From: Dan Murphy <dmurphy@ti.com>
To: robh+dt@kernel.org, jacek.anaszewski@gmail.com, pavel@ucw.cz
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
lee.jones@linaro.org, linux-omap@vger.kernel.org,
linux-leds@vger.kernel.org, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v7 1/6] dt-bindings: ti-lmu: Remove LM3697
Date: Tue, 11 Sep 2018 12:08:20 -0500 [thread overview]
Message-ID: <20180911170825.17789-2-dmurphy@ti.com> (raw)
In-Reply-To: <20180911170825.17789-1-dmurphy@ti.com>
Remove support for the LM3697 LED device
from the ti-lmu. The LM3697 will be supported
via a stand alone LED driver.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
v7 - New change for the series based on the comments in https://lore.kernel.org/patchwork/patch/982550/
.../devicetree/bindings/mfd/ti-lmu.txt | 26 +------------------
1 file changed, 1 insertion(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index c885cf89b8ce..920f910be4e9 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -9,7 +9,6 @@ TI LMU driver supports lighting devices below.
LM3632 Backlight and regulator
LM3633 Backlight, LED and fault monitor
LM3695 Backlight
- LM3697 Backlight and fault monitor
Required properties:
- compatible: Should be one of:
@@ -18,11 +17,10 @@ Required properties:
"ti,lm3632"
"ti,lm3633"
"ti,lm3695"
- "ti,lm3697"
- reg: I2C slave address.
0x11 for LM3632
0x29 for LM3631
- 0x36 for LM3633, LM3697
+ 0x36 for LM3633
0x38 for LM3532
0x63 for LM3695
@@ -38,7 +36,6 @@ Optional nodes:
Required properties:
- compatible: Should be one of:
"ti,lm3633-fault-monitor"
- "ti,lm3697-fault-monitor"
- leds: LED properties for LM3633. Please refer to [2].
- regulators: Regulator properties for LM3631 and LM3632.
Please refer to [3].
@@ -220,24 +217,3 @@ lm3695@63 {
};
};
};
-
-lm3697@36 {
- compatible = "ti,lm3697";
- reg = <0x36>;
-
- enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
- backlight {
- compatible = "ti,lm3697-backlight";
-
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <200>;
- ramp-down-msec = <200>;
- };
- };
-
- fault-monitor {
- compatible = "ti,lm3697-fault-monitor";
- };
-};
--
2.17.0.1855.g63749b2dea
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com>
To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lee.jones@linaro.org>, <linux-omap@vger.kernel.org>,
<linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v7 1/6] dt-bindings: ti-lmu: Remove LM3697
Date: Tue, 11 Sep 2018 12:08:20 -0500 [thread overview]
Message-ID: <20180911170825.17789-2-dmurphy@ti.com> (raw)
In-Reply-To: <20180911170825.17789-1-dmurphy@ti.com>
Remove support for the LM3697 LED device
from the ti-lmu. The LM3697 will be supported
via a stand alone LED driver.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
v7 - New change for the series based on the comments in https://lore.kernel.org/patchwork/patch/982550/
.../devicetree/bindings/mfd/ti-lmu.txt | 26 +------------------
1 file changed, 1 insertion(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index c885cf89b8ce..920f910be4e9 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -9,7 +9,6 @@ TI LMU driver supports lighting devices below.
LM3632 Backlight and regulator
LM3633 Backlight, LED and fault monitor
LM3695 Backlight
- LM3697 Backlight and fault monitor
Required properties:
- compatible: Should be one of:
@@ -18,11 +17,10 @@ Required properties:
"ti,lm3632"
"ti,lm3633"
"ti,lm3695"
- "ti,lm3697"
- reg: I2C slave address.
0x11 for LM3632
0x29 for LM3631
- 0x36 for LM3633, LM3697
+ 0x36 for LM3633
0x38 for LM3532
0x63 for LM3695
@@ -38,7 +36,6 @@ Optional nodes:
Required properties:
- compatible: Should be one of:
"ti,lm3633-fault-monitor"
- "ti,lm3697-fault-monitor"
- leds: LED properties for LM3633. Please refer to [2].
- regulators: Regulator properties for LM3631 and LM3632.
Please refer to [3].
@@ -220,24 +217,3 @@ lm3695@63 {
};
};
};
-
-lm3697@36 {
- compatible = "ti,lm3697";
- reg = <0x36>;
-
- enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
- backlight {
- compatible = "ti,lm3697-backlight";
-
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <200>;
- ramp-down-msec = <200>;
- };
- };
-
- fault-monitor {
- compatible = "ti,lm3697-fault-monitor";
- };
-};
--
2.17.0.1855.g63749b2dea
next prev parent reply other threads:[~2018-09-11 17:08 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-11 17:08 [PATCH v7 0/6] LM3697 dedicated LED driver Dan Murphy
2018-09-11 17:08 ` Dan Murphy
2018-09-11 17:08 ` Dan Murphy [this message]
2018-09-11 17:08 ` [PATCH v7 1/6] dt-bindings: ti-lmu: Remove LM3697 Dan Murphy
2018-09-11 18:14 ` Lee Jones
2018-09-11 20:05 ` Pavel Machek
2018-09-11 21:48 ` Dan Murphy
2018-09-11 21:48 ` Dan Murphy
2018-09-12 21:49 ` Pavel Machek
2018-09-13 15:15 ` Dan Murphy
2018-09-13 15:15 ` Dan Murphy
2018-09-14 8:18 ` Pavel Machek
2018-09-14 20:15 ` Jacek Anaszewski
2018-09-14 20:15 ` Jacek Anaszewski
2018-09-14 21:42 ` Pavel Machek
2018-09-15 20:00 ` Jacek Anaszewski
2018-09-17 15:24 ` Dan Murphy
2018-09-17 15:24 ` Dan Murphy
2018-09-17 19:22 ` Jacek Anaszewski
2018-09-17 21:23 ` Dan Murphy
2018-09-17 21:23 ` Dan Murphy
2018-09-20 22:04 ` Pavel Machek
2018-09-21 12:44 ` Dan Murphy
2018-09-21 12:44 ` Dan Murphy
2018-09-14 8:23 ` Pavel Machek
2018-09-12 18:35 ` Jacek Anaszewski
2018-09-11 17:08 ` [PATCH v7 2/6] mfd: ti-lmu: Remove support for LM3697 Dan Murphy
2018-09-11 17:08 ` Dan Murphy
2018-09-11 18:13 ` Lee Jones
2018-09-11 17:08 ` [PATCH v7 3/6] dt-bindings: leds: Add bindings for lm3697 driver Dan Murphy
2018-09-11 17:08 ` Dan Murphy
2018-09-24 16:18 ` Rob Herring
2018-09-24 18:02 ` Pavel Machek
2018-09-25 19:39 ` Rob Herring
2018-09-25 21:19 ` Dan Murphy
2018-09-25 21:19 ` Dan Murphy
2018-09-11 17:08 ` [PATCH v7 4/6] leds: lm3697: Introduce the " Dan Murphy
2018-09-11 17:08 ` Dan Murphy
2018-09-11 17:08 ` [PATCH v7 5/6] dt-bindings: leds: Add runtime ramp node for LM3697 Dan Murphy
2018-09-11 17:08 ` Dan Murphy
2018-09-11 17:08 ` [PATCH v7 6/6] leds: lm3697: Add ramp rate feature Dan Murphy
2018-09-11 17:08 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180911170825.17789-2-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.