[RFC PATCH 0/4] vfs: map unique ino/dev pairs for user space

[RFC PATCH 0/4] vfs: map unique ino/dev pairs for user space

[Mark Fasheh]

Hi,

These patches are follow-up to this conversation on fsdevel which provides a
good break-down of the core problem:

https://www.spinics.net/lists/linux-fsdevel/msg128003.html

That e-mail was in turn a follow-up to the following patch series:

https://lwn.net/Articles/753917/

which tried to solve the dev portion of this problem with a bit of structure
re-routing but was never accepted.


We have an inconsistency in how the kernel is exporting inode number /
device pairs for user space.  I'm not talking about stat(2) or statx(2) here
but everywhere else where an ino/dev is exported into a buffer for user
space.

We typically do this by simply dumping the potentially 32 bit inode->i_ino
and single device from super->s_dev.  Sometimes these values differ from
what is returned via stat(2) or statx(2).  Some filesystems might even show
duplicate (but internally different!) pairs when the raw i_ino/s_dev is
used.

Aside from breaking software which expects these pairs to be unique, this
can put the user in a situation where they might not be able to find an
inode referenced from some kernel log (be it /proc/, printk buffer, etc). 
What's even worse - depending on how ino is exported, they might even find
an existing but /wrong/ file.

The following patches fix these inconsistencies by introducing a VFS helper
function which calls the underlying filesystem ->getattr to get our real
inode number / device pair.  The returned values can then be used at those
places in the kernel where we are incorrectly reporting our ino/dev pair. 
We then update fs/proc/ and fs/locks.c to use this helper when writing to
/proc/PID/maps and /proc/locks respectively.


For anyone who is watching the evolution of these patches, this would be one
implementation of the 'callback' method which I discussed in my last e-mail. 
This approach is very straight forward and easy to understand but has some
drawbacks:

- Not all of the call sites can tolerate errors.  Instead, we fallback to
  inode->i_ino and super->s_dev in case of getattr error.  That behavior is
  no worse than what we have today but what we have today is pretty bad so I
  don't particularly feel good about that. It's better than nothing though.

- There are places in the kernel where we could never call into ->getattr. 
  There are tons of tracepoints for example that are printing the the wrong
  ino/dev pair.

- The helper function has to fake a path struct because getting a vfsmount
  from inside these call sites is impossible.  This isn't actually a big
  deal as nobody except NFS cares and the NFS patch is very trivial.  It's
  ugly though, so if we had consensus on this approach I would happily
  rework our ->getattr function signature, perhaps pulling the vfsmount and
  dentry arguments back out.

- The dentry argument to ->getattr is potentially problematic as we have
  some places which _only_ have an inode. Even if we had a dentry I'm not
  sure what would keep it from going negative while in the middle of our
  ->getattr call.


Comments and review would be greatly appreciated. Thanks,
	--Mark

[PATCH 1/4] vfs: introduce function to map unique ino/dev pairs

[Mark Fasheh]

There are places in the VFS where we export an ino/dev pair to userspace.
/proc/PID/maps is a good example - we directly expose inode->i_ino and
inode->i_sb->s_dev to userspace there.  Many filesystems don't put a unique
value in inode->i_ino and instead rely on ->getattr to provide the real
inode number to userspace.  super->s_dev is similar - some filesystems
expose a difference device from what's put in super->s_dev when queried via
stat/statx.

Ultimately this makes it impossible for a user (or software) to match one of
those reported pairs to the right inode.

We can fix this by adding a helper function, vfs_map_unique_ino_dev(), which
will query the owning filesystem (via ->getattr) to get the correct ino/dev
pair.  Later patches will update those places which simply dump inode->i_ino
and super->s_dev to use the helper.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
---
 fs/stat.c          | 23 +++++++++++++++++++++++
 include/linux/fs.h |  2 ++
 2 files changed, 25 insertions(+)

diff --git a/fs/stat.c b/fs/stat.c
index f8e6fb2c3657..80ea42505219 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -84,6 +84,29 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
 }
 EXPORT_SYMBOL(vfs_getattr_nosec);
 
+void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev)
+{
+	int ret;
+	struct path path;
+	struct kstat stat;
+
+	path.mnt = NULL;
+	path.dentry = dentry;
+	/* ->dev is always returned, so we only need to specify ino here */
+	ret = vfs_getattr_nosec(&path, &stat, STATX_INO, 0);
+	if (ret) {
+		struct inode *inode = d_inode(dentry);
+		/* Fallback to old behavior in case of getattr error */
+		*ino = inode->i_ino;
+		*dev = inode->i_sb->s_dev;
+		return ret;
+	}
+	*ino = stat.ino;
+	*dev = stat.dev;
+	return 0;
+}
+EXPORT_SYMBOL(vfs_map_unique_ino_dev);
+
 /*
  * vfs_getattr - Get the enhanced basic attributes of a file
  * @path: The file of interest
diff --git a/include/linux/fs.h b/include/linux/fs.h
index d78d146a98da..b80789472438 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3077,6 +3077,8 @@ extern void kfree_link(void *);
 extern void generic_fillattr(struct inode *, struct kstat *);
 extern int vfs_getattr_nosec(const struct path *, struct kstat *, u32, unsigned int);
 extern int vfs_getattr(const struct path *, struct kstat *, u32, unsigned int);
+extern void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev);
+
 void __inode_add_bytes(struct inode *inode, loff_t bytes);
 void inode_add_bytes(struct inode *inode, loff_t bytes);
 void __inode_sub_bytes(struct inode *inode, loff_t bytes);
-- 
2.15.1

Re: [PATCH 1/4] vfs: introduce function to map unique ino/dev pairs

[Mark Fasheh]

On Tue, Jul 31, 2018 at 02:10:42PM -0700, Mark Fasheh wrote:
> diff --git a/fs/stat.c b/fs/stat.c
> index f8e6fb2c3657..80ea42505219 100644
> --- a/fs/stat.c
> +++ b/fs/stat.c
> @@ -84,6 +84,29 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
>  }
>  EXPORT_SYMBOL(vfs_getattr_nosec);
>  
> +void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev)
> +{
> +	int ret;
> +	struct path path;
> +	struct kstat stat;
> +
> +	path.mnt = NULL;
> +	path.dentry = dentry;
> +	/* ->dev is always returned, so we only need to specify ino here */
> +	ret = vfs_getattr_nosec(&path, &stat, STATX_INO, 0);
> +	if (ret) {
> +		struct inode *inode = d_inode(dentry);
> +		/* Fallback to old behavior in case of getattr error */
> +		*ino = inode->i_ino;
> +		*dev = inode->i_sb->s_dev;
> +		return ret;

Ooof, attached is a version of this patch which doesn't try to return a value
from a void function. Apologies for the extra e-mail.

>From Mark Fasheh <mfasheh@suse.de>

[PATCH 1/4] vfs: introduce function to map unique ino/dev pairs

There are places in the VFS where we export an ino/dev pair to userspace.
/proc/PID/maps is a good example - we directly expose inode->i_ino and
inode->i_sb->s_dev to userspace there.  Many filesystems don't put a unique
value in inode->i_ino and instead rely on ->getattr to provide the real
inode number to userspace.  super->s_dev is similar - some filesystems
expose a difference device from what's put in super->s_dev when queried via
stat/statx.

Ultimately this makes it impossible for a user (or software) to match one of
those reported pairs to the right inode.

We can fix this by adding a helper function, vfs_map_unique_ino_dev(), which
will query the owning filesystem (via ->getattr) to get the correct ino/dev
pair.  Later patches will update those places which simply dump inode->i_ino
and super->s_dev to use the helper.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
---
 fs/stat.c          | 22 ++++++++++++++++++++++
 include/linux/fs.h |  2 ++
 2 files changed, 24 insertions(+)

diff --git a/fs/stat.c b/fs/stat.c
index f8e6fb2c3657..20c72d618ed5 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -84,6 +84,28 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
 }
 EXPORT_SYMBOL(vfs_getattr_nosec);
 
+void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev)
+{
+	int ret;
+	struct path path;
+	struct kstat stat;
+
+	path.mnt = NULL;
+	path.dentry = dentry;
+	/* ->dev is always returned, so we only need to specify ino here */
+	ret = vfs_getattr_nosec(&path, &stat, STATX_INO, 0);
+	if (ret) {
+		struct inode *inode = d_inode(dentry);
+		/* Fallback to old behavior in case of getattr error */
+		*ino = inode->i_ino;
+		*dev = inode->i_sb->s_dev;
+		return;
+	}
+	*ino = stat.ino;
+	*dev = stat.dev;
+}
+EXPORT_SYMBOL(vfs_map_unique_ino_dev);
+
 /*
  * vfs_getattr - Get the enhanced basic attributes of a file
  * @path: The file of interest
diff --git a/include/linux/fs.h b/include/linux/fs.h
index d78d146a98da..b80789472438 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3077,6 +3077,8 @@ extern void kfree_link(void *);
 extern void generic_fillattr(struct inode *, struct kstat *);
 extern int vfs_getattr_nosec(const struct path *, struct kstat *, u32, unsigned int);
 extern int vfs_getattr(const struct path *, struct kstat *, u32, unsigned int);
+extern void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev);
+
 void __inode_add_bytes(struct inode *inode, loff_t bytes);
 void inode_add_bytes(struct inode *inode, loff_t bytes);
 void __inode_sub_bytes(struct inode *inode, loff_t bytes);
-- 
2.15.1

Re: [PATCH 1/4] vfs: introduce function to map unique ino/dev pairs

[Mark Fasheh]

On Tue, Jul 31, 2018 at 02:10:42PM -0700, Mark Fasheh wrote:
> diff --git a/fs/stat.c b/fs/stat.c
> index f8e6fb2c3657..80ea42505219 100644
> --- a/fs/stat.c
> +++ b/fs/stat.c
> @@ -84,6 +84,29 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
>  }
>  EXPORT_SYMBOL(vfs_getattr_nosec);
>  
> +void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev)
> +{
> +	int ret;
> +	struct path path;
> +	struct kstat stat;
> +
> +	path.mnt = NULL;
> +	path.dentry = dentry;
> +	/* ->dev is always returned, so we only need to specify ino here */
> +	ret = vfs_getattr_nosec(&path, &stat, STATX_INO, 0);
> +	if (ret) {
> +		struct inode *inode = d_inode(dentry);
> +		/* Fallback to old behavior in case of getattr error */
> +		*ino = inode->i_ino;
> +		*dev = inode->i_sb->s_dev;
> +		return ret;

Ooof, attached is a version of this patch which doesn't try to return a value
from a void function. Apologies for the extra e-mail.

Re: [PATCH 1/4] vfs: introduce function to map unique ino/dev pairs

[Amir Goldstein]

On Wed, Aug 1, 2018 at 2:21 AM, Mark Fasheh <mfasheh@suse.de> wrote:
>
> On Tue, Jul 31, 2018 at 02:10:42PM -0700, Mark Fasheh wrote:
>> diff --git a/fs/stat.c b/fs/stat.c
>> index f8e6fb2c3657..80ea42505219 100644
>> --- a/fs/stat.c
>> +++ b/fs/stat.c
>> @@ -84,6 +84,29 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
>>  }
>>  EXPORT_SYMBOL(vfs_getattr_nosec);
>>
>> +void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev)
>> +{
>> +     int ret;
>> +     struct path path;
>> +     struct kstat stat;
>> +
>> +     path.mnt = NULL;
>> +     path.dentry = dentry;
>> +     /* ->dev is always returned, so we only need to specify ino here */
>> +     ret = vfs_getattr_nosec(&path, &stat, STATX_INO, 0);
>> +     if (ret) {
>> +             struct inode *inode = d_inode(dentry);
>> +             /* Fallback to old behavior in case of getattr error */
>> +             *ino = inode->i_ino;
>> +             *dev = inode->i_sb->s_dev;
>> +             return ret;
>
> Ooof, attached is a version of this patch which doesn't try to return a value
> from a void function. Apologies for the extra e-mail.
>
> From Mark Fasheh <mfasheh@suse.de>
>
> [PATCH 1/4] vfs: introduce function to map unique ino/dev pairs
>
> There are places in the VFS where we export an ino/dev pair to userspace.
> /proc/PID/maps is a good example - we directly expose inode->i_ino and
> inode->i_sb->s_dev to userspace there.  Many filesystems don't put a unique
> value in inode->i_ino and instead rely on ->getattr to provide the real
> inode number to userspace.  super->s_dev is similar - some filesystems
> expose a difference device from what's put in super->s_dev when queried via
> stat/statx.
>
> Ultimately this makes it impossible for a user (or software) to match one of
> those reported pairs to the right inode.
>
> We can fix this by adding a helper function, vfs_map_unique_ino_dev(), which
> will query the owning filesystem (via ->getattr) to get the correct ino/dev
> pair.  Later patches will update those places which simply dump inode->i_ino
> and super->s_dev to use the helper.
>
> Signed-off-by: Mark Fasheh <mfasheh@suse.de>
> ---
>  fs/stat.c          | 22 ++++++++++++++++++++++
>  include/linux/fs.h |  2 ++
>  2 files changed, 24 insertions(+)
>
> diff --git a/fs/stat.c b/fs/stat.c
> index f8e6fb2c3657..20c72d618ed5 100644
> --- a/fs/stat.c
> +++ b/fs/stat.c
> @@ -84,6 +84,28 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
>  }
>  EXPORT_SYMBOL(vfs_getattr_nosec);
>
> +void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev)

I find this function name a bit more than function can guaranty.
It's just a fancy wrapper around ->getattr()
How about vfs_get_ino_dev() ?

Thanks,
Amir.

Re: [PATCH 1/4] vfs: introduce function to map unique ino/dev pairs

[Mark Fasheh]

Hi Amir,

On Wed, Aug 01, 2018 at 08:41:14AM +0300, Amir Goldstein wrote:
> > +void vfs_map_unique_ino_dev(struct dentry *dentry, u64 *ino, dev_t *dev)
> 
> I find this function name a bit more than function can guaranty.
> It's just a fancy wrapper around ->getattr()
> How about vfs_get_ino_dev() ?

Yeah I agree with that. An early version actually had the name
vfs_get_ino_dev(), I don't mind going back to it.

Thanks for the review!
	--Mark

[PATCH 2/4] nfs: check for NULL vfsmount in nfs_getattr

[Mark Fasheh]

->getattr from inside the kernel won't always have a vfsmount, check for
this.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
---
 fs/nfs/inode.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index b65aee481d13..7a3d90a7cc92 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -795,7 +795,9 @@ int nfs_getattr(const struct path *path, struct kstat *stat,
 	}
 
 	/*
-	 * We may force a getattr if the user cares about atime.
+	 * We may force a getattr if the user cares about atime. A
+	 * NULL vfsmount means we are called from inside the kernel,
+	 * where no atime is required.
 	 *
 	 * Note that we only have to check the vfsmount flags here:
 	 *  - NFS always sets S_NOATIME by so checking it would give a
@@ -803,7 +805,7 @@ int nfs_getattr(const struct path *path, struct kstat *stat,
 	 *  - NFS never sets SB_NOATIME or SB_NODIRATIME so there is
 	 *    no point in checking those.
 	 */
-	if ((path->mnt->mnt_flags & MNT_NOATIME) ||
+	if (!path->mnt || (path->mnt->mnt_flags & MNT_NOATIME) ||
 	    ((path->mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)))
 		request_mask &= ~STATX_ATIME;
 
-- 
2.15.1

Re: [PATCH 2/4] nfs: check for NULL vfsmount in nfs_getattr

[Al Viro]

On Tue, Jul 31, 2018 at 02:10:43PM -0700, Mark Fasheh wrote:
> ->getattr from inside the kernel won't always have a vfsmount, check for
> this.

Really?  Where would that happen?

Re: [PATCH 2/4] nfs: check for NULL vfsmount in nfs_getattr

[Mark Fasheh]

Hi Al,

On Tue, Jul 31, 2018 at 11:16:05PM +0100, Al Viro wrote:
> On Tue, Jul 31, 2018 at 02:10:43PM -0700, Mark Fasheh wrote:
> > ->getattr from inside the kernel won't always have a vfsmount, check for
> > this.
> 
> Really?  Where would that happen?

It happens in my first patch. FWIW, I'm not tied to that particular bit of
code, or even this (latest) approach. I would actually very much appreciate
your input into how we might fix the problem we have where we are sometimes
not exporting a correct ino/dev pair to user space.

I have a good break-down of the problem and possible solutions here:

https://www.spinics.net/lists/linux-fsdevel/msg128003.html

Thanks,
	--Mark

Re: [PATCH 2/4] nfs: check for NULL vfsmount in nfs_getattr

[Al Viro]

On Tue, Jul 31, 2018 at 10:51:57PM +0000, Mark Fasheh wrote:
> Hi Al,
> 
> On Tue, Jul 31, 2018 at 11:16:05PM +0100, Al Viro wrote:
> > On Tue, Jul 31, 2018 at 02:10:43PM -0700, Mark Fasheh wrote:
> > > ->getattr from inside the kernel won't always have a vfsmount, check for
> > > this.
> > 
> > Really?  Where would that happen?
> 
> It happens in my first patch. FWIW, I'm not tied to that particular bit of
> code, or even this (latest) approach. I would actually very much appreciate
> your input into how we might fix the problem we have where we are sometimes
> not exporting a correct ino/dev pair to user space.

Which callers would those be?  I don't see anything in your series that
wouldn't have vfsmount at hand...

> I have a good break-down of the problem and possible solutions here:
> 
> https://www.spinics.net/lists/linux-fsdevel/msg128003.html

btrfs pulling odd crap with device numbers is a problem, but this is far from
the most obvious unpleasantness caused by that - e.g. userland code expecting
that unequal st_dev for directory and subdirectory means that we have
a mountpoint there.  Or assuming it can compare that to st_dev of mountpoints
(or, indeed, the values in /proc/self/mountinfo) to find which fs it's on...

/proc/*/maps is unfortunate, but it does contain the pathnames, doesn't it?
What _real_ problems are there - the ones where we don't have a saner solution?
Note that /proc/locks is (a) FPOS interface and (b) unsuitable for your
approach anyway.

Re: [PATCH 2/4] nfs: check for NULL vfsmount in nfs_getattr

[Mark Fasheh]

Hi Al,

On Thu, Aug 02, 2018 at 01:43:48AM +0100, Al Viro wrote:
> On Tue, Jul 31, 2018 at 10:51:57PM +0000, Mark Fasheh wrote:
> > Hi Al,
> > 
> > On Tue, Jul 31, 2018 at 11:16:05PM +0100, Al Viro wrote:
> > > On Tue, Jul 31, 2018 at 02:10:43PM -0700, Mark Fasheh wrote:
> > > > ->getattr from inside the kernel won't always have a vfsmount, check for
> > > > this.
> > > 
> > > Really?  Where would that happen?
> > 
> > It happens in my first patch. FWIW, I'm not tied to that particular bit of
> > code, or even this (latest) approach. I would actually very much appreciate
> > your input into how we might fix the problem we have where we are sometimes
> > not exporting a correct ino/dev pair to user space.
> 
> Which callers would those be?  I don't see anything in your series that
> wouldn't have vfsmount at hand...

You are correct - there's no callers in my patch series that don't have a
vfsmount available. I can remove patch #2 and pass the vfsmount through.

At some point I was trying to plug this callback into audit_copy_inode()
which AFAICT doesn't have a vfsmount to pass in when we're coming from
vfs_rename (vfs_rename() -> fsnotify_move()). I will eventually have to go
back and handle this for audit though so it seems worth mentioning here.


> > I have a good break-down of the problem and possible solutions here:
> > 
> > https://www.spinics.net/lists/linux-fsdevel/msg128003.html
> 
> btrfs pulling odd crap with device numbers is a problem, but this is far from
> the most obvious unpleasantness caused by that - e.g. userland code expecting
> that unequal st_dev for directory and subdirectory means that we have
> a mountpoint there.  Or assuming it can compare that to st_dev of mountpoints
> (or, indeed, the values in /proc/self/mountinfo) to find which fs it's on...

Indeed, I agree that all of these are pretty gross and things I'd like to
see fixed - I have to deal with subvolume boundaries in some of my own
software. I know Jeff is working on some code to give subvolumes their own
vfsmount but that wouldn't help with our device reporting unless we did
something like move s_dev from the super_block to the vfsmount (also an idea
that's been thrown around).


> /proc/*/maps is unfortunate, but it does contain the pathnames, doesn't it?
> What _real_ problems are there - the ones where we don't have a saner solution?
> Note that /proc/locks is (a) FPOS interface and (b) unsuitable for your
> approach anyway.

Yeah I see now that /proc/locks isn't going to work with something calling
into ->getattr().

Primarily my concerns are /proc/*/maps and audit (which is recording ino/dev
pairs). Even though /proc/*/maps prints a path it is still a problem as
there is no way for userspace to verify that the inode it stats using that
path is the correct one.

I don't mean to overstate the case but the /proc/*/maps issue is real to us
(SUSE) in that it's produced bug reports. For example, lsof produces
confusing output when we run with a btrfs subvolume as root.

As far as problems that can't be solved by this approach - there are
tracepoints in events/lock.h and events/writeback.h which ought to be
reporting the correct ino/dev pairs. There's of course /proc/locks too. I
acknowledge that whether those are severe enough to warrant a different
approach might be up for debate.

Thanks,
	--Mark

[PATCH 3/4] proc: use vfs helper to get ino/dev pairs for maps file

[Mark Fasheh]

Proc writes ino/dev into /proc/PID/maps which it gets from i_ino and s_dev.
The problem with this is that i_ino and s_dev are not guaranteed to be
unique - we can have duplicates in the maps file for otherwise distinct
inodes.

This breaks any software expecting them to be unique, including lsof(8).  We
can fix this by using vfs_map_unique_ino_dev() to map the unique ino/dev
pair for us.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
---
 fs/proc/nommu.c      | 11 ++++-------
 fs/proc/task_mmu.c   |  8 +++-----
 fs/proc/task_nommu.c |  8 +++-----
 3 files changed, 10 insertions(+), 17 deletions(-)

diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
index 3b63be64e436..56c12d02c5ad 100644
--- a/fs/proc/nommu.c
+++ b/fs/proc/nommu.c
@@ -36,7 +36,7 @@
  */
 static int nommu_region_show(struct seq_file *m, struct vm_region *region)
 {
-	unsigned long ino = 0;
+        u64 ino = 0;
 	struct file *file;
 	dev_t dev = 0;
 	int flags;
@@ -44,15 +44,12 @@ static int nommu_region_show(struct seq_file *m, struct vm_region *region)
 	flags = region->vm_flags;
 	file = region->vm_file;
 
-	if (file) {
-		struct inode *inode = file_inode(region->vm_file);
-		dev = inode->i_sb->s_dev;
-		ino = inode->i_ino;
-	}
+	if (file)
+		vfs_map_unique_ino_dev(file_dentry(file), &ino, &dev); {
 
 	seq_setwidth(m, 25 + sizeof(void *) * 6 - 1);
 	seq_printf(m,
-		   "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu ",
+		   "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %llu ",
 		   region->vm_start,
 		   region->vm_end,
 		   flags & VM_READ ? 'r' : '-',
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index dfd73a4616ce..e9cd33425191 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -276,7 +276,7 @@ static int is_stack(struct vm_area_struct *vma)
 static void show_vma_header_prefix(struct seq_file *m,
 				   unsigned long start, unsigned long end,
 				   vm_flags_t flags, unsigned long long pgoff,
-				   dev_t dev, unsigned long ino)
+				   dev_t dev, u64 ino)
 {
 	seq_setwidth(m, 25 + sizeof(void *) * 6 - 1);
 	seq_put_hex_ll(m, NULL, start, 8);
@@ -299,16 +299,14 @@ show_map_vma(struct seq_file *m, struct vm_area_struct *vma, int is_pid)
 	struct mm_struct *mm = vma->vm_mm;
 	struct file *file = vma->vm_file;
 	vm_flags_t flags = vma->vm_flags;
-	unsigned long ino = 0;
+	u64 ino = 0;
 	unsigned long long pgoff = 0;
 	unsigned long start, end;
 	dev_t dev = 0;
 	const char *name = NULL;
 
 	if (file) {
-		struct inode *inode = file_inode(vma->vm_file);
-		dev = inode->i_sb->s_dev;
-		ino = inode->i_ino;
+		vfs_map_unique_ino_dev(file_dentry(file), &ino, &dev);
 		pgoff = ((loff_t)vma->vm_pgoff) << PAGE_SHIFT;
 	}
 
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 5b62f57bd9bc..1198e979ed3f 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -146,7 +146,7 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma,
 			  int is_pid)
 {
 	struct mm_struct *mm = vma->vm_mm;
-	unsigned long ino = 0;
+	u64 ino = 0;
 	struct file *file;
 	dev_t dev = 0;
 	int flags;
@@ -156,15 +156,13 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma,
 	file = vma->vm_file;
 
 	if (file) {
-		struct inode *inode = file_inode(vma->vm_file);
-		dev = inode->i_sb->s_dev;
-		ino = inode->i_ino;
+		vfs_map_unique_inode_dev(file_dentry(file), &ino, &dev));
 		pgoff = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
 	}
 
 	seq_setwidth(m, 25 + sizeof(void *) * 6 - 1);
 	seq_printf(m,
-		   "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu ",
+		   "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %llu ",
 		   vma->vm_start,
 		   vma->vm_end,
 		   flags & VM_READ ? 'r' : '-',
-- 
2.15.1

[PATCH 4/4] locks: map correct ino/dev pairs when exporting to userspace

[Mark Fasheh]

/proc/locks does not always print the correct inode number/device pair.
Update lock_get_status() to use vfs_map_unique_ino_dev() to get the real,
unique values for userspace.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
---
 fs/locks.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/fs/locks.c b/fs/locks.c
index db7b6917d9c5..3a012df87fd8 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -2621,6 +2621,7 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
 			    loff_t id, char *pfx)
 {
 	struct inode *inode = NULL;
+	struct dentry *dentry;
 	unsigned int fl_pid;
 	struct pid_namespace *proc_pidns = file_inode(f->file)->i_sb->s_fs_info;
 
@@ -2633,8 +2634,10 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
 	if (fl_pid == 0)
 		return;
 
-	if (fl->fl_file != NULL)
+	if (fl->fl_file != NULL) {
 		inode = locks_inode(fl->fl_file);
+		dentry = file_dentry(fl->fl_file);
+	}
 
 	seq_printf(f, "%lld:%s ", id, pfx);
 	if (IS_POSIX(fl)) {
@@ -2681,10 +2684,13 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
 			       : (fl->fl_type == F_WRLCK) ? "WRITE" : "READ ");
 	}
 	if (inode) {
+		__u64 ino;
+		dev_t dev;
+
+		vfs_map_unique_ino_dev(dentry, &ino, &dev);
 		/* userspace relies on this representation of dev_t */
 		seq_printf(f, "%d %02x:%02x:%ld ", fl_pid,
-				MAJOR(inode->i_sb->s_dev),
-				MINOR(inode->i_sb->s_dev), inode->i_ino);
+				MAJOR(dev), MINOR(dev), inode->i_ino);
 	} else {
 		seq_printf(f, "%d <none>:0 ", fl_pid);
 	}
-- 
2.15.1

Re: [PATCH 4/4] locks: map correct ino/dev pairs when exporting to userspace

[Amir Goldstein]

On Wed, Aug 1, 2018 at 12:10 AM, Mark Fasheh <mfasheh@suse.de> wrote:
> /proc/locks does not always print the correct inode number/device pair.
> Update lock_get_status() to use vfs_map_unique_ino_dev() to get the real,
> unique values for userspace.
>
> Signed-off-by: Mark Fasheh <mfasheh@suse.de>
> ---
>  fs/locks.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/fs/locks.c b/fs/locks.c
> index db7b6917d9c5..3a012df87fd8 100644
> --- a/fs/locks.c
> +++ b/fs/locks.c
> @@ -2621,6 +2621,7 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
>                             loff_t id, char *pfx)
>  {
>         struct inode *inode = NULL;
> +       struct dentry *dentry;
>         unsigned int fl_pid;
>         struct pid_namespace *proc_pidns = file_inode(f->file)->i_sb->s_fs_info;
>
> @@ -2633,8 +2634,10 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
>         if (fl_pid == 0)
>                 return;
>
> -       if (fl->fl_file != NULL)
> +       if (fl->fl_file != NULL) {
>                 inode = locks_inode(fl->fl_file);
> +               dentry = file_dentry(fl->fl_file);
> +       }
>
>         seq_printf(f, "%lld:%s ", id, pfx);
>         if (IS_POSIX(fl)) {
> @@ -2681,10 +2684,13 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
>                                : (fl->fl_type == F_WRLCK) ? "WRITE" : "READ ");
>         }
>         if (inode) {
> +               __u64 ino;
> +               dev_t dev;
> +
> +               vfs_map_unique_ino_dev(dentry, &ino, &dev);
>                 /* userspace relies on this representation of dev_t */
>                 seq_printf(f, "%d %02x:%02x:%ld ", fl_pid,
> -                               MAJOR(inode->i_sb->s_dev),
> -                               MINOR(inode->i_sb->s_dev), inode->i_ino);
> +                               MAJOR(dev), MINOR(dev), inode->i_ino);

Don't you mean ,ino); ?

Thanks,
Amir.

Re: [PATCH 4/4] locks: map correct ino/dev pairs when exporting to userspace

[Mark Fasheh]

On Wed, Aug 01, 2018 at 08:37:31AM +0300, Amir Goldstein wrote:
> >         if (inode) {
> > +               __u64 ino;
> > +               dev_t dev;
> > +
> > +               vfs_map_unique_ino_dev(dentry, &ino, &dev);
> >                 /* userspace relies on this representation of dev_t */
> >                 seq_printf(f, "%d %02x:%02x:%ld ", fl_pid,
> > -                               MAJOR(inode->i_sb->s_dev),
> > -                               MINOR(inode->i_sb->s_dev), inode->i_ino);
> > +                               MAJOR(dev), MINOR(dev), inode->i_ino);
> 
> Don't you mean ,ino); ?

Indeed I do, thanks for catching that one Amir.
	--Mark

Re: [PATCH 4/4] locks: map correct ino/dev pairs when exporting to userspace

[Jeff Layton]

On Tue, 2018-07-31 at 14:10 -0700, Mark Fasheh wrote:
> /proc/locks does not always print the correct inode number/device pair.
> Update lock_get_status() to use vfs_map_unique_ino_dev() to get the real,
> unique values for userspace.
> 
> Signed-off-by: Mark Fasheh <mfasheh@suse.de>
> ---
>  fs/locks.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/fs/locks.c b/fs/locks.c
> index db7b6917d9c5..3a012df87fd8 100644
> --- a/fs/locks.c
> +++ b/fs/locks.c
> @@ -2621,6 +2621,7 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
>  			    loff_t id, char *pfx)
>  {
>  	struct inode *inode = NULL;
> +	struct dentry *dentry;
>  	unsigned int fl_pid;
>  	struct pid_namespace *proc_pidns = file_inode(f->file)->i_sb->s_fs_info;
>  
> @@ -2633,8 +2634,10 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
>  	if (fl_pid == 0)
>  		return;
>  
> -	if (fl->fl_file != NULL)
> +	if (fl->fl_file != NULL) {
>  		inode = locks_inode(fl->fl_file);
> +		dentry = file_dentry(fl->fl_file);
> +	}
>  
>  	seq_printf(f, "%lld:%s ", id, pfx);
>  	if (IS_POSIX(fl)) {
> @@ -2681,10 +2684,13 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
>  			       : (fl->fl_type == F_WRLCK) ? "WRITE" : "READ ");
>  	}
>  	if (inode) {
> +		__u64 ino;
> +		dev_t dev;
> +
> +		vfs_map_unique_ino_dev(dentry, &ino, &dev);

This code is under a spinlock (blocked_locks_lock or ctx->flc_lock). I
don't think it'll be ok to call ->getattr while holding a spinlock.

>  		/* userspace relies on this representation of dev_t */
>  		seq_printf(f, "%d %02x:%02x:%ld ", fl_pid,
> -				MAJOR(inode->i_sb->s_dev),
> -				MINOR(inode->i_sb->s_dev), inode->i_ino);
> +				MAJOR(dev), MINOR(dev), inode->i_ino);
>  	} else {
>  		seq_printf(f, "%d <none>:0 ", fl_pid);
>  	}

-- 
Jeff Layton <jlayton@poochiereds.net>

Re: [PATCH 4/4] locks: map correct ino/dev pairs when exporting to userspace

[Mark Fasheh]

Hi Jeff,

On Wed, Aug 01, 2018 at 07:03:54AM -0400, Jeff Layton wrote:
> On Tue, 2018-07-31 at 14:10 -0700, Mark Fasheh wrote:
> > /proc/locks does not always print the correct inode number/device pair.
> > Update lock_get_status() to use vfs_map_unique_ino_dev() to get the real,
> > unique values for userspace.
> > 
> > Signed-off-by: Mark Fasheh <mfasheh@suse.de>
> > ---
> >  fs/locks.c | 12 +++++++++---
> >  1 file changed, 9 insertions(+), 3 deletions(-)
> > 
> > diff --git a/fs/locks.c b/fs/locks.c
> > index db7b6917d9c5..3a012df87fd8 100644
> > --- a/fs/locks.c
> > +++ b/fs/locks.c
> > @@ -2621,6 +2621,7 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
> >  			    loff_t id, char *pfx)
> >  {
> >  	struct inode *inode = NULL;
> > +	struct dentry *dentry;
> >  	unsigned int fl_pid;
> >  	struct pid_namespace *proc_pidns = file_inode(f->file)->i_sb->s_fs_info;
> >  
> > @@ -2633,8 +2634,10 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
> >  	if (fl_pid == 0)
> >  		return;
> >  
> > -	if (fl->fl_file != NULL)
> > +	if (fl->fl_file != NULL) {
> >  		inode = locks_inode(fl->fl_file);
> > +		dentry = file_dentry(fl->fl_file);
> > +	}
> >  
> >  	seq_printf(f, "%lld:%s ", id, pfx);
> >  	if (IS_POSIX(fl)) {
> > @@ -2681,10 +2684,13 @@ static void lock_get_status(struct seq_file *f, struct file_lock *fl,
> >  			       : (fl->fl_type == F_WRLCK) ? "WRITE" : "READ ");
> >  	}
> >  	if (inode) {
> > +		__u64 ino;
> > +		dev_t dev;
> > +
> > +		vfs_map_unique_ino_dev(dentry, &ino, &dev);
> 
> This code is under a spinlock (blocked_locks_lock or ctx->flc_lock). I
> don't think it'll be ok to call ->getattr while holding a spinlock.

Hmm, indeed it does call under spinlock. I'll hve to rethink how to approach
this in fs/locks.c

Thanks,
	--Mark

Re: [RFC PATCH 0/4] vfs: map unique ino/dev pairs for user space

[J. R. Okajima]

Mark Fasheh:
> The following patches fix these inconsistencies by introducing a VFS helper
> function which calls the underlying filesystem ->getattr to get our real
> inode number / device pair.  The returned values can then be used at those
> places in the kernel where we are incorrectly reporting our ino/dev pair. 
> We then update fs/proc/ and fs/locks.c to use this helper when writing to
> /proc/PID/maps and /proc/locks respectively.

I definitly agree that ino/dev pair should be a unique identity on the
system.  But I don't know why you are tryng to solve the problem in
generic VFS layer instead of the problematic FS.  Isn't it an
unnecessary overhead for many FS?
How about creating a new f_op member ->get_ino_dev(), ->show_identity()
or something, and implement the new f_op in the problematic FS only?
I hope it will be a lighter way to get the pair than generic getattr
way.


J. R. Okajima