From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 3/4] ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller
Date: Tue, 31 Jul 2018 11:22:57 +0200 [thread overview]
Message-ID: <20180731092258.2279-4-embed3d@gmail.com> (raw)
In-Reply-To: <20180731092258.2279-1-embed3d@gmail.com>
The Bananapi M3 has an onboard IR receiver.
This enables the onboard IR receiver subnode.
Unlike the other IR receivers this one needs a base clock frequency
of 3000000 Hz (3 MHz), to be able to work.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 3b579d7567c8..ea23ff821166 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -183,6 +183,11 @@
status = "okay";
};
+&r_cir {
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
sean-hENCXIMQXOg@public.gmane.org,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
andi.shyti-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org
Cc: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v6 3/4] ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller
Date: Tue, 31 Jul 2018 11:22:57 +0200 [thread overview]
Message-ID: <20180731092258.2279-4-embed3d@gmail.com> (raw)
In-Reply-To: <20180731092258.2279-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The Bananapi M3 has an onboard IR receiver.
This enables the onboard IR receiver subnode.
Unlike the other IR receivers this one needs a base clock frequency
of 3000000 Hz (3 MHz), to be able to work.
Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 3b579d7567c8..ea23ff821166 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -183,6 +183,11 @@
status = "okay";
};
+&r_cir {
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d@gmail.com>
To: mchehab@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, wens@csie.org,
linux@armlinux.org.uk, sean@mess.org, p.zabel@pengutronix.de,
andi.shyti@samsung.com
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v6 3/4] ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller
Date: Tue, 31 Jul 2018 11:22:57 +0200 [thread overview]
Message-ID: <20180731092258.2279-4-embed3d@gmail.com> (raw)
In-Reply-To: <20180731092258.2279-1-embed3d@gmail.com>
The Bananapi M3 has an onboard IR receiver.
This enables the onboard IR receiver subnode.
Unlike the other IR receivers this one needs a base clock frequency
of 3000000 Hz (3 MHz), to be able to work.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 3b579d7567c8..ea23ff821166 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -183,6 +183,11 @@
status = "okay";
};
+&r_cir {
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
--
2.11.0
next prev parent reply other threads:[~2018-07-31 9:22 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-31 9:22 [PATCH v6 0/4] IR support for A83T Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 9:22 ` [PATCH v6 1/4] ARM: dts: sun8i: a83t: Add the cir pin for the A83T Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 9:22 ` [PATCH v6 2/4] ARM: dts: sun8i: a83t: Add support for the cir interface Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 12:34 ` Maxime Ripard
2018-07-31 12:34 ` Maxime Ripard
2018-07-31 12:34 ` Maxime Ripard
2018-07-31 9:22 ` Philipp Rossak [this message]
2018-07-31 9:22 ` [PATCH v6 3/4] ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 9:22 ` [PATCH v6 4/4] ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 9:22 ` Philipp Rossak
2018-07-31 12:34 ` [PATCH v6 0/4] IR support for A83T Maxime Ripard
2018-07-31 12:34 ` Maxime Ripard
2018-07-31 12:34 ` Maxime Ripard
2018-08-01 6:55 ` Philipp Rossak
2018-08-01 6:55 ` Philipp Rossak
2018-08-01 6:55 ` Philipp Rossak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180731092258.2279-4-embed3d@gmail.com \
--to=embed3d@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.