From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 4/4] ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
Date: Wed, 1 Aug 2018 11:48:01 +0200 [thread overview]
Message-ID: <20180801094801.26627-5-embed3d@gmail.com> (raw)
In-Reply-To: <20180801094801.26627-1-embed3d@gmail.com>
The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index c3bff1105e5d..2f4d93de836e 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -818,7 +818,7 @@
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
sean-hENCXIMQXOg@public.gmane.org,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v7 4/4] ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
Date: Wed, 1 Aug 2018 11:48:01 +0200 [thread overview]
Message-ID: <20180801094801.26627-5-embed3d@gmail.com> (raw)
In-Reply-To: <20180801094801.26627-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index c3bff1105e5d..2f4d93de836e 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -818,7 +818,7 @@
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d@gmail.com>
To: mchehab@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, wens@csie.org,
linux@armlinux.org.uk, sean@mess.org, p.zabel@pengutronix.de
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v7 4/4] ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
Date: Wed, 1 Aug 2018 11:48:01 +0200 [thread overview]
Message-ID: <20180801094801.26627-5-embed3d@gmail.com> (raw)
In-Reply-To: <20180801094801.26627-1-embed3d@gmail.com>
The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index c3bff1105e5d..2f4d93de836e 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -818,7 +818,7 @@
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
--
2.11.0
next prev parent reply other threads:[~2018-08-01 9:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-01 9:47 [PATCH v7 0/4] IR support for A83T Philipp Rossak
2018-08-01 9:47 ` Philipp Rossak
2018-08-01 9:47 ` Philipp Rossak
2018-08-01 9:47 ` [PATCH v7 1/4] ARM: dts: sun8i: a83t: Add the cir pin for the A83T Philipp Rossak
2018-08-01 9:47 ` Philipp Rossak
2018-08-01 9:47 ` Philipp Rossak
2018-08-01 9:47 ` [PATCH v7 2/4] ARM: dts: sun8i: a83t: Add support for the cir interface Philipp Rossak
2018-08-01 9:47 ` Philipp Rossak
2018-08-01 9:47 ` Philipp Rossak
2018-08-01 9:48 ` [PATCH v7 3/4] ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller Philipp Rossak
2018-08-01 9:48 ` Philipp Rossak
2018-08-01 9:48 ` Philipp Rossak
2018-08-01 9:48 ` Philipp Rossak [this message]
2018-08-01 9:48 ` [PATCH v7 4/4] ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block Philipp Rossak
2018-08-01 9:48 ` Philipp Rossak
2018-08-07 6:25 ` [PATCH v7 0/4] IR support for A83T Chen-Yu Tsai
2018-08-07 6:25 ` Chen-Yu Tsai
2018-08-07 6:25 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180801094801.26627-5-embed3d@gmail.com \
--to=embed3d@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.