From: roy.pledge@nxp.com (Roy Pledge)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/4] staging/fsl-mc/bus: Move DPIO from staging to drivers/soc/fsl
Date: Mon, 23 Jul 2018 12:00:21 -0500 [thread overview]
Message-ID: <20180723170025.2259-1-roy.pledge@nxp.com> (raw)
Move the NXP DPIO (Datapath I/O driver) from the staging/fsl-mc/bus/dpio
directory to the drivers/soc/fsl directory.
The DPIO driver enables access to the Queue and Buffer Managemer (QBMAN)
hardware of NXP DPAA2 devices. This is a prerequiste for moving the DPAA2
Ethernet device driver from the staging directory.
Horia Geant? (1):
staging: fsl-dpaa2/eth: move generic FD defines to DPIO
Roy Pledge (3):
staging:fsl-mc: Move DPIO from staging to drivers/soc/fsl
drivers/staging: Remove fsl-mc driver from staging
drivers/soc/fsl/dpio: Convert DPIO documentation to .rst
.../networking/dpaa2/dpio-driver.rst | 30 +++++++++++++++++++---
Documentation/networking/dpaa2/index.rst | 1 +
MAINTAINERS | 2 +-
drivers/crypto/caam/sg_sw_qm2.h | 2 +-
drivers/crypto/caam/sg_sw_sec4.h | 2 +-
drivers/soc/fsl/Kconfig | 10 ++++++++
drivers/soc/fsl/Makefile | 1 +
.../{staging/fsl-mc/bus => soc/fsl}/dpio/Makefile | 0
.../fsl-mc/bus => soc/fsl}/dpio/dpio-cmd.h | 0
.../fsl-mc/bus => soc/fsl}/dpio/dpio-driver.c | 2 +-
.../fsl-mc/bus => soc/fsl}/dpio/dpio-service.c | 2 +-
.../{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.c | 0
.../{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.h | 0
.../fsl-mc/bus => soc/fsl}/dpio/qbman-portal.c | 2 +-
.../fsl-mc/bus => soc/fsl}/dpio/qbman-portal.h | 2 +-
drivers/staging/Kconfig | 2 --
drivers/staging/Makefile | 1 -
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 4 +--
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 22 +++++-----------
drivers/staging/fsl-mc/Kconfig | 2 --
drivers/staging/fsl-mc/Makefile | 3 ---
drivers/staging/fsl-mc/bus/Kconfig | 16 ------------
drivers/staging/fsl-mc/bus/Makefile | 9 -------
.../fsl-mc/include => include/soc/fsl}/dpaa2-fd.h | 12 +++++++++
.../include => include/soc/fsl}/dpaa2-global.h | 0
.../fsl-mc/include => include/soc/fsl}/dpaa2-io.h | 0
26 files changed, 67 insertions(+), 60 deletions(-)
rename drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt => Documentation/networking/dpaa2/dpio-driver.rst (94%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/Makefile (100%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-cmd.h (100%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-driver.c (99%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-service.c (99%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.c (100%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.h (100%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/qbman-portal.c (99%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/qbman-portal.h (99%)
delete mode 100644 drivers/staging/fsl-mc/Kconfig
delete mode 100644 drivers/staging/fsl-mc/Makefile
delete mode 100644 drivers/staging/fsl-mc/bus/Kconfig
delete mode 100644 drivers/staging/fsl-mc/bus/Makefile
rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-fd.h (97%)
rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-global.h (100%)
rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-io.h (100%)
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Roy Pledge <roy.pledge@nxp.com>
To: devel@driverdev.osuosl.org, linux-arm-kernel@lists.infradead.org,
gregkh@linuxfoundation.org, leoyang.li@nxp.com
Cc: laurentiu.tudor@nxp.com, ruxandra.radulescu@nxp.com,
horia.geanta@nxp.com, linux-kernel@vger.kernel.org,
arnd@arndb.de, catalin.marinas@arm.com, robin.murphy@arm.com,
Roy Pledge <roy.pledge@nxp.com>
Subject: [PATCH v2 0/4] staging/fsl-mc/bus: Move DPIO from staging to drivers/soc/fsl
Date: Mon, 23 Jul 2018 12:00:21 -0500 [thread overview]
Message-ID: <20180723170025.2259-1-roy.pledge@nxp.com> (raw)
Move the NXP DPIO (Datapath I/O driver) from the staging/fsl-mc/bus/dpio
directory to the drivers/soc/fsl directory.
The DPIO driver enables access to the Queue and Buffer Managemer (QBMAN)
hardware of NXP DPAA2 devices. This is a prerequiste for moving the DPAA2
Ethernet device driver from the staging directory.
Horia Geantă (1):
staging: fsl-dpaa2/eth: move generic FD defines to DPIO
Roy Pledge (3):
staging:fsl-mc: Move DPIO from staging to drivers/soc/fsl
drivers/staging: Remove fsl-mc driver from staging
drivers/soc/fsl/dpio: Convert DPIO documentation to .rst
.../networking/dpaa2/dpio-driver.rst | 30 +++++++++++++++++++---
Documentation/networking/dpaa2/index.rst | 1 +
MAINTAINERS | 2 +-
drivers/crypto/caam/sg_sw_qm2.h | 2 +-
drivers/crypto/caam/sg_sw_sec4.h | 2 +-
drivers/soc/fsl/Kconfig | 10 ++++++++
drivers/soc/fsl/Makefile | 1 +
.../{staging/fsl-mc/bus => soc/fsl}/dpio/Makefile | 0
.../fsl-mc/bus => soc/fsl}/dpio/dpio-cmd.h | 0
.../fsl-mc/bus => soc/fsl}/dpio/dpio-driver.c | 2 +-
.../fsl-mc/bus => soc/fsl}/dpio/dpio-service.c | 2 +-
.../{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.c | 0
.../{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.h | 0
.../fsl-mc/bus => soc/fsl}/dpio/qbman-portal.c | 2 +-
.../fsl-mc/bus => soc/fsl}/dpio/qbman-portal.h | 2 +-
drivers/staging/Kconfig | 2 --
drivers/staging/Makefile | 1 -
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 4 +--
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 22 +++++-----------
drivers/staging/fsl-mc/Kconfig | 2 --
drivers/staging/fsl-mc/Makefile | 3 ---
drivers/staging/fsl-mc/bus/Kconfig | 16 ------------
drivers/staging/fsl-mc/bus/Makefile | 9 -------
.../fsl-mc/include => include/soc/fsl}/dpaa2-fd.h | 12 +++++++++
.../include => include/soc/fsl}/dpaa2-global.h | 0
.../fsl-mc/include => include/soc/fsl}/dpaa2-io.h | 0
26 files changed, 67 insertions(+), 60 deletions(-)
rename drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt => Documentation/networking/dpaa2/dpio-driver.rst (94%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/Makefile (100%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-cmd.h (100%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-driver.c (99%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-service.c (99%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.c (100%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.h (100%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/qbman-portal.c (99%)
rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/qbman-portal.h (99%)
delete mode 100644 drivers/staging/fsl-mc/Kconfig
delete mode 100644 drivers/staging/fsl-mc/Makefile
delete mode 100644 drivers/staging/fsl-mc/bus/Kconfig
delete mode 100644 drivers/staging/fsl-mc/bus/Makefile
rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-fd.h (97%)
rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-global.h (100%)
rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-io.h (100%)
--
2.7.4
next reply other threads:[~2018-07-23 17:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-23 17:00 Roy Pledge [this message]
2018-07-23 17:00 ` [PATCH v2 0/4] staging/fsl-mc/bus: Move DPIO from staging to drivers/soc/fsl Roy Pledge
2018-07-23 17:00 ` [PATCH v2 1/4] staging: fsl-dpaa2/eth: move generic FD defines to DPIO Roy Pledge
2018-07-23 17:00 ` Roy Pledge
2018-07-23 17:00 ` [PATCH v2 2/4] staging:fsl-mc: Move DPIO from staging to drivers/soc/fsl Roy Pledge
2018-07-23 17:00 ` Roy Pledge
2018-07-23 17:00 ` [PATCH v2 3/4] drivers/staging: Remove fsl-mc driver from staging Roy Pledge
2018-07-23 17:00 ` Roy Pledge
2018-07-23 17:00 ` [PATCH v2 4/4] drivers/soc/fsl/dpio: Convert DPIO documentation to .rst Roy Pledge
2018-07-23 17:00 ` Roy Pledge
2018-07-24 13:52 ` Horia Geanta
2018-07-24 13:52 ` Horia Geanta
2018-07-24 14:26 ` Roy Pledge
2018-07-24 14:26 ` Roy Pledge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180723170025.2259-1-roy.pledge@nxp.com \
--to=roy.pledge@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.