From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm64: dts: ti: k3-am6: Add Device Management Security Controller support
Date: Wed, 5 Sep 2018 11:20:24 -0500 [thread overview]
Message-ID: <20180905162024.28243-4-nm@ti.com> (raw)
In-Reply-To: <20180905162024.28243-1-nm@ti.com>
Add TISCI compatible System controller for AM6 SoCs.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 8b4378d4d0a3..affc3c309353 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -6,6 +6,34 @@
*/
&cbass_wakeup {
+ dmsc: dmsc {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mbox-names = "rx", "tx";
+
+ mboxes= <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k3_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
wkup_uart0: serial at 42300000 {
compatible = "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
--
2.15.1
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Tero Kristo <t-kristo@ti.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Tony Lindgren <tony@atomide.com>, Vignesh R <vigneshr@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH 3/3] arm64: dts: ti: k3-am6: Add Device Management Security Controller support
Date: Wed, 5 Sep 2018 11:20:24 -0500 [thread overview]
Message-ID: <20180905162024.28243-4-nm@ti.com> (raw)
In-Reply-To: <20180905162024.28243-1-nm@ti.com>
Add TISCI compatible System controller for AM6 SoCs.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 8b4378d4d0a3..affc3c309353 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -6,6 +6,34 @@
*/
&cbass_wakeup {
+ dmsc: dmsc {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mbox-names = "rx", "tx";
+
+ mboxes= <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k3_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
wkup_uart0: serial@42300000 {
compatible = "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
--
2.15.1
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Tero Kristo <t-kristo@ti.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Tony Lindgren <tony@atomide.com>, Vignesh R <vigneshr@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH 3/3] arm64: dts: ti: k3-am6: Add Device Management Security Controller support
Date: Wed, 5 Sep 2018 11:20:24 -0500 [thread overview]
Message-ID: <20180905162024.28243-4-nm@ti.com> (raw)
In-Reply-To: <20180905162024.28243-1-nm@ti.com>
Add TISCI compatible System controller for AM6 SoCs.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 8b4378d4d0a3..affc3c309353 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -6,6 +6,34 @@
*/
&cbass_wakeup {
+ dmsc: dmsc {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mbox-names = "rx", "tx";
+
+ mboxes= <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k3_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
wkup_uart0: serial@42300000 {
compatible = "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
--
2.15.1
next prev parent reply other threads:[~2018-09-05 16:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-05 16:20 [PATCH 0/3] arm64: dts: ti: am654: Enable additional nodes Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon
2018-09-05 16:20 ` [PATCH 1/3] arm64: dts: ti: am654: Add uart nodes Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon
2018-09-05 16:20 ` [PATCH 2/3] arm64: dts: ti: am654: Add secure proxy instance for main domain Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon [this message]
2018-09-05 16:20 ` [PATCH 3/3] arm64: dts: ti: k3-am6: Add Device Management Security Controller support Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon
2018-09-05 20:33 ` [PATCH 0/3] arm64: dts: ti: am654: Enable additional nodes Tony Lindgren
2018-09-05 20:33 ` Tony Lindgren
2018-09-19 18:42 ` Tero Kristo
2018-09-19 18:42 ` Tero Kristo
2018-09-19 18:42 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180905162024.28243-4-nm@ti.com \
--to=nm@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.