From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: ste: Fix SPI controller node names
Date: Thu, 13 Sep 2018 13:12:34 -0500 [thread overview]
Message-ID: <20180913181245.25484-10-robh@kernel.org> (raw)
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Please apply to the sub-arch tree. The dtc changes haven't landed, but
will for 4.20.
arch/arm/boot/dts/ste-dbx5x0.dtsi | 4 ++--
arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
arch/arm/boot/dts/ste-snowball.dts | 2 +-
arch/arm/boot/dts/ste-u300.dts | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768..8b5288172085 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -878,7 +878,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp at 80002000 {
+ spi at 80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -892,7 +892,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp at 80003000 {
+ spi at 80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 3f14b4df69b4..94eeb7f1c947 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
};
};
- ssp at 80002000 {
+ spi at 80002000 {
/*
* On the first generation boards, this SSP/SPI port was connected
* to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b0b94d053098..603890461ae0 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,7 +376,7 @@
pinctrl-1 = <&i2c3_sleep_mode>;
};
- ssp at 80002000 {
+ spi at 80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 62ecb6a2fa39..1bd1aba3322f 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,7 +442,7 @@
dma-names = "rx";
};
- spi: ssp at c0006000 {
+ spi: spi at c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH] ARM: dts: ste: Fix SPI controller node names
Date: Thu, 13 Sep 2018 13:12:34 -0500 [thread overview]
Message-ID: <20180913181245.25484-10-robh@kernel.org> (raw)
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Please apply to the sub-arch tree. The dtc changes haven't landed, but
will for 4.20.
arch/arm/boot/dts/ste-dbx5x0.dtsi | 4 ++--
arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
arch/arm/boot/dts/ste-snowball.dts | 2 +-
arch/arm/boot/dts/ste-u300.dts | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768..8b5288172085 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -878,7 +878,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80002000 {
+ spi@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -892,7 +892,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80003000 {
+ spi@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 3f14b4df69b4..94eeb7f1c947 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
};
};
- ssp@80002000 {
+ spi@80002000 {
/*
* On the first generation boards, this SSP/SPI port was connected
* to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b0b94d053098..603890461ae0 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,7 +376,7 @@
pinctrl-1 = <&i2c3_sleep_mode>;
};
- ssp@80002000 {
+ spi@80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 62ecb6a2fa39..1bd1aba3322f 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,7 +442,7 @@
dma-names = "rx";
};
- spi: ssp@c0006000 {
+ spi: spi@c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
--
2.17.1
next reply other threads:[~2018-09-13 18:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 18:12 Rob Herring [this message]
2018-09-13 18:12 ` [PATCH] ARM: dts: ste: Fix SPI controller node names Rob Herring
2018-09-20 22:00 ` Linus Walleij
2018-09-20 22:00 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913181245.25484-10-robh@kernel.org \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.