From: Jisheng.Zhang@synaptics.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next] net: mvneta: fix mvneta_config_rss on armada 3700
Date: Fri, 10 Aug 2018 11:36:27 +0800 [thread overview]
Message-ID: <20180810113627.5dec5d40@xhacker.debian> (raw)
The mvneta Ethernet driver is used on a few different Marvell SoCs.
Some SoCs have per cpu interrupts for Ethernet events, the driver uses
a per CPU napi structure for this case. Some SoCs such as armada 3700
have a single interrupt for Ethernet events, the driver uses a global
napi structure for this case.
Current mvneta_config_rss() always operates the per cpu napi structure.
Fix it by operating a global napi for "single interrupt" case, and per
cpu napi structure for remaining cases.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC")
---
drivers/net/ethernet/marvell/mvneta.c | 31 +++++++++++++++++----------
1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 55c2a56c5dae..bc80a678abc3 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4107,13 +4107,18 @@ static int mvneta_config_rss(struct mvneta_port *pp)
on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
- /* We have to synchronise on the napi of each CPU */
- for_each_online_cpu(cpu) {
- struct mvneta_pcpu_port *pcpu_port =
- per_cpu_ptr(pp->ports, cpu);
+ if (!pp->neta_armada3700) {
+ /* We have to synchronise on the napi of each CPU */
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *pcpu_port =
+ per_cpu_ptr(pp->ports, cpu);
- napi_synchronize(&pcpu_port->napi);
- napi_disable(&pcpu_port->napi);
+ napi_synchronize(&pcpu_port->napi);
+ napi_disable(&pcpu_port->napi);
+ }
+ } else {
+ napi_synchronize(&pp->napi);
+ napi_disable(&pp->napi);
}
pp->rxq_def = pp->indir[0];
@@ -4130,12 +4135,16 @@ static int mvneta_config_rss(struct mvneta_port *pp)
mvneta_percpu_elect(pp);
spin_unlock(&pp->lock);
- /* We have to synchronise on the napi of each CPU */
- for_each_online_cpu(cpu) {
- struct mvneta_pcpu_port *pcpu_port =
- per_cpu_ptr(pp->ports, cpu);
+ if (!pp->neta_armada3700) {
+ /* We have to synchronise on the napi of each CPU */
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *pcpu_port =
+ per_cpu_ptr(pp->ports, cpu);
- napi_enable(&pcpu_port->napi);
+ napi_enable(&pcpu_port->napi);
+ }
+ } else {
+ napi_enable(&pp->napi);
}
netif_tx_start_all_queues(pp->dev);
--
2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
To: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
"David S. Miller" <davem@davemloft.net>,
Andrew Lunn <andrew@lunn.ch>
Cc: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next] net: mvneta: fix mvneta_config_rss on armada 3700
Date: Fri, 10 Aug 2018 11:36:27 +0800 [thread overview]
Message-ID: <20180810113627.5dec5d40@xhacker.debian> (raw)
The mvneta Ethernet driver is used on a few different Marvell SoCs.
Some SoCs have per cpu interrupts for Ethernet events, the driver uses
a per CPU napi structure for this case. Some SoCs such as armada 3700
have a single interrupt for Ethernet events, the driver uses a global
napi structure for this case.
Current mvneta_config_rss() always operates the per cpu napi structure.
Fix it by operating a global napi for "single interrupt" case, and per
cpu napi structure for remaining cases.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC")
---
drivers/net/ethernet/marvell/mvneta.c | 31 +++++++++++++++++----------
1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 55c2a56c5dae..bc80a678abc3 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4107,13 +4107,18 @@ static int mvneta_config_rss(struct mvneta_port *pp)
on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
- /* We have to synchronise on the napi of each CPU */
- for_each_online_cpu(cpu) {
- struct mvneta_pcpu_port *pcpu_port =
- per_cpu_ptr(pp->ports, cpu);
+ if (!pp->neta_armada3700) {
+ /* We have to synchronise on the napi of each CPU */
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *pcpu_port =
+ per_cpu_ptr(pp->ports, cpu);
- napi_synchronize(&pcpu_port->napi);
- napi_disable(&pcpu_port->napi);
+ napi_synchronize(&pcpu_port->napi);
+ napi_disable(&pcpu_port->napi);
+ }
+ } else {
+ napi_synchronize(&pp->napi);
+ napi_disable(&pp->napi);
}
pp->rxq_def = pp->indir[0];
@@ -4130,12 +4135,16 @@ static int mvneta_config_rss(struct mvneta_port *pp)
mvneta_percpu_elect(pp);
spin_unlock(&pp->lock);
- /* We have to synchronise on the napi of each CPU */
- for_each_online_cpu(cpu) {
- struct mvneta_pcpu_port *pcpu_port =
- per_cpu_ptr(pp->ports, cpu);
+ if (!pp->neta_armada3700) {
+ /* We have to synchronise on the napi of each CPU */
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *pcpu_port =
+ per_cpu_ptr(pp->ports, cpu);
- napi_enable(&pcpu_port->napi);
+ napi_enable(&pcpu_port->napi);
+ }
+ } else {
+ napi_enable(&pp->napi);
}
netif_tx_start_all_queues(pp->dev);
--
2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
To: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
"David S. Miller" <davem@davemloft.net>,
Andrew Lunn <andrew@lunn.ch>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next] net: mvneta: fix mvneta_config_rss on armada 3700
Date: Fri, 10 Aug 2018 11:36:27 +0800 [thread overview]
Message-ID: <20180810113627.5dec5d40@xhacker.debian> (raw)
The mvneta Ethernet driver is used on a few different Marvell SoCs.
Some SoCs have per cpu interrupts for Ethernet events, the driver uses
a per CPU napi structure for this case. Some SoCs such as armada 3700
have a single interrupt for Ethernet events, the driver uses a global
napi structure for this case.
Current mvneta_config_rss() always operates the per cpu napi structure.
Fix it by operating a global napi for "single interrupt" case, and per
cpu napi structure for remaining cases.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC")
---
drivers/net/ethernet/marvell/mvneta.c | 31 +++++++++++++++++----------
1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 55c2a56c5dae..bc80a678abc3 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4107,13 +4107,18 @@ static int mvneta_config_rss(struct mvneta_port *pp)
on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
- /* We have to synchronise on the napi of each CPU */
- for_each_online_cpu(cpu) {
- struct mvneta_pcpu_port *pcpu_port =
- per_cpu_ptr(pp->ports, cpu);
+ if (!pp->neta_armada3700) {
+ /* We have to synchronise on the napi of each CPU */
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *pcpu_port =
+ per_cpu_ptr(pp->ports, cpu);
- napi_synchronize(&pcpu_port->napi);
- napi_disable(&pcpu_port->napi);
+ napi_synchronize(&pcpu_port->napi);
+ napi_disable(&pcpu_port->napi);
+ }
+ } else {
+ napi_synchronize(&pp->napi);
+ napi_disable(&pp->napi);
}
pp->rxq_def = pp->indir[0];
@@ -4130,12 +4135,16 @@ static int mvneta_config_rss(struct mvneta_port *pp)
mvneta_percpu_elect(pp);
spin_unlock(&pp->lock);
- /* We have to synchronise on the napi of each CPU */
- for_each_online_cpu(cpu) {
- struct mvneta_pcpu_port *pcpu_port =
- per_cpu_ptr(pp->ports, cpu);
+ if (!pp->neta_armada3700) {
+ /* We have to synchronise on the napi of each CPU */
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *pcpu_port =
+ per_cpu_ptr(pp->ports, cpu);
- napi_enable(&pcpu_port->napi);
+ napi_enable(&pcpu_port->napi);
+ }
+ } else {
+ napi_enable(&pp->napi);
}
netif_tx_start_all_queues(pp->dev);
--
2.18.0
next reply other threads:[~2018-08-10 3:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-10 3:36 Jisheng Zhang [this message]
2018-08-10 3:36 ` [PATCH net-next] net: mvneta: fix mvneta_config_rss on armada 3700 Jisheng Zhang
2018-08-10 3:36 ` Jisheng Zhang
2018-08-10 13:36 ` Andrew Lunn
2018-08-10 13:36 ` Andrew Lunn
2018-08-10 21:40 ` David Miller
2018-08-10 21:40 ` David Miller
2018-08-10 22:23 ` Andrew Lunn
2018-08-10 22:23 ` Andrew Lunn
2018-08-10 22:23 ` Andrew Lunn
2018-08-11 2:11 ` David Miller
2018-08-11 2:11 ` David Miller
2018-08-19 17:49 ` David Miller
2018-08-19 17:49 ` David Miller
2018-08-19 17:49 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180810113627.5dec5d40@xhacker.debian \
--to=jisheng.zhang@synaptics.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.