Re: [RESEND PATCH 5/6] arm: enable RapidIO menu in Kconfig

[Russell King - ARM Linux <linux@armlinux.org.uk>]

On Tue, Jul 31, 2018 at 10:29:53AM -0400, Alexei Colin wrote:
> Platforms with a PCI bus will be offered the RapidIO menu since they may
> be want support for a RapidIO PCI device. Platforms without a PCI bus
> that might include a RapidIO IP block will need to "select HAS_RAPIDIO"
> in the platform-/machine-specific "config ARCH_*" Kconfig entry.
> 
> Tested that kernel builds for ARM with the RapidIO subsystem and switch
> drivers enabled.
> 
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: John Paul Walters <jwalters@isi.edu>
> Cc: linux-kernel@vger.kernel.org
> Cc: x86@kernel.org
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-mips@linux-mips.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Alexei Colin <acolin@isi.edu>
> ---
>  arch/arm/Kconfig | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index afe350e5e3d9..602a61324890 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1278,6 +1278,8 @@ config PCI_HOST_ITE8152
>  
>  source "drivers/pci/Kconfig"
>  
> +source "drivers/rapidio/Kconfig"
> +
>  source "drivers/pcmcia/Kconfig"

Why not place the new Kconfig file after pcmcia?  That way, it is in
a consistent position wrt architectures such as powerpc, and it is
also in alphabetical order.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
According to speedtest.net: 13Mbps down 490kbps up