* [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node @ 2018-08-29 3:30 ` Yinbo Zhu 0 siblings, 0 replies; 4+ messages in thread From: Yinbo Zhu @ 2018-08-29 3:30 UTC (permalink / raw) To: linux-arm-kernel From: Rajesh Bhagat <rajesh.bhagat@freescale.com> Add "configure-gfladj" boolean property to USB3 node. This property is used to determine whether frame length adjustment is required or not Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> --- Change in v2: Modified some word misspellings in commit information arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 7881e3d..ed3fa79 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -609,6 +609,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + configure-gfladj; }; usb1: usb3 at 3000000 { @@ -618,6 +619,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + configure-gfladj; }; usb2: usb3 at 3100000 { @@ -627,6 +629,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + configure-gfladj; }; sata: sata at 3200000 { -- 1.7.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node @ 2018-08-29 3:30 ` Yinbo Zhu 0 siblings, 0 replies; 4+ messages in thread From: Yinbo Zhu @ 2018-08-29 3:30 UTC (permalink / raw) To: yinbo.zhu, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Ran Wang, linux-kernel Cc: xiaobo.xie, Shawn Guo, Minghuan Lian, Yuantian Tang, Hou Zhiqiang, Changming Huang, Sumit Garg, Fabio Estevam, Li Yang, devicetree, linux-arm-kernel, Rajesh Bhagat From: Rajesh Bhagat <rajesh.bhagat@freescale.com> Add "configure-gfladj" boolean property to USB3 node. This property is used to determine whether frame length adjustment is required or not Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> --- Change in v2: Modified some word misspellings in commit information arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 7881e3d..ed3fa79 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -609,6 +609,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + configure-gfladj; }; usb1: usb3@3000000 { @@ -618,6 +619,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + configure-gfladj; }; usb2: usb3@3100000 { @@ -627,6 +629,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + configure-gfladj; }; sata: sata@3200000 { -- 1.7.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node 2018-08-29 3:30 ` Yinbo Zhu @ 2018-09-03 1:05 ` Shawn Guo -1 siblings, 0 replies; 4+ messages in thread From: Shawn Guo @ 2018-09-03 1:05 UTC (permalink / raw) To: linux-arm-kernel On Wed, Aug 29, 2018 at 11:30:55AM +0800, Yinbo Zhu wrote: > From: Rajesh Bhagat <rajesh.bhagat@freescale.com> > > Add "configure-gfladj" boolean property to USB3 node. This property I do not see where this property is documented as bindings and how driver is using it. Shawn > is used to determine whether frame length adjustment is required or > not > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> > --- > Change in v2: > Modified some word misspellings in commit information > > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > index 7881e3d..ed3fa79 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > @@ -609,6 +609,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > usb1: usb3 at 3000000 { > @@ -618,6 +619,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > usb2: usb3 at 3100000 { > @@ -627,6 +629,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > sata: sata at 3200000 { > -- > 1.7.1 > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node @ 2018-09-03 1:05 ` Shawn Guo 0 siblings, 0 replies; 4+ messages in thread From: Shawn Guo @ 2018-09-03 1:05 UTC (permalink / raw) To: Yinbo Zhu Cc: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Ran Wang, linux-kernel, xiaobo.xie, Minghuan Lian, Yuantian Tang, Hou Zhiqiang, Changming Huang, Sumit Garg, Fabio Estevam, Li Yang, devicetree, linux-arm-kernel, Rajesh Bhagat On Wed, Aug 29, 2018 at 11:30:55AM +0800, Yinbo Zhu wrote: > From: Rajesh Bhagat <rajesh.bhagat@freescale.com> > > Add "configure-gfladj" boolean property to USB3 node. This property I do not see where this property is documented as bindings and how driver is using it. Shawn > is used to determine whether frame length adjustment is required or > not > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> > --- > Change in v2: > Modified some word misspellings in commit information > > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > index 7881e3d..ed3fa79 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > @@ -609,6 +609,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > usb1: usb3@3000000 { > @@ -618,6 +619,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > usb2: usb3@3100000 { > @@ -627,6 +629,7 @@ > dr_mode = "host"; > snps,quirk-frame-length-adjustment = <0x20>; > snps,dis_rxdet_inp3_quirk; > + configure-gfladj; > }; > > sata: sata@3200000 { > -- > 1.7.1 > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-09-03 1:05 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-08-29 3:30 [PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node Yinbo Zhu 2018-08-29 3:30 ` Yinbo Zhu 2018-09-03 1:05 ` Shawn Guo 2018-09-03 1:05 ` Shawn Guo
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.