queued.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_blackhole.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sched/sch_blackhole.c
+++ b/net/sched/sch_blackhole.c
@@ -20,7 +20,7 @@
 static int blackhole_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 {
 	qdisc_drop(skb, sch);
-	return NET_XMIT_SUCCESS;
+	return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
 }
 
 static struct sk_buff *blackhole_dequeue(struct Qdisc *sch)

[PATCH 4.4 23/31] net/mlx5: Fix command interface race in polling mode

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Vesker <valex@mellanox.com>

[ Upstream commit d412c31dae053bf30a1bc15582a9990df297a660 ]

The command interface can work in two modes: Events and Polling.
In the general case, each time we invoke a command, a work is
queued to handle it.

When working in events, the interrupt handler completes the
command execution. On the other hand, when working in polling
mode, the work itself completes it.

Due to a bug in the work handler, a command could have been
completed by the interrupt handler, while the work handler
hasn't finished yet, causing the it to complete once again
if the command interface mode was changed from Events to
polling after the interrupt handler was called.

mlx5_unload_one()
        mlx5_stop_eqs()
                // Destroy the EQ before cmd EQ
                ...cmd_work_handler()
                        write_doorbell()
                        --> EVENT_TYPE_CMD
                                mlx5_cmd_comp_handler() // First free
                                        free_ent(cmd, ent->idx)
                                        complete(&ent->done)

        <-- mlx5_stop_eqs //cmd was complete
                // move to polling before destroying the last cmd EQ
                mlx5_cmd_use_polling()
                        cmd->mode = POLL;

                --> cmd_work_handler (continues)
                        if (cmd->mode == POLL)
                                mlx5_cmd_comp_handler() // Double free

The solution is to store the cmd->mode before writing the doorbell.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -643,6 +643,7 @@ static void cmd_work_handler(struct work
 	struct semaphore *sem;
 	unsigned long flags;
 	int alloc_ret;
+	int cmd_mode;
 
 	sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
 	down(sem);
@@ -688,6 +689,7 @@ static void cmd_work_handler(struct work
 	set_signature(ent, !cmd->checksum_disabled);
 	dump_command(dev, ent, 1);
 	ent->ts1 = ktime_get_ns();
+	cmd_mode = cmd->mode;
 
 	/* ring doorbell after the descriptor is valid */
 	mlx5_core_dbg(dev, "writing 0x%x to command doorbell\n", 1 << ent->idx);
@@ -695,7 +697,7 @@ static void cmd_work_handler(struct work
 	iowrite32be(1 << ent->idx, &dev->iseg->cmd_dbell);
 	mmiowb();
 	/* if not in polling don't use ent after this point */
-	if (cmd->mode == CMD_MODE_POLLING) {
+	if (cmd_mode == CMD_MODE_POLLING) {
 		poll_timeout(ent);
 		/* make sure we read the descriptor after ownership is SW */
 		rmb();

[PATCH 4.4 24/31] net: cxgb3_main: fix potential Spectre v1

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 676bcfece19f83621e905aa55b5ed2d45cc4f2d3 upstream.

t.qset_idx can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl()
warn: potential spectre issue 'adapter->msix_info'

Fix this by sanitizing t.qset_idx before using it to index
adapter->msix_info

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -50,6 +50,7 @@
 #include <linux/stringify.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/nospec.h>
 #include <asm/uaccess.h>
 
 #include "common.h"
@@ -2256,6 +2257,7 @@ static int cxgb_extension_ioctl(struct n
 
 		if (t.qset_idx >= nqsets)
 			return -EINVAL;
+		t.qset_idx = array_index_nospec(t.qset_idx, nqsets);
 
 		q = &adapter->params.sge.qset[q1 + t.qset_idx];
 		t.rspq_size = q->rspq_size;

[PATCH 4.4 25/31] rtlwifi: rtl8821ae: fix firmware is not ready to run

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ping-Ke Shih <pkshih@realtek.com>

commit 9a98302de19991d51e067b88750585203b2a3ab6 upstream.

Without this patch, firmware will not run properly on rtl8821ae, and it
causes bad user experience. For example, bad connection performance with
low rate, higher power consumption, and so on.

rtl8821ae uses two kinds of firmwares for normal and WoWlan cases, and
each firmware has firmware data buffer and size individually. Original
code always overwrite size of normal firmware rtlpriv->rtlhal.fwsize, and
this mismatch causes firmware checksum error, then firmware can't start.

In this situation, driver gives message "Firmware is not ready to run!".

Fixes: fe89707f0afa ("rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmware")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Cc: Stable <stable@vger.kernel.org> # 4.0+
Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtlwifi/core.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/net/wireless/realtek/rtlwifi/core.c
+++ b/drivers/net/wireless/realtek/rtlwifi/core.c
@@ -135,7 +135,6 @@ found_alt:
 		       firmware->size);
 		rtlpriv->rtlhal.wowlan_fwsize = firmware->size;
 	}
-	rtlpriv->rtlhal.fwsize = firmware->size;
 	release_firmware(firmware);
 }
 

[PATCH 4.4 26/31] MIPS: Call dump_stack() from show_regs()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@mips.com>

commit 5a267832c2ec47b2dad0fdb291a96bb5b8869315 upstream.

The generic nmi_cpu_backtrace() function calls show_regs() when a struct
pt_regs is available, and dump_stack() otherwise. If we were to make use
of the generic nmi_cpu_backtrace() with MIPS' current implementation of
show_regs() this would mean that we see only register data with no
accompanying stack information, in contrast with our current
implementation which calls dump_stack() regardless of whether register
state is available.

In preparation for making use of the generic nmi_cpu_backtrace() to
implement arch_trigger_cpumask_backtrace(), have our implementation of
show_regs() call dump_stack() and drop the explicit dump_stack() call in
arch_dump_stack() which is invoked by arch_trigger_cpumask_backtrace().

This will allow the output we produce to remain the same after a later
patch switches to using nmi_cpu_backtrace(). It may mean that we produce
extra stack output in other uses of show_regs(), but this:

  1) Seems harmless.
  2) Is good for consistency between arch_trigger_cpumask_backtrace()
     and other users of show_regs().
  3) Matches the behaviour of the ARM & PowerPC architectures.

Marked for stable back to v4.9 as a prerequisite of the following patch
"MIPS: Call dump_stack() from show_regs()".

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19596/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/process.c |    4 ++--
 arch/mips/kernel/traps.c   |    1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -637,8 +637,8 @@ static void arch_dump_stack(void *info)
 
 	if (regs)
 		show_regs(regs);
-
-	dump_stack();
+	else
+		dump_stack();
 }
 
 void arch_trigger_all_cpu_backtrace(bool include_self)
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -344,6 +344,7 @@ static void __show_regs(const struct pt_
 void show_regs(struct pt_regs *regs)
 {
 	__show_regs((struct pt_regs *)regs);
+	dump_stack();
 }
 
 void show_registers(struct pt_regs *regs)

[PATCH 4.4 27/31] MIPS: Use async IPIs for arch_trigger_cpumask_backtrace()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@mips.com>

commit b63e132b6433a41cf311e8bc382d33fd2b73b505 upstream.

The current MIPS implementation of arch_trigger_cpumask_backtrace() is
broken because it attempts to use synchronous IPIs despite the fact that
it may be run with interrupts disabled.

This means that when arch_trigger_cpumask_backtrace() is invoked, for
example by the RCU CPU stall watchdog, we may:

  - Deadlock due to use of synchronous IPIs with interrupts disabled,
    causing the CPU that's attempting to generate the backtrace output
    to hang itself.

  - Not succeed in generating the desired output from remote CPUs.

  - Produce warnings about this from smp_call_function_many(), for
    example:

    [42760.526910] INFO: rcu_sched detected stalls on CPUs/tasks:
    [42760.535755]  0-...!: (1 GPs behind) idle=ade/140000000000000/0 softirq=526944/526945 fqs=0
    [42760.547874]  1-...!: (0 ticks this GP) idle=e4a/140000000000000/0 softirq=547885/547885 fqs=0
    [42760.559869]  (detected by 2, t=2162 jiffies, g=266689, c=266688, q=33)
    [42760.568927] ------------[ cut here ]------------
    [42760.576146] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:416 smp_call_function_many+0x88/0x20c
    [42760.587839] Modules linked in:
    [42760.593152] CPU: 2 PID: 1216 Comm: sh Not tainted 4.15.4-00373-gee058bb4d0c2 #2
    [42760.603767] Stack : 8e09bd20 8e09bd20 8e09bd20 fffffff0 00000007 00000006 00000000 8e09bca8
    [42760.616937]         95b2b379 95b2b379 807a0080 00000007 81944518 0000018a 00000032 00000000
    [42760.630095]         00000000 00000030 80000000 00000000 806eca74 00000009 8017e2b8 000001a0
    [42760.643169]         00000000 00000002 00000000 8e09baa4 00000008 808b8008 86d69080 8e09bca0
    [42760.656282]         8e09ad50 805e20aa 00000000 00000000 00000000 8017e2b8 00000009 801070ca
    [42760.669424]         ...
    [42760.673919] Call Trace:
    [42760.678672] [<27fde568>] show_stack+0x70/0xf0
    [42760.685417] [<84751641>] dump_stack+0xaa/0xd0
    [42760.692188] [<699d671c>] __warn+0x80/0x92
    [42760.698549] [<68915d41>] warn_slowpath_null+0x28/0x36
    [42760.705912] [<f7c76c1c>] smp_call_function_many+0x88/0x20c
    [42760.713696] [<6bbdfc2a>] arch_trigger_cpumask_backtrace+0x30/0x4a
    [42760.722216] [<f845bd33>] rcu_dump_cpu_stacks+0x6a/0x98
    [42760.729580] [<796e7629>] rcu_check_callbacks+0x672/0x6ac
    [42760.737476] [<059b3b43>] update_process_times+0x18/0x34
    [42760.744981] [<6eb94941>] tick_sched_handle.isra.5+0x26/0x38
    [42760.752793] [<478d3d70>] tick_sched_timer+0x1c/0x50
    [42760.759882] [<e56ea39f>] __hrtimer_run_queues+0xc6/0x226
    [42760.767418] [<e88bbcae>] hrtimer_interrupt+0x88/0x19a
    [42760.775031] [<6765a19e>] gic_compare_interrupt+0x2e/0x3a
    [42760.782761] [<0558bf5f>] handle_percpu_devid_irq+0x78/0x168
    [42760.790795] [<90c11ba2>] generic_handle_irq+0x1e/0x2c
    [42760.798117] [<1b6d462c>] gic_handle_local_int+0x38/0x86
    [42760.805545] [<b2ada1c7>] gic_irq_dispatch+0xa/0x14
    [42760.812534] [<90c11ba2>] generic_handle_irq+0x1e/0x2c
    [42760.820086] [<c7521934>] do_IRQ+0x16/0x20
    [42760.826274] [<9aef3ce6>] plat_irq_dispatch+0x62/0x94
    [42760.833458] [<6a94b53c>] except_vec_vi_end+0x70/0x78
    [42760.840655] [<22284043>] smp_call_function_many+0x1ba/0x20c
    [42760.848501] [<54022b58>] smp_call_function+0x1e/0x2c
    [42760.855693] [<ab9fc705>] flush_tlb_mm+0x2a/0x98
    [42760.862730] [<0844cdd0>] tlb_flush_mmu+0x1c/0x44
    [42760.869628] [<cb259b74>] arch_tlb_finish_mmu+0x26/0x3e
    [42760.877021] [<1aeaaf74>] tlb_finish_mmu+0x18/0x66
    [42760.883907] [<b3fce717>] exit_mmap+0x76/0xea
    [42760.890428] [<c4c8a2f6>] mmput+0x80/0x11a
    [42760.896632] [<a41a08f4>] do_exit+0x1f4/0x80c
    [42760.903158] [<ee01cef6>] do_group_exit+0x20/0x7e
    [42760.909990] [<13fa8d54>] __wake_up_parent+0x0/0x1e
    [42760.917045] [<46cf89d0>] smp_call_function_many+0x1a2/0x20c
    [42760.924893] [<8c21a93b>] syscall_common+0x14/0x1c
    [42760.931765] ---[ end trace 02aa09da9dc52a60 ]---
    [42760.938342] ------------[ cut here ]------------
    [42760.945311] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:291 smp_call_function_single+0xee/0xf8
    ...

This patch switches MIPS' arch_trigger_cpumask_backtrace() to use async
IPIs & smp_call_function_single_async() in order to resolve this
problem. We ensure use of the pre-allocated call_single_data_t
structures is serialized by maintaining a cpumask indicating that
they're busy, and refusing to attempt to send an IPI when a CPU's bit is
set in this mask. This should only happen if a CPU hasn't responded to a
previous backtrace IPI - ie. if it's hung - and we print a warning to
the console in this case.

I've marked this for stable branches as far back as v4.9, to which it
applies cleanly. Strictly speaking the faulty MIPS implementation can be
traced further back to commit 856839b76836 ("MIPS: Add
arch_trigger_all_cpu_backtrace() function") in v3.19, but kernel
versions v3.19 through v4.8 will require further work to backport due to
the rework performed in commit 9a01c3ed5cdb ("nmi_backtrace: add more
trigger_*_cpu_backtrace() methods").

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19597/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.9+
Fixes: 856839b76836 ("MIPS: Add arch_trigger_all_cpu_backtrace() function")
Fixes: 9a01c3ed5cdb ("nmi_backtrace: add more trigger_*_cpu_backtrace() methods")
[ Huacai: backported to 4.4: Restruction since generic NMI solution is unavailable ]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/kernel/process.c |   29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -629,21 +629,48 @@ unsigned long arch_align_stack(unsigned
 	return sp & ALMASK;
 }
 
+static DEFINE_PER_CPU(struct call_single_data, backtrace_csd);
+static struct cpumask backtrace_csd_busy;
+
 static void arch_dump_stack(void *info)
 {
 	struct pt_regs *regs;
+	static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED;
 
+	arch_spin_lock(&lock);
 	regs = get_irq_regs();
 
 	if (regs)
 		show_regs(regs);
 	else
 		dump_stack();
+	arch_spin_unlock(&lock);
+
+	cpumask_clear_cpu(smp_processor_id(), &backtrace_csd_busy);
 }
 
 void arch_trigger_all_cpu_backtrace(bool include_self)
 {
-	smp_call_function(arch_dump_stack, NULL, 1);
+	struct call_single_data *csd;
+	int cpu;
+
+	for_each_cpu(cpu, cpu_online_mask) {
+		/*
+		 * If we previously sent an IPI to the target CPU & it hasn't
+		 * cleared its bit in the busy cpumask then it didn't handle
+		 * our previous IPI & it's not safe for us to reuse the
+		 * call_single_data_t.
+		 */
+		if (cpumask_test_and_set_cpu(cpu, &backtrace_csd_busy)) {
+			pr_warn("Unable to send backtrace IPI to CPU%u - perhaps it hung?\n",
+				cpu);
+			continue;
+		}
+
+		csd = &per_cpu(backtrace_csd, cpu);
+		csd->func = arch_dump_stack;
+		smp_call_function_single_async(cpu, csd);
+	}
 }
 
 int mips_get_process_fp_mode(struct task_struct *task)

[PATCH 4.4 28/31] netfilter: ebtables: reject non-bridge targets

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit 11ff7288beb2b7da889a014aff0a7b80bf8efcf3 upstream.

the ebtables evaluation loop expects targets to return
positive values (jumps), or negative values (absolute verdicts).

This is completely different from what xtables does.
In xtables, targets are expected to return the standard netfilter
verdicts, i.e. NF_DROP, NF_ACCEPT, etc.

ebtables will consider these as jumps.

Therefore reject any target found due to unspec fallback.
v2: also reject watchers.  ebtables ignores their return value, so
a target that assumes skb ownership (and returns NF_STOLEN) causes
use-after-free.

The only watchers in the 'ebtables' front-end are log and nflog;
both have AF_BRIDGE specific wrappers on kernel side.

Reported-by: syzbot+2b43f681169a2a0d306a@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bridge/netfilter/ebtables.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -404,6 +404,12 @@ ebt_check_watcher(struct ebt_entry_watch
 	watcher = xt_request_find_target(NFPROTO_BRIDGE, w->u.name, 0);
 	if (IS_ERR(watcher))
 		return PTR_ERR(watcher);
+
+	if (watcher->family != NFPROTO_BRIDGE) {
+		module_put(watcher->me);
+		return -ENOENT;
+	}
+
 	w->u.watcher = watcher;
 
 	par->target   = watcher;
@@ -724,6 +730,13 @@ ebt_check_entry(struct ebt_entry *e, str
 		goto cleanup_watchers;
 	}
 
+	/* Reject UNSPEC, xtables verdicts/return values are incompatible */
+	if (target->family != NFPROTO_BRIDGE) {
+		module_put(target->me);
+		ret = -ENOENT;
+		goto cleanup_watchers;
+	}
+
 	t->u.target = target;
 	if (t->u.target == &ebt_standard_target) {
 		if (gap < sizeof(struct ebt_standard_target)) {

[PATCH 4.4 29/31] KEYS: DNS: fix parsing multiple options

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit c604cb767049b78b3075497b80ebb8fd530ea2cc upstream.

My recent fix for dns_resolver_preparse() printing very long strings was
incomplete, as shown by syzbot which still managed to hit the
WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key:

    precision 50001 too large
    WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0

The bug this time isn't just a printing bug, but also a logical error
when multiple options ("#"-separated strings) are given in the key
payload.  Specifically, when separating an option string into name and
value, if there is no value then the name is incorrectly considered to
end at the end of the key payload, rather than the end of the current
option.  This bypasses validation of the option length, and also means
that specifying multiple options is broken -- which presumably has gone
unnoticed as there is currently only one valid option anyway.

A similar problem also applied to option values, as the kstrtoul() when
parsing the "dnserror" option will read past the end of the current
option and into the next option.

Fix these bugs by correctly computing the length of the option name and
by copying the option value, null-terminated, into a temporary buffer.

Reproducer for the WARN_ONCE() that syzbot hit:

    perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s

Reproducer for "dnserror" option being parsed incorrectly (expected
behavior is to fail when seeing the unknown option "foo", actual
behavior was to read the dnserror value as "1#foo" and fail there):

    perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/dns_resolver/dns_key.c |   30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

--- a/net/dns_resolver/dns_key.c
+++ b/net/dns_resolver/dns_key.c
@@ -87,35 +87,39 @@ dns_resolver_preparse(struct key_prepars
 		opt++;
 		kdebug("options: '%s'", opt);
 		do {
+			int opt_len, opt_nlen;
 			const char *eq;
-			int opt_len, opt_nlen, opt_vlen, tmp;
+			char optval[128];
 
 			next_opt = memchr(opt, '#', end - opt) ?: end;
 			opt_len = next_opt - opt;
-			if (opt_len <= 0 || opt_len > 128) {
+			if (opt_len <= 0 || opt_len > sizeof(optval)) {
 				pr_warn_ratelimited("Invalid option length (%d) for dns_resolver key\n",
 						    opt_len);
 				return -EINVAL;
 			}
 
-			eq = memchr(opt, '=', opt_len) ?: end;
-			opt_nlen = eq - opt;
-			eq++;
-			opt_vlen = next_opt - eq; /* will be -1 if no value */
-
-			tmp = opt_vlen >= 0 ? opt_vlen : 0;
-			kdebug("option '%*.*s' val '%*.*s'",
-			       opt_nlen, opt_nlen, opt, tmp, tmp, eq);
+			eq = memchr(opt, '=', opt_len);
+			if (eq) {
+				opt_nlen = eq - opt;
+				eq++;
+				memcpy(optval, eq, next_opt - eq);
+				optval[next_opt - eq] = '\0';
+			} else {
+				opt_nlen = opt_len;
+				optval[0] = '\0';
+			}
+
+			kdebug("option '%*.*s' val '%s'",
+			       opt_nlen, opt_nlen, opt, optval);
 
 			/* see if it's an error number representing a DNS error
 			 * that's to be recorded as the result in this key */
 			if (opt_nlen == sizeof(DNS_ERRORNO_OPTION) - 1 &&
 			    memcmp(opt, DNS_ERRORNO_OPTION, opt_nlen) == 0) {
 				kdebug("dns error number option");
-				if (opt_vlen <= 0)
-					goto bad_option_value;
 
-				ret = kstrtoul(eq, 10, &derrno);
+				ret = kstrtoul(optval, 10, &derrno);
 				if (ret < 0)
 					goto bad_option_value;
 

[PATCH 4.4 30/31] rds: avoid unenecessary cong_update in loop transport

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Santosh Shilimkar <santosh.shilimkar@oracle.com>

commit f1693c63ab133d16994cc50f773982b5905af264 upstream.

Loop transport which is self loopback, remote port congestion
update isn't relevant. Infact the xmit path already ignores it.
Receive path needs to do the same.

Reported-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/rds/loop.c |    1 +
 net/rds/rds.h  |    5 +++++
 net/rds/recv.c |    5 +++++
 3 files changed, 11 insertions(+)

--- a/net/rds/loop.c
+++ b/net/rds/loop.c
@@ -191,4 +191,5 @@ struct rds_transport rds_loop_transport
 	.inc_copy_to_user	= rds_message_inc_copy_to_user,
 	.inc_free		= rds_loop_inc_free,
 	.t_name			= "loopback",
+	.t_type			= RDS_TRANS_LOOP,
 };
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -401,6 +401,11 @@ struct rds_notifier {
 	int			n_status;
 };
 
+/* Available as part of RDS core, so doesn't need to participate
+ * in get_preferred transport etc
+ */
+#define	RDS_TRANS_LOOP	3
+
 /**
  * struct rds_transport -  transport specific behavioural hooks
  *
--- a/net/rds/recv.c
+++ b/net/rds/recv.c
@@ -76,6 +76,11 @@ static void rds_recv_rcvbuf_delta(struct
 		return;
 
 	rs->rs_rcv_bytes += delta;
+
+	/* loop transport doesn't send/recv congestion updates */
+	if (rs->rs_transport->t_type == RDS_TRANS_LOOP)
+		return;
+
 	now_congested = rs->rs_rcv_bytes > rds_sk_rcvbuf(rs);
 
 	rdsdebug("rs %p (%pI4:%u) recv bytes %d buf %d "

[PATCH 4.4 31/31] net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit 3bc53be9db21040b5d2de4d455f023c8c494aa68 upstream.

syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is
because nfc_llcp_send_ui_frame() is retrying the loop without any delay
when nonblocking nfc_alloc_send_skb() returned NULL.

Since there is no need to use MSG_DONTWAIT if we retry until
sock_alloc_send_pskb() succeeds, let's use blocking call.
Also, in case an unexpected error occurred, let's break the loop
if blocking nfc_alloc_send_skb() failed.

[1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/nfc/llcp_commands.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/net/nfc/llcp_commands.c
+++ b/net/nfc/llcp_commands.c
@@ -754,11 +754,14 @@ int nfc_llcp_send_ui_frame(struct nfc_ll
 		pr_debug("Fragment %zd bytes remaining %zd",
 			 frag_len, remaining_len);
 
-		pdu = nfc_alloc_send_skb(sock->dev, &sock->sk, MSG_DONTWAIT,
+		pdu = nfc_alloc_send_skb(sock->dev, &sock->sk, 0,
 					 frag_len + LLCP_HEADER_SIZE, &err);
 		if (pdu == NULL) {
-			pr_err("Could not allocate PDU\n");
-			continue;
+			pr_err("Could not allocate PDU (error=%d)\n", err);
+			len -= remaining_len;
+			if (len == 0)
+				len = err;
+			break;
 		}
 
 		pdu = llcp_add_header(pdu, dsap, ssap, LLCP_PDU_UI);

Re: [PATCH 4.4 00/31] 4.4.143-stable review

[Nathan Chancellor]

On Fri, Jul 20, 2018 at 02:13:30PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.143 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Jul 22 12:13:28 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.143-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Merged, compiled with -Werror, and installed onto my Pixel 2 XL.

No initial issues noticed in dmesg or general usage.

Thanks!
Nathan

Re: [PATCH 4.4 00/31] 4.4.143-stable review

[Naresh Kamboju]

On 20 July 2018 at 17:43, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.4.143 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jul 22 12:13:28 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.143-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.4.143-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 6c3754d773f4d9c27b2409bae852f83530314d29
git describe: v4.4.142-32-g6c3754d773f4
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.142-32-g6c3754d773f4


No regressions (compared to build v4.4.142-32-g3d09af2f0fb8)


Ran 12130 total tests in the following environments and test suites.

Environments
--------------
- juno-r2 - arm64
- qemu_arm
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

Summary
------------------------------------------------------------------------

kernel: 4.4.143-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.143-rc1-hikey-20180720-238
git commit: 231d528076773b398a822ce163f0ff50bb15304f
git describe: 4.4.143-rc1-hikey-20180720-238
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.143-rc1-hikey-20180720-238

no regressions (compared to build 4.4.142-rc1-hikey-20180718-235)

Ran 2570 total tests in the following environments and test suites.

Environments
--------------
- hi6220-hikey - arm64
- qemu_arm64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-fs-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.4 00/31] 4.4.143-stable review

[Guenter Roeck]

On 07/20/2018 05:13 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.143 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Jul 22 12:13:28 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 148 pass: 148 fail: 0
Qemu test results:
	total: 149 pass: 149 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

[PATCH 4.4 13/31] net: dccp: avoid crash in ccid3_hc_rx_send_feedback()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 74174fe5634ffbf645a7ca5a261571f700b2f332 ]

On fast hosts or malicious bots, we trigger a DCCP_BUG() which
seems excessive.

syzbot reported :

BUG: delta (-6195) <= 0 at net/dccp/ccids/ccid3.c:628/ccid3_hc_rx_send_feedback()
CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.18.0-rc1+ #112
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 ccid3_hc_rx_send_feedback net/dccp/ccids/ccid3.c:628 [inline]
 ccid3_hc_rx_packet_recv.cold.16+0x38/0x71 net/dccp/ccids/ccid3.c:793
 ccid_hc_rx_packet_recv net/dccp/ccid.h:185 [inline]
 dccp_deliver_input_to_ccids+0xf0/0x280 net/dccp/input.c:180
 dccp_rcv_established+0x87/0xb0 net/dccp/input.c:378
 dccp_v4_do_rcv+0x153/0x180 net/dccp/ipv4.c:654
 sk_backlog_rcv include/net/sock.h:914 [inline]
 __sk_receive_skb+0x3ba/0xd80 net/core/sock.c:517
 dccp_v4_rcv+0x10f9/0x1f58 net/dccp/ipv4.c:875
 ip_local_deliver_finish+0x2eb/0xda0 net/ipv4/ip_input.c:215
 NF_HOOK include/linux/netfilter.h:287 [inline]
 ip_local_deliver+0x1e9/0x750 net/ipv4/ip_input.c:256
 dst_input include/net/dst.h:450 [inline]
 ip_rcv_finish+0x823/0x2220 net/ipv4/ip_input.c:396
 NF_HOOK include/linux/netfilter.h:287 [inline]
 ip_rcv+0xa18/0x1284 net/ipv4/ip_input.c:492
 __netif_receive_skb_core+0x2488/0x3680 net/core/dev.c:4628
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693
 process_backlog+0x219/0x760 net/core/dev.c:5373
 napi_poll net/core/dev.c:5771 [inline]
 net_rx_action+0x7da/0x1980 net/core/dev.c:5837
 __do_softirq+0x2e8/0xb17 kernel/softirq.c:284
 run_ksoftirqd+0x86/0x100 kernel/softirq.c:645
 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: dccp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dccp/ccids/ccid3.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -624,9 +624,8 @@ static void ccid3_hc_rx_send_feedback(st
 	case CCID3_FBACK_PERIODIC:
 		delta = ktime_us_delta(now, hc->rx_tstamp_last_feedback);
 		if (delta <= 0)
-			DCCP_BUG("delta (%ld) <= 0", (long)delta);
-		else
-			hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
+			delta = 1;
+		hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 		break;
 	default:
 		return;

[PATCH 4.4 13/31] net: dccp: avoid crash in ccid3_hc_rx_send_feedback()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 74174fe5634ffbf645a7ca5a261571f700b2f332 ]

On fast hosts or malicious bots, we trigger a DCCP_BUG() which
seems excessive.

syzbot reported :

BUG: delta (-6195) <= 0 at net/dccp/ccids/ccid3.c:628/ccid3_hc_rx_send_feedback()
CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.18.0-rc1+ #112
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 ccid3_hc_rx_send_feedback net/dccp/ccids/ccid3.c:628 [inline]
 ccid3_hc_rx_packet_recv.cold.16+0x38/0x71 net/dccp/ccids/ccid3.c:793
 ccid_hc_rx_packet_recv net/dccp/ccid.h:185 [inline]
 dccp_deliver_input_to_ccids+0xf0/0x280 net/dccp/input.c:180
 dccp_rcv_established+0x87/0xb0 net/dccp/input.c:378
 dccp_v4_do_rcv+0x153/0x180 net/dccp/ipv4.c:654
 sk_backlog_rcv include/net/sock.h:914 [inline]
 __sk_receive_skb+0x3ba/0xd80 net/core/sock.c:517
 dccp_v4_rcv+0x10f9/0x1f58 net/dccp/ipv4.c:875
 ip_local_deliver_finish+0x2eb/0xda0 net/ipv4/ip_input.c:215
 NF_HOOK include/linux/netfilter.h:287 [inline]
 ip_local_deliver+0x1e9/0x750 net/ipv4/ip_input.c:256
 dst_input include/net/dst.h:450 [inline]
 ip_rcv_finish+0x823/0x2220 net/ipv4/ip_input.c:396
 NF_HOOK include/linux/netfilter.h:287 [inline]
 ip_rcv+0xa18/0x1284 net/ipv4/ip_input.c:492
 __netif_receive_skb_core+0x2488/0x3680 net/core/dev.c:4628
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693
 process_backlog+0x219/0x760 net/core/dev.c:5373
 napi_poll net/core/dev.c:5771 [inline]
 net_rx_action+0x7da/0x1980 net/core/dev.c:5837
 __do_softirq+0x2e8/0xb17 kernel/softirq.c:284
 run_ksoftirqd+0x86/0x100 kernel/softirq.c:645
 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: dccp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dccp/ccids/ccid3.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -624,9 +624,8 @@ static void ccid3_hc_rx_send_feedback(st
 	case CCID3_FBACK_PERIODIC:
 		delta = ktime_us_delta(now, hc->rx_tstamp_last_feedback);
 		if (delta <= 0)
-			DCCP_BUG("delta (%ld) <= 0", (long)delta);
-		else
-			hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
+			delta = 1;
+		hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 		break;
 	default:
 		return;

[PATCH 4.4 14/31] net: dccp: switch rx_tstamp_last_feedback to monotonic clock

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 0ce4e70ff00662ad7490e545ba0cd8c1fa179fca ]

To compute delays, better not use time of the day which can
be changed by admins or malicious programs.

Also change ccid3_first_li() to use s64 type for delta variable
to avoid potential overflows.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: dccp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dccp/ccids/ccid3.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -599,7 +599,7 @@ static void ccid3_hc_rx_send_feedback(st
 {
 	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	struct dccp_sock *dp = dccp_sk(sk);
-	ktime_t now = ktime_get_real();
+	ktime_t now = ktime_get();
 	s64 delta = 0;
 
 	switch (fbtype) {
@@ -631,7 +631,7 @@ static void ccid3_hc_rx_send_feedback(st
 		return;
 	}
 
-	ccid3_pr_debug("Interval %ldusec, X_recv=%u, 1/p=%u\n", (long)delta,
+	ccid3_pr_debug("Interval %lldusec, X_recv=%u, 1/p=%u\n", delta,
 		       hc->rx_x_recv, hc->rx_pinv);
 
 	hc->rx_tstamp_last_feedback = now;
@@ -678,7 +678,8 @@ static int ccid3_hc_rx_insert_options(st
 static u32 ccid3_first_li(struct sock *sk)
 {
 	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
-	u32 x_recv, p, delta;
+	u32 x_recv, p;
+	s64 delta;
 	u64 fval;
 
 	if (hc->rx_rtt = 0) {
@@ -686,7 +687,9 @@ static u32 ccid3_first_li(struct sock *s
 		hc->rx_rtt = DCCP_FALLBACK_RTT;
 	}
 
-	delta  = ktime_to_us(net_timedelta(hc->rx_tstamp_last_feedback));
+	delta = ktime_us_delta(ktime_get(), hc->rx_tstamp_last_feedback);
+	if (delta <= 0)
+		delta = 1;
 	x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 	if (x_recv = 0) {		/* would also trigger divide-by-zero */
 		DCCP_WARN("X_recv=0\n");

[PATCH 4.4 14/31] net: dccp: switch rx_tstamp_last_feedback to monotonic clock

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 0ce4e70ff00662ad7490e545ba0cd8c1fa179fca ]

To compute delays, better not use time of the day which can
be changed by admins or malicious programs.

Also change ccid3_first_li() to use s64 type for delta variable
to avoid potential overflows.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: dccp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dccp/ccids/ccid3.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -599,7 +599,7 @@ static void ccid3_hc_rx_send_feedback(st
 {
 	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	struct dccp_sock *dp = dccp_sk(sk);
-	ktime_t now = ktime_get_real();
+	ktime_t now = ktime_get();
 	s64 delta = 0;
 
 	switch (fbtype) {
@@ -631,7 +631,7 @@ static void ccid3_hc_rx_send_feedback(st
 		return;
 	}
 
-	ccid3_pr_debug("Interval %ldusec, X_recv=%u, 1/p=%u\n", (long)delta,
+	ccid3_pr_debug("Interval %lldusec, X_recv=%u, 1/p=%u\n", delta,
 		       hc->rx_x_recv, hc->rx_pinv);
 
 	hc->rx_tstamp_last_feedback = now;
@@ -678,7 +678,8 @@ static int ccid3_hc_rx_insert_options(st
 static u32 ccid3_first_li(struct sock *sk)
 {
 	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
-	u32 x_recv, p, delta;
+	u32 x_recv, p;
+	s64 delta;
 	u64 fval;
 
 	if (hc->rx_rtt == 0) {
@@ -686,7 +687,9 @@ static u32 ccid3_first_li(struct sock *s
 		hc->rx_rtt = DCCP_FALLBACK_RTT;
 	}
 
-	delta  = ktime_to_us(net_timedelta(hc->rx_tstamp_last_feedback));
+	delta = ktime_us_delta(ktime_get(), hc->rx_tstamp_last_feedback);
+	if (delta <= 0)
+		delta = 1;
 	x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 	if (x_recv == 0) {		/* would also trigger divide-by-zero */
 		DCCP_WARN("X_recv==0\n");

[4.4,18/31] r8152: napi hangup fix after disconnect

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ]

When unplugging an r8152 adapter while the interface is UP, the NIC
becomes unusable.  usb->disconnect (aka rtl8152_disconnect) deletes
napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes
netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to
napi_disable, but the napi is already deleted by disconnect above. So
the first while loop in napi_disable never finishes. This results in
complete deadlock of the network layer as there is rtnl_mutex held by
unregister_netdev.

So avoid the call to napi_disable in rtl8152_close when the device is
already gone.

The other calls to usb_kill_urb, cancel_delayed_work_sync,
netif_stop_queue etc. seem to be fine. The urb and netdev is not
destroyed yet.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/r8152.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)



--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3139,7 +3139,8 @@ static int rtl8152_close(struct net_devi
 #ifdef CONFIG_PM_SLEEP
 	unregister_pm_notifier(&tp->pm_notifier);
 #endif
-	napi_disable(&tp->napi);
+	if (!test_bit(RTL8152_UNPLUG, &tp->flags))
+		napi_disable(&tp->napi);
 	clear_bit(WORK_ENABLE, &tp->flags);
 	usb_kill_urb(tp->intr_urb);
 	cancel_delayed_work_sync(&tp->schedule);

[PATCH 4.4 18/31] r8152: napi hangup fix after disconnect

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ]

When unplugging an r8152 adapter while the interface is UP, the NIC
becomes unusable.  usb->disconnect (aka rtl8152_disconnect) deletes
napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes
netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to
napi_disable, but the napi is already deleted by disconnect above. So
the first while loop in napi_disable never finishes. This results in
complete deadlock of the network layer as there is rtnl_mutex held by
unregister_netdev.

So avoid the call to napi_disable in rtl8152_close when the device is
already gone.

The other calls to usb_kill_urb, cancel_delayed_work_sync,
netif_stop_queue etc. seem to be fine. The urb and netdev is not
destroyed yet.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/r8152.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3139,7 +3139,8 @@ static int rtl8152_close(struct net_devi
 #ifdef CONFIG_PM_SLEEP
 	unregister_pm_notifier(&tp->pm_notifier);
 #endif
-	napi_disable(&tp->napi);
+	if (!test_bit(RTL8152_UNPLUG, &tp->flags))
+		napi_disable(&tp->napi);
 	clear_bit(WORK_ENABLE, &tp->flags);
 	usb_kill_urb(tp->intr_urb);
 	cancel_delayed_work_sync(&tp->schedule);

[4.4,18/31] r8152: napi hangup fix after disconnect

[Ben Hutchings]

On Fri, 2018-07-20 at 14:13 +0200, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Jiri Slaby <jslaby@suse.cz>
> 
> [ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ]
[...]
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -3139,7 +3139,8 @@ static int rtl8152_close(struct net_devi
>  #ifdef CONFIG_PM_SLEEP
>  	unregister_pm_notifier(&tp->pm_notifier);
>  #endif
> -	napi_disable(&tp->napi);
> +	if (!test_bit(RTL8152_UNPLUG, &tp->flags))
> +		napi_disable(&tp->napi);
>  	clear_bit(WORK_ENABLE, &tp->flags);
>  	usb_kill_urb(tp->intr_urb);
>  	cancel_delayed_work_sync(&tp->schedule);

This flag appears to be set only if the USB device is actually
disconnected.  In case the driver is unbound for some other reason
(like the module is removed), the same problem will occur.

What I think might work is to do:

	if (!list_empty(&tp->napi.dev_list)
		napi_disable(&tp->napi);

Ben.

Re: [PATCH 4.4 18/31] r8152: napi hangup fix after disconnect

[Ben Hutchings]

On Fri, 2018-07-20 at 14:13 +0200, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Jiri Slaby <jslaby@suse.cz>
> 
> [ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ]
[...]
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -3139,7 +3139,8 @@ static int rtl8152_close(struct net_devi
>  #ifdef CONFIG_PM_SLEEP
>  	unregister_pm_notifier(&tp->pm_notifier);
>  #endif
> -	napi_disable(&tp->napi);
> +	if (!test_bit(RTL8152_UNPLUG, &tp->flags))
> +		napi_disable(&tp->napi);
>  	clear_bit(WORK_ENABLE, &tp->flags);
>  	usb_kill_urb(tp->intr_urb);
>  	cancel_delayed_work_sync(&tp->schedule);

This flag appears to be set only if the USB device is actually
disconnected.  In case the driver is unbound for some other reason
(like the module is removed), the same problem will occur.

What I think might work is to do:

	if (!list_empty(&tp->napi.dev_list)
		napi_disable(&tp->napi);

Ben.

-- 
Ben Hutchings, Software Developer                         Codethink Ltd
https://www.codethink.co.uk/                 Dale House, 35 Dale Street
                                     Manchester, M1 2HF, United Kingdom

[4.4,18/31] r8152: napi hangup fix after disconnect

[Jiri Slaby]

On 08/24/2018, 06:38 PM, Ben Hutchings wrote:
> On Fri, 2018-07-20 at 14:13 +0200, Greg Kroah-Hartman wrote:
>> 4.4-stable review patch.  If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: Jiri Slaby <jslaby@suse.cz>
>>
>> [ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ]
> [...]
>> --- a/drivers/net/usb/r8152.c
>> +++ b/drivers/net/usb/r8152.c
>> @@ -3139,7 +3139,8 @@ static int rtl8152_close(struct net_devi
>>  #ifdef CONFIG_PM_SLEEP
>>  	unregister_pm_notifier(&tp->pm_notifier);
>>  #endif
>> -	napi_disable(&tp->napi);
>> +	if (!test_bit(RTL8152_UNPLUG, &tp->flags))
>> +		napi_disable(&tp->napi);
>>  	clear_bit(WORK_ENABLE, &tp->flags);
>>  	usb_kill_urb(tp->intr_urb);
>>  	cancel_delayed_work_sync(&tp->schedule);
> 
> This flag appears to be set only if the USB device is actually
> disconnected.  In case the driver is unbound for some other reason
> (like the module is removed), the same problem will occur.

Could you elaborate? I thought this would happen:
module_exit -> usb_deregister -> usb_unbind_device -> rtl8152_disconnect
-> unregister_netdev -> rtl8152_close

Am I missing something?

thanks,

Re: [PATCH 4.4 18/31] r8152: napi hangup fix after disconnect

[Jiri Slaby]

On 08/24/2018, 06:38 PM, Ben Hutchings wrote:
> On Fri, 2018-07-20 at 14:13 +0200, Greg Kroah-Hartman wrote:
>> 4.4-stable review patch.  If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: Jiri Slaby <jslaby@suse.cz>
>>
>> [ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ]
> [...]
>> --- a/drivers/net/usb/r8152.c
>> +++ b/drivers/net/usb/r8152.c
>> @@ -3139,7 +3139,8 @@ static int rtl8152_close(struct net_devi
>>  #ifdef CONFIG_PM_SLEEP
>>  	unregister_pm_notifier(&tp->pm_notifier);
>>  #endif
>> -	napi_disable(&tp->napi);
>> +	if (!test_bit(RTL8152_UNPLUG, &tp->flags))
>> +		napi_disable(&tp->napi);
>>  	clear_bit(WORK_ENABLE, &tp->flags);
>>  	usb_kill_urb(tp->intr_urb);
>>  	cancel_delayed_work_sync(&tp->schedule);
> 
> This flag appears to be set only if the USB device is actually
> disconnected.  In case the driver is unbound for some other reason
> (like the module is removed), the same problem will occur.

Could you elaborate? I thought this would happen:
module_exit -> usb_deregister -> usb_unbind_device -> rtl8152_disconnect
-> unregister_netdev -> rtl8152_close

Am I missing something?

thanks,
-- 
js
suse labs

[4.4,18/31] r8152: napi hangup fix after disconnect

[Ben Hutchings]

On Sat, 2018-08-25 at 09:43 +0200, Jiri Slaby wrote:
> On 08/24/2018, 06:38 PM, Ben Hutchings wrote:
> > On Fri, 2018-07-20 at 14:13 +0200, Greg Kroah-Hartman wrote:
> > > 4.4-stable review patch.  If anyone has any objections, please let me know.
> > > 
> > > ------------------
> > > 
> > > From: Jiri Slaby <jslaby@suse.cz>
> > > 
> > > [ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ]
> > 
> > [...]
> > > --- a/drivers/net/usb/r8152.c
> > > +++ b/drivers/net/usb/r8152.c
> > > @@ -3139,7 +3139,8 @@ static int rtl8152_close(struct net_devi
> > >  #ifdef CONFIG_PM_SLEEP
> > >  	unregister_pm_notifier(&tp->pm_notifier);
> > >  #endif
> > > -	napi_disable(&tp->napi);
> > > +	if (!test_bit(RTL8152_UNPLUG, &tp->flags))
> > > +		napi_disable(&tp->napi);
> > >  	clear_bit(WORK_ENABLE, &tp->flags);
> > >  	usb_kill_urb(tp->intr_urb);
> > >  	cancel_delayed_work_sync(&tp->schedule);
> > 
> > This flag appears to be set only if the USB device is actually
> > disconnected.  In case the driver is unbound for some other reason
> > (like the module is removed), the same problem will occur.
> 
> Could you elaborate? I thought this would happen:
> module_exit -> usb_deregister -> usb_unbind_device -> rtl8152_disconnect
> -> unregister_netdev -> rtl8152_close
> 
> Am I missing something?

What I mean is that if the USB device has not been *physically*
disconnected then its usb_device::state will not be
USB_STATE_NOTATTACHED.  So rtl8152_disconnect() will not set the
RTL8152_UNPLUG flag and rtl8152_close() will still call napi_disable()
which will hang.

Some options to fix this:
- Add a separate flag which rtl8152_close() checks and
rtl8152_disconnect() always sets
- Call dev_close() before netif_napi_del()

Ben.

Re: [PATCH 4.4 18/31] r8152: napi hangup fix after disconnect

[Ben Hutchings]

On Sat, 2018-08-25 at 09:43 +0200, Jiri Slaby wrote:
> On 08/24/2018, 06:38 PM, Ben Hutchings wrote:
> > On Fri, 2018-07-20 at 14:13 +0200, Greg Kroah-Hartman wrote:
> > > 4.4-stable review patch.  If anyone has any objections, please let me know.
> > > 
> > > ------------------
> > > 
> > > From: Jiri Slaby <jslaby@suse.cz>
> > > 
> > > [ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ]
> > 
> > [...]
> > > --- a/drivers/net/usb/r8152.c
> > > +++ b/drivers/net/usb/r8152.c
> > > @@ -3139,7 +3139,8 @@ static int rtl8152_close(struct net_devi
> > >  #ifdef CONFIG_PM_SLEEP
> > >  	unregister_pm_notifier(&tp->pm_notifier);
> > >  #endif
> > > -	napi_disable(&tp->napi);
> > > +	if (!test_bit(RTL8152_UNPLUG, &tp->flags))
> > > +		napi_disable(&tp->napi);
> > >  	clear_bit(WORK_ENABLE, &tp->flags);
> > >  	usb_kill_urb(tp->intr_urb);
> > >  	cancel_delayed_work_sync(&tp->schedule);
> > 
> > This flag appears to be set only if the USB device is actually
> > disconnected.  In case the driver is unbound for some other reason
> > (like the module is removed), the same problem will occur.
> 
> Could you elaborate? I thought this would happen:
> module_exit -> usb_deregister -> usb_unbind_device -> rtl8152_disconnect
> -> unregister_netdev -> rtl8152_close
> 
> Am I missing something?

What I mean is that if the USB device has not been *physically*
disconnected then its usb_device::state will not be
USB_STATE_NOTATTACHED.  So rtl8152_disconnect() will not set the
RTL8152_UNPLUG flag and rtl8152_close() will still call napi_disable()
which will hang.

Some options to fix this:
- Add a separate flag which rtl8152_close() checks and
rtl8152_disconnect() always sets
- Call dev_close() before netif_napi_del()

Ben.

-- 
Ben Hutchings, Software Developer                         Codethink Ltd
https://www.codethink.co.uk/                 Dale House, 35 Dale Street
                                     Manchester, M1 2HF, United Kingdom