From: maxime.ripard@bootlin.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] arm64: dts: allwinner: h5: Add SID for H5
Date: Tue, 24 Jul 2018 11:02:47 +0200 [thread overview]
Message-ID: <20180724090247.uhvtnukrr5cevv2j@flea> (raw)
In-Reply-To: <20180723104255.94244-4-manu@freebsd.org>
On Mon, Jul 23, 2018 at 12:42:55PM +0200, Emmanuel Vadot wrote:
> The SID controller on H5 look the same as the one present in the A64.
> But in case we find some difference one day at a compatible string
> of it's own and a fallback to the A64 one.
>
> Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
> ---
> .../devicetree/bindings/nvmem/allwinner,sunxi-sid.txt | 1 +
> arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 5 +++++
> 2 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
> index e319fe5e205a..99c4ba6a3f61 100644
> --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
> +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
> @@ -7,6 +7,7 @@ Required properties:
> "allwinner,sun8i-a83t-sid"
> "allwinner,sun8i-h3-sid"
> "allwinner,sun50i-a64-sid"
> + "allwinner,sun50i-h5-sid"
>
> - reg: Should contain registers location and length
Bindings patches should be separate.
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> index 62d646baac3c..28183bf77164 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> @@ -129,3 +129,8 @@
> <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> compatible = "allwinner,sun50i-h5-pinctrl";
> };
> +
> +&sid {
> + compatible = "allwinner,sun50i-h5-sid",
> + "allwinner,sun50i-a64-sid";
> +};
I'm not sure doing a split similar to what you're doing here just to
save the reg line is worth it.
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180724/368c7667/attachment.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Emmanuel Vadot <manu@freebsd.org>
Cc: wens@csie.org, robh+dt@kernel.org, mark.rutland@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
srinivas.kandagatla@linaro.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] arm64: dts: allwinner: h5: Add SID for H5
Date: Tue, 24 Jul 2018 11:02:47 +0200 [thread overview]
Message-ID: <20180724090247.uhvtnukrr5cevv2j@flea> (raw)
In-Reply-To: <20180723104255.94244-4-manu@freebsd.org>
[-- Attachment #1: Type: text/plain, Size: 1832 bytes --]
On Mon, Jul 23, 2018 at 12:42:55PM +0200, Emmanuel Vadot wrote:
> The SID controller on H5 look the same as the one present in the A64.
> But in case we find some difference one day at a compatible string
> of it's own and a fallback to the A64 one.
>
> Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
> ---
> .../devicetree/bindings/nvmem/allwinner,sunxi-sid.txt | 1 +
> arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 5 +++++
> 2 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
> index e319fe5e205a..99c4ba6a3f61 100644
> --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
> +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
> @@ -7,6 +7,7 @@ Required properties:
> "allwinner,sun8i-a83t-sid"
> "allwinner,sun8i-h3-sid"
> "allwinner,sun50i-a64-sid"
> + "allwinner,sun50i-h5-sid"
>
> - reg: Should contain registers location and length
Bindings patches should be separate.
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> index 62d646baac3c..28183bf77164 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> @@ -129,3 +129,8 @@
> <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> compatible = "allwinner,sun50i-h5-pinctrl";
> };
> +
> +&sid {
> + compatible = "allwinner,sun50i-h5-sid",
> + "allwinner,sun50i-a64-sid";
> +};
I'm not sure doing a split similar to what you're doing here just to
save the reg line is worth it.
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2018-07-24 9:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-23 10:42 [PATCH 1/4] arm64: dts: allwinner: a64: Add SID node Emmanuel Vadot
2018-07-23 10:42 ` Emmanuel Vadot
2018-07-23 10:42 ` [PATCH 2/4] ARM: dts: sunxi: h3/h5: " Emmanuel Vadot
2018-07-23 10:42 ` Emmanuel Vadot
2018-07-23 10:42 ` [PATCH 3/4] ARM: dts: sun8i: h3: Add SID compatible string Emmanuel Vadot
2018-07-23 10:42 ` Emmanuel Vadot
2018-07-23 10:42 ` [PATCH 4/4] arm64: dts: allwinner: h5: Add SID for H5 Emmanuel Vadot
2018-07-23 10:42 ` Emmanuel Vadot
2018-07-24 9:02 ` Maxime Ripard [this message]
2018-07-24 9:02 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180724090247.uhvtnukrr5cevv2j@flea \
--to=maxime.ripard@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.