All of lore.kernel.org
 help / color / mirror / Atom feed
From: mathieu.poirier@linaro.org (Mathieu Poirier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/13] coresight: etm3: Add support for handling errors
Date: Wed, 15 Aug 2018 13:34:56 -0600	[thread overview]
Message-ID: <20180815193456.GA17954@xps15> (raw)
In-Reply-To: <1533562915-21558-6-git-send-email-suzuki.poulose@arm.com>

On Mon, Aug 06, 2018 at 02:41:47PM +0100, Suzuki K Poulose wrote:
> Add support for reporting errors back from the SMP cross
> function call for enabling ETM.
> 
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
>  drivers/hwtracing/coresight/coresight-etm3x.c | 42 ++++++++++++++++++---------
>  1 file changed, 28 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c
> index 9ce8fba..771691c 100644
> --- a/drivers/hwtracing/coresight/coresight-etm3x.c
> +++ b/drivers/hwtracing/coresight/coresight-etm3x.c
> @@ -355,11 +355,10 @@ static int etm_parse_event_config(struct etm_drvdata *drvdata,
>  	return 0;
>  }
>  
> -static void etm_enable_hw(void *info)
> +static int etm_enable_hw(struct etm_drvdata *drvdata)
>  {
>  	int i;
>  	u32 etmcr;
> -	struct etm_drvdata *drvdata = info;
>  	struct etm_config *config = &drvdata->config;
>  
>  	CS_UNLOCK(drvdata->base);
> @@ -421,6 +420,21 @@ static void etm_enable_hw(void *info)
>  	CS_LOCK(drvdata->base);
>  
>  	dev_dbg(drvdata->dev, "cpu: %d enable smp call done\n", drvdata->cpu);
> +	return 0;
> +}
> +
> +struct etm_enable_arg {
> +	struct etm_drvdata *drvdata;
> +	int rc;
> +}

This doesn't compile a ';' is missing.

> +
> +static void etm_enable_hw_smp_call(void *info)
> +{
> +	struct etm_enable_arg *arg = info;
> +
> +	if (WARN_ON(!arg))
> +		return;
> +	arg->rc = etm_enable_hw(arg->drvdata);
>  }
>  
>  static int etm_cpu_id(struct coresight_device *csdev)
> @@ -475,14 +489,13 @@ static int etm_enable_perf(struct coresight_device *csdev,
>  	/* Configure the tracer based on the session's specifics */
>  	etm_parse_event_config(drvdata, event);
>  	/* And enable it */
> -	etm_enable_hw(drvdata);
> -
> -	return 0;
> +	return etm_enable_hw(drvdata);
>  }
>  
>  static int etm_enable_sysfs(struct coresight_device *csdev)
>  {
>  	struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
> +	struct etm_enable_arg arg = { 0 };
>  	int ret;
>  
>  	spin_lock(&drvdata->spinlock);
> @@ -492,20 +505,21 @@ static int etm_enable_sysfs(struct coresight_device *csdev)
>  	 * hw configuration will take place on the local CPU during bring up.
>  	 */
>  	if (cpu_online(drvdata->cpu)) {
> +		arg.drvdata = drvdata;
>  		ret = smp_call_function_single(drvdata->cpu,
> -					       etm_enable_hw, drvdata, 1);
> -		if (ret)
> -			goto err;
> +					       etm_enable_hw_smp_call, &arg, 1);
> +		if (!ret)
> +			ret = arg.rc;
> +		if (!ret)
> +			drvdata->sticky_enable = true;
> +	} else {
> +		ret = -ENODEV;
>  	}
>  
> -	drvdata->sticky_enable = true;
>  	spin_unlock(&drvdata->spinlock);
>  
> -	dev_dbg(drvdata->dev, "ETM tracing enabled\n");
> -	return 0;
> -
> -err:
> -	spin_unlock(&drvdata->spinlock);
> +	if (!ret)
> +		dev_dbg(drvdata->dev, "ETM tracing enabled\n");
>  	return ret;
>  }
>  
> -- 
> 2.7.4
> 

WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, robert.walker@arm.com,
	mike.leach@arm.com
Subject: Re: [PATCH 05/13] coresight: etm3: Add support for handling errors
Date: Wed, 15 Aug 2018 13:34:56 -0600	[thread overview]
Message-ID: <20180815193456.GA17954@xps15> (raw)
In-Reply-To: <1533562915-21558-6-git-send-email-suzuki.poulose@arm.com>

On Mon, Aug 06, 2018 at 02:41:47PM +0100, Suzuki K Poulose wrote:
> Add support for reporting errors back from the SMP cross
> function call for enabling ETM.
> 
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
>  drivers/hwtracing/coresight/coresight-etm3x.c | 42 ++++++++++++++++++---------
>  1 file changed, 28 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c
> index 9ce8fba..771691c 100644
> --- a/drivers/hwtracing/coresight/coresight-etm3x.c
> +++ b/drivers/hwtracing/coresight/coresight-etm3x.c
> @@ -355,11 +355,10 @@ static int etm_parse_event_config(struct etm_drvdata *drvdata,
>  	return 0;
>  }
>  
> -static void etm_enable_hw(void *info)
> +static int etm_enable_hw(struct etm_drvdata *drvdata)
>  {
>  	int i;
>  	u32 etmcr;
> -	struct etm_drvdata *drvdata = info;
>  	struct etm_config *config = &drvdata->config;
>  
>  	CS_UNLOCK(drvdata->base);
> @@ -421,6 +420,21 @@ static void etm_enable_hw(void *info)
>  	CS_LOCK(drvdata->base);
>  
>  	dev_dbg(drvdata->dev, "cpu: %d enable smp call done\n", drvdata->cpu);
> +	return 0;
> +}
> +
> +struct etm_enable_arg {
> +	struct etm_drvdata *drvdata;
> +	int rc;
> +}

This doesn't compile a ';' is missing.

> +
> +static void etm_enable_hw_smp_call(void *info)
> +{
> +	struct etm_enable_arg *arg = info;
> +
> +	if (WARN_ON(!arg))
> +		return;
> +	arg->rc = etm_enable_hw(arg->drvdata);
>  }
>  
>  static int etm_cpu_id(struct coresight_device *csdev)
> @@ -475,14 +489,13 @@ static int etm_enable_perf(struct coresight_device *csdev,
>  	/* Configure the tracer based on the session's specifics */
>  	etm_parse_event_config(drvdata, event);
>  	/* And enable it */
> -	etm_enable_hw(drvdata);
> -
> -	return 0;
> +	return etm_enable_hw(drvdata);
>  }
>  
>  static int etm_enable_sysfs(struct coresight_device *csdev)
>  {
>  	struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
> +	struct etm_enable_arg arg = { 0 };
>  	int ret;
>  
>  	spin_lock(&drvdata->spinlock);
> @@ -492,20 +505,21 @@ static int etm_enable_sysfs(struct coresight_device *csdev)
>  	 * hw configuration will take place on the local CPU during bring up.
>  	 */
>  	if (cpu_online(drvdata->cpu)) {
> +		arg.drvdata = drvdata;
>  		ret = smp_call_function_single(drvdata->cpu,
> -					       etm_enable_hw, drvdata, 1);
> -		if (ret)
> -			goto err;
> +					       etm_enable_hw_smp_call, &arg, 1);
> +		if (!ret)
> +			ret = arg.rc;
> +		if (!ret)
> +			drvdata->sticky_enable = true;
> +	} else {
> +		ret = -ENODEV;
>  	}
>  
> -	drvdata->sticky_enable = true;
>  	spin_unlock(&drvdata->spinlock);
>  
> -	dev_dbg(drvdata->dev, "ETM tracing enabled\n");
> -	return 0;
> -
> -err:
> -	spin_unlock(&drvdata->spinlock);
> +	if (!ret)
> +		dev_dbg(drvdata->dev, "ETM tracing enabled\n");
>  	return ret;
>  }
>  
> -- 
> 2.7.4
> 

  reply	other threads:[~2018-08-15 19:34 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-06 13:41 [PATCH 00/13] coresight: Implement device claim protocol Suzuki K Poulose
2018-08-06 13:41 ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 01/13] coresight: tmc-etr: Refactor for handling errors Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 02/13] coresight: tmc-etr: Handle errors enabling CATU Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 03/13] coresight: tmc-etb/etf: Prepare to handle errors enabling Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-15 19:22   ` Mathieu Poirier
2018-08-15 19:22     ` Mathieu Poirier
2018-08-16 14:47     ` Suzuki K Poulose
2018-08-16 14:47       ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 04/13] coresight: etm4x: Add support for handling errors Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 05/13] coresight: etm3: " Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-15 19:34   ` Mathieu Poirier [this message]
2018-08-15 19:34     ` Mathieu Poirier
2018-08-16 15:45     ` Suzuki K Poulose
2018-08-16 15:45       ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 06/13] coresight: etb10: Handle errors enabling the device Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-14 17:40   ` Mathieu Poirier
2018-08-14 17:40     ` Mathieu Poirier
2018-08-15 19:38   ` Mathieu Poirier
2018-08-15 19:38     ` Mathieu Poirier
2018-08-16 15:46     ` Suzuki K Poulose
2018-08-16 15:46       ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 07/13] coresight: dynamic-replicator: Handle multiple connections Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 08/13] coresight: Add support for CLAIM tag protocol Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-14 23:20   ` Mathieu Poirier
2018-08-14 23:20     ` Mathieu Poirier
2018-08-16 15:47     ` Suzuki K Poulose
2018-08-16 15:47       ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 09/13] coresight: etmx: Claim devices before use Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-14 23:43   ` Mathieu Poirier
2018-08-14 23:43     ` Mathieu Poirier
2018-08-06 13:41 ` [PATCH 10/13] coresight: funnel: " Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 11/13] coresight: catu: Claim device " Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 12/13] coresight: dynamic-replicator: Claim device for use Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose
2018-08-06 13:41 ` [PATCH 13/13] coreisght: tmc: Claim device before use Suzuki K Poulose
2018-08-06 13:41   ` Suzuki K Poulose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180815193456.GA17954@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.